2022-04-21 12:30:42

by Michael Walle

Subject: [PATCH 1/3] MIPS: mscc: jaguar2: rename pinctrl nodes

The pinctrl device tree binding will be converted to YAML format. Rename
the pin nodes so they end with "-pins" to match the schema.

Signed-off-by: Michael Walle <[email protected]>
---
The YAML conversion patch is alread in
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel

arch/mips/boot/dts/mscc/jaguar2_pcb110.dts | 10 +++++-----
arch/mips/boot/dts/mscc/jaguar2_pcb111.dts | 10 +++++-----
arch/mips/boot/dts/mscc/jaguar2_pcb118.dts | 6 +++---
3 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
index d80cd6842b2a..0ea7bc5b5746 100644
--- a/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
+++ b/arch/mips/boot/dts/mscc/jaguar2_pcb110.dts
@@ -180,27 +180,27 @@ synce_builtin_pins: synce-builtin-pins {
pins = "GPIO_49";
function = "si";
};
- i2cmux_pins_i: i2cmux-pins-i {
+ i2cmux_pins_i: i2cmux-pins {
pins = "GPIO_17", "GPIO_18", "GPIO_20", "GPIO_21";
function = "twi_scl_m";
output-low;
};
- i2cmux_0: i2cmux-0 {
+ i2cmux_0: i2cmux-0-pins {
pins = "GPIO_17";
function = "twi_scl_m";
output-high;
};
- i2cmux_1: i2cmux-1 {
+ i2cmux_1: i2cmux-1-pins {
pins = "GPIO_18";
function = "twi_scl_m";
output-high;
};
- i2cmux_2: i2cmux-2 {
+ i2cmux_2: i2cmux-2-pins {
pins = "GPIO_20";
function = "twi_scl_m";
output-high;
};
- i2cmux_3: i2cmux-3 {
+ i2cmux_3: i2cmux-3-pins {
pins = "GPIO_21";
function = "twi_scl_m";
output-high;
diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts
index 813c5e16013c..05d8c6a96dc4 100644
--- a/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts
+++ b/arch/mips/boot/dts/mscc/jaguar2_pcb111.dts
@@ -79,27 +79,27 @@ cpld_fifo_pins: synce-builtin-pins {
};

&gpio {
- i2cmux_pins_i: i2cmux-pins-i {
+ i2cmux_pins_i: i2cmux-pins {
pins = "GPIO_17", "GPIO_18";
function = "twi_scl_m";
output-low;
};
- i2cmux_0: i2cmux-0 {
+ i2cmux_0: i2cmux-0-pins {
pins = "GPIO_17";
function = "twi_scl_m";
output-high;
};
- i2cmux_1: i2cmux-1 {
+ i2cmux_1: i2cmux-1-pins {
pins = "GPIO_18";
function = "twi_scl_m";
output-high;
};
- i2cmux_2: i2cmux-2 {
+ i2cmux_2: i2cmux-2-pins {
pins = "GPIO_20";
function = "twi_scl_m";
output-high;
};
- i2cmux_3: i2cmux-3 {
+ i2cmux_3: i2cmux-3-pins {
pins = "GPIO_21";
function = "twi_scl_m";
output-high;
diff --git a/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts b/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts
index 27c644f2d17f..cf2cf591a211 100644
--- a/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts
+++ b/arch/mips/boot/dts/mscc/jaguar2_pcb118.dts
@@ -39,17 +39,17 @@ i2c151: i2c@1 {
};

&gpio {
- i2cmux_pins_i: i2cmux-pins-i {
+ i2cmux_pins_i: i2cmux-pins {
pins = "GPIO_17", "GPIO_16";
function = "twi_scl_m";
output-low;
};
- i2cmux_0: i2cmux-0 {
+ i2cmux_0: i2cmux-0-pins {
pins = "GPIO_17";
function = "twi_scl_m";
output-high;
};
- i2cmux_1: i2cmux-1 {
+ i2cmux_1: i2cmux-1-pins {
pins = "GPIO_16";
function = "twi_scl_m";
output-high;
--
2.30.2

2022-04-27 11:28:22

by Thomas Bogendoerfer

Subject: Re: [PATCH 1/3] MIPS: mscc: jaguar2: rename pinctrl nodes

On Wed, Apr 20, 2022 at 09:50:16PM +0200, Michael Walle wrote:
> The pinctrl device tree binding will be converted to YAML format. Rename
> the pin nodes so they end with "-pins" to match the schema.
>
> Signed-off-by: Michael Walle <[email protected]>
> ---
> The YAML conversion patch is alread in
> https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel
>
> arch/mips/boot/dts/mscc/jaguar2_pcb110.dts | 10 +++++-----
> arch/mips/boot/dts/mscc/jaguar2_pcb111.dts | 10 +++++-----
> arch/mips/boot/dts/mscc/jaguar2_pcb118.dts | 6 +++---
> 3 files changed, 13 insertions(+), 13 deletions(-)

series applied to mips-next.

Thomas.

--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]