v2: https://lkml.org/lkml/2020/7/10/28
Changelog v2-->v3:
1. Based on comments from Nicholas Piggin, introducing a cleanup patch
in which, instead of checking for CPU_FTR_ARCH_300 check for
PVR_POWER9 to allow for a finer granularity of checks where one
processor generation can have multiple ways to handling idle
2. Removed saving-restoring DAWR, DAWRX patch for P10 systems. Based on
discussions it has become evident that checks based on PVR is the way
to go; however, P10 PVR is yet to up-stream hence shelving this patch
for later.
Pratik Rajesh Sampat (3):
powerpc/powernv/idle: Replace CPU features checks with PVR checks
powerpc/powernv/idle: Rename pnv_first_spr_loss_level variable
powerpc/powernv/idle: Exclude mfspr on HID1,4,5 on P9 and above
arch/powerpc/platforms/powernv/idle.c | 38 +++++++++++++--------------
1 file changed, 19 insertions(+), 19 deletions(-)
--
2.25.4
POWER9 onwards the support for the registers HID1, HID4, HID5 has been
receded.
Although mfspr on the above registers worked in Power9, In Power10
simulator is unrecognized. Moving their assignment under the
check for machines lower than Power9
Signed-off-by: Pratik Rajesh Sampat <[email protected]>
Reviewed-by: Gautham R. Shenoy <[email protected]>
---
arch/powerpc/platforms/powernv/idle.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index d439e11af101..d24d6671f3e8 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -73,9 +73,6 @@ static int pnv_save_sprs_for_deep_states(void)
*/
uint64_t lpcr_val = mfspr(SPRN_LPCR);
uint64_t hid0_val = mfspr(SPRN_HID0);
- uint64_t hid1_val = mfspr(SPRN_HID1);
- uint64_t hid4_val = mfspr(SPRN_HID4);
- uint64_t hid5_val = mfspr(SPRN_HID5);
uint64_t hmeer_val = mfspr(SPRN_HMEER);
uint64_t msr_val = MSR_IDLE;
uint64_t psscr_val = pnv_deepest_stop_psscr_val;
@@ -117,6 +114,9 @@ static int pnv_save_sprs_for_deep_states(void)
/* Only p8 needs to set extra HID regiters */
if (!pvr_version_is(PVR_POWER9)) {
+ uint64_t hid1_val = mfspr(SPRN_HID1);
+ uint64_t hid4_val = mfspr(SPRN_HID4);
+ uint64_t hid5_val = mfspr(SPRN_HID5);
rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
if (rc != 0)
--
2.25.4
Excerpts from Pratik Rajesh Sampat's message of July 18, 2020 4:53 am:
> POWER9 onwards the support for the registers HID1, HID4, HID5 has been
> receded.
> Although mfspr on the above registers worked in Power9, In Power10
> simulator is unrecognized. Moving their assignment under the
> check for machines lower than Power9
>
> Signed-off-by: Pratik Rajesh Sampat <[email protected]>
> Reviewed-by: Gautham R. Shenoy <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
> ---
> arch/powerpc/platforms/powernv/idle.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
> index d439e11af101..d24d6671f3e8 100644
> --- a/arch/powerpc/platforms/powernv/idle.c
> +++ b/arch/powerpc/platforms/powernv/idle.c
> @@ -73,9 +73,6 @@ static int pnv_save_sprs_for_deep_states(void)
> */
> uint64_t lpcr_val = mfspr(SPRN_LPCR);
> uint64_t hid0_val = mfspr(SPRN_HID0);
> - uint64_t hid1_val = mfspr(SPRN_HID1);
> - uint64_t hid4_val = mfspr(SPRN_HID4);
> - uint64_t hid5_val = mfspr(SPRN_HID5);
> uint64_t hmeer_val = mfspr(SPRN_HMEER);
> uint64_t msr_val = MSR_IDLE;
> uint64_t psscr_val = pnv_deepest_stop_psscr_val;
> @@ -117,6 +114,9 @@ static int pnv_save_sprs_for_deep_states(void)
>
> /* Only p8 needs to set extra HID regiters */
> if (!pvr_version_is(PVR_POWER9)) {
> + uint64_t hid1_val = mfspr(SPRN_HID1);
> + uint64_t hid4_val = mfspr(SPRN_HID4);
> + uint64_t hid5_val = mfspr(SPRN_HID5);
>
> rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
> if (rc != 0)
> --
> 2.25.4
>
>