2022-07-26 02:51:12

by Chukun Pan

Subject: [PATCH] arm64: dts: rockchip: Enable PCIe controller on rock3a

Add the nodes to enable the PCIe controller on the
Radxa ROCK3 Model A board. Run test with the MT7921
pcie wireless card.

Signed-off-by: Chukun Pan <[email protected]>
---
.../boot/dts/rockchip/rk3568-rock-3a.dts | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index 0813c0c5abde..3ce7eb05defc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -119,6 +119,18 @@ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_enable_h>;
+ regulator-name = "vcc3v3_pcie";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
};

&combphy0 {
@@ -129,6 +141,10 @@ &combphy1 {
status = "okay";
};

+&combphy2 {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
@@ -423,6 +439,14 @@ rgmii_phy1: ethernet-phy@0 {
};
};

+&pcie2x1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_reset_h>;
+ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
&pinctrl {
ethernet {
eth_phy_rst: eth_phy_rst {
@@ -436,6 +460,16 @@ led_user_en: led_user_en {
};
};

+ pcie {
+ pcie_enable_h: pcie-enable-h {
+ rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_reset_h: pcie-reset-h {
+ rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int: pmic_int {
rockchip,pins =
--
2.25.1

2022-09-09 23:41:48

by Heiko Stuebner

Subject: Re: [PATCH] arm64: dts: rockchip: Enable PCIe controller on rock3a

On Tue, 26 Jul 2022 10:35:16 +0800, Chukun Pan wrote:
> Add the nodes to enable the PCIe controller on the
> Radxa ROCK3 Model A board. Run test with the MT7921
> pcie wireless card.

Applied, thanks!

[1/1] arm64: dts: rockchip: Enable PCIe controller on rock3a
commit: 0fbbfb0b00d17ae6b6c4f04e325203de9e37837a

Best regards,
--
Heiko Stuebner <[email protected]>