- Add ctl_dev field to "struct e752x_dev_info". Then we can eliminate
ugly switch statement from e752x_probe1().
- Remove code from e752x_probe1() that clears initial PCI bus parity
errors. The core EDAC module already does this.
Signed-Off-By: David S. Peterson <[email protected]> <[email protected]>
---
Index: linux-2.6.16-rc5-edac/drivers/edac/e752x_edac.c
===================================================================
--- linux-2.6.16-rc5-edac.orig/drivers/edac/e752x_edac.c 2006-02-27 16:58:41.000000000 -0800
+++ linux-2.6.16-rc5-edac/drivers/edac/e752x_edac.c 2006-02-27 17:03:40.000000000 -0800
@@ -181,6 +181,7 @@ struct e752x_pvt {
struct e752x_dev_info {
u16 err_dev;
+ u16 ctl_dev;
const char *ctl_name;
};
@@ -207,12 +208,15 @@ struct e752x_error_info {
static const struct e752x_dev_info e752x_devs[] = {
[E7520] = {
.err_dev = PCI_DEVICE_ID_INTEL_7520_1_ERR,
+ .ctl_dev = PCI_DEVICE_ID_INTEL_7520_0,
.ctl_name = "E7520"},
[E7525] = {
.err_dev = PCI_DEVICE_ID_INTEL_7525_1_ERR,
+ .ctl_dev = PCI_DEVICE_ID_INTEL_7525_0,
.ctl_name = "E7525"},
[E7320] = {
.err_dev = PCI_DEVICE_ID_INTEL_7320_1_ERR,
+ .ctl_dev = PCI_DEVICE_ID_INTEL_7320_0,
.ctl_name = "E7320"},
};
@@ -742,7 +746,7 @@ static int e752x_probe1(struct pci_dev *
{
int rc = -ENODEV;
int index;
- u16 pci_data, stat;
+ u16 pci_data;
u32 stat32;
u16 stat16;
u8 stat8;
@@ -755,7 +759,6 @@ static int e752x_probe1(struct pci_dev *
int drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
u32 dra;
unsigned long last_cumul_size;
- struct pci_dev *pres_dev;
struct pci_dev *dev = NULL;
debugf0("%s(): mci\n", __func__);
@@ -920,33 +923,9 @@ static int e752x_probe1(struct pci_dev *
goto fail;
}
- /* Walk through the PCI table and clear errors */
- switch (dev_idx) {
- case E7520:
- dev = pci_get_device(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_7520_0, NULL);
- break;
- case E7525:
- dev = pci_get_device(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_7525_0, NULL);
- break;
- case E7320:
- dev = pci_get_device(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_7320_0, NULL);
- break;
- }
-
-
+ dev = pci_get_device(PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].ctl_dev,
+ NULL);
pvt->dev_d0f0 = dev;
- for (pres_dev = dev;
- ((struct pci_dev *) pres_dev->global_list.next != dev);
- pres_dev = (struct pci_dev *) pres_dev->global_list.next) {
- pci_read_config_dword(pres_dev, PCI_COMMAND, &stat32);
- stat = (u16) (stat32 >> 16);
- /* clear any error bits */
- if (stat32 & ((1 << 6) + (1 << 8)))
- pci_write_config_word(pres_dev, PCI_STATUS, stat);
- }
/* find the error reporting device and clear errors */
dev = pvt->dev_d0f1 = pci_dev_get(pvt->bridge_ck);
/* Turn off error disable & SMI in case the BIOS turned it on */