A3, A5 and most of the MSM8916 Samsung uses GPIO pin 13 for touchscreen
interrupts. Add it to common dtsi.
Signed-off-by: Lin, Meng-Bo <[email protected]>
---
.../arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi | 8 ++++++++
arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 8 --------
arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts | 8 --------
3 files changed, 8 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 9b4b7de7cec2..9c19f257cc81 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -460,6 +460,14 @@ tsp_en_default: tsp-en-default {
drive-strength = <2>;
bias-disable;
};
+
+ ts_int_default: ts-int-default {
+ pins = "gpio13";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
};
&pm8916_gpios {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index 4ba11b020f9b..bc198a2eea25 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -128,12 +128,4 @@ tkey_led_en_default: tkey-led-en-default {
drive-strength = <2>;
bias-disable;
};
-
- ts_int_default: ts-int-default {
- pins = "gpio13";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
index d978c9ac179d..7f2ab1891d91 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -69,12 +69,4 @@ tkey_en_default: tkey-en-default {
drive-strength = <2>;
bias-disable;
};
-
- ts_int_default: ts-int-default {
- pins = "gpio13";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
};
--
2.30.2