I have a 2 axis 6 button analog (ns558) gamepad. With 2.4.7,
everything is fine, as long as I pass js=gamepad, it detects the 2
axis and 6 buttons.
With 2.4.12, with js=gamepad, the kernel message SAYS it detects 2
axis and 6 buttons, however when I use it (for example, with the jstest
program), the two axis and buttons 4/5 don't register. The first four
(0-3) buttons are fine. If I reboot to 2.4.7 they all are fine, so it
is software.
I've also tried it with the bitfield method... I came up with 12531
decimal, which also says it detects 2 axis and 6 buttons, but same
effect, the axis and last two buttons don't work. Tried compiling it
in to the kernel, and as modules, no help. Tried js=auto, which thinks
the pad is 4 axis 4 buttons... none of the 4 axis work, but the 4
buttons do. With 2.4.7 and autodetect, it also thought there were 4
axis/4 buttons, but the first two axis worked fine, and the second two
were affected by the last two buttons. Also tried js=gamepad8 and
js=2btn, neither got the axis working.
Also, please check this Configure.help patch in, or something similar.
I've installed four 2.4 kernels, and *all* four on the first try I've
left out INPUT_JOYDEV because it says it's only for USB.
--- Configure.help.old Thu Oct 11 14:32:58 2001
+++ Configure.help Thu Oct 11 14:39:16 2001
@@ -11172,6 +11172,9 @@
Say Y here if you want to enable any of the USB HID options in the
USB support section which require Input core support.
+ This is also required for joysticks and gamepads which use classic
+ ISA (and serial? PCI?) gameports.
+
Otherwise, say N.
Keyboard support
@@ -11215,8 +11218,8 @@
Joystick support
CONFIG_INPUT_JOYDEV
- Say Y here if you want your USB HID joystick or gamepad to be
- accessible as char device 13:0+ - /dev/input/jsX device.
+ Say Y here if you want your joystick or gamepad to be accessible
+ as char device 13:0+ - /dev/input/jsX device.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
Cc me on replies, thanks.
--
Jeremy M. Dolan <mailto:[email protected]> <http://turbogeek.org/>
PGP: 1024D/DC433DEE 494C 7A6E 19FB 026A 1F52 E0D5 5C5D 6228 DC43 3DEE
OoO La nuit ayant d?j? recouvert d'encre ce jour du jeudi 11 octobre
2001, vers 23:06, Jeremy Dolan disait:
> I have a 2 axis 6 button analog (ns558) gamepad. With 2.4.7,
> everything is fine, as long as I pass js=gamepad, it detects the 2
> axis and 6 buttons.
> With 2.4.12, with js=gamepad, the kernel message SAYS it detects 2
> axis and 6 buttons, however when I use it (for example, with the jstest
> program), the two axis and buttons 4/5 don't register. The first four
> (0-3) buttons are fine. If I reboot to 2.4.7 they all are fine, so it
> is software.
I have similar problem when I have switched from 2.4.9 to 2.4.10 : I
have a two buttons, two axis joystick and the axis don't work.
--
I WILL NOT SELL SCHOOL PROPERTY
I WILL NOT SELL SCHOOL PROPERTY
I WILL NOT SELL SCHOOL PROPERTY
-+- Bart Simpson on chalkboard in episode 7F10