Fix the following warning:
drivers/tty/serial/amba-pl011.c: In function check_apply_cts_event_workaround:
drivers/tty/serial/amba-pl011.c:1461:15: warning: variable dummy_read set but not used [-Wunused-but-set-variable]
The data read is useless and can be dropped.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Xiongfeng Wang <[email protected]>
---
drivers/tty/serial/amba-pl011.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 4b28134..c5e9475 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1452,8 +1452,6 @@ static void pl011_modem_status(struct uart_amba_port *uap)
static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
{
- unsigned int dummy_read;
-
if (!uap->vendor->cts_event_workaround)
return;
@@ -1465,8 +1463,8 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
* single apb access will incur 2 pclk(133.12Mhz) delay,
* so add 2 dummy reads
*/
- dummy_read = pl011_read(uap, REG_ICR);
- dummy_read = pl011_read(uap, REG_ICR);
+ pl011_read(uap, REG_ICR);
+ pl011_read(uap, REG_ICR);
}
static irqreturn_t pl011_int(int irq, void *dev_id)
--
1.7.12.4