Add gpio interrupt controller node
Signed-off-by: Qianggui Song <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index bf9ae1e1016b..6972f97e0062 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -85,6 +85,16 @@ apb4: apb4@fe000000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+ gpio_intc: interrupt-controller@4080 {
+ compatible = "amlogic,meson-s4-gpio-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x0 0x4080 0x0 0x20>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts =
+ <10 11 12 13 14 15 16 17 18 19 20 21>;
+ };
+
uart_B: serial@7a000 {
compatible = "amlogic,meson-s4-uart",
"amlogic,meson-ao-uart";
--
2.34.1
Hi,
On Thu, 10 Mar 2022 17:26:45 +0800, Qianggui Song wrote:
> Add gpio interrupt controller node
>
>
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v5.19/dt64)
[1/1] arm64: dts: meson-s4: add gpio_intc node
https://git.kernel.org/amlogic/c/393633936976fb8bd2c26ae76fa8d30822bb7fee
--
Neil