The DSD/PDM rate not only DSD64/128/256/512, which are the
multiple rate of 44.1kHz, but also support the multiple
rate of 8kHz, so can't force all mclk frequency to be
22579200Hz, need to assign the frequency according to
rate.
Fixes: aa736700f42f ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <[email protected]>
---
sound/soc/fsl/imx-card.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/sound/soc/fsl/imx-card.c b/sound/soc/fsl/imx-card.c
index 1797d777b1b8..ccc4194dc5e7 100644
--- a/sound/soc/fsl/imx-card.c
+++ b/sound/soc/fsl/imx-card.c
@@ -17,6 +17,9 @@
#include "fsl_sai.h"
+#define IMX_CARD_MCLK_22P5792MHZ 22579200
+#define IMX_CARD_MCLK_24P576MHZ 24576000
+
enum codec_type {
CODEC_DUMMY = 0,
CODEC_AK5558 = 1,
@@ -353,9 +356,14 @@ static int imx_aif_hw_params(struct snd_pcm_substream *substream,
mclk_freq = akcodec_get_mclk_rate(substream, params, slots, slot_width);
else
mclk_freq = params_rate(params) * slots * slot_width;
- /* Use the maximum freq from DSD512 (512*44100 = 22579200) */
- if (format_is_dsd(params))
- mclk_freq = 22579200;
+
+ if (format_is_dsd(params)) {
+ /* Use the maximum freq from DSD512 (512*44100 = 22579200) */
+ if (!(params_rate(params) % 11025))
+ mclk_freq = IMX_CARD_MCLK_22P5792MHZ;
+ else
+ mclk_freq = IMX_CARD_MCLK_24P576MHZ;
+ }
ret = snd_soc_dai_set_sysclk(cpu_dai, link_data->cpu_sysclk_id, mclk_freq,
SND_SOC_CLOCK_OUT);
--
2.17.1
On Wed, 6 Jul 2022 17:42:55 +0800, Shengjiu Wang wrote:
> The DSD/PDM rate not only DSD64/128/256/512, which are the
> multiple rate of 44.1kHz, but also support the multiple
> rate of 8kHz, so can't force all mclk frequency to be
> 22579200Hz, need to assign the frequency according to
> rate.
>
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: imx-card: Fix DSD/PDM mclk frequency
commit: c0fabd12a8570cb932f13d9388f3d887ad44369b
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark