A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: video-codec@ff350000:
interrupts: [[0, 9, 4]] is too short
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: video-codec@ff350000:
interrupt-names: ['vdpu'] is too short
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: video-codec@ff350000:
interrupt-names:0: 'vepu' was expected
With the conversion of rockchip-vpu.txt to yaml the correct
'interrupt-names' for rk3328 was not included, so add them now.
Also add 'minItems' to 'interrupts'for the completeness.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-vpu.yaml
Signed-off-by: Johan Jonker <[email protected]>
---
Documentation/devicetree/bindings/media/rockchip-vpu.yaml | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
index d7a42e6f9..27df18ad6 100644
--- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
@@ -24,12 +24,15 @@ properties:
maxItems: 1
interrupts:
+ minItems: 1
maxItems: 2
interrupt-names:
- items:
- - const: vepu
+ oneOf:
- const: vdpu
+ - items:
+ - const: vepu
+ - const: vdpu
clocks:
maxItems: 2
--
2.11.0