From: Sean Anderson <[email protected]>
To program fuses, it is necessary to set the fuse programming time. This
is determined based on the value of the platform clock. Add a clock
property.
Because this property is necessary for programming, it is made
mandatory. Since these bindings have not yet been present in a stable
release (though they are on track for 5.18), it is not an ABI break to
change them in this manner.
Signed-off-by: Sean Anderson <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
---
.../bindings/nvmem/fsl,layerscape-sfp.yaml | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
index b7798e903191..54086f50157d 100644
--- a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
@@ -24,15 +24,29 @@ properties:
reg:
maxItems: 1
+ clocks:
+ maxItems: 1
+ description:
+ The SFP clock. Typically, this is the platform clock divided by 4.
+
+ clock-names:
+ const: sfp
+
required:
- compatible
- reg
+ - clock-names
+ - clocks
unevaluatedProperties: false
examples:
- |
+ #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
efuse@1e80000 {
compatible = "fsl,ls1028a-sfp";
reg = <0x1e80000 0x8000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
+ clock-names = "sfp";
};
--
2.21.0