From: Greg Kroah-Hartman <[email protected]>
This is the start of the stable review cycle for the 4.4.261 release.
There are 7 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri, 12 Mar 2021 13:23:09 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.261-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.261-rc1
Bjorn Helgaas <[email protected]>
PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller
Hans de Goede <[email protected]>
platform/x86: acer-wmi: Add new force_caps module parameter
Jeffle Xu <[email protected]>
dm table: fix iterate_devices based device capability checks
Dan Carpenter <[email protected]>
rsxx: Return -EFAULT if copy_to_user() fails
Colin Ian King <[email protected]>
ALSA: ctxfi: cthw20k2: fix mask on conf to allow 4 bits
Thomas Schoebel-Theuer <[email protected]>
futex: fix spin_lock() / spin_unlock_irq() imbalance
Thomas Schoebel-Theuer <[email protected]>
futex: fix irq self-deadlock and satisfy assertion
-------------
Diffstat:
Makefile | 4 +-
drivers/block/rsxx/core.c | 8 ++--
drivers/md/dm-table.c | 83 ++++++++++++++++++++++++++---------------
drivers/pci/quirks.c | 3 ++
drivers/platform/x86/acer-wmi.c | 8 +++-
kernel/futex.c | 4 +-
sound/pci/ctxfi/cthw20k2.c | 2 +-
7 files changed, 74 insertions(+), 38 deletions(-)
From: Greg Kroah-Hartman <[email protected]>
From: Jeffle Xu <[email protected]>
commit a4c8dd9c2d0987cf542a2a0c42684c9c6d78a04e upstream.
According to the definition of dm_iterate_devices_fn:
* This function must iterate through each section of device used by the
* target until it encounters a non-zero return code, which it then returns.
* Returns zero if no callout returned non-zero.
For some target type (e.g. dm-stripe), one call of iterate_devices() may
iterate multiple underlying devices internally, in which case a non-zero
return code returned by iterate_devices_callout_fn will stop the iteration
in advance. No iterate_devices_callout_fn should return non-zero unless
device iteration should stop.
Rename dm_table_requires_stable_pages() to dm_table_any_dev_attr() and
elevate it for reuse to stop iterating (and return non-zero) on the
first device that causes iterate_devices_callout_fn to return non-zero.
Use dm_table_any_dev_attr() to properly iterate through devices.
Rename device_is_nonrot() to device_is_rotational() and invert logic
accordingly to fix improper disposition.
[jeffle: backport notes]
No stable writes. Also convert the no_sg_merge capability check,
which is introduced by commit 200612ec33e5 ("dm table: propagate
QUEUE_FLAG_NO_SG_MERGE"), and removed since commit 2705c93742e9 ("block:
kill QUEUE_FLAG_NO_SG_MERGE") in v5.1.
Fixes: c3c4555edd10 ("dm table: clear add_random unless all devices have it set")
Fixes: 4693c9668fdc ("dm table: propagate non rotational flag")
Cc: [email protected]
Signed-off-by: Jeffle Xu <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-table.c | 83 +++++++++++++++++++++++++++++++-------------------
1 file changed, 53 insertions(+), 30 deletions(-)
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1210,6 +1210,46 @@ struct dm_target *dm_table_find_target(s
return &t->targets[(KEYS_PER_NODE * n) + k];
}
+/*
+ * type->iterate_devices() should be called when the sanity check needs to
+ * iterate and check all underlying data devices. iterate_devices() will
+ * iterate all underlying data devices until it encounters a non-zero return
+ * code, returned by whether the input iterate_devices_callout_fn, or
+ * iterate_devices() itself internally.
+ *
+ * For some target type (e.g. dm-stripe), one call of iterate_devices() may
+ * iterate multiple underlying devices internally, in which case a non-zero
+ * return code returned by iterate_devices_callout_fn will stop the iteration
+ * in advance.
+ *
+ * Cases requiring _any_ underlying device supporting some kind of attribute,
+ * should use the iteration structure like dm_table_any_dev_attr(), or call
+ * it directly. @func should handle semantics of positive examples, e.g.
+ * capable of something.
+ *
+ * Cases requiring _all_ underlying devices supporting some kind of attribute,
+ * should use the iteration structure like dm_table_supports_nowait() or
+ * dm_table_supports_discards(). Or introduce dm_table_all_devs_attr() that
+ * uses an @anti_func that handle semantics of counter examples, e.g. not
+ * capable of something. So: return !dm_table_any_dev_attr(t, anti_func);
+ */
+static bool dm_table_any_dev_attr(struct dm_table *t,
+ iterate_devices_callout_fn func)
+{
+ struct dm_target *ti;
+ unsigned int i;
+
+ for (i = 0; i < dm_table_get_num_targets(t); i++) {
+ ti = dm_table_get_target(t, i);
+
+ if (ti->type->iterate_devices &&
+ ti->type->iterate_devices(ti, func, NULL))
+ return true;
+ }
+
+ return false;
+}
+
static int count_device(struct dm_target *ti, struct dm_dev *dev,
sector_t start, sector_t len, void *data)
{
@@ -1380,12 +1420,12 @@ static bool dm_table_discard_zeroes_data
return true;
}
-static int device_is_nonrot(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, sector_t len, void *data)
+static int device_is_rotational(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
{
struct request_queue *q = bdev_get_queue(dev->bdev);
- return q && blk_queue_nonrot(q);
+ return q && !blk_queue_nonrot(q);
}
static int device_is_not_random(struct dm_target *ti, struct dm_dev *dev,
@@ -1396,29 +1436,12 @@ static int device_is_not_random(struct d
return q && !blk_queue_add_random(q);
}
-static int queue_supports_sg_merge(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, sector_t len, void *data)
+static int queue_no_sg_merge(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
{
struct request_queue *q = bdev_get_queue(dev->bdev);
- return q && !test_bit(QUEUE_FLAG_NO_SG_MERGE, &q->queue_flags);
-}
-
-static bool dm_table_all_devices_attribute(struct dm_table *t,
- iterate_devices_callout_fn func)
-{
- struct dm_target *ti;
- unsigned i = 0;
-
- while (i < dm_table_get_num_targets(t)) {
- ti = dm_table_get_target(t, i++);
-
- if (!ti->type->iterate_devices ||
- !ti->type->iterate_devices(ti, func, NULL))
- return false;
- }
-
- return true;
+ return q && test_bit(QUEUE_FLAG_NO_SG_MERGE, &q->queue_flags);
}
static int device_not_write_same_capable(struct dm_target *ti, struct dm_dev *dev,
@@ -1511,18 +1534,18 @@ void dm_table_set_restrictions(struct dm
q->limits.discard_zeroes_data = 0;
/* Ensure that all underlying devices are non-rotational. */
- if (dm_table_all_devices_attribute(t, device_is_nonrot))
- queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
- else
+ if (dm_table_any_dev_attr(t, device_is_rotational))
queue_flag_clear_unlocked(QUEUE_FLAG_NONROT, q);
+ else
+ queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
if (!dm_table_supports_write_same(t))
q->limits.max_write_same_sectors = 0;
- if (dm_table_all_devices_attribute(t, queue_supports_sg_merge))
- queue_flag_clear_unlocked(QUEUE_FLAG_NO_SG_MERGE, q);
- else
+ if (dm_table_any_dev_attr(t, queue_no_sg_merge))
queue_flag_set_unlocked(QUEUE_FLAG_NO_SG_MERGE, q);
+ else
+ queue_flag_clear_unlocked(QUEUE_FLAG_NO_SG_MERGE, q);
dm_table_verify_integrity(t);
@@ -1532,7 +1555,7 @@ void dm_table_set_restrictions(struct dm
* Clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not
* have it set.
*/
- if (blk_queue_add_random(q) && dm_table_all_devices_attribute(t, device_is_not_random))
+ if (blk_queue_add_random(q) && dm_table_any_dev_attr(t, device_is_not_random))
queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q);
/*
From: Greg Kroah-Hartman <[email protected]>
From: Bjorn Helgaas <[email protected]>
[ Upstream commit 059983790a4c963d92943e55a61fca55be427d55 ]
Add function 1 DMA alias quirk for Marvell 88SS9215 PCIe SSD Controller.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679#c135
Link: https://lore.kernel.org/r/[email protected]
Reported-by: John Smith <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/quirks.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bdaeccafa261..bc0aa0849e72 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3649,6 +3649,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a,
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0,
quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c135 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9215,
+ quirk_dma_func1_alias);
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c127 */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9220,
quirk_dma_func1_alias);
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Hans de Goede <[email protected]>
[ Upstream commit 39aa009bb66f9d5fbd1e58ca4aa03d6e6f2c9915 ]
Add a new force_caps module parameter to allow overriding the drivers
builtin capability detection mechanism.
This can be used to for example:
-Disable rfkill functionality on devices where there is an AA OEM DMI
record advertising non functional rfkill switches
-Force loading of the driver on devices with a missing AA OEM DMI record
Note that force_caps is -1 when unset, this allows forcing the
capability field to 0, which results in acer-wmi only providing WMI
hotkey handling while disabling all other (led, rfkill, backlight)
functionality.
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/acer-wmi.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index b336f2620f9d..e4f278fa6d69 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -229,6 +229,7 @@ static int mailled = -1;
static int brightness = -1;
static int threeg = -1;
static int force_series;
+static int force_caps = -1;
static bool ec_raw_mode;
static bool has_type_aa;
static u16 commun_func_bitmap;
@@ -238,11 +239,13 @@ module_param(mailled, int, 0444);
module_param(brightness, int, 0444);
module_param(threeg, int, 0444);
module_param(force_series, int, 0444);
+module_param(force_caps, int, 0444);
module_param(ec_raw_mode, bool, 0444);
MODULE_PARM_DESC(mailled, "Set initial state of Mail LED");
MODULE_PARM_DESC(brightness, "Set initial LCD backlight brightness");
MODULE_PARM_DESC(threeg, "Set initial state of 3G hardware");
MODULE_PARM_DESC(force_series, "Force a different laptop series");
+MODULE_PARM_DESC(force_caps, "Force the capability bitmask to this value");
MODULE_PARM_DESC(ec_raw_mode, "Enable EC raw mode");
struct acer_data {
@@ -2150,7 +2153,7 @@ static int __init acer_wmi_init(void)
}
/* WMID always provides brightness methods */
interface->capability |= ACER_CAP_BRIGHTNESS;
- } else if (!wmi_has_guid(WMID_GUID2) && interface && !has_type_aa) {
+ } else if (!wmi_has_guid(WMID_GUID2) && interface && !has_type_aa && force_caps == -1) {
pr_err("No WMID device detection method found\n");
return -ENODEV;
}
@@ -2180,6 +2183,9 @@ static int __init acer_wmi_init(void)
if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
interface->capability &= ~ACER_CAP_BRIGHTNESS;
+ if (force_caps != -1)
+ interface->capability = force_caps;
+
if (wmi_has_guid(WMID_GUID3)) {
if (ec_raw_mode) {
if (ACPI_FAILURE(acer_wmi_enable_ec_raw())) {
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Colin Ian King <[email protected]>
[ Upstream commit 26a9630c72ebac7c564db305a6aee54a8edde70e ]
Currently the mask operation on variable conf is just 3 bits so
the switch statement case value of 8 is unreachable dead code.
The function daio_mgr_dao_init can be passed a 4 bit value,
function dao_rsc_init calls it with conf set to:
conf = (desc->msr & 0x7) | (desc->passthru << 3);
so clearly when desc->passthru is set to 1 then conf can be
at least 8.
Fix this by changing the mask to 0xf.
Fixes: 8cc72361481f ("ALSA: SB X-Fi driver merge")
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/ctxfi/cthw20k2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/pci/ctxfi/cthw20k2.c b/sound/pci/ctxfi/cthw20k2.c
index d86678c2a957..5beb4a3d203b 100644
--- a/sound/pci/ctxfi/cthw20k2.c
+++ b/sound/pci/ctxfi/cthw20k2.c
@@ -995,7 +995,7 @@ static int daio_mgr_dao_init(void *blk, unsigned int idx, unsigned int conf)
if (idx < 4) {
/* S/PDIF output */
- switch ((conf & 0x7)) {
+ switch ((conf & 0xf)) {
case 1:
set_field(&ctl->txctl[idx], ATXCTL_NUC, 0);
break;
--
2.30.1
From: Greg Kroah-Hartman <[email protected]>
From: Dan Carpenter <[email protected]>
[ Upstream commit 77516d25f54912a7baedeeac1b1b828b6f285152 ]
The copy_to_user() function returns the number of bytes remaining but
we want to return -EFAULT to the user if it can't complete the copy.
The "st" variable only holds zero on success or negative error codes on
failure so the type should be int.
Fixes: 36f988e978f8 ("rsxx: Adding in debugfs entries.")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/rsxx/core.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/block/rsxx/core.c b/drivers/block/rsxx/core.c
index 620a3a67cdd5..0d9137408e3c 100644
--- a/drivers/block/rsxx/core.c
+++ b/drivers/block/rsxx/core.c
@@ -180,15 +180,17 @@ static ssize_t rsxx_cram_read(struct file *fp, char __user *ubuf,
{
struct rsxx_cardinfo *card = file_inode(fp)->i_private;
char *buf;
- ssize_t st;
+ int st;
buf = kzalloc(cnt, GFP_KERNEL);
if (!buf)
return -ENOMEM;
st = rsxx_creg_read(card, CREG_ADD_CRAM + (u32)*ppos, cnt, buf, 1);
- if (!st)
- st = copy_to_user(ubuf, buf, cnt);
+ if (!st) {
+ if (copy_to_user(ubuf, buf, cnt))
+ st = -EFAULT;
+ }
kfree(buf);
if (st)
return st;
--
2.30.1
Hi!
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.4.261 release.
> There are 7 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On 3/10/21 6:25 AM, [email protected] wrote:
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.4.261 release.
> There are 7 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 12 Mar 2021 13:23:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.261-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On Wed, Mar 10, 2021 at 02:25:13PM +0100, [email protected] wrote:
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.4.261 release.
> There are 7 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 12 Mar 2021 13:23:09 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 165 pass: 165 fail: 0
Qemu test results:
total: 331 pass: 331 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On Wed, 10 Mar 2021 at 18:57, <[email protected]> wrote:
>
> From: Greg Kroah-Hartman <[email protected]>
>
> This is the start of the stable review cycle for the 4.4.261 release.
> There are 7 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 12 Mar 2021 13:23:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.261-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
Summary
------------------------------------------------------------------------
kernel: 4.4.261-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 9de32cd2fc5194157c9c116eec56a219048dc511
git describe: v4.4.260-8-g9de32cd2fc51
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.4.y/build/v4.4.260-8-g9de32cd2fc51
No regressions (compared to build v4.4.260)
No fixes (compared to build v4.4.260)
Ran 26428 total tests in the following environments and test suites.
Environments
--------------
- arm
- arm64
- i386
- juno-64k_page_size
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- mips
- qemu-arm64-kasan
- qemu-x86_64-kasan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- sparc
- x15 - arm
- x86_64
- x86-kasan
- x86_64
Test Suites
-----------
* build
* linux-log-parser
* libhugetlbfs
* ltp-commands-tests
* ltp-containers-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-tracing-tests
* network-basic-tests
* ltp-cap_bounds-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-mm-tests
* ltp-sched-tests
* ltp-syscalls-tests
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-zram
* kvm-unit-tests
* ltp-open-posix-tests
* perf
* v4l2-compliance
* install-android-platform-tools-r2600
* kselftest-kvm
* kselftest-vm
* fwts
Summary
------------------------------------------------------------------------
kernel: 4.4.261-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.261-rc1-hikey-20210310-953
git commit: bf1bdacd039d70403f1ce3196f223cae689ca15f
git describe: 4.4.261-rc1-hikey-20210310-953
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.261-rc1-hikey-20210310-953
No regressions (compared to build 4.4.261-rc1-hikey-20210308-951)
No fixes (compared to build 4.4.261-rc1-hikey-20210308-951)
Ran 1965 total tests in the following environments and test suites.
Environments
--------------
- hi6220-hikey - arm64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-zram
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org