Convert the RN5T618 binding to DT schema format. Also
clearly state which regulators are available.
Signed-off-by: Andreas Kemnade <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
https://lore.kernel.org/lkml/CAL_JsqJWt91+aZwAWEUVjOBQgsYw6GBHqmoHwU_T5qZabxX+Aw@mail.gmail.com/
Changes in v2:
- drop irq description
Due to its .txt-format history BSD license was not added.
.../bindings/mfd/ricoh,rn5t618.yaml | 111 ++++++++++++++++++
.../devicetree/bindings/mfd/rn5t618.txt | 52 --------
2 files changed, 111 insertions(+), 52 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/rn5t618.txt
diff --git a/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
new file mode 100644
index 000000000000..d70e85a09c84
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ricoh,rn5t618.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ricoh RN5T567/RN5T618/RC5T619 PMIC
+
+maintainers:
+ - Andreas Kemnade <[email protected]>
+
+description: |
+ Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which
+ integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators,
+ GPIOs, and a watchdog timer. It can be controlled through an I2C interface.
+ The RN5T618/RC5T619 provides additionally a Li-ion battery charger,
+ fuel gauge, and an ADC.
+ The RC5T619 additionnally includes USB charger detection and an RTC.
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ricoh,rn5t567
+ then:
+ properties:
+ regulators:
+ patternProperties:
+ "^(DCDC[1-4]|LDO[1-5]|LDORTC[12])$":
+ $ref: ../regulator/regulator.yaml
+ additionalProperties: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ricoh,rn5t618
+ then:
+ properties:
+ regulators:
+ patternProperties:
+ "^(DCDC[1-3]|LDO[1-5]|LDORTC[12])$":
+ $ref: ../regulator/regulator.yaml
+ additionalProperties: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ricoh,rc5t619
+ then:
+ properties:
+ regulators:
+ patternProperties:
+ "^(DCDC[1-5]|LDO[1-9]|LDO10|LDORTC[12])$":
+ $ref: ../regulator/regulator.yaml
+ additionalProperties: false
+
+properties:
+ compatible:
+ enum:
+ - ricoh,rn5t567
+ - ricoh,rn5t618
+ - ricoh,rc5t619
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ system-power-controller:
+ type: boolean
+ description: |
+ See Documentation/devicetree/bindings/power/power-controller.txt
+
+ regulators:
+ type: object
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@32 {
+ compatible = "ricoh,rn5t618";
+ reg = <0x32>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ system-power-controller;
+
+ regulators {
+ DCDC1 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ DCDC2 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt
deleted file mode 100644
index 16778ea00dbc..000000000000
--- a/Documentation/devicetree/bindings/mfd/rn5t618.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Ricoh RN5T567/RN5T618 PMIC
-
-Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which
-integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators,
-GPIOs, and a watchdog timer. It can be controlled through an I2C interface.
-The RN5T618/RC5T619 provides additionally a Li-ion battery charger,
-fuel gauge, and an ADC.
-The RC5T619 additionnally includes USB charger detection and an RTC.
-
-Required properties:
- - compatible: must be one of
- "ricoh,rn5t567"
- "ricoh,rn5t618"
- "ricoh,rc5t619"
- - reg: the I2C slave address of the device
-
-Optional properties:
- - interrupts: interrupt mapping for IRQ
- See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- - system-power-controller:
- See Documentation/devicetree/bindings/power/power-controller.txt
-
-Sub-nodes:
- - regulators: the node is required if the regulator functionality is
- needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
- (RN5T567/RC5T619), LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, LDO8,
- LDO9, LDO10, LDORTC1 and LDORTC2.
- LDO7-10 are specific to RC5T619.
- The common bindings for each individual regulator can be found in:
- Documentation/devicetree/bindings/regulator/regulator.txt
-
-Example:
-
- pmic@32 {
- compatible = "ricoh,rn5t618";
- reg = <0x32>;
- interrupt-parent = <&gpio5>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
- system-power-controller;
-
- regulators {
- DCDC1 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
-
- DCDC2 {
- regulator-min-microvolt = <1175000>;
- regulator-max-microvolt = <1175000>;
- };
- };
- };
--
2.20.1
On Sun, 31 Jan 2021, Andreas Kemnade wrote:
> Convert the RN5T618 binding to DT schema format. Also
> clearly state which regulators are available.
>
> Signed-off-by: Andreas Kemnade <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
> ---
> https://lore.kernel.org/lkml/CAL_JsqJWt91+aZwAWEUVjOBQgsYw6GBHqmoHwU_T5qZabxX+Aw@mail.gmail.com/
>
> Changes in v2:
> - drop irq description
>
> Due to its .txt-format history BSD license was not added.
> .../bindings/mfd/ricoh,rn5t618.yaml | 111 ++++++++++++++++++
> .../devicetree/bindings/mfd/rn5t618.txt | 52 --------
> 2 files changed, 111 insertions(+), 52 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
> delete mode 100644 Documentation/devicetree/bindings/mfd/rn5t618.txt
Applied, thanks.
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog