From: Alexander Kochetkov <[email protected]>
If SPI is used for periodic polling any sensor, significant delays
sometimes appear. Switching on module clocks during resume lead to delays.
Enabling autosuspend mode causes the controller to not suspend between
SPI transfers and the delays disappear.
The commit also remove unnecessary call to pm_runtime_idle() used
to explicit put device to suspended state. Without pm_runtime_idle() PM
core will put device in the suspended state just after probe() returns.
Signed-off-by: Alexander Kochetkov <[email protected]>
---
Changes in v2:
- Extend commit description with explanation about removal
of pm_runtime_idle()
drivers/spi/spi-sun6i.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index 29ea1e87ce7e..86f29c3e335a 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -22,6 +22,8 @@
#include <linux/spi/spi.h>
+#define SUN6I_AUTOSUSPEND_TIMEOUT 2000
+
#define SUN6I_FIFO_DEPTH 128
#define SUN8I_FIFO_DEPTH 64
@@ -652,9 +654,10 @@ static int sun6i_spi_probe(struct platform_device *pdev)
goto err_free_dma_rx;
}
+ pm_runtime_set_autosuspend_delay(&pdev->dev, SUN6I_AUTOSUSPEND_TIMEOUT);
+ pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
- pm_runtime_idle(&pdev->dev);
ret = devm_spi_register_master(&pdev->dev, master);
if (ret) {
--
2.17.1
On Mon, Oct 19, 2020 at 06:03:43PM +0300, Alexander Kochetkov wrote:
> From: Alexander Kochetkov <[email protected]>
>
> If SPI is used for periodic polling any sensor, significant delays
> sometimes appear. Switching on module clocks during resume lead to delays.
> Enabling autosuspend mode causes the controller to not suspend between
> SPI transfers and the delays disappear.
>
> The commit also remove unnecessary call to pm_runtime_idle() used
> to explicit put device to suspended state. Without pm_runtime_idle() PM
> core will put device in the suspended state just after probe() returns.
>
> Signed-off-by: Alexander Kochetkov <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Thanks!
Maxime
On Mon, 19 Oct 2020 18:03:43 +0300, Alexander Kochetkov wrote:
> If SPI is used for periodic polling any sensor, significant delays
> sometimes appear. Switching on module clocks during resume lead to delays.
> Enabling autosuspend mode causes the controller to not suspend between
> SPI transfers and the delays disappear.
>
> The commit also remove unnecessary call to pm_runtime_idle() used
> to explicit put device to suspended state. Without pm_runtime_idle() PM
> core will put device in the suspended state just after probe() returns.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/1] spi: spi-sun6i: enable autosuspend feature
commit: ae0f18bef30d0e76dd62be46c59b24c75f175092
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark