The word 'descriptor' is misspelled throughout the tree.
Fix it up accordingly:
decriptors -> descriptors
Signed-off-by: Kieran Bingham <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
---
mm/balloon_compaction.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/mm/balloon_compaction.c b/mm/balloon_compaction.c
index 26de020aae7b..907fefde2572 100644
--- a/mm/balloon_compaction.c
+++ b/mm/balloon_compaction.c
@@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(balloon_page_list_enqueue);
/**
* balloon_page_list_dequeue() - removes pages from balloon's page list and
* returns a list of the pages.
- * @b_dev_info: balloon device decriptor where we will grab a page from.
+ * @b_dev_info: balloon device descriptor where we will grab a page from.
* @pages: pointer to the list of pages that would be returned to the caller.
* @n_req_pages: number of requested pages.
*
@@ -157,7 +157,7 @@ EXPORT_SYMBOL_GPL(balloon_page_enqueue);
/*
* balloon_page_dequeue - removes a page from balloon's page list and returns
* its address to allow the driver to release the page.
- * @b_dev_info: balloon device decriptor where we will grab a page from.
+ * @b_dev_info: balloon device descriptor where we will grab a page from.
*
* Driver must call this function to properly dequeue a previously enqueued page
* before definitively releasing it back to the guest system.
--
2.25.1
On Tue, Jun 9, 2020 at 8:04 PM Kieran Bingham
<[email protected]> wrote:
>
> The word 'descriptor' is misspelled throughout the tree.
I think, *throughout the tree* is not appropriate* here. This patch
has fixed it within the file. With that,
Acked-by: Souptick Joarder <[email protected]>
>
> Fix it up accordingly:
> decriptors -> descriptors
>
> Signed-off-by: Kieran Bingham <[email protected]>
> Reviewed-by: David Hildenbrand <[email protected]>
> ---
> mm/balloon_compaction.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/mm/balloon_compaction.c b/mm/balloon_compaction.c
> index 26de020aae7b..907fefde2572 100644
> --- a/mm/balloon_compaction.c
> +++ b/mm/balloon_compaction.c
> @@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(balloon_page_list_enqueue);
> /**
> * balloon_page_list_dequeue() - removes pages from balloon's page list and
> * returns a list of the pages.
> - * @b_dev_info: balloon device decriptor where we will grab a page from.
> + * @b_dev_info: balloon device descriptor where we will grab a page from.
> * @pages: pointer to the list of pages that would be returned to the caller.
> * @n_req_pages: number of requested pages.
> *
> @@ -157,7 +157,7 @@ EXPORT_SYMBOL_GPL(balloon_page_enqueue);
> /*
> * balloon_page_dequeue - removes a page from balloon's page list and returns
> * its address to allow the driver to release the page.
> - * @b_dev_info: balloon device decriptor where we will grab a page from.
> + * @b_dev_info: balloon device descriptor where we will grab a page from.
> *
> * Driver must call this function to properly dequeue a previously enqueued page
> * before definitively releasing it back to the guest system.
> --
> 2.25.1
>
>
On Tue, Jun 09, 2020 at 03:34:12PM +0100, Kieran Bingham wrote:
> The word 'descriptor' is misspelled throughout the tree.
>
> Fix it up accordingly:
> decriptors -> descriptors
>
> Signed-off-by: Kieran Bingham <[email protected]>
> Reviewed-by: David Hildenbrand <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Trivial tree pls.
> ---
> mm/balloon_compaction.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/mm/balloon_compaction.c b/mm/balloon_compaction.c
> index 26de020aae7b..907fefde2572 100644
> --- a/mm/balloon_compaction.c
> +++ b/mm/balloon_compaction.c
> @@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(balloon_page_list_enqueue);
> /**
> * balloon_page_list_dequeue() - removes pages from balloon's page list and
> * returns a list of the pages.
> - * @b_dev_info: balloon device decriptor where we will grab a page from.
> + * @b_dev_info: balloon device descriptor where we will grab a page from.
> * @pages: pointer to the list of pages that would be returned to the caller.
> * @n_req_pages: number of requested pages.
> *
> @@ -157,7 +157,7 @@ EXPORT_SYMBOL_GPL(balloon_page_enqueue);
> /*
> * balloon_page_dequeue - removes a page from balloon's page list and returns
> * its address to allow the driver to release the page.
> - * @b_dev_info: balloon device decriptor where we will grab a page from.
> + * @b_dev_info: balloon device descriptor where we will grab a page from.
> *
> * Driver must call this function to properly dequeue a previously enqueued page
> * before definitively releasing it back to the guest system.
> --
> 2.25.1
On Tue, Jun 9, 2020 at 10:02 PM Souptick Joarder <[email protected]> wrote:
>
> On Tue, Jun 9, 2020 at 8:04 PM Kieran Bingham
> <[email protected]> wrote:
> >
> > The word 'descriptor' is misspelled throughout the tree.
>
> I think, *throughout the tree* is not appropriate* here. This patch
> has fixed it within the file. With that,
Sorry, I read the mail thread in a wrong way. You are right.
>
> Acked-by: Souptick Joarder <[email protected]>
>
> >
> > Fix it up accordingly:
> > decriptors -> descriptors
> >
> > Signed-off-by: Kieran Bingham <[email protected]>
> > Reviewed-by: David Hildenbrand <[email protected]>
> > ---
> > mm/balloon_compaction.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/mm/balloon_compaction.c b/mm/balloon_compaction.c
> > index 26de020aae7b..907fefde2572 100644
> > --- a/mm/balloon_compaction.c
> > +++ b/mm/balloon_compaction.c
> > @@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(balloon_page_list_enqueue);
> > /**
> > * balloon_page_list_dequeue() - removes pages from balloon's page list and
> > * returns a list of the pages.
> > - * @b_dev_info: balloon device decriptor where we will grab a page from.
> > + * @b_dev_info: balloon device descriptor where we will grab a page from.
> > * @pages: pointer to the list of pages that would be returned to the caller.
> > * @n_req_pages: number of requested pages.
> > *
> > @@ -157,7 +157,7 @@ EXPORT_SYMBOL_GPL(balloon_page_enqueue);
> > /*
> > * balloon_page_dequeue - removes a page from balloon's page list and returns
> > * its address to allow the driver to release the page.
> > - * @b_dev_info: balloon device decriptor where we will grab a page from.
> > + * @b_dev_info: balloon device descriptor where we will grab a page from.
> > *
> > * Driver must call this function to properly dequeue a previously enqueued page
> > * before definitively releasing it back to the guest system.
> > --
> > 2.25.1
> >
> >
Hello!
On 09.06.2020 17:34, Kieran Bingham wrote:
> The word 'descriptor' is misspelled throughout the tree.
>
> Fix it up accordingly:
> decriptors -> descriptors
decriptor -> descriptor really. ;-)
> Signed-off-by: Kieran Bingham <[email protected]>
> Reviewed-by: David Hildenbrand <[email protected]>
> ---
> mm/balloon_compaction.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/mm/balloon_compaction.c b/mm/balloon_compaction.c
> index 26de020aae7b..907fefde2572 100644
> --- a/mm/balloon_compaction.c
> +++ b/mm/balloon_compaction.c
> @@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(balloon_page_list_enqueue);
> /**
> * balloon_page_list_dequeue() - removes pages from balloon's page list and
> * returns a list of the pages.
> - * @b_dev_info: balloon device decriptor where we will grab a page from.
> + * @b_dev_info: balloon device descriptor where we will grab a page from.
> * @pages: pointer to the list of pages that would be returned to the caller.
> * @n_req_pages: number of requested pages.
> *
> @@ -157,7 +157,7 @@ EXPORT_SYMBOL_GPL(balloon_page_enqueue);
> /*
> * balloon_page_dequeue - removes a page from balloon's page list and returns
> * its address to allow the driver to release the page.
> - * @b_dev_info: balloon device decriptor where we will grab a page from.
> + * @b_dev_info: balloon device descriptor where we will grab a page from.
> *
> * Driver must call this function to properly dequeue a previously enqueued page
> * before definitively releasing it back to the guest system.
MBR, Sergei
Hi Sergei,
On 10/06/2020 10:00, Sergei Shtylyov wrote:
> Hello!
>
> On 09.06.2020 17:34, Kieran Bingham wrote:
>
>> The word 'descriptor' is misspelled throughout the tree.
>>
>> Fix it up accordingly:
>> decriptors -> descriptors
>
> decriptor -> descriptor really. ;-)
Ayeee ... that's what I get for doing a batch fixup ...
Which - I believe I probably actually did a sed conversion on decriptor,
anyway, so I'm not even sure why the commit messages ended up all
pluralised ;-)
Thanks for the highlight, I'll fix up in any resends.
--
Kieran
>> Signed-off-by: Kieran Bingham <[email protected]>
>> Reviewed-by: David Hildenbrand <[email protected]>
>> ---
>> mm/balloon_compaction.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/mm/balloon_compaction.c b/mm/balloon_compaction.c
>> index 26de020aae7b..907fefde2572 100644
>> --- a/mm/balloon_compaction.c
>> +++ b/mm/balloon_compaction.c
>> @@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(balloon_page_list_enqueue);
>> /**
>> * balloon_page_list_dequeue() - removes pages from balloon's page
>> list and
>> * returns a list of the pages.
>> - * @b_dev_info: balloon device decriptor where we will grab a page from.
>> + * @b_dev_info: balloon device descriptor where we will grab a page
>> from.
>> * @pages: pointer to the list of pages that would be returned to
>> the caller.
>> * @n_req_pages: number of requested pages.
>> *
>> @@ -157,7 +157,7 @@ EXPORT_SYMBOL_GPL(balloon_page_enqueue);
>> /*
>> * balloon_page_dequeue - removes a page from balloon's page list
>> and returns
>> * its address to allow the driver to release the page.
>> - * @b_dev_info: balloon device decriptor where we will grab a page from.
>> + * @b_dev_info: balloon device descriptor where we will grab a page
>> from.
>> *
>> * Driver must call this function to properly dequeue a previously
>> enqueued page
>> * before definitively releasing it back to the guest system.
>
> MBR, Sergei