--
Antoniu Micl?u?
> -----Original Message-----
> From: Antoniu Miclaus <[email protected]>
> Sent: Monday, February 7, 2022 3:06 PM
> To: [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]
> Cc: Miclaus, Antoniu <[email protected]>
> Subject: [PATCH v6 2/4] dt-bindings:iio:frequency: add admv1014 binding
>
> Add device tree bindings for the ADMV1014 Upconverter.
>
> Signed-off-by: Antoniu Miclaus <[email protected]>
Forgot to add in v6:
Reviewed-by: Rob Herring <[email protected]>
(here, not in the ABI patch, my bad)
> ---
> no changes in v6.
> .../bindings/iio/frequency/adi,admv1014.yaml | 137 ++++++++++++++++++
> 1 file changed, 137 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
>
> diff --git
> a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
> b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
> new file mode 100644
> index 000000000000..fe352c01dd94
> --- /dev/null
> +++
> b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
> @@ -0,0 +1,137 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/frequency/adi,admv1014.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ADMV1014 Microwave Downconverter
> +
> +maintainers:
> + - Antoniu Miclaus <[email protected]>
> +
> +description: |
> + Wideband, microwave downconverter optimized for point to point
> microwave
> + radio designs operating in the 24 GHz to 44 GHz frequency range.
> +
> + https://www.analog.com/en/products/admv1014.html
> +
> +properties:
> + compatible:
> + enum:
> + - adi,admv1014
> +
> + reg:
> + maxItems: 1
> +
> + spi-max-frequency:
> + maximum: 1000000
> +
> + clocks:
> + minItems: 1
> +
> + clock-names:
> + items:
> + - const: lo_in
> + description:
> + External clock that provides the Local Oscilator input.
> +
> + vcm-supply:
> + description:
> + Common-mode voltage regulator.
> +
> + vcc-if-bb-supply:
> + description:
> + BB and IF supply voltage regulator.
> +
> + vcc-vga-supply:
> + description:
> + RF Amplifier supply voltage regulator.
> +
> + vcc-vva-supply:
> + description:
> + VVA Control Circuit supply voltage regulator.
> +
> + vcc-lna-3p3-supply:
> + description:
> + Low Noise Amplifier 3.3V supply voltage regulator.
> +
> + vcc-lna-1p5-supply:
> + description:
> + Low Noise Amplifier 1.5V supply voltage regulator.
> +
> + vcc-bg-supply:
> + description:
> + Band Gap Circuit supply voltage regulator.
> +
> + vcc-quad-supply:
> + description:
> + Quadruple supply voltage regulator.
> +
> + vcc-mixer-supply:
> + description:
> + Mixer supply voltage regulator.
> +
> + adi,input-mode:
> + description:
> + Select the input mode.
> + iq - in-phase quadrature (I/Q) input
> + if - complex intermediate frequency (IF) input
> + enum: [iq, if]
> +
> + adi,detector-enable:
> + description:
> + Digital Rx Detector Enable. The Square Law Detector output is
> + available at output pin VDET.
> + type: boolean
> +
> + adi,p1db-compensation-enable:
> + description:
> + Turn on bits to optimize P1dB.
> + type: boolean
> +
> + adi,quad-se-mode:
> + description:
> + Switch the LO path from differential to single-ended operation.
> + se-neg - Single-Ended Mode, Negative Side Disabled.
> + se-pos - Single-Ended Mode, Positive Side Disabled.
> + diff - Differential Mode.
> + enum: [se-neg, se-pos, diff]
> +
> + '#clock-cells':
> + const: 0
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - vcm-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + admv1014@0{
> + compatible = "adi,admv1014";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + clocks = <&admv1014_lo>;
> + clock-names = "lo_in";
> + vcm-supply = <&vcm>;
> + vcc-if-bb-supply = <&vcc_if_bb>;
> + vcc-vga-supply = <&vcc_vga>;
> + vcc-vva-supply = <&vcc_vva>;
> + vcc-lna-3p3-supply = <&vcc_lna_3p3>;
> + vcc-lna-1p5-supply = <&vcc_lna_1p5>;
> + vcc-bg-supply = <&vcc_bg>;
> + vcc-quad-supply = <&vcc_quad>;
> + vcc-mixer-supply = <&vcc_mixer>;
> + adi,quad-se-mode = "diff";
> + adi,detector-enable;
> + adi,p1db-compensation-enable;
> + };
> + };
> +...
> --
> 2.35.1