Conversion of int-gpios into interrupts property requires also
interrupt-parent and uses different flags.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
index 630a7ee159e3..a56f602ba0a3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
@@ -113,7 +113,8 @@
extcon_usbotg1: typec@3d {
compatible = "nxp,ptn5150";
reg = <0x3d>;
- interrupts = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ptn5150>;
status = "okay";
--
2.17.1
On Thu, Sep 17, 2020 at 08:41:31PM +0200, Krzysztof Kozlowski wrote:
> Conversion of int-gpios into interrupts property requires also
> interrupt-parent and uses different flags.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
Applied, thanks.