2020-07-05 01:41:49

by Chris Healy

Subject: [PATCH] ARM: dts: vfxxx: Add node for CAAM

Add node for CAAM device in NXP Vybrid SoC.

Signed-off-by: Andrey Smirnov <[email protected]>
Signed-off-by: Chris Healy <[email protected]>
---
arch/arm/boot/dts/vfxxx.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 2d547e7b21ad..0fe03aa0367f 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -729,6 +729,28 @@
dma-names = "rx","tx";
status = "disabled";
};
+
+ crypto: crypto@400f0000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x400f0000 0x9000>;
+ ranges = <0 0x400f0000 0x9000>;
+ clocks = <&clks VF610_CLK_CAAM>;
+ clock-names = "ipg";
+
+ sec_jr0: jr0@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr1@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
};
};
};
--
2.21.3

2020-07-13 06:33:59

by Shawn Guo

Subject: Re: [PATCH] ARM: dts: vfxxx: Add node for CAAM

On Sat, Jul 04, 2020 at 06:40:43PM -0700, Chris Healy wrote:
> Add node for CAAM device in NXP Vybrid SoC.
>
> Signed-off-by: Andrey Smirnov <[email protected]>
> Signed-off-by: Chris Healy <[email protected]>
> ---
> arch/arm/boot/dts/vfxxx.dtsi | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
> index 2d547e7b21ad..0fe03aa0367f 100644
> --- a/arch/arm/boot/dts/vfxxx.dtsi
> +++ b/arch/arm/boot/dts/vfxxx.dtsi
> @@ -729,6 +729,28 @@
> dma-names = "rx","tx";
> status = "disabled";
> };
> +
> + crypto: crypto@400f0000 {
> + compatible = "fsl,sec-v4.0";

Please use tab for indentation.

Shawn

> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x400f0000 0x9000>;
> + ranges = <0 0x400f0000 0x9000>;
> + clocks = <&clks VF610_CLK_CAAM>;
> + clock-names = "ipg";
> +
> + sec_jr0: jr0@1000 {
> + compatible = "fsl,sec-v4.0-job-ring";
> + reg = <0x1000 0x1000>;
> + interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sec_jr1: jr1@2000 {
> + compatible = "fsl,sec-v4.0-job-ring";
> + reg = <0x2000 0x1000>;
> + interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> };
> };
> };
> --
> 2.21.3