2020-08-09 04:39:27

by Feng Zhou

Subject: [PATCH] x86/MCE/AMD, EDAC/mce_amd

From: zhoufeng <[email protected]>

The edac_mce_amd module calls decode_dram_ecc() on AMD Family17h and
later systems. This function is used in amd64_edac_mod to do
system-specific decoding for DRAM ECC errors. The function takes a
"NodeId" as a parameter.

In AMD documentation, NodeId is used to identify a physical die in a
system. This can be used to identify a node in the AMD_NB code and also
it is used with umc_normaddr_to_sysaddr().

However, the input used for decode_dram_ecc() is currently the NUMA node
of a logical CPU. so this will cause the address translation function to
fail or report incorrect results.

Signed-off-by: zhoufeng <[email protected]>
---
drivers/edac/mce_amd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
index 325aedf46ff2..73c805113322 100644
--- a/drivers/edac/mce_amd.c
+++ b/drivers/edac/mce_amd.c
@@ -996,7 +996,7 @@ static void decode_smca_error(struct mce *m)
}

if (bank_type == SMCA_UMC && xec == 0 && decode_dram_ecc)
- decode_dram_ecc(cpu_to_node(m->extcpu), m);
+ decode_dram_ecc(topology_physical_package_id(m->extcpu), m);
}

static inline void amd_decode_err_code(u16 ec)
--
2.20.1

2020-08-10 19:30:16

by Yazen Ghannam

Subject: Re: [PATCH] x86/MCE/AMD, EDAC/mce_amd

On Sun, Aug 09, 2020 at 12:35:59PM +0800, Feng zhou wrote:
> From: zhoufeng <[email protected]>
>
> The edac_mce_amd module calls decode_dram_ecc() on AMD Family17h and
> later systems. This function is used in amd64_edac_mod to do
> system-specific decoding for DRAM ECC errors. The function takes a
> "NodeId" as a parameter.
>
> In AMD documentation, NodeId is used to identify a physical die in a
> system. This can be used to identify a node in the AMD_NB code and also
> it is used with umc_normaddr_to_sysaddr().
>
> However, the input used for decode_dram_ecc() is currently the NUMA node
> of a logical CPU. so this will cause the address translation function to
> fail or report incorrect results.
>
> Signed-off-by: zhoufeng <[email protected]>
> ---
> drivers/edac/mce_amd.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
> index 325aedf46ff2..73c805113322 100644
> --- a/drivers/edac/mce_amd.c
> +++ b/drivers/edac/mce_amd.c
> @@ -996,7 +996,7 @@ static void decode_smca_error(struct mce *m)
> }
>
> if (bank_type == SMCA_UMC && xec == 0 && decode_dram_ecc)
> - decode_dram_ecc(cpu_to_node(m->extcpu), m);
> + decode_dram_ecc(topology_physical_package_id(m->extcpu), m);

This will break on Naples systems, because the NodeId and the physical
package ID will not match.

I can send a patch soon that will work for Naples, Rome, and later
systems.

Thanks,
Yazen

2020-08-12 04:11:58

by Feng Zhou

Subject: Re: [External] Re: [PATCH] x86/MCE/AMD, EDAC/mce_amd

Ok, as more AMD servers are used in bytedance, we hope to issue a patch
to the community as soon as possible. Thank you very much.

?? 2020/8/11 ????3:10, Yazen Ghannam д??:
> On Sun, Aug 09, 2020 at 12:35:59PM +0800, Feng zhou wrote:
>> From: zhoufeng <[email protected]>
>>
>> The edac_mce_amd module calls decode_dram_ecc() on AMD Family17h and
>> later systems. This function is used in amd64_edac_mod to do
>> system-specific decoding for DRAM ECC errors. The function takes a
>> "NodeId" as a parameter.
>>
>> In AMD documentation, NodeId is used to identify a physical die in a
>> system. This can be used to identify a node in the AMD_NB code and also
>> it is used with umc_normaddr_to_sysaddr().
>>
>> However, the input used for decode_dram_ecc() is currently the NUMA node
>> of a logical CPU. so this will cause the address translation function to
>> fail or report incorrect results.
>>
>> Signed-off-by: zhoufeng <[email protected]>
>> ---
>> drivers/edac/mce_amd.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
>> index 325aedf46ff2..73c805113322 100644
>> --- a/drivers/edac/mce_amd.c
>> +++ b/drivers/edac/mce_amd.c
>> @@ -996,7 +996,7 @@ static void decode_smca_error(struct mce *m)
>> }
>>
>> if (bank_type == SMCA_UMC && xec == 0 && decode_dram_ecc)
>> - decode_dram_ecc(cpu_to_node(m->extcpu), m);
>> + decode_dram_ecc(topology_physical_package_id(m->extcpu), m);
> This will break on Naples systems, because the NodeId and the physical
> package ID will not match.
>
> I can send a patch soon that will work for Naples, Rome, and later
> systems.
>
> Thanks,
> Yazen