Allwinner H6 SoC has a SPDIF controller called One Wire Audio (OWA) which
is different from the previous H3 generation and not compatible.
Difference are an increase of fifo sizes, some memory mapping are different
and there is now the possibility to output the master clock on a pin.
Actually all these features are unused and only a bit for flushing the TX
fifo is required.
Changes since v5:
- Move soundcard to board device-tree
Changes since v4:
- rename audio card name to sun50i-h6-spdif
- drop patches already merged
Changes since v3:
- rename reg_fctl_ftx to val_fctl_ftx
- rebase this series on sound-next
- fix dt-bindings due to change in sound-next
- change node name sound_spdif to sound-spdif
Changes since v2:
- Split quirks and H6 support patch
- Add specific section for quirks comment
Changes since v1:
- Remove H3 compatible
- Add TX fifo bit flush quirks
- Add H6 bindings in SPDIF driver
Clément Péron (2):
arm64: dts: allwinner: Add SPDIF node for Allwinner H6
arm64: dts: allwinner: h6: Enable SPDIF for Beelink GS1
.../dts/allwinner/sun50i-h6-beelink-gs1.dts | 22 +++++++++++++++++++
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 20 +++++++++++++++++
2 files changed, 42 insertions(+)
--
2.20.1
Beelink GS1 board has a SPDIF out connector, so enable it in
the device-tree and add a simple SPDIF soundcard.
Signed-off-by: Clément Péron <[email protected]>
---
.../dts/allwinner/sun50i-h6-beelink-gs1.dts | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 0dc33c90dd60..4bd14f085070 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -51,6 +51,24 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
+
+ sound-spdif {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sun50i-h6-spdif";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
};
&de {
@@ -243,6 +261,10 @@
vcc-pm-supply = <®_aldo1>;
};
+&spdif {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
--
2.20.1
On Mon, Aug 12, 2019 at 12:51:13PM +0200, Cl?ment P?ron wrote:
> Allwinner H6 SoC has a SPDIF controller called One Wire Audio (OWA) which
> is different from the previous H3 generation and not compatible.
>
> Difference are an increase of fifo sizes, some memory mapping are different
> and there is now the possibility to output the master clock on a pin.
>
> Actually all these features are unused and only a bit for flushing the TX
> fifo is required.
Applied both, thanks
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com