2019-07-02 01:54:35

by Anson Huang

Subject: [PATCH 1/2] arm64: dts: imx8mq: Add gpio-ranges property

From: Anson Huang <[email protected]>

Add "gpio-ranges" property to establish connections between GPIOs
and PINs on i.MX8MQ pinctrl driver.

Signed-off-by: Anson Huang <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 477c523..3187428 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -287,6 +287,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 10 30>;
};

gpio2: gpio@30210000 {
@@ -299,6 +300,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 40 21>;
};

gpio3: gpio@30220000 {
@@ -311,6 +313,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 61 26>;
};

gpio4: gpio@30230000 {
@@ -323,6 +326,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 87 32>;
};

gpio5: gpio@30240000 {
@@ -335,6 +339,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 119 30>;
};

tmu: tmu@30260000 {
--
2.7.4

2019-07-02 07:12:04

by Abel Vesa

Subject: Re: [PATCH 1/2] arm64: dts: imx8mq: Add gpio-ranges property

On 19-07-02 09:43:59, [email protected] wrote:
> From: Anson Huang <[email protected]>
>
> Add "gpio-ranges" property to establish connections between GPIOs
> and PINs on i.MX8MQ pinctrl driver.
>
> Signed-off-by: Anson Huang <[email protected]>

For both patches:

Reviewed-by: Abel Vesa <[email protected]>

> ---
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 477c523..3187428 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -287,6 +287,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> + gpio-ranges = <&iomuxc 0 10 30>;
> };
>
> gpio2: gpio@30210000 {
> @@ -299,6 +300,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> + gpio-ranges = <&iomuxc 0 40 21>;
> };
>
> gpio3: gpio@30220000 {
> @@ -311,6 +313,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> + gpio-ranges = <&iomuxc 0 61 26>;
> };
>
> gpio4: gpio@30230000 {
> @@ -323,6 +326,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> + gpio-ranges = <&iomuxc 0 87 32>;
> };
>
> gpio5: gpio@30240000 {
> @@ -335,6 +339,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> + gpio-ranges = <&iomuxc 0 119 30>;
> };
>
> tmu: tmu@30260000 {
> --
> 2.7.4
>

2019-07-18 08:18:26

by Shawn Guo

Subject: Re: [PATCH 1/2] arm64: dts: imx8mq: Add gpio-ranges property

On Tue, Jul 02, 2019 at 09:43:59AM +0800, [email protected] wrote:
> From: Anson Huang <[email protected]>
>
> Add "gpio-ranges" property to establish connections between GPIOs
> and PINs on i.MX8MQ pinctrl driver.
>
> Signed-off-by: Anson Huang <[email protected]>

Applied both, thanks.