It is possible to keep this compatible with both Qt4 and Qt5, but not
worth the efforts any more; it would require us to test this on both of
them, and prevent us from using new features in Qt5.
Qt5 was released in 2012, and now widely available.
Drop the Qt4 support.
Signed-off-by: Masahiro Yamada <[email protected]>
---
scripts/kconfig/qconf-cfg.sh | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/scripts/kconfig/qconf-cfg.sh b/scripts/kconfig/qconf-cfg.sh
index 02ccc0ae1031..d1eb2407c35d 100755
--- a/scripts/kconfig/qconf-cfg.sh
+++ b/scripts/kconfig/qconf-cfg.sh
@@ -2,7 +2,6 @@
# SPDX-License-Identifier: GPL-2.0
PKG="Qt5Core Qt5Gui Qt5Widgets"
-PKG2="QtCore QtGui"
if [ -z "$(command -v pkg-config)" ]; then
echo >&2 "*"
@@ -18,15 +17,8 @@ if pkg-config --exists $PKG; then
exit 0
fi
-if pkg-config --exists $PKG2; then
- echo cflags=\"$(pkg-config --cflags $PKG2)\"
- echo libs=\"$(pkg-config --libs $PKG2)\"
- echo moc=\"$(pkg-config --variable=moc_location QtCore)\"
- exit 0
-fi
-
echo >&2 "*"
-echo >&2 "* Could not find Qt via pkg-config."
-echo >&2 "* Please install either Qt 4.8 or 5.x. and make sure it's in PKG_CONFIG_PATH"
+echo >&2 "* Could not find Qt5 via pkg-config."
+echo >&2 "* Please install Qt5 and make sure it's in PKG_CONFIG_PATH"
echo >&2 "*"
exit 1
--
2.25.1
The variable, PKG, is defined at the beginning of this script.
Signed-off-by: Masahiro Yamada <[email protected]>
---
scripts/kconfig/qconf-cfg.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/kconfig/qconf-cfg.sh b/scripts/kconfig/qconf-cfg.sh
index d1eb2407c35d..fa564cd795b7 100755
--- a/scripts/kconfig/qconf-cfg.sh
+++ b/scripts/kconfig/qconf-cfg.sh
@@ -11,7 +11,7 @@ if [ -z "$(command -v pkg-config)" ]; then
fi
if pkg-config --exists $PKG; then
- echo cflags=\"-std=c++11 -fPIC $(pkg-config --cflags Qt5Core Qt5Gui Qt5Widgets)\"
+ echo cflags=\"-std=c++11 -fPIC $(pkg-config --cflags $PKG)\"
echo libs=\"$(pkg-config --libs $PKG)\"
echo moc=\"$(pkg-config --variable=host_bins Qt5Core)/moc\"
exit 0
--
2.25.1
Now that the Qt4 support was dropped, we can use the new connection
syntax supported by Qt5. It provides compile-time checking of the
validity of the connection.
Previously, the connection between signals and slots were checked
only run-time.
Commit d85de3399f97 ("kconfig: qconf: fix signal connection to invalid
slots") fixed wrong slots.
This change makes it possible to catch such mistakes easily.
Signed-off-by: Masahiro Yamada <[email protected]>
---
scripts/kconfig/qconf.cc | 136 ++++++++++++++++++++++-----------------
1 file changed, 78 insertions(+), 58 deletions(-)
diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc
index f7eb093614f2..cbe749b44b1a 100644
--- a/scripts/kconfig/qconf.cc
+++ b/scripts/kconfig/qconf.cc
@@ -310,15 +310,16 @@ ConfigList::ConfigList(QWidget *parent, const char *name)
setHeaderLabels(QStringList() << "Option" << "Name" << "Value");
- connect(this, SIGNAL(itemSelectionChanged(void)),
- SLOT(updateSelection(void)));
+ connect(this, &ConfigList::itemSelectionChanged,
+ this, &ConfigList::updateSelection);
if (name) {
configSettings->beginGroup(name);
showName = configSettings->value("/showName", false).toBool();
optMode = (enum optionMode)configSettings->value("/optionMode", 0).toInt();
configSettings->endGroup();
- connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings()));
+ connect(configApp, &QApplication::aboutToQuit,
+ this, &ConfigList::saveSettings);
}
showColumn(promptColIdx);
@@ -888,10 +889,10 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e)
headerPopup = new QMenu(this);
action = new QAction("Show Name", this);
action->setCheckable(true);
- connect(action, SIGNAL(toggled(bool)),
- SLOT(setShowName(bool)));
- connect(this, SIGNAL(showNameChanged(bool)),
- action, SLOT(setChecked(bool)));
+ connect(action, &QAction::toggled,
+ this, &ConfigList::setShowName);
+ connect(this, &ConfigList::showNameChanged,
+ action, &QAction::setChecked);
action->setChecked(showName);
headerPopup->addAction(action);
}
@@ -936,15 +937,18 @@ ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name)
configSettings->beginGroup(objectName());
setShowDebug(configSettings->value("/showDebug", false).toBool());
configSettings->endGroup();
- connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings()));
+ connect(configApp, &QApplication::aboutToQuit,
+ this, &ConfigInfoView::saveSettings);
}
contextMenu = createStandardContextMenu();
QAction *action = new QAction("Show Debug Info", contextMenu);
action->setCheckable(true);
- connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool)));
- connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setChecked(bool)));
+ connect(action, &QAction::toggled,
+ this, &ConfigInfoView::setShowDebug);
+ connect(this, &ConfigInfoView::showDebugChanged,
+ action, &QAction::setChecked);
action->setChecked(showDebug());
contextMenu->addSeparator();
contextMenu->addAction(action);
@@ -1231,11 +1235,13 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow *parent)
layout2->setSpacing(6);
layout2->addWidget(new QLabel("Find:", this));
editField = new QLineEdit(this);
- connect(editField, SIGNAL(returnPressed()), SLOT(search()));
+ connect(editField, &QLineEdit::returnPressed,
+ this, &ConfigSearchWindow::search);
layout2->addWidget(editField);
searchButton = new QPushButton("Search", this);
searchButton->setAutoDefault(false);
- connect(searchButton, SIGNAL(clicked()), SLOT(search()));
+ connect(searchButton, &QPushButton::clicked,
+ this, &ConfigSearchWindow::search);
layout2->addWidget(searchButton);
layout1->addLayout(layout2);
@@ -1244,10 +1250,10 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow *parent)
list = new ConfigList(split, "search");
list->mode = listMode;
info = new ConfigInfoView(split, "search");
- connect(list, SIGNAL(menuChanged(struct menu *)),
- info, SLOT(setInfo(struct menu *)));
- connect(list, SIGNAL(menuChanged(struct menu *)),
- parent, SLOT(setMenuLink(struct menu *)));
+ connect(list, &ConfigList::menuChanged,
+ info, &ConfigInfoView::setInfo);
+ connect(list, &ConfigList::menuChanged,
+ parent, &ConfigMainWindow::setMenuLink);
layout1->addWidget(split);
@@ -1267,7 +1273,8 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow *parent)
if (ok)
split->setSizes(sizes);
configSettings->endGroup();
- connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings()));
+ connect(configApp, &QApplication::aboutToQuit,
+ this, &ConfigSearchWindow::saveSettings);
}
void ConfigSearchWindow::saveSettings(void)
@@ -1367,19 +1374,23 @@ ConfigMainWindow::ConfigMainWindow(void)
configList->setFocus();
backAction = new QAction(QPixmap(xpm_back), "Back", this);
- connect(backAction, SIGNAL(triggered(bool)), SLOT(goBack()));
+ connect(backAction, &QAction::triggered,
+ this, &ConfigMainWindow::goBack);
QAction *quitAction = new QAction("&Quit", this);
quitAction->setShortcut(Qt::CTRL + Qt::Key_Q);
- connect(quitAction, SIGNAL(triggered(bool)), SLOT(close()));
+ connect(quitAction, &QAction::triggered,
+ this, &ConfigMainWindow::close);
QAction *loadAction = new QAction(QPixmap(xpm_load), "&Load", this);
loadAction->setShortcut(Qt::CTRL + Qt::Key_L);
- connect(loadAction, SIGNAL(triggered(bool)), SLOT(loadConfig()));
+ connect(loadAction, &QAction::triggered,
+ this, &ConfigMainWindow::loadConfig);
saveAction = new QAction(QPixmap(xpm_save), "&Save", this);
saveAction->setShortcut(Qt::CTRL + Qt::Key_S);
- connect(saveAction, SIGNAL(triggered(bool)), SLOT(saveConfig()));
+ connect(saveAction, &QAction::triggered,
+ this, &ConfigMainWindow::saveConfig);
conf_set_changed_callback(conf_changed);
@@ -1388,31 +1399,37 @@ ConfigMainWindow::ConfigMainWindow(void)
configname = xstrdup(conf_get_configname());
QAction *saveAsAction = new QAction("Save &As...", this);
- connect(saveAsAction, SIGNAL(triggered(bool)), SLOT(saveConfigAs()));
+ connect(saveAsAction, &QAction::triggered,
+ this, &ConfigMainWindow::saveConfigAs);
QAction *searchAction = new QAction("&Find", this);
searchAction->setShortcut(Qt::CTRL + Qt::Key_F);
- connect(searchAction, SIGNAL(triggered(bool)), SLOT(searchConfig()));
+ connect(searchAction, &QAction::triggered,
+ this, &ConfigMainWindow::searchConfig);
singleViewAction = new QAction(QPixmap(xpm_single_view), "Single View", this);
singleViewAction->setCheckable(true);
- connect(singleViewAction, SIGNAL(triggered(bool)), SLOT(showSingleView()));
+ connect(singleViewAction, &QAction::triggered,
+ this, &ConfigMainWindow::showSingleView);
splitViewAction = new QAction(QPixmap(xpm_split_view), "Split View", this);
splitViewAction->setCheckable(true);
- connect(splitViewAction, SIGNAL(triggered(bool)), SLOT(showSplitView()));
+ connect(splitViewAction, &QAction::triggered,
+ this, &ConfigMainWindow::showSplitView);
fullViewAction = new QAction(QPixmap(xpm_tree_view), "Full View", this);
fullViewAction->setCheckable(true);
- connect(fullViewAction, SIGNAL(triggered(bool)), SLOT(showFullView()));
+ connect(fullViewAction, &QAction::triggered,
+ this, &ConfigMainWindow::showFullView);
QAction *showNameAction = new QAction("Show Name", this);
showNameAction->setCheckable(true);
- connect(showNameAction, SIGNAL(toggled(bool)), configList, SLOT(setShowName(bool)));
+ connect(showNameAction, &QAction::toggled,
+ configList, &ConfigList::setShowName);
showNameAction->setChecked(configList->showName);
QActionGroup *optGroup = new QActionGroup(this);
optGroup->setExclusive(true);
- connect(optGroup, SIGNAL(triggered(QAction*)), configList,
- SLOT(setOptionMode(QAction *)));
- connect(optGroup, SIGNAL(triggered(QAction *)), menuList,
- SLOT(setOptionMode(QAction *)));
+ connect(optGroup, &QActionGroup::triggered,
+ configList, &ConfigList::setOptionMode);
+ connect(optGroup, &QActionGroup::triggered,
+ menuList, &ConfigList::setOptionMode);
ConfigList::showNormalAction = new QAction("Show Normal Options", optGroup);
ConfigList::showNormalAction->setCheckable(true);
@@ -1423,13 +1440,16 @@ ConfigMainWindow::ConfigMainWindow(void)
QAction *showDebugAction = new QAction("Show Debug Info", this);
showDebugAction->setCheckable(true);
- connect(showDebugAction, SIGNAL(toggled(bool)), helpText, SLOT(setShowDebug(bool)));
+ connect(showDebugAction, &QAction::toggled,
+ helpText, &ConfigInfoView::setShowDebug);
showDebugAction->setChecked(helpText->showDebug());
QAction *showIntroAction = new QAction("Introduction", this);
- connect(showIntroAction, SIGNAL(triggered(bool)), SLOT(showIntro()));
+ connect(showIntroAction, &QAction::triggered,
+ this, &ConfigMainWindow::showIntro);
QAction *showAboutAction = new QAction("About", this);
- connect(showAboutAction, SIGNAL(triggered(bool)), SLOT(showAbout()));
+ connect(showAboutAction, &QAction::triggered,
+ this, &ConfigMainWindow::showAbout);
// init tool bar
QToolBar *toolBar = addToolBar("Tools");
@@ -1467,30 +1487,30 @@ ConfigMainWindow::ConfigMainWindow(void)
menu->addAction(showIntroAction);
menu->addAction(showAboutAction);
- connect (helpText, SIGNAL (anchorClicked (const QUrl &)),
- helpText, SLOT (clicked (const QUrl &)) );
-
- connect(configList, SIGNAL(menuChanged(struct menu *)),
- helpText, SLOT(setInfo(struct menu *)));
- connect(configList, SIGNAL(menuSelected(struct menu *)),
- SLOT(changeMenu(struct menu *)));
- connect(configList, SIGNAL(itemSelected(struct menu *)),
- SLOT(changeItens(struct menu *)));
- connect(configList, SIGNAL(parentSelected()),
- SLOT(goBack()));
- connect(menuList, SIGNAL(menuChanged(struct menu *)),
- helpText, SLOT(setInfo(struct menu *)));
- connect(menuList, SIGNAL(menuSelected(struct menu *)),
- SLOT(changeMenu(struct menu *)));
-
- connect(configList, SIGNAL(gotFocus(struct menu *)),
- helpText, SLOT(setInfo(struct menu *)));
- connect(menuList, SIGNAL(gotFocus(struct menu *)),
- helpText, SLOT(setInfo(struct menu *)));
- connect(menuList, SIGNAL(gotFocus(struct menu *)),
- SLOT(listFocusChanged(void)));
- connect(helpText, SIGNAL(menuSelected(struct menu *)),
- SLOT(setMenuLink(struct menu *)));
+ connect(helpText, &ConfigInfoView::anchorClicked,
+ helpText, &ConfigInfoView::clicked);
+
+ connect(configList, &ConfigList::menuChanged,
+ helpText, &ConfigInfoView::setInfo);
+ connect(configList, &ConfigList::menuSelected,
+ this, &ConfigMainWindow::changeMenu);
+ connect(configList, &ConfigList::itemSelected,
+ this, &ConfigMainWindow::changeItens);
+ connect(configList, &ConfigList::parentSelected,
+ this, &ConfigMainWindow::goBack);
+ connect(menuList, &ConfigList::menuChanged,
+ helpText, &ConfigInfoView::setInfo);
+ connect(menuList, &ConfigList::menuSelected,
+ this, &ConfigMainWindow::changeMenu);
+
+ connect(configList, &ConfigList::gotFocus,
+ helpText, &ConfigInfoView::setInfo);
+ connect(menuList, &ConfigList::gotFocus,
+ helpText, &ConfigInfoView::setInfo);
+ connect(menuList, &ConfigList::gotFocus,
+ this, &ConfigMainWindow::listFocusChanged);
+ connect(helpText, &ConfigInfoView::menuSelected,
+ this, &ConfigMainWindow::setMenuLink);
QString listMode = configSettings->value("/listMode", "symbol").toString();
if (listMode == "single")
--
2.25.1
Masahiro Yamada <[email protected]> writes:
> Now that the Qt4 support was dropped, we can use the new connection
> syntax supported by Qt5. It provides compile-time checking of the
> validity of the connection.
>
> Previously, the connection between signals and slots were checked
> only run-time.
>
> Commit d85de3399f97 ("kconfig: qconf: fix signal connection to invalid
> slots") fixed wrong slots.
>
> This change makes it possible to catch such mistakes easily.
>
> Signed-off-by: Masahiro Yamada <[email protected]>
Tested-by: Boris Kolpackov <[email protected]>