I tried it, rebooted and still no luck. Is there anything I can check in my
proc files to see if I have a conflict?
Dave
>
>
> Remove your swap from your /etc/fstab and see if your problem goes away.
>
> On Thu, Nov 16, 2000 at 02:42:44AM -0500, David Won wrote:
> > Delivered-To: [email protected]
> > From: David Won
> > Date: Thu, 16 Nov 2000 02:42:44 -0500
> > X-Mailer: KMail [version 1.1.99]
> > Cc: Gregory Maxwell ,
> > [email protected]
> > To: "Arnaud S . Launay"
> > In-Reply-To: <[email protected]>
> > Subject: Re: Newby help. Tons and tons of Oops
> >
> > I just noticed these errors in my log as well. Something is weird with my
> > swapping I think. If I get Oops that say "Unable to handle kernel paging
> > request at virtual address ff7f1014" would that not be swap since it is
> > virtual?
> > The errors that make me think it may be with my swapper are as follows.
> >
> > Nov 12 21:12:51 phlegmish kernel: swap_free: Trying to free nonexistent
> > swap-page
> > Nov 12 21:12:51 phlegmish kernel: swap_free: Trying to free nonexistent
> > swap-page
> > Nov 14 02:57:28 phlegmish rc.sysinit: Enabling swap space: succeeded
> > Nov 14 03:01:51 phlegmish kernel: swap_free: offset exceeds max
> > Nov 14 03:01:51 phlegmish kernel: swap_free: offset exceeds max
> > Nov 14 03:17:37 phlegmish kernel: swap_free: Trying to free nonexistent
> > swap-page
> > Nov 14 03:17:37 phlegmish kernel: swap_free: Trying to free nonexistent
> > swap-page
> >
> >
> > And so on......
> > I tried deleting my swap partiton and recreating it but that made no
> > difference. Any ideas or things to try?
> >
> > Thanks for the help so far
> > Dave
> >
> > On Monday 13 November 2000 10:22, Arnaud S . Launay wrote:
> > > Le Mon, Nov 13, 2000 at 07:59:24AM -0500, David Won a ?crit:
> > > > I'm running 2.4.0test11pre3. but the kernel shipped with Redhat 7
> > > > doesn't work either. When I was running 2.2.15 and RedHat 6.2 before
> > > > upgrading it worked great. Never had an oops ever.
> > > > I ran a memory checker under dos as well and it didn't find anything.
> > > > Any tips?
> > >
> > > Could you please check:
> > > 1/ if memtest really worked, as I had problems with 2.4 (in fact, it
> > > wasn't launched, I had to downgrade to 2.3 for having a test) (have you
> > > seen a scrolling bar of '#' ?) (anyway, i'm sending 2.3 binary
> > > privatly) 2/ your hardware internal temperature (put your hand into the
> > > box) 3/ if every cable is correctly plugged in
> > >
> > > It looks to me like an hardware failure, not a software one.
> > >
> > > Arnaud.
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe linux-kernel"
> > > in the body of a message to [email protected]
> > > Please read the FAQ at http://www.tux.org/lkml/