Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/Kconfig-nommu | 10 +++++-----
arch/arm/Kconfig.debug | 4 ++--
arch/arm/mach-ep93xx/Kconfig | 8 ++++----
arch/arm/mach-ixp4xx/Kconfig | 16 ++++++++--------
arch/arm/mach-mmp/Kconfig | 2 +-
arch/arm/mach-omap1/Kconfig | 14 +++++++-------
arch/arm/mach-prima2/Kconfig | 6 +++---
arch/arm/mach-s3c24xx/Kconfig | 4 ++--
arch/arm/mach-s3c64xx/Kconfig | 6 +++---
arch/arm/plat-samsung/Kconfig | 2 +-
10 files changed, 36 insertions(+), 36 deletions(-)
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
index 36c80d3dd93f..548419dc6f58 100644
--- a/arch/arm/Kconfig-nommu
+++ b/arch/arm/Kconfig-nommu
@@ -58,9 +58,9 @@ config ARM_MPU
depends on CPU_V7 || CPU_V7M
default y if CPU_V7
help
- Some ARM systems without an MMU have instead a Memory Protection
- Unit (MPU) that defines the type and permissions for regions of
- memory.
+ Some ARM systems without an MMU have instead a Memory Protection
+ Unit (MPU) that defines the type and permissions for regions of
+ memory.
- If your CPU has an MPU then you should choose 'y' here unless you
- know that you do not want to use the MPU.
+ If your CPU has an MPU then you should choose 'y' here unless you
+ know that you do not want to use the MPU.
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8bcbd0cd739b..0e5d52fbddbd 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -274,7 +274,7 @@ choice
select DEBUG_UART_8250
help
Say Y here if you want the debug print routines to direct
- their output to the CNS3xxx UART0.
+ their output to the CNS3xxx UART0.
config DEBUG_DAVINCI_DA8XX_UART1
bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
@@ -828,7 +828,7 @@ choice
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
- on Rockchip RV1108 based platforms.
+ on Rockchip RV1108 based platforms.
config DEBUG_RV1108_UART1
bool "Kernel low-level debugging messages via Rockchip RV1108 UART1"
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index f2db5fd38145..bf81dfab7f1b 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -126,10 +126,10 @@ config MACH_MICRO9S
Contec Micro9-Slim board.
config MACH_SIM_ONE
- bool "Support Simplemachines Sim.One board"
- help
- Say 'Y' here if you want your kernel to support the
- Simplemachines Sim.One board.
+ bool "Support Simplemachines Sim.One board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Simplemachines Sim.One board.
config MACH_SNAPPER_CL15
bool "Support Bluewater Systems Snapper CL15 Module"
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index f7211b57b1e7..484e8eb16baa 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -214,14 +214,14 @@ config IXP4XX_INDIRECT_PCI
bool "Use indirect PCI memory access"
depends on PCI
help
- IXP4xx provides two methods of accessing PCI memory space:
-
- 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
- To access PCI via this space, we simply ioremap() the BAR
- into the kernel and we can use the standard read[bwl]/write[bwl]
- macros. This is the preferred method due to speed but it
- limits the system to just 64MB of PCI memory. This can be
- problematic if using video cards and other memory-heavy devices.
+ IXP4xx provides two methods of accessing PCI memory space:
+
+ 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
+ To access PCI via this space, we simply ioremap() the BAR
+ into the kernel and we can use the standard read[bwl]/write[bwl]
+ macros. This is the preferred method due to speed but it
+ limits the system to just 64MB of PCI memory. This can be
+ problematic if using video cards and other memory-heavy devices.
2) If > 64MB of memory space is required, the IXP4xx can be
configured to use indirect registers to access the whole PCI
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index b58a03b18bde..1192aaaf5e90 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -168,7 +168,7 @@ config CPU_MMP2
Select code specific to MMP2. MMP2 is ARMv7 compatible.
config USB_EHCI_MV_U2O
- bool "EHCI support for PXA USB OTG controller"
+ bool "EHCI support for PXA USB OTG controller"
depends on USB_EHCI_MV
help
Enables support for OTG controller which can be switched to host mode.
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 948da556162e..d169efee7402 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -59,8 +59,8 @@ config MACH_OMAP_INNOVATOR
bool "TI Innovator"
depends on ARCH_OMAP15XX || ARCH_OMAP16XX
help
- TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
- have such a board.
+ TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
+ have such a board.
config MACH_OMAP_H2
bool "TI H2 Support"
@@ -87,7 +87,7 @@ config MACH_OMAP_OSK
depends on ARCH_OMAP16XX
help
TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
- if you have such a board.
+ if you have such a board.
config OMAP_OSK_MISTRAL
bool "Mistral QVGA board Support"
@@ -173,10 +173,10 @@ config MACH_OMAP_GENERIC
bool "Generic OMAP board"
depends on ARCH_OMAP15XX || ARCH_OMAP16XX
help
- Support for generic OMAP-1510, 1610 or 1710 board with
- no FPGA. Can be used as template for porting Linux to
- custom OMAP boards. Say Y here if you have a custom
- board.
+ Support for generic OMAP-1510, 1610 or 1710 board with
+ no FPGA. Can be used as template for porting Linux to
+ custom OMAP boards. Say Y here if you have a custom
+ board.
endmenu
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 6f66785fab01..88a76d265fd9 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -22,7 +22,7 @@ config ARCH_ATLAS6
default y
select SIRF_IRQ
help
- Support for CSR SiRFSoC ARM Cortex A9 Platform
+ Support for CSR SiRFSoC ARM Cortex A9 Platform
config ARCH_ATLAS7
bool "CSR SiRFSoC ATLAS7 ARM Cortex A7 Platform"
@@ -32,7 +32,7 @@ config ARCH_ATLAS7
select HAVE_ARM_SCU if SMP
select HAVE_SMP
help
- Support for CSR SiRFSoC ARM Cortex A7 Platform
+ Support for CSR SiRFSoC ARM Cortex A7 Platform
config ARCH_PRIMA2
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
@@ -41,7 +41,7 @@ config ARCH_PRIMA2
select ZONE_DMA
select PRIMA2_TIMER
help
- Support for CSR SiRFSoC ARM Cortex A9 Platform
+ Support for CSR SiRFSoC ARM Cortex A9 Platform
config SIRF_IRQ
bool
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 686f0bbde998..95db290637aa 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -141,8 +141,8 @@ config S3C2410_CPUFREQ_UTILS
bool
depends on ARM_S3C24XX_CPUFREQ
help
- Internal node to select timing code that is common to the s3c2410
- and s3c2440/s3c244 cpu frequency support.
+ Internal node to select timing code that is common to the s3c2410
+ and s3c2440/s3c244 cpu frequency support.
# cpu frequency support common to s3c2412, s3c2413 and s3c2442
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 5700822e3c74..125e50301d2a 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -202,7 +202,7 @@ config SMDK6410_SD_CH0
bool "Use channel 0 only"
depends on MACH_SMDK6410
help
- Select CON7 (channel 0) as the MMC/SD slot, as
+ Select CON7 (channel 0) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
@@ -211,7 +211,7 @@ config SMDK6410_SD_CH1
bool "Use channel 1 only"
depends on MACH_SMDK6410
help
- Select CON6 (channel 1) as the MMC/SD slot, as
+ Select CON6 (channel 1) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
@@ -257,7 +257,7 @@ config MACH_NCP
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
help
- Machine support for the Samsung NCP
+ Machine support for the Samsung NCP
config MACH_HMT
bool "Airgoo HMT"
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 301e572651c0..99ae92fa452a 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -250,7 +250,7 @@ config S3C_PM_DEBUG_LED_SMDK
bool "SMDK LED suspend/resume debugging"
depends on PM && (MACH_SMDK6410)
help
- Say Y here to enable the use of the SMDK LEDs on the baseboard
+ Say Y here to enable the use of the SMDK LEDs on the baseboard
for debugging of the state of the suspend and resume process.
Note, this currently only works for S3C64XX based SMDK boards.
--
2.17.1
Hi Krzysztof,
for the EP93xx part,
On Wed, 20 Nov 2019 21:37:34 +0800
Krzysztof Kozlowski <[email protected]> wrote:
> Adjust indentation from spaces to tab (+optional two spaces) as in
> coding style with command like:
> $ sed -e 's/^ /\t/' -i */Kconfig
>
Acked-by: Alexander Sverdlin <[email protected]>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> arch/arm/Kconfig-nommu | 10 +++++-----
> arch/arm/Kconfig.debug | 4 ++--
> arch/arm/mach-ep93xx/Kconfig | 8 ++++----
> arch/arm/mach-ixp4xx/Kconfig | 16 ++++++++--------
> arch/arm/mach-mmp/Kconfig | 2 +-
> arch/arm/mach-omap1/Kconfig | 14 +++++++-------
> arch/arm/mach-prima2/Kconfig | 6 +++---
> arch/arm/mach-s3c24xx/Kconfig | 4 ++--
> arch/arm/mach-s3c64xx/Kconfig | 6 +++---
> arch/arm/plat-samsung/Kconfig | 2 +-
> 10 files changed, 36 insertions(+), 36 deletions(-)
>
[...]
> diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
> index f2db5fd38145..bf81dfab7f1b 100644
> --- a/arch/arm/mach-ep93xx/Kconfig
> +++ b/arch/arm/mach-ep93xx/Kconfig
> @@ -126,10 +126,10 @@ config MACH_MICRO9S
> Contec Micro9-Slim board.
>
> config MACH_SIM_ONE
> - bool "Support Simplemachines Sim.One board"
> - help
> - Say 'Y' here if you want your kernel to support the
> - Simplemachines Sim.One board.
> + bool "Support Simplemachines Sim.One board"
> + help
> + Say 'Y' here if you want your kernel to support the
> + Simplemachines Sim.One board.
>
> config MACH_SNAPPER_CL15
> bool "Support Bluewater Systems Snapper CL15 Module"
--
Alexander Sverdlin.