Convert common clock for Xilinx Zynq MPSoC SoC bindings documentation
to YAML.
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
---
v2: Fix warning with DT_CHECKER_FLAGS=-m.
.../bindings/clock/xlnx,zynqmp-clk.txt | 63 ---------
.../bindings/clock/xlnx,zynqmp-clk.yaml | 63 +++++++++
.../mailbox/xlnx,zynqmp-ipi-mailbox.txt | 127 ------------------
3 files changed, 63 insertions(+), 190 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
create mode 100644 Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.yaml
delete mode 100644 Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
diff --git a/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
deleted file mode 100644
index 391ee1a60bed4a..00000000000000
--- a/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
+++ /dev/null
@@ -1,63 +0,0 @@
---------------------------------------------------------------------------
-Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using
-Zynq MPSoC firmware interface
---------------------------------------------------------------------------
-The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock
-tree. It reads required input clock frequencies from the devicetree and acts
-as clock provider for all clock consumers of PS clocks.
-
-See clock_bindings.txt for more information on the generic clock bindings.
-
-Required properties:
- - #clock-cells: Must be 1
- - compatible: Must contain: "xlnx,zynqmp-clk"
- - clocks: List of clock specifiers which are external input
- clocks to the given clock controller. Please refer
- the next section to find the input clocks for a
- given controller.
- - clock-names: List of clock names which are exteral input clocks
- to the given clock controller. Please refer to the
- clock bindings for more details.
-
-Input clocks for zynqmp Ultrascale+ clock controller:
-
-The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock
-inputs. These required clock inputs are:
- - pss_ref_clk (PS reference clock)
- - video_clk (reference clock for video system )
- - pss_alt_ref_clk (alternative PS reference clock)
- - aux_ref_clk
- - gt_crx_ref_clk (transceiver reference clock)
-
-The following strings are optional parameters to the 'clock-names' property in
-order to provide an optional (E)MIO clock source:
- - swdt0_ext_clk
- - swdt1_ext_clk
- - gem0_emio_clk
- - gem1_emio_clk
- - gem2_emio_clk
- - gem3_emio_clk
- - mio_clk_XX # with XX = 00..77
- - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51
-
-
-Output clocks are registered based on clock information received
-from firmware. Output clocks indexes are mentioned in
-include/dt-bindings/clock/xlnx-zynqmp-clk.h.
-
--------
-Example
--------
-
-firmware {
- zynqmp_firmware: zynqmp-firmware {
- compatible = "xlnx,zynqmp-firmware";
- method = "smc";
- zynqmp_clk: clock-controller {
- #clock-cells = <1>;
- compatible = "xlnx,zynqmp-clk";
- clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>;
- clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.yaml b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.yaml
new file mode 100644
index 00000000000000..e7a1384fb646e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/xlnx,zynqmp-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale+ MPSoC clock controller Device Tree Bindings
+
+maintainers:
+ - Michal Simek <[email protected]>
+
+description: |
+ The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock
+ tree. It reads required input clock frequencies from the devicetree and acts
+ as clock provider for all clock consumers of PS clocks.
+
+properties:
+ compatible:
+ const: xlnx,zynqmp-clk
+
+ "#clock-cells":
+ const: 1
+
+ clocks:
+ description: |
+ List of clock specifiers which are external input
+ clocks to the given clock controller.
+ items:
+ - description: PS reference clock
+ - description: reference clock for video system
+ - description: alternative PS reference clock
+ - description: auxiliary reference clock
+ - description: transceiver reference clock
+
+ clock-names:
+ items:
+ - const: pss_ref_clk
+ - const: video_clk
+ - const: pss_alt_ref_clk
+ - const: aux_ref_clk
+ - const: gt_crx_ref_clk
+
+required:
+ - compatible
+ - "#clock-cells"
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ zynqmp_clk: clock-controller {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynqmp-clk";
+ clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>;
+ clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
deleted file mode 100644
index ad76edccf88166..00000000000000
--- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-Xilinx IPI Mailbox Controller
-========================================
-
-The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
-messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
-agent owns registers used for notification and buffers for message.
-
- +-------------------------------------+
- | Xilinx ZynqMP IPI Controller |
- +-------------------------------------+
- +--------------------------------------------------+
-ATF | |
- | |
- | |
- +--------------------------+ |
- | |
- | |
- +--------------------------------------------------+
- +------------------------------------------+
- | +----------------+ +----------------+ |
-Hardware | | IPI Agent | | IPI Buffers | |
- | | Registers | | | |
- | | | | | |
- | +----------------+ +----------------+ |
- | |
- | Xilinx IPI Agent Block |
- +------------------------------------------+
-
-
-Controller Device Node:
-===========================
-Required properties:
---------------------
-IPI agent node:
-- compatible: Shall be: "xlnx,zynqmp-ipi-mailbox"
-- interrupt-parent: Phandle for the interrupt controller
-- interrupts: Interrupt information corresponding to the
- interrupt-names property.
-- xlnx,ipi-id: local Xilinx IPI agent ID
-- #address-cells: number of address cells of internal IPI mailbox nodes
-- #size-cells: number of size cells of internal IPI mailbox nodes
-
-Internal IPI mailbox node:
-- reg: IPI buffers address ranges
-- reg-names: Names of the reg resources. It should have:
- * local_request_region
- - IPI request msg buffer written by local and read
- by remote
- * local_response_region
- - IPI response msg buffer written by local and read
- by remote
- * remote_request_region
- - IPI request msg buffer written by remote and read
- by local
- * remote_response_region
- - IPI response msg buffer written by remote and read
- by local
-- #mbox-cells: Shall be 1. It contains:
- * tx(0) or rx(1) channel
-- xlnx,ipi-id: remote Xilinx IPI agent ID of which the mailbox is
- connected to.
-
-Optional properties:
---------------------
-- method: The method of accessing the IPI agent registers.
- Permitted values are: "smc" and "hvc". Default is
- "smc".
-
-Client Device Node:
-===========================
-Required properties:
---------------------
-- mboxes: Standard property to specify a mailbox
- (See ./mailbox.txt)
-- mbox-names: List of identifier strings for each mailbox
- channel.
-
-Example:
-===========================
- zynqmp_ipi {
- compatible = "xlnx,zynqmp-ipi-mailbox";
- interrupt-parent = <&gic>;
- interrupts = <0 29 4>;
- xlnx,ipi-id = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /* APU<->RPU0 IPI mailbox controller */
- ipi_mailbox_rpu0: mailbox@ff990400 {
- reg = <0xff990400 0x20>,
- <0xff990420 0x20>,
- <0xff990080 0x20>,
- <0xff9900a0 0x20>;
- reg-names = "local_request_region",
- "local_response_region",
- "remote_request_region",
- "remote_response_region";
- #mbox-cells = <1>;
- xlnx,ipi-id = <1>;
- };
- /* APU<->RPU1 IPI mailbox controller */
- ipi_mailbox_rpu1: mailbox@ff990440 {
- reg = <0xff990440 0x20>,
- <0xff990460 0x20>,
- <0xff990280 0x20>,
- <0xff9902a0 0x20>;
- reg-names = "local_request_region",
- "local_response_region",
- "remote_request_region",
- "remote_response_region";
- #mbox-cells = <1>;
- xlnx,ipi-id = <2>;
- };
- };
- rpu0 {
- ...
- mboxes = <&ipi_mailbox_rpu0 0>,
- <&ipi_mailbox_rpu0 1>;
- mbox-names = "tx", "rx";
- };
- rpu1 {
- ...
- mboxes = <&ipi_mailbox_rpu1 0>,
- <&ipi_mailbox_rpu1 1>;
- mbox-names = "tx", "rx";
- };
--
2.30.0
On Wed, Jun 02, 2021 at 09:14:49AM +0900, Nobuhiro Iwamatsu wrote:
> Convert common clock for Xilinx Zynq MPSoC SoC bindings documentation
> to YAML.
>
> Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
> ---
>
> v2: Fix warning with DT_CHECKER_FLAGS=-m.
>
> .../bindings/clock/xlnx,zynqmp-clk.txt | 63 ---------
> .../bindings/clock/xlnx,zynqmp-clk.yaml | 63 +++++++++
> .../mailbox/xlnx,zynqmp-ipi-mailbox.txt | 127 ------------------
Why is this removed?
Otherwise, looks fine.
> 3 files changed, 63 insertions(+), 190 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
> create mode 100644 Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.yaml
> delete mode 100644 Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
Hi,
Thanks for your review.
2021年6月11日(金) 2:50 Rob Herring <[email protected]>:
>
> On Wed, Jun 02, 2021 at 09:14:49AM +0900, Nobuhiro Iwamatsu wrote:
> > Convert common clock for Xilinx Zynq MPSoC SoC bindings documentation
> > to YAML.
> >
> > Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
> > ---
> >
> > v2: Fix warning with DT_CHECKER_FLAGS=-m.
> >
> > .../bindings/clock/xlnx,zynqmp-clk.txt | 63 ---------
> > .../bindings/clock/xlnx,zynqmp-clk.yaml | 63 +++++++++
> > .../mailbox/xlnx,zynqmp-ipi-mailbox.txt | 127 ------------------
>
> Why is this removed?
My bad. I will fix this as v3
>
> Otherwise, looks fine.
Thank you.
>
> > 3 files changed, 63 insertions(+), 190 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.txt
> > create mode 100644 Documentation/devicetree/bindings/clock/xlnx,zynqmp-clk.yaml
> > delete mode 100644 Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
Best regards,
Nobuhiro
--
Nobuhiro Iwamatsu
iwamatsu at {nigauri.org / debian.org}
GPG ID: 40AD1FA6