Hello everyone,
sorry for this mess...
I have created two mail clusters by accident because I spotted during my
review of the patches while sending them that I forgot to recreate PATCH
3 after fixing a small issue. I then restarted git send-email with
patches 3 - 6, which didn't attach them to the previous mails :/.
Sorry again, I can send a proper version 2 once we have the first review
coming in.
Greetings,
Sebastian
On 13.07.2022 18:24, Sebastian Fricke wrote:
>Implement the HEVC codec variation for the RkVDEC driver. Currently only
>the RK3399 is supported, but it is possible to enable the RK3288 as it
>also supports this codec.
>
>Based on top of the media tree @ef7fcbbb9eabbe86d2287484bf366dd1821cc6b8
>and the HEVC uABI MR by Benjamin Gaignard.
>(https://patchwork.linuxtv.org/project/linux-media/list/?series=8360)
>
>Tested with the GStreamer V4L2 HEVC plugin:
>(https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1079)
>
>Current Fluster score:
>`Ran 131/147 tests successfully in 278.568 secs`
>with
>`python3 fluster.py run -d GStreamer-H.265-V4L2SL-Gst1.0 -ts JCT-VC-HEVC_V1 -j1`
>
>failed conformance tests:
>- DBLK_D_VIXS_2 (Success on Hantro G2)
>- DSLICE_A_HHI_5 (Success on Hantro G2)
>- EXT_A_ericsson_4 (Success on Hantro G2)
>- PICSIZE_A_Bossen_1 (Hardware limitation)
>- PICSIZE_B_Bossen_1 (Hardware limitation)
>- PICSIZE_C_Bossen_1 (Hardware limitation)
>- PICSIZE_D_Bossen_1 (Hardware limitation)
>- PPS_A_qualcomm_7 (Success on Hantro G2)
>- SAODBLK_A_MainConcept_4 (Success on Hantro G2)
>- SAODBLK_B_MainConcept_4 (Success on Hantro G2)
>- SLIST_B_Sony_9 (Success on Hantro G2)
>- SLIST_D_Sony_9 (Success on Hantro G2)
>- TSUNEQBD_A_MAIN10_Technicolor_2 (Success on Hantro G2)
>- VPSSPSPPS_A_MainConcept_1 (Success on Hantro G2)
>- WPP_D_ericsson_MAIN10_2 (Fail on Hantro G2)
>- WPP_D_ericsson_MAIN_2 (Fail on Hantro G2)
>
>Not tested with FFMpeg so far.
>
>Known issues:
>- Unable to reliably decode multiple videos concurrently
>- The SAODBLK_* tests timeout if the timeout time in fluster is lower than 120
>- Currently the uv_virstride is calculated in a manner that is hardcoded
>for the two available formats NV12 and NV15. (@config_registers)
>
>Notable design decisions:
>- I opted for a bitfield to represent the PPS memory blob as it is the
>perfect tool for that job. It describes the memory layout with any
>additional required documentation, is easy to read and a native language
>tool for that job
>- The RPS memory blob is created using a bitmap implementation, which
>uses a common Kernel API to avoid reinventing the wheel and to keep the
>code clean.
>- I deliberatly opted against the macro solution used in H264, which
>declares Macros in mid function and declares the fields of the memory
>blob as macros as well. And I would be glad to refactor the H264 code if
>desired by the maintainer to use common Kernel APIs and native language
>elements.
>- The giant static array of cabac values is moved to a separate c file,
>I did so because a separate .h file would be incorrect as it doesn't
>expose anything of any value for any other file than the rkvdec-hevc.c
>file. Other options were:
> - Calculating the values instead of storing the results (doesn't seem
> to be worth it)
> - Supply them via firmware (Adding firmware makes the whole software
> way more complicated and the usage of the driver less obvious)
>
>Ignored Checkpatch warnings (as it fits to the current style of the file):
>```
>WARNING: line length of 162 exceeds 100 columns
>#115: FILE: drivers/media/v4l2-core/v4l2-common.c:265:
>+ { .format = V4L2_PIX_FMT_NV15, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 5, 0, 0 }, .hdiv = 2, .vdiv = 2,
>
>ERROR: trailing statements should be on next line
>#128: FILE: drivers/media/v4l2-core/v4l2-ioctl.c:1305:
>+ case V4L2_PIX_FMT_NV15: descr = "10-bit Y/CbCr 4:2:0 (Packed)"; break;
>```
>
>v4l2-compliance test:
>```
>Total for rkvdec device /dev/video3: 46, Succeeded: 46, Failed: 0, Warnings: 0
>```
>
>kselftest module run for the bitmap changes:
>```
>$ sudo insmod /usr/lib/modules/5.19.0-rc3-finalseries/kernel/lib/test_bitmap.ko
>[ 71.751716] test_bitmap: parselist: 14: input is '0-2047:128/256' OK, Time: 1750
>[ 71.751787] test_bitmap: bitmap_print_to_pagebuf: input is '0-32767
>[ 71.751787] ', Time: 6708
>[ 71.760373] test_bitmap: set_value: 6/6 tests correct
>```
>
>Jonas Karlman (2):
> media: v4l2: Add NV15 pixel format
> media: v4l2-common: Add helpers to calculate bytesperline and
> sizeimage
>
>Sebastian Fricke (4):
> bitops: bitmap helper to set variable length values
> staging: media: rkvdec: Add valid pixel format check
> staging: media: rkvdec: Enable S_CTRL IOCTL
> staging: media: rkvdec: Add HEVC backend
>
> .../media/v4l/pixfmt-yuv-planar.rst | 53 +
> drivers/media/v4l2-core/v4l2-common.c | 79 +-
> drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
> drivers/staging/media/rkvdec/Makefile | 2 +-
> drivers/staging/media/rkvdec/TODO | 22 +-
> .../staging/media/rkvdec/rkvdec-hevc-data.c | 1844 +++++++++++++++++
> drivers/staging/media/rkvdec/rkvdec-hevc.c | 859 ++++++++
> drivers/staging/media/rkvdec/rkvdec-regs.h | 1 +
> drivers/staging/media/rkvdec/rkvdec.c | 182 +-
> drivers/staging/media/rkvdec/rkvdec.h | 3 +
> include/linux/bitmap.h | 39 +
> include/uapi/linux/videodev2.h | 1 +
> lib/test_bitmap.c | 47 +
> 13 files changed, 3066 insertions(+), 67 deletions(-)
> create mode 100644 drivers/staging/media/rkvdec/rkvdec-hevc-data.c
> create mode 100644 drivers/staging/media/rkvdec/rkvdec-hevc.c
>
>--
>2.25.1
>