Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
Changes since v1:
1. Fix also 7-space and tab+1 space indentation issues.
---
drivers/i2c/busses/Kconfig | 22 +++++++++++-----------
drivers/i2c/muxes/Kconfig | 18 +++++++++---------
2 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 45ca099e7315..da243f153319 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -293,7 +293,7 @@ config I2C_VIA
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the VIA
- 82C586B I2C interface
+ 82C586B I2C interface
This driver can also be built as a module. If so, the module
will be called i2c-via.
@@ -678,11 +678,11 @@ config I2C_IMX_LPI2C
tristate "IMX Low Power I2C interface"
depends on ARCH_MXC || COMPILE_TEST
help
- Say Y here if you want to use the Low Power IIC bus controller
- on the Freescale i.MX processors.
+ Say Y here if you want to use the Low Power IIC bus controller
+ on the Freescale i.MX processors.
- This driver can also be built as a module. If so, the module
- will be called i2c-imx-lpi2c.
+ This driver can also be built as a module. If so, the module
+ will be called i2c-imx-lpi2c.
config I2C_IOP3XX
tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
@@ -1184,9 +1184,9 @@ config I2C_DIOLAN_U2C
will be called i2c-diolan-u2c.
config I2C_DLN2
- tristate "Diolan DLN-2 USB I2C adapter"
- depends on MFD_DLN2
- help
+ tristate "Diolan DLN-2 USB I2C adapter"
+ depends on MFD_DLN2
+ help
If you say yes to this option, support will be included for Diolan
DLN2, a USB to I2C interface.
@@ -1285,9 +1285,9 @@ config I2C_VIPERBOARD
help
Say yes here to access the I2C part of the Nano River
Technologies Viperboard as I2C master.
- See viperboard API specification and Nano
- River Tech's viperboard.h for detailed meaning
- of the module parameters.
+ See viperboard API specification and Nano
+ River Tech's viperboard.h for detailed meaning
+ of the module parameters.
comment "Other I2C/SMBus bus drivers"
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index c6040aa839ac..1708b1a82da2 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -109,14 +109,14 @@ config I2C_DEMUX_PINCTRL
want to change the I2C master at run-time depending on features.
config I2C_MUX_MLXCPLD
- tristate "Mellanox CPLD based I2C multiplexer"
- help
- If you say yes to this option, support will be included for a
- CPLD based I2C multiplexer. This driver provides access to
- I2C busses connected through a MUX, which is controlled
- by a CPLD register.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-mux-mlxcpld.
+ tristate "Mellanox CPLD based I2C multiplexer"
+ help
+ If you say yes to this option, support will be included for a
+ CPLD based I2C multiplexer. This driver provides access to
+ I2C busses connected through a MUX, which is controlled
+ by a CPLD register.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-mlxcpld.
endmenu
--
2.7.4
On Thu, Nov 21, 2019 at 04:19:23AM +0100, Krzysztof Kozlowski wrote:
> Adjust indentation from spaces to tab (+optional two spaces) as in
> coding style with command like:
> $ sed -e 's/^ /\t/' -i */Kconfig
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>
> ---
>
> Changes since v1:
> 1. Fix also 7-space and tab+1 space indentation issues.
> ---
> drivers/i2c/busses/Kconfig | 22 +++++++++++-----------
> drivers/i2c/muxes/Kconfig | 18 +++++++++---------
Peter, I'd like to apply this for 5.5. so we don't have to deal with
whitespace conflicts during the next cycle. Are you fine with me picking
it up for muxes?
On Thu, Nov 21, 2019 at 04:19:23AM +0100, Krzysztof Kozlowski wrote:
> Adjust indentation from spaces to tab (+optional two spaces) as in
> coding style with command like:
> $ sed -e 's/^ /\t/' -i */Kconfig
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>
Applied to for-next, thanks!
> > Peter, I'd like to apply this for 5.5. so we don't have to deal with
> > whitespace conflicts during the next cycle. Are you fine with me picking
> > it up for muxes?
>
> Absolutely!
Cool, thanks!
On 2019-11-25 15:58, Wolfram Sang wrote:
> On Thu, Nov 21, 2019 at 04:19:23AM +0100, Krzysztof Kozlowski wrote:
>> Adjust indentation from spaces to tab (+optional two spaces) as in
>> coding style with command like:
>> $ sed -e 's/^ /\t/' -i */Kconfig
>>
>> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>>
>> ---
>>
>> Changes since v1:
>> 1. Fix also 7-space and tab+1 space indentation issues.
>> ---
>> drivers/i2c/busses/Kconfig | 22 +++++++++++-----------
>> drivers/i2c/muxes/Kconfig | 18 +++++++++---------
>
> Peter, I'd like to apply this for 5.5. so we don't have to deal with
> whitespace conflicts during the next cycle. Are you fine with me picking
> it up for muxes?
Absolutely!
Acked-by: Peter Rosin <[email protected]>
Cheers,
Peter