This patch does some cleanup to the m41t00 i2c/rtc driver including:
- use BCD2BIN/BIN2BCD instead of BCD_TO_BIN/BIN_TO_BCD
- use strlcpy instead of strncpy
- some whitespace cleanup
Signed-off-by: Mark A. Greer <[email protected]>
---
m41t00.c | 52 +++++++++++++++++++++++-----------------------------
1 files changed, 23 insertions(+), 29 deletions(-)
---
diff -Nurp linux-2.6.16-mm1-wq/drivers/i2c/chips/m41t00.c linux-2.6.16-mm1-cleanup/drivers/i2c/chips/m41t00.c
--- linux-2.6.16-mm1-wq/drivers/i2c/chips/m41t00.c 2006-03-23 16:04:01.000000000 -0700
+++ linux-2.6.16-mm1-cleanup/drivers/i2c/chips/m41t00.c 2006-03-23 16:16:35.000000000 -0700
@@ -1,6 +1,4 @@
/*
- * drivers/i2c/chips/m41t00.c
- *
* I2C client/driver for the ST M41T00 Real-Time Clock chip.
*
* Author: Mark A. Greer <[email protected]>
@@ -13,9 +11,6 @@
/*
* This i2c client/driver wedges between the drivers/char/genrtc.c RTC
* interface and the SMBus interface of the i2c subsystem.
- * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
- * recommened in .../Documentation/i2c/writing-clients section
- * "Sending and receiving", using SMBus level communication is preferred.
*/
#include <linux/kernel.h>
@@ -42,17 +37,17 @@ static unsigned short ignore[] = { I2C_C
static unsigned short normal_addr[] = { 0x68, I2C_CLIENT_END };
static struct i2c_client_address_data addr_data = {
- .normal_i2c = normal_addr,
- .probe = ignore,
- .ignore = ignore,
+ .normal_i2c = normal_addr,
+ .probe = ignore,
+ .ignore = ignore,
};
ulong
m41t00_get_rtc_time(void)
{
- s32 sec, min, hour, day, mon, year;
- s32 sec1, min1, hour1, day1, mon1, year1;
- ulong limit = 10;
+ s32 sec, min, hour, day, mon, year;
+ s32 sec1, min1, hour1, day1, mon1, year1;
+ ulong limit = 10;
sec = min = hour = day = mon = year = 0;
sec1 = min1 = hour1 = day1 = mon1 = year1 = 0;
@@ -98,12 +93,12 @@ m41t00_get_rtc_time(void)
mon &= 0x1f;
year &= 0xff;
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
+ sec = BCD2BIN(sec);
+ min = BCD2BIN(min);
+ hour = BCD2BIN(hour);
+ day = BCD2BIN(day);
+ mon = BCD2BIN(mon);
+ year = BCD2BIN(year);
year += 1900;
if (year < 1970)
@@ -116,17 +111,17 @@ static void
m41t00_set(void *arg)
{
struct rtc_time tm;
- ulong nowtime = *(ulong *)arg;
+ ulong nowtime = *(ulong *)arg;
to_tm(nowtime, &tm);
tm.tm_year = (tm.tm_year - 1900) % 100;
- BIN_TO_BCD(tm.tm_sec);
- BIN_TO_BCD(tm.tm_min);
- BIN_TO_BCD(tm.tm_hour);
- BIN_TO_BCD(tm.tm_mon);
- BIN_TO_BCD(tm.tm_mday);
- BIN_TO_BCD(tm.tm_year);
+ tm.tm_sec = BIN2BCD(tm.tm_sec);
+ tm.tm_min = BIN2BCD(tm.tm_min);
+ tm.tm_hour = BIN2BCD(tm.tm_hour);
+ tm.tm_mon = BIN2BCD(tm.tm_mon);
+ tm.tm_mday = BIN2BCD(tm.tm_mday);
+ tm.tm_year = BIN2BCD(tm.tm_year);
mutex_lock(&m41t00_mutex);
if ((i2c_smbus_write_byte_data(save_client, 0, tm.tm_sec & 0x7f) < 0)
@@ -144,10 +139,9 @@ m41t00_set(void *arg)
dev_warn(&save_client->dev,"m41t00: can't write to rtc chip\n");
mutex_unlock(&m41t00_mutex);
- return;
}
-static ulong new_time;
+static ulong new_time;
int
m41t00_set_rtc_time(ulong nowtime)
@@ -179,7 +173,7 @@ m41t00_probe(struct i2c_adapter *adap, i
if (!client)
return -ENOMEM;
- strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE);
+ strlcpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE);
client->addr = addr;
client->adapter = adap;
client->driver = &m41t00_driver;
@@ -203,7 +197,7 @@ m41t00_attach(struct i2c_adapter *adap)
static int
m41t00_detach(struct i2c_client *client)
{
- int rc;
+ int rc;
if ((rc = i2c_detach_client(client)) == 0) {
kfree(client);
@@ -214,6 +208,7 @@ m41t00_detach(struct i2c_client *client)
static struct i2c_driver m41t00_driver = {
.driver = {
+ .owner = THIS_MODULE,
.name = M41T00_DRV_NAME,
},
.id = I2C_DRIVERID_STM41T00,
@@ -231,7 +226,6 @@ static void __exit
m41t00_exit(void)
{
i2c_del_driver(&m41t00_driver);
- return;
}
module_init(m41t00_init);
Hi Mark,
> This patch does some cleanup to the m41t00 i2c/rtc driver including:
> - use BCD2BIN/BIN2BCD instead of BCD_TO_BIN/BIN_TO_BCD
> - use strlcpy instead of strncpy
> - some whitespace cleanup
Looks overall good, except:
> @@ -214,6 +208,7 @@ m41t00_detach(struct i2c_client *client)
>
> static struct i2c_driver m41t00_driver = {
> .driver = {
> + .owner = THIS_MODULE,
> .name = M41T00_DRV_NAME,
> },
> .id = I2C_DRIVERID_STM41T00,
i2c_add_driver sets the owner for you, so it was omitted here on
purpose.
I'll drop that change before pushing the patch to Greg, no need to
resend.
Thanks,
--
Jean Delvare
On Mon, Mar 27, 2006 at 07:11:11PM +0200, Jean Delvare wrote:
> Hi Mark,
>
> > This patch does some cleanup to the m41t00 i2c/rtc driver including:
> > - use BCD2BIN/BIN2BCD instead of BCD_TO_BIN/BIN_TO_BCD
> > - use strlcpy instead of strncpy
> > - some whitespace cleanup
>
> Looks overall good, except:
>
> > @@ -214,6 +208,7 @@ m41t00_detach(struct i2c_client *client)
> >
> > static struct i2c_driver m41t00_driver = {
> > .driver = {
> > + .owner = THIS_MODULE,
> > .name = M41T00_DRV_NAME,
> > },
> > .id = I2C_DRIVERID_STM41T00,
>
> i2c_add_driver sets the owner for you, so it was omitted here on
> purpose.
>
> I'll drop that change before pushing the patch to Greg, no need to
> resend.
Hang on for a bit, Jean. I'm making a new set of patches with yours and
Andrew's comments addressed. Will be out shortly.
Mark
Resend...
---
This patch does some cleanup to the m41t00 i2c/rtc driver including:
- use BCD2BIN/BIN2BCD instead of BCD_TO_BIN/BIN_TO_BCD
- use strlcpy instead of strncpy
- some whitespace cleanup
Signed-off-by: Mark A. Greer <[email protected]>
---
m41t00.c | 49 +++++++++++++++++++++----------------------------
1 files changed, 21 insertions(+), 28 deletions(-)
---
diff -Nurp linux-2.6.16-mm1-wq/drivers/i2c/chips/m41t00.c linux-2.6.16-mm1-cleanup/drivers/i2c/chips/m41t00.c
--- linux-2.6.16-mm1-wq/drivers/i2c/chips/m41t00.c 2006-03-27 15:29:35.000000000 -0700
+++ linux-2.6.16-mm1-cleanup/drivers/i2c/chips/m41t00.c 2006-03-27 16:00:35.000000000 -0700
@@ -1,6 +1,4 @@
/*
- * drivers/i2c/chips/m41t00.c
- *
* I2C client/driver for the ST M41T00 Real-Time Clock chip.
*
* Author: Mark A. Greer <[email protected]>
@@ -13,9 +11,6 @@
/*
* This i2c client/driver wedges between the drivers/char/genrtc.c RTC
* interface and the SMBus interface of the i2c subsystem.
- * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
- * recommened in .../Documentation/i2c/writing-clients section
- * "Sending and receiving", using SMBus level communication is preferred.
*/
#include <linux/kernel.h>
@@ -41,17 +36,17 @@ static unsigned short ignore[] = { I2C_C
static unsigned short normal_addr[] = { 0x68, I2C_CLIENT_END };
static struct i2c_client_address_data addr_data = {
- .normal_i2c = normal_addr,
- .probe = ignore,
- .ignore = ignore,
+ .normal_i2c = normal_addr,
+ .probe = ignore,
+ .ignore = ignore,
};
ulong
m41t00_get_rtc_time(void)
{
- s32 sec, min, hour, day, mon, year;
- s32 sec1, min1, hour1, day1, mon1, year1;
- ulong limit = 10;
+ s32 sec, min, hour, day, mon, year;
+ s32 sec1, min1, hour1, day1, mon1, year1;
+ ulong limit = 10;
sec = min = hour = day = mon = year = 0;
sec1 = min1 = hour1 = day1 = mon1 = year1 = 0;
@@ -97,12 +92,12 @@ m41t00_get_rtc_time(void)
mon &= 0x1f;
year &= 0xff;
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
+ sec = BCD2BIN(sec);
+ min = BCD2BIN(min);
+ hour = BCD2BIN(hour);
+ day = BCD2BIN(day);
+ mon = BCD2BIN(mon);
+ year = BCD2BIN(year);
year += 1900;
if (year < 1970)
@@ -115,17 +110,17 @@ static void
m41t00_set(void *arg)
{
struct rtc_time tm;
- ulong nowtime = *(ulong *)arg;
+ ulong nowtime = *(ulong *)arg;
to_tm(nowtime, &tm);
tm.tm_year = (tm.tm_year - 1900) % 100;
- BIN_TO_BCD(tm.tm_sec);
- BIN_TO_BCD(tm.tm_min);
- BIN_TO_BCD(tm.tm_hour);
- BIN_TO_BCD(tm.tm_mon);
- BIN_TO_BCD(tm.tm_mday);
- BIN_TO_BCD(tm.tm_year);
+ tm.tm_sec = BIN2BCD(tm.tm_sec);
+ tm.tm_min = BIN2BCD(tm.tm_min);
+ tm.tm_hour = BIN2BCD(tm.tm_hour);
+ tm.tm_mon = BIN2BCD(tm.tm_mon);
+ tm.tm_mday = BIN2BCD(tm.tm_mday);
+ tm.tm_year = BIN2BCD(tm.tm_year);
mutex_lock(&m41t00_mutex);
if ((i2c_smbus_write_byte_data(save_client, 0, tm.tm_sec & 0x7f) < 0)
@@ -143,7 +138,6 @@ m41t00_set(void *arg)
dev_warn(&save_client->dev,"m41t00: can't write to rtc chip\n");
mutex_unlock(&m41t00_mutex);
- return;
}
static ulong new_time;
@@ -180,7 +174,7 @@ m41t00_probe(struct i2c_adapter *adap, i
if (!client)
return -ENOMEM;
- strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE);
+ strlcpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE);
client->addr = addr;
client->adapter = adap;
client->driver = &m41t00_driver;
@@ -204,7 +198,7 @@ m41t00_attach(struct i2c_adapter *adap)
static int
m41t00_detach(struct i2c_client *client)
{
- int rc;
+ int rc;
if ((rc = i2c_detach_client(client)) == 0) {
kfree(client);
@@ -232,7 +226,6 @@ static void __exit
m41t00_exit(void)
{
i2c_del_driver(&m41t00_driver);
- return;
}
module_init(m41t00_init);