From: Shravan Chippa <[email protected]>
Some platforms may not be capable of supporting the bandwidth
required for 12 bit or 3840x2160 resolutions.
Add support for dynamically selecting 10 bit and 1920x1080
resolutions while leaving the existing configuration as default
CC: Conor Dooley <[email protected]>
Signed-off-by: Prakash Battu <[email protected]>
Signed-off-by: Shravan Chippa <[email protected]>
---
drivers/media/i2c/imx334.c | 306 +++++++++++++++++++++++++++++++++----
1 file changed, 279 insertions(+), 27 deletions(-)
diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
index 062125501788..d1fa4c4d4d9e 100644
--- a/drivers/media/i2c/imx334.c
+++ b/drivers/media/i2c/imx334.c
@@ -79,7 +79,6 @@ struct imx334_reg_list {
* struct imx334_mode - imx334 sensor mode structure
* @width: Frame width
* @height: Frame height
- * @code: Format code
* @hblank: Horizontal blanking in lines
* @vblank: Vertical blanking in lines
* @vblank_min: Minimal vertical blanking in lines
@@ -91,7 +90,6 @@ struct imx334_reg_list {
struct imx334_mode {
u32 width;
u32 height;
- u32 code;
u32 hblank;
u32 vblank;
u32 vblank_min;
@@ -119,6 +117,7 @@ struct imx334_mode {
* @vblank: Vertical blanking in lines
* @cur_mode: Pointer to current selected sensor mode
* @mutex: Mutex for serializing sensor controls
+ * @cur_code: current selected format code
* @streaming: Flag indicating streaming state
*/
struct imx334 {
@@ -140,6 +139,7 @@ struct imx334 {
u32 vblank;
const struct imx334_mode *cur_mode;
struct mutex mutex;
+ u32 cur_code;
bool streaming;
};
@@ -147,6 +147,169 @@ static const s64 link_freq[] = {
IMX334_LINK_FREQ,
};
+/* Sensor mode registers */
+static const struct imx334_reg mode_1920x1080_regs[] = {
+ {0x3000, 0x01},
+ {0x3018, 0x04},
+ {0x3030, 0xCA},
+ {0x3031, 0x08},
+ {0x3032, 0x00},
+ {0x3034, 0x4C},
+ {0x3035, 0x04},
+ {0x302C, 0xF0},
+ {0x302D, 0x03},
+ {0x302E, 0x80},
+ {0x302F, 0x07},
+ {0x3074, 0xCC},
+ {0x3075, 0x02},
+ {0x308E, 0xCD},
+ {0x308F, 0x02},
+ {0x3076, 0x38},
+ {0x3077, 0x04},
+ {0x3090, 0x38},
+ {0x3091, 0x04},
+ {0x3308, 0x38},
+ {0x3309, 0x04},
+ {0x30C6, 0x00},
+ {0x30C7, 0x00},
+ {0x30CE, 0x00},
+ {0x30CF, 0x00},
+ {0x30D8, 0x18},
+ {0x30D9, 0x0A},
+ {0x304C, 0x00},
+ {0x304E, 0x00},
+ {0x304F, 0x00},
+ {0x3050, 0x00},
+ {0x30B6, 0x00},
+ {0x30B7, 0x00},
+ {0x3116, 0x08},
+ {0x3117, 0x00},
+ {0x31A0, 0x20},
+ {0x31A1, 0x0F},
+ {0x300C, 0x3B},
+ {0x300D, 0x29},
+ {0x314C, 0x29},
+ {0x314D, 0x01},
+ {0x315A, 0x0A},
+ {0x3168, 0xA0},
+ {0x316A, 0x7E},
+ {0x319E, 0x02},
+ {0x3199, 0x00},
+ {0x319D, 0x00},
+ {0x31DD, 0x03},
+ {0x3300, 0x00},
+ {0x341C, 0xFF},
+ {0x341D, 0x01},
+ {0x3A01, 0x03},
+ {0x3A18, 0x7F},
+ {0x3A19, 0x00},
+ {0x3A1A, 0x37},
+ {0x3A1B, 0x00},
+ {0x3A1C, 0x37},
+ {0x3A1D, 0x00},
+ {0x3A1E, 0xF7},
+ {0x3A1F, 0x00},
+ {0x3A20, 0x3F},
+ {0x3A21, 0x00},
+ {0x3A20, 0x6F},
+ {0x3A21, 0x00},
+ {0x3A20, 0x3F},
+ {0x3A21, 0x00},
+ {0x3A20, 0x5F},
+ {0x3A21, 0x00},
+ {0x3A20, 0x2F},
+ {0x3A21, 0x00},
+ {0x3078, 0x02},
+ {0x3079, 0x00},
+ {0x307A, 0x00},
+ {0x307B, 0x00},
+ {0x3080, 0x02},
+ {0x3081, 0x00},
+ {0x3082, 0x00},
+ {0x3083, 0x00},
+ {0x3088, 0x02},
+ {0x3094, 0x00},
+ {0x3095, 0x00},
+ {0x3096, 0x00},
+ {0x309B, 0x02},
+ {0x309C, 0x00},
+ {0x309D, 0x00},
+ {0x309E, 0x00},
+ {0x30A4, 0x00},
+ {0x30A5, 0x00},
+ {0x3288, 0x21},
+ {0x328A, 0x02},
+ {0x3414, 0x05},
+ {0x3416, 0x18},
+ {0x35AC, 0x0E},
+ {0x3648, 0x01},
+ {0x364A, 0x04},
+ {0x364C, 0x04},
+ {0x3678, 0x01},
+ {0x367C, 0x31},
+ {0x367E, 0x31},
+ {0x3708, 0x02},
+ {0x3714, 0x01},
+ {0x3715, 0x02},
+ {0x3716, 0x02},
+ {0x3717, 0x02},
+ {0x371C, 0x3D},
+ {0x371D, 0x3F},
+ {0x372C, 0x00},
+ {0x372D, 0x00},
+ {0x372E, 0x46},
+ {0x372F, 0x00},
+ {0x3730, 0x89},
+ {0x3731, 0x00},
+ {0x3732, 0x08},
+ {0x3733, 0x01},
+ {0x3734, 0xFE},
+ {0x3735, 0x05},
+ {0x375D, 0x00},
+ {0x375E, 0x00},
+ {0x375F, 0x61},
+ {0x3760, 0x06},
+ {0x3768, 0x1B},
+ {0x3769, 0x1B},
+ {0x376A, 0x1A},
+ {0x376B, 0x19},
+ {0x376C, 0x18},
+ {0x376D, 0x14},
+ {0x376E, 0x0F},
+ {0x3776, 0x00},
+ {0x3777, 0x00},
+ {0x3778, 0x46},
+ {0x3779, 0x00},
+ {0x377A, 0x08},
+ {0x377B, 0x01},
+ {0x377C, 0x45},
+ {0x377D, 0x01},
+ {0x377E, 0x23},
+ {0x377F, 0x02},
+ {0x3780, 0xD9},
+ {0x3781, 0x03},
+ {0x3782, 0xF5},
+ {0x3783, 0x06},
+ {0x3784, 0xA5},
+ {0x3788, 0x0F},
+ {0x378A, 0xD9},
+ {0x378B, 0x03},
+ {0x378C, 0xEB},
+ {0x378D, 0x05},
+ {0x378E, 0x87},
+ {0x378F, 0x06},
+ {0x3790, 0xF5},
+ {0x3792, 0x43},
+ {0x3794, 0x7A},
+ {0x3796, 0xA1},
+ {0x37B0, 0x37},
+ {0x3E04, 0x0E},
+ {0x30E8, 0x50},
+ {0x30E9, 0x00},
+ {0x3E04, 0x0E},
+ {0x3002, 0x00},
+};
+
/* Sensor mode registers */
static const struct imx334_reg mode_3840x2160_regs[] = {
{0x3000, 0x01},
@@ -243,20 +406,57 @@ static const struct imx334_reg mode_3840x2160_regs[] = {
{0x3a00, 0x01},
};
+static const struct imx334_reg raw10_framefmt_regs[] = {
+ {0x3050, 0x00},
+ {0x319D, 0x00},
+ {0x341C, 0xFF},
+ {0x341D, 0x01},
+};
+
+static const struct imx334_reg raw12_framefmt_regs[] = {
+ {0x3050, 0x01},
+ {0x319D, 0x01},
+ {0x341C, 0x47},
+ {0x341D, 0x00},
+};
+
+/*
+ * The supported BUS formats.
+ */
+static const u32 codes[] = {
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ MEDIA_BUS_FMT_SRGGB12_1X12,
+};
+
/* Supported sensor mode configurations */
-static const struct imx334_mode supported_mode = {
- .width = 3840,
- .height = 2160,
- .hblank = 560,
- .vblank = 2340,
- .vblank_min = 90,
- .vblank_max = 132840,
- .pclk = 594000000,
- .link_freq_idx = 0,
- .code = MEDIA_BUS_FMT_SRGGB12_1X12,
- .reg_list = {
- .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
- .regs = mode_3840x2160_regs,
+static const struct imx334_mode supported_modes[] = {
+ {
+ .width = 1920,
+ .height = 1080,
+ .hblank = 280,
+ .vblank = 1170,
+ .vblank_min = 90,
+ .vblank_max = 132840,
+ .pclk = 594000000,
+ .link_freq_idx = 0,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
+ .regs = mode_1920x1080_regs,
+ },
+ },
+ {
+ .width = 3840,
+ .height = 2160,
+ .hblank = 560,
+ .vblank = 2340,
+ .vblank_min = 90,
+ .vblank_max = 132840,
+ .pclk = 594000000,
+ .link_freq_idx = 0,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
+ .regs = mode_3840x2160_regs,
+ },
},
};
@@ -382,7 +582,8 @@ static int imx334_update_controls(struct imx334 *imx334,
if (ret)
return ret;
- ret = __v4l2_ctrl_s_ctrl(imx334->hblank_ctrl, mode->hblank);
+ ret = __v4l2_ctrl_modify_range(imx334->hblank_ctrl, IMX334_REG_MIN,
+ IMX334_REG_MAX, 1, mode->hblank);
if (ret)
return ret;
@@ -506,10 +707,10 @@ static int imx334_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
- if (code->index > 0)
+ if (code->index >= ARRAY_SIZE(codes))
return -EINVAL;
- code->code = supported_mode.code;
+ code->code = codes[code->index];
return 0;
}
@@ -526,15 +727,20 @@ static int imx334_enum_frame_size(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_size_enum *fsize)
{
- if (fsize->index > 0)
+ int i;
+
+ if (fsize->index >= ARRAY_SIZE(supported_modes))
return -EINVAL;
- if (fsize->code != supported_mode.code)
+ for (i = 0; i < ARRAY_SIZE(codes); i++) {
+ if (codes[i] == fsize->code)
+ break;
return -EINVAL;
+ }
- fsize->min_width = supported_mode.width;
+ fsize->min_width = supported_modes[fsize->index].width;
fsize->max_width = fsize->min_width;
- fsize->min_height = supported_mode.height;
+ fsize->min_height = supported_modes[fsize->index].height;
fsize->max_height = fsize->min_height;
return 0;
@@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct imx334 *imx334,
{
fmt->format.width = mode->width;
fmt->format.height = mode->height;
- fmt->format.code = mode->code;
+ fmt->format.code = imx334->cur_code;
fmt->format.field = V4L2_FIELD_NONE;
fmt->format.colorspace = V4L2_COLORSPACE_RAW;
fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
@@ -591,6 +797,18 @@ static int imx334_get_pad_format(struct v4l2_subdev *sd,
return 0;
}
+static int imx219_get_format_code(struct imx334 *imx334, struct v4l2_subdev_format *fmt)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(codes); i++) {
+ if (codes[i] == fmt->format.code)
+ return codes[i];
+ }
+
+ return -EINVAL;
+}
+
/**
* imx334_set_pad_format() - Set subdevice pad format
* @sd: pointer to imx334 V4L2 sub-device structure
@@ -606,10 +824,21 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,
struct imx334 *imx334 = to_imx334(sd);
const struct imx334_mode *mode;
int ret = 0;
+ u32 code;
mutex_lock(&imx334->mutex);
- mode = &supported_mode;
+ code = imx219_get_format_code(imx334, fmt);
+ if (code < 0)
+ return -EINVAL;
+
+ imx334->cur_code = code;
+
+ mode = v4l2_find_nearest_size(supported_modes,
+ ARRAY_SIZE(supported_modes),
+ width, height,
+ fmt->format.width, fmt->format.height);
+
imx334_fill_pad_format(imx334, mode, fmt);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
@@ -617,7 +846,7 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,
framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
*framefmt = fmt->format;
- } else {
+ } else if (imx334->cur_mode != mode) {
ret = imx334_update_controls(imx334, mode);
if (!ret)
imx334->cur_mode = mode;
@@ -642,11 +871,26 @@ static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
struct v4l2_subdev_format fmt = { 0 };
fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
- imx334_fill_pad_format(imx334, &supported_mode, &fmt);
+ imx334_fill_pad_format(imx334, &supported_modes[1], &fmt);
return imx334_set_pad_format(sd, sd_state, &fmt);
}
+static int imx334_set_framefmt(struct imx334 *imx334)
+{
+ switch (imx334->cur_code) {
+ case MEDIA_BUS_FMT_SRGGB10_1X10:
+ return imx334_write_regs(imx334, raw10_framefmt_regs,
+ ARRAY_SIZE(raw10_framefmt_regs));
+
+ case MEDIA_BUS_FMT_SRGGB12_1X12:
+ return imx334_write_regs(imx334, raw12_framefmt_regs,
+ ARRAY_SIZE(raw12_framefmt_regs));
+ }
+
+ return -EINVAL;
+}
+
/**
* imx334_start_streaming() - Start sensor stream
* @imx334: pointer to imx334 device
@@ -667,6 +911,13 @@ static int imx334_start_streaming(struct imx334 *imx334)
return ret;
}
+ ret = imx334_set_framefmt(imx334);
+ if (ret) {
+ dev_err(imx334->dev, "%s failed to set frame format: %d\n",
+ __func__, ret);
+ return ret;
+ }
+
/* Setup handler will write actual exposure and gain */
ret = __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler);
if (ret) {
@@ -1037,7 +1288,8 @@ static int imx334_probe(struct i2c_client *client)
}
/* Set default mode to max resolution */
- imx334->cur_mode = &supported_mode;
+ imx334->cur_mode = &supported_modes[1];
+ imx334->cur_code = codes[1];
imx334->vblank = imx334->cur_mode->vblank;
ret = imx334_init_controls(imx334);
--
2.17.1
A gentle ping!
Thanks,
Shravan.
> -----Original Message-----
> From: shravan kumar <[email protected]>
> Sent: 28 July 2022 12:01 PM
> To: [email protected]; [email protected];
> [email protected]
> Cc: [email protected]; [email protected]; shravan
> Chippa - I35088 <[email protected]>; Conor Dooley - M52691
> <[email protected]>; Battu Prakash Reddy - I30399
> <[email protected]>
> Subject: [PATCH] media: i2c: imx334: support lower bandwidth mode
>
> From: Shravan Chippa <[email protected]>
>
> Some platforms may not be capable of supporting the bandwidth required
> for 12 bit or 3840x2160 resolutions.
>
> Add support for dynamically selecting 10 bit and 1920x1080 resolutions while
> leaving the existing configuration as default
>
> CC: Conor Dooley <[email protected]>
> Signed-off-by: Prakash Battu <[email protected]>
> Signed-off-by: Shravan Chippa <[email protected]>
> ---
> drivers/media/i2c/imx334.c | 306
> +++++++++++++++++++++++++++++++++----
> 1 file changed, 279 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c index
> 062125501788..d1fa4c4d4d9e 100644
> --- a/drivers/media/i2c/imx334.c
> +++ b/drivers/media/i2c/imx334.c
> @@ -79,7 +79,6 @@ struct imx334_reg_list {
> * struct imx334_mode - imx334 sensor mode structure
> * @width: Frame width
> * @height: Frame height
> - * @code: Format code
> * @hblank: Horizontal blanking in lines
> * @vblank: Vertical blanking in lines
> * @vblank_min: Minimal vertical blanking in lines @@ -91,7 +90,6 @@ struct
> imx334_reg_list { struct imx334_mode {
> u32 width;
> u32 height;
> - u32 code;
> u32 hblank;
> u32 vblank;
> u32 vblank_min;
> @@ -119,6 +117,7 @@ struct imx334_mode {
> * @vblank: Vertical blanking in lines
> * @cur_mode: Pointer to current selected sensor mode
> * @mutex: Mutex for serializing sensor controls
> + * @cur_code: current selected format code
> * @streaming: Flag indicating streaming state
> */
> struct imx334 {
> @@ -140,6 +139,7 @@ struct imx334 {
> u32 vblank;
> const struct imx334_mode *cur_mode;
> struct mutex mutex;
> + u32 cur_code;
> bool streaming;
> };
>
> @@ -147,6 +147,169 @@ static const s64 link_freq[] = {
> IMX334_LINK_FREQ,
> };
>
> +/* Sensor mode registers */
> +static const struct imx334_reg mode_1920x1080_regs[] = {
> + {0x3000, 0x01},
> + {0x3018, 0x04},
> + {0x3030, 0xCA},
> + {0x3031, 0x08},
> + {0x3032, 0x00},
> + {0x3034, 0x4C},
> + {0x3035, 0x04},
> + {0x302C, 0xF0},
> + {0x302D, 0x03},
> + {0x302E, 0x80},
> + {0x302F, 0x07},
> + {0x3074, 0xCC},
> + {0x3075, 0x02},
> + {0x308E, 0xCD},
> + {0x308F, 0x02},
> + {0x3076, 0x38},
> + {0x3077, 0x04},
> + {0x3090, 0x38},
> + {0x3091, 0x04},
> + {0x3308, 0x38},
> + {0x3309, 0x04},
> + {0x30C6, 0x00},
> + {0x30C7, 0x00},
> + {0x30CE, 0x00},
> + {0x30CF, 0x00},
> + {0x30D8, 0x18},
> + {0x30D9, 0x0A},
> + {0x304C, 0x00},
> + {0x304E, 0x00},
> + {0x304F, 0x00},
> + {0x3050, 0x00},
> + {0x30B6, 0x00},
> + {0x30B7, 0x00},
> + {0x3116, 0x08},
> + {0x3117, 0x00},
> + {0x31A0, 0x20},
> + {0x31A1, 0x0F},
> + {0x300C, 0x3B},
> + {0x300D, 0x29},
> + {0x314C, 0x29},
> + {0x314D, 0x01},
> + {0x315A, 0x0A},
> + {0x3168, 0xA0},
> + {0x316A, 0x7E},
> + {0x319E, 0x02},
> + {0x3199, 0x00},
> + {0x319D, 0x00},
> + {0x31DD, 0x03},
> + {0x3300, 0x00},
> + {0x341C, 0xFF},
> + {0x341D, 0x01},
> + {0x3A01, 0x03},
> + {0x3A18, 0x7F},
> + {0x3A19, 0x00},
> + {0x3A1A, 0x37},
> + {0x3A1B, 0x00},
> + {0x3A1C, 0x37},
> + {0x3A1D, 0x00},
> + {0x3A1E, 0xF7},
> + {0x3A1F, 0x00},
> + {0x3A20, 0x3F},
> + {0x3A21, 0x00},
> + {0x3A20, 0x6F},
> + {0x3A21, 0x00},
> + {0x3A20, 0x3F},
> + {0x3A21, 0x00},
> + {0x3A20, 0x5F},
> + {0x3A21, 0x00},
> + {0x3A20, 0x2F},
> + {0x3A21, 0x00},
> + {0x3078, 0x02},
> + {0x3079, 0x00},
> + {0x307A, 0x00},
> + {0x307B, 0x00},
> + {0x3080, 0x02},
> + {0x3081, 0x00},
> + {0x3082, 0x00},
> + {0x3083, 0x00},
> + {0x3088, 0x02},
> + {0x3094, 0x00},
> + {0x3095, 0x00},
> + {0x3096, 0x00},
> + {0x309B, 0x02},
> + {0x309C, 0x00},
> + {0x309D, 0x00},
> + {0x309E, 0x00},
> + {0x30A4, 0x00},
> + {0x30A5, 0x00},
> + {0x3288, 0x21},
> + {0x328A, 0x02},
> + {0x3414, 0x05},
> + {0x3416, 0x18},
> + {0x35AC, 0x0E},
> + {0x3648, 0x01},
> + {0x364A, 0x04},
> + {0x364C, 0x04},
> + {0x3678, 0x01},
> + {0x367C, 0x31},
> + {0x367E, 0x31},
> + {0x3708, 0x02},
> + {0x3714, 0x01},
> + {0x3715, 0x02},
> + {0x3716, 0x02},
> + {0x3717, 0x02},
> + {0x371C, 0x3D},
> + {0x371D, 0x3F},
> + {0x372C, 0x00},
> + {0x372D, 0x00},
> + {0x372E, 0x46},
> + {0x372F, 0x00},
> + {0x3730, 0x89},
> + {0x3731, 0x00},
> + {0x3732, 0x08},
> + {0x3733, 0x01},
> + {0x3734, 0xFE},
> + {0x3735, 0x05},
> + {0x375D, 0x00},
> + {0x375E, 0x00},
> + {0x375F, 0x61},
> + {0x3760, 0x06},
> + {0x3768, 0x1B},
> + {0x3769, 0x1B},
> + {0x376A, 0x1A},
> + {0x376B, 0x19},
> + {0x376C, 0x18},
> + {0x376D, 0x14},
> + {0x376E, 0x0F},
> + {0x3776, 0x00},
> + {0x3777, 0x00},
> + {0x3778, 0x46},
> + {0x3779, 0x00},
> + {0x377A, 0x08},
> + {0x377B, 0x01},
> + {0x377C, 0x45},
> + {0x377D, 0x01},
> + {0x377E, 0x23},
> + {0x377F, 0x02},
> + {0x3780, 0xD9},
> + {0x3781, 0x03},
> + {0x3782, 0xF5},
> + {0x3783, 0x06},
> + {0x3784, 0xA5},
> + {0x3788, 0x0F},
> + {0x378A, 0xD9},
> + {0x378B, 0x03},
> + {0x378C, 0xEB},
> + {0x378D, 0x05},
> + {0x378E, 0x87},
> + {0x378F, 0x06},
> + {0x3790, 0xF5},
> + {0x3792, 0x43},
> + {0x3794, 0x7A},
> + {0x3796, 0xA1},
> + {0x37B0, 0x37},
> + {0x3E04, 0x0E},
> + {0x30E8, 0x50},
> + {0x30E9, 0x00},
> + {0x3E04, 0x0E},
> + {0x3002, 0x00},
> +};
> +
> /* Sensor mode registers */
> static const struct imx334_reg mode_3840x2160_regs[] = {
> {0x3000, 0x01},
> @@ -243,20 +406,57 @@ static const struct imx334_reg
> mode_3840x2160_regs[] = {
> {0x3a00, 0x01},
> };
>
> +static const struct imx334_reg raw10_framefmt_regs[] = {
> + {0x3050, 0x00},
> + {0x319D, 0x00},
> + {0x341C, 0xFF},
> + {0x341D, 0x01},
> +};
> +
> +static const struct imx334_reg raw12_framefmt_regs[] = {
> + {0x3050, 0x01},
> + {0x319D, 0x01},
> + {0x341C, 0x47},
> + {0x341D, 0x00},
> +};
> +
> +/*
> + * The supported BUS formats.
> + */
> +static const u32 codes[] = {
> + MEDIA_BUS_FMT_SRGGB10_1X10,
> + MEDIA_BUS_FMT_SRGGB12_1X12,
> +};
> +
> /* Supported sensor mode configurations */ -static const struct
> imx334_mode supported_mode = {
> - .width = 3840,
> - .height = 2160,
> - .hblank = 560,
> - .vblank = 2340,
> - .vblank_min = 90,
> - .vblank_max = 132840,
> - .pclk = 594000000,
> - .link_freq_idx = 0,
> - .code = MEDIA_BUS_FMT_SRGGB12_1X12,
> - .reg_list = {
> - .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> - .regs = mode_3840x2160_regs,
> +static const struct imx334_mode supported_modes[] = {
> + {
> + .width = 1920,
> + .height = 1080,
> + .hblank = 280,
> + .vblank = 1170,
> + .vblank_min = 90,
> + .vblank_max = 132840,
> + .pclk = 594000000,
> + .link_freq_idx = 0,
> + .reg_list = {
> + .num_of_regs =
> ARRAY_SIZE(mode_1920x1080_regs),
> + .regs = mode_1920x1080_regs,
> + },
> + },
> + {
> + .width = 3840,
> + .height = 2160,
> + .hblank = 560,
> + .vblank = 2340,
> + .vblank_min = 90,
> + .vblank_max = 132840,
> + .pclk = 594000000,
> + .link_freq_idx = 0,
> + .reg_list = {
> + .num_of_regs =
> ARRAY_SIZE(mode_3840x2160_regs),
> + .regs = mode_3840x2160_regs,
> + },
> },
> };
>
> @@ -382,7 +582,8 @@ static int imx334_update_controls(struct imx334
> *imx334,
> if (ret)
> return ret;
>
> - ret = __v4l2_ctrl_s_ctrl(imx334->hblank_ctrl, mode->hblank);
> + ret = __v4l2_ctrl_modify_range(imx334->hblank_ctrl,
> IMX334_REG_MIN,
> + IMX334_REG_MAX, 1, mode->hblank);
> if (ret)
> return ret;
>
> @@ -506,10 +707,10 @@ static int imx334_enum_mbus_code(struct
> v4l2_subdev *sd,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_subdev_mbus_code_enum
> *code) {
> - if (code->index > 0)
> + if (code->index >= ARRAY_SIZE(codes))
> return -EINVAL;
>
> - code->code = supported_mode.code;
> + code->code = codes[code->index];
>
> return 0;
> }
> @@ -526,15 +727,20 @@ static int imx334_enum_frame_size(struct
> v4l2_subdev *sd,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_subdev_frame_size_enum
> *fsize) {
> - if (fsize->index > 0)
> + int i;
> +
> + if (fsize->index >= ARRAY_SIZE(supported_modes))
> return -EINVAL;
>
> - if (fsize->code != supported_mode.code)
> + for (i = 0; i < ARRAY_SIZE(codes); i++) {
> + if (codes[i] == fsize->code)
> + break;
> return -EINVAL;
> + }
>
> - fsize->min_width = supported_mode.width;
> + fsize->min_width = supported_modes[fsize->index].width;
> fsize->max_width = fsize->min_width;
> - fsize->min_height = supported_mode.height;
> + fsize->min_height = supported_modes[fsize->index].height;
> fsize->max_height = fsize->min_height;
>
> return 0;
> @@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct imx334
> *imx334, {
> fmt->format.width = mode->width;
> fmt->format.height = mode->height;
> - fmt->format.code = mode->code;
> + fmt->format.code = imx334->cur_code;
> fmt->format.field = V4L2_FIELD_NONE;
> fmt->format.colorspace = V4L2_COLORSPACE_RAW;
> fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; @@ -591,6
> +797,18 @@ static int imx334_get_pad_format(struct v4l2_subdev *sd,
> return 0;
> }
>
> +static int imx219_get_format_code(struct imx334 *imx334, struct
> +v4l2_subdev_format *fmt) {
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(codes); i++) {
> + if (codes[i] == fmt->format.code)
> + return codes[i];
> + }
> +
> + return -EINVAL;
> +}
> +
> /**
> * imx334_set_pad_format() - Set subdevice pad format
> * @sd: pointer to imx334 V4L2 sub-device structure @@ -606,10 +824,21
> @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,
> struct imx334 *imx334 = to_imx334(sd);
> const struct imx334_mode *mode;
> int ret = 0;
> + u32 code;
>
> mutex_lock(&imx334->mutex);
>
> - mode = &supported_mode;
> + code = imx219_get_format_code(imx334, fmt);
> + if (code < 0)
> + return -EINVAL;
> +
> + imx334->cur_code = code;
> +
> + mode = v4l2_find_nearest_size(supported_modes,
> + ARRAY_SIZE(supported_modes),
> + width, height,
> + fmt->format.width, fmt->format.height);
> +
> imx334_fill_pad_format(imx334, mode, fmt);
>
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { @@ -617,7 +846,7
> @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,
>
> framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt-
> >pad);
> *framefmt = fmt->format;
> - } else {
> + } else if (imx334->cur_mode != mode) {
> ret = imx334_update_controls(imx334, mode);
> if (!ret)
> imx334->cur_mode = mode;
> @@ -642,11 +871,26 @@ static int imx334_init_pad_cfg(struct v4l2_subdev
> *sd,
> struct v4l2_subdev_format fmt = { 0 };
>
> fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY :
> V4L2_SUBDEV_FORMAT_ACTIVE;
> - imx334_fill_pad_format(imx334, &supported_mode, &fmt);
> + imx334_fill_pad_format(imx334, &supported_modes[1], &fmt);
>
> return imx334_set_pad_format(sd, sd_state, &fmt); }
>
> +static int imx334_set_framefmt(struct imx334 *imx334) {
> + switch (imx334->cur_code) {
> + case MEDIA_BUS_FMT_SRGGB10_1X10:
> + return imx334_write_regs(imx334, raw10_framefmt_regs,
> +
> ARRAY_SIZE(raw10_framefmt_regs));
> +
> + case MEDIA_BUS_FMT_SRGGB12_1X12:
> + return imx334_write_regs(imx334, raw12_framefmt_regs,
> +
> ARRAY_SIZE(raw12_framefmt_regs));
> + }
> +
> + return -EINVAL;
> +}
> +
> /**
> * imx334_start_streaming() - Start sensor stream
> * @imx334: pointer to imx334 device
> @@ -667,6 +911,13 @@ static int imx334_start_streaming(struct imx334
> *imx334)
> return ret;
> }
>
> + ret = imx334_set_framefmt(imx334);
> + if (ret) {
> + dev_err(imx334->dev, "%s failed to set frame format: %d\n",
> + __func__, ret);
> + return ret;
> + }
> +
> /* Setup handler will write actual exposure and gain */
> ret = __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler);
> if (ret) {
> @@ -1037,7 +1288,8 @@ static int imx334_probe(struct i2c_client *client)
> }
>
> /* Set default mode to max resolution */
> - imx334->cur_mode = &supported_mode;
> + imx334->cur_mode = &supported_modes[1];
> + imx334->cur_code = codes[1];
> imx334->vblank = imx334->cur_mode->vblank;
>
> ret = imx334_init_controls(imx334);
> --
> 2.17.1
Hello Shravan,
On Thu, Jul 28, 2022 at 12:00:44PM +0530, shravan kumar wrote:
> From: Shravan Chippa <[email protected]>
>
> Some platforms may not be capable of supporting the bandwidth
> required for 12 bit or 3840x2160 resolutions.
>
> Add support for dynamically selecting 10 bit and 1920x1080
> resolutions while leaving the existing configuration as default
>
> CC: Conor Dooley <[email protected]>
> Signed-off-by: Prakash Battu <[email protected]>
> Signed-off-by: Shravan Chippa <[email protected]>
> ---
> drivers/media/i2c/imx334.c | 306 +++++++++++++++++++++++++++++++++----
> 1 file changed, 279 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
> index 062125501788..d1fa4c4d4d9e 100644
> --- a/drivers/media/i2c/imx334.c
> +++ b/drivers/media/i2c/imx334.c
> @@ -79,7 +79,6 @@ struct imx334_reg_list {
> * struct imx334_mode - imx334 sensor mode structure
> * @width: Frame width
> * @height: Frame height
> - * @code: Format code
> * @hblank: Horizontal blanking in lines
> * @vblank: Vertical blanking in lines
> * @vblank_min: Minimal vertical blanking in lines
> @@ -91,7 +90,6 @@ struct imx334_reg_list {
> struct imx334_mode {
> u32 width;
> u32 height;
> - u32 code;
> u32 hblank;
> u32 vblank;
> u32 vblank_min;
> @@ -119,6 +117,7 @@ struct imx334_mode {
> * @vblank: Vertical blanking in lines
> * @cur_mode: Pointer to current selected sensor mode
> * @mutex: Mutex for serializing sensor controls
> + * @cur_code: current selected format code
> * @streaming: Flag indicating streaming state
> */
> struct imx334 {
> @@ -140,6 +139,7 @@ struct imx334 {
> u32 vblank;
> const struct imx334_mode *cur_mode;
> struct mutex mutex;
> + u32 cur_code;
> bool streaming;
> };
>
> @@ -147,6 +147,169 @@ static const s64 link_freq[] = {
> IMX334_LINK_FREQ,
> };
>
> +/* Sensor mode registers */
> +static const struct imx334_reg mode_1920x1080_regs[] = {
> + {0x3000, 0x01},
> + {0x3018, 0x04},
> + {0x3030, 0xCA},
> + {0x3031, 0x08},
> + {0x3032, 0x00},
> + {0x3034, 0x4C},
> + {0x3035, 0x04},
> + {0x302C, 0xF0},
> + {0x302D, 0x03},
> + {0x302E, 0x80},
> + {0x302F, 0x07},
> + {0x3074, 0xCC},
> + {0x3075, 0x02},
> + {0x308E, 0xCD},
> + {0x308F, 0x02},
> + {0x3076, 0x38},
> + {0x3077, 0x04},
> + {0x3090, 0x38},
> + {0x3091, 0x04},
> + {0x3308, 0x38},
> + {0x3309, 0x04},
> + {0x30C6, 0x00},
> + {0x30C7, 0x00},
> + {0x30CE, 0x00},
> + {0x30CF, 0x00},
> + {0x30D8, 0x18},
> + {0x30D9, 0x0A},
> + {0x304C, 0x00},
> + {0x304E, 0x00},
> + {0x304F, 0x00},
> + {0x3050, 0x00},
> + {0x30B6, 0x00},
> + {0x30B7, 0x00},
> + {0x3116, 0x08},
> + {0x3117, 0x00},
> + {0x31A0, 0x20},
> + {0x31A1, 0x0F},
> + {0x300C, 0x3B},
> + {0x300D, 0x29},
> + {0x314C, 0x29},
> + {0x314D, 0x01},
> + {0x315A, 0x0A},
> + {0x3168, 0xA0},
> + {0x316A, 0x7E},
> + {0x319E, 0x02},
> + {0x3199, 0x00},
> + {0x319D, 0x00},
> + {0x31DD, 0x03},
> + {0x3300, 0x00},
> + {0x341C, 0xFF},
> + {0x341D, 0x01},
> + {0x3A01, 0x03},
> + {0x3A18, 0x7F},
> + {0x3A19, 0x00},
> + {0x3A1A, 0x37},
> + {0x3A1B, 0x00},
> + {0x3A1C, 0x37},
> + {0x3A1D, 0x00},
> + {0x3A1E, 0xF7},
> + {0x3A1F, 0x00},
> + {0x3A20, 0x3F},
> + {0x3A21, 0x00},
> + {0x3A20, 0x6F},
> + {0x3A21, 0x00},
> + {0x3A20, 0x3F},
> + {0x3A21, 0x00},
> + {0x3A20, 0x5F},
> + {0x3A21, 0x00},
> + {0x3A20, 0x2F},
> + {0x3A21, 0x00},
> + {0x3078, 0x02},
> + {0x3079, 0x00},
> + {0x307A, 0x00},
> + {0x307B, 0x00},
> + {0x3080, 0x02},
> + {0x3081, 0x00},
> + {0x3082, 0x00},
> + {0x3083, 0x00},
> + {0x3088, 0x02},
> + {0x3094, 0x00},
> + {0x3095, 0x00},
> + {0x3096, 0x00},
> + {0x309B, 0x02},
> + {0x309C, 0x00},
> + {0x309D, 0x00},
> + {0x309E, 0x00},
> + {0x30A4, 0x00},
> + {0x30A5, 0x00},
> + {0x3288, 0x21},
> + {0x328A, 0x02},
> + {0x3414, 0x05},
> + {0x3416, 0x18},
> + {0x35AC, 0x0E},
> + {0x3648, 0x01},
> + {0x364A, 0x04},
> + {0x364C, 0x04},
> + {0x3678, 0x01},
> + {0x367C, 0x31},
> + {0x367E, 0x31},
> + {0x3708, 0x02},
> + {0x3714, 0x01},
> + {0x3715, 0x02},
> + {0x3716, 0x02},
> + {0x3717, 0x02},
> + {0x371C, 0x3D},
> + {0x371D, 0x3F},
> + {0x372C, 0x00},
> + {0x372D, 0x00},
> + {0x372E, 0x46},
> + {0x372F, 0x00},
> + {0x3730, 0x89},
> + {0x3731, 0x00},
> + {0x3732, 0x08},
> + {0x3733, 0x01},
> + {0x3734, 0xFE},
> + {0x3735, 0x05},
> + {0x375D, 0x00},
> + {0x375E, 0x00},
> + {0x375F, 0x61},
> + {0x3760, 0x06},
> + {0x3768, 0x1B},
> + {0x3769, 0x1B},
> + {0x376A, 0x1A},
> + {0x376B, 0x19},
> + {0x376C, 0x18},
> + {0x376D, 0x14},
> + {0x376E, 0x0F},
> + {0x3776, 0x00},
> + {0x3777, 0x00},
> + {0x3778, 0x46},
> + {0x3779, 0x00},
> + {0x377A, 0x08},
> + {0x377B, 0x01},
> + {0x377C, 0x45},
> + {0x377D, 0x01},
> + {0x377E, 0x23},
> + {0x377F, 0x02},
> + {0x3780, 0xD9},
> + {0x3781, 0x03},
> + {0x3782, 0xF5},
> + {0x3783, 0x06},
> + {0x3784, 0xA5},
> + {0x3788, 0x0F},
> + {0x378A, 0xD9},
> + {0x378B, 0x03},
> + {0x378C, 0xEB},
> + {0x378D, 0x05},
> + {0x378E, 0x87},
> + {0x378F, 0x06},
> + {0x3790, 0xF5},
> + {0x3792, 0x43},
> + {0x3794, 0x7A},
> + {0x3796, 0xA1},
> + {0x37B0, 0x37},
> + {0x3E04, 0x0E},
> + {0x30E8, 0x50},
> + {0x30E9, 0x00},
> + {0x3E04, 0x0E},
> + {0x3002, 0x00},
> +};
> +
> /* Sensor mode registers */
> static const struct imx334_reg mode_3840x2160_regs[] = {
> {0x3000, 0x01},
> @@ -243,20 +406,57 @@ static const struct imx334_reg mode_3840x2160_regs[] = {
> {0x3a00, 0x01},
> };
>
> +static const struct imx334_reg raw10_framefmt_regs[] = {
> + {0x3050, 0x00},
> + {0x319D, 0x00},
> + {0x341C, 0xFF},
> + {0x341D, 0x01},
> +};
> +
> +static const struct imx334_reg raw12_framefmt_regs[] = {
> + {0x3050, 0x01},
> + {0x319D, 0x01},
> + {0x341C, 0x47},
> + {0x341D, 0x00},
> +};
> +
> +/*
>
> + */
> +static const u32 codes[] = {
Just "codes" is a little vague ? What about imx334_mbus_codes[] ?
> + MEDIA_BUS_FMT_SRGGB10_1X10,
> + MEDIA_BUS_FMT_SRGGB12_1X12,
> +};
> +
> /* Supported sensor mode configurations */
> -static const struct imx334_mode supported_mode = {
> - .width = 3840,
> - .height = 2160,
> - .hblank = 560,
> - .vblank = 2340,
> - .vblank_min = 90,
> - .vblank_max = 132840,
> - .pclk = 594000000,
> - .link_freq_idx = 0,
> - .code = MEDIA_BUS_FMT_SRGGB12_1X12,
> - .reg_list = {
> - .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> - .regs = mode_3840x2160_regs,
> +static const struct imx334_mode supported_modes[] = {
> + {
> + .width = 1920,
> + .height = 1080,
> + .hblank = 280,
> + .vblank = 1170,
> + .vblank_min = 90,
> + .vblank_max = 132840,
> + .pclk = 594000000,
> + .link_freq_idx = 0,
> + .reg_list = {
> + .num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
> + .regs = mode_1920x1080_regs,
> + },
> + },
> + {
> + .width = 3840,
> + .height = 2160,
> + .hblank = 560,
> + .vblank = 2340,
> + .vblank_min = 90,
> + .vblank_max = 132840,
> + .pclk = 594000000,
> + .link_freq_idx = 0,
> + .reg_list = {
> + .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> + .regs = mode_3840x2160_regs,
> + },
Nit: I would keep the existing formats and code in position [0] so
that if additional modes are added the defaults can be kept in [0]. Also
I usually see drivers listing larger modes first, but that might not
be a strict rule.
> },
> };
>
> @@ -382,7 +582,8 @@ static int imx334_update_controls(struct imx334 *imx334,
> if (ret)
> return ret;
>
> - ret = __v4l2_ctrl_s_ctrl(imx334->hblank_ctrl, mode->hblank);
> + ret = __v4l2_ctrl_modify_range(imx334->hblank_ctrl, IMX334_REG_MIN,
> + IMX334_REG_MAX, 1, mode->hblank);
I might have missed why is this change related
> if (ret)
> return ret;
>
> @@ -506,10 +707,10 @@ static int imx334_enum_mbus_code(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_subdev_mbus_code_enum *code)
> {
> - if (code->index > 0)
> + if (code->index >= ARRAY_SIZE(codes))
> return -EINVAL;
>
> - code->code = supported_mode.code;
> + code->code = codes[code->index];
>
> return 0;
> }
> @@ -526,15 +727,20 @@ static int imx334_enum_frame_size(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_subdev_frame_size_enum *fsize)
> {
> - if (fsize->index > 0)
> + int i;
> +
> + if (fsize->index >= ARRAY_SIZE(supported_modes))
> return -EINVAL;
>
> - if (fsize->code != supported_mode.code)
> + for (i = 0; i < ARRAY_SIZE(codes); i++) {
Can we use for (unsigned int i = 0; ... ) now that C99 has been
adopted ?
> + if (codes[i] == fsize->code)
> + break;
> return -EINVAL;
Are you sure this is right ?
If the format code in fsize->code is == codes[1] you will return
-EINVAL ?
Does the sensor support more formats than MEDIA_BUS_FMT_SRGGB10_1X10
and MEDIA_BUS_FMT_SRGGB12_1X12 ? Because otherwise you could replace
the for loop with a simple check.
However support for flip might change the bayer pattern, so it's
better to keep the loop maybe.
What about centrlize it like you're doing in imx219_get_format_code()
and use it here ? You can place the helper just after the supported
mbus codes declaration maybe ?
> + }
>
> - fsize->min_width = supported_mode.width;
> + fsize->min_width = supported_modes[fsize->index].width;
> fsize->max_width = fsize->min_width;
> - fsize->min_height = supported_mode.height;
> + fsize->min_height = supported_modes[fsize->index].height;
> fsize->max_height = fsize->min_height;
>
> return 0;
> @@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct imx334 *imx334,
> {
> fmt->format.width = mode->width;
> fmt->format.height = mode->height;
> - fmt->format.code = mode->code;
> + fmt->format.code = imx334->cur_code;
> fmt->format.field = V4L2_FIELD_NONE;
> fmt->format.colorspace = V4L2_COLORSPACE_RAW;
> fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> @@ -591,6 +797,18 @@ static int imx334_get_pad_format(struct v4l2_subdev *sd,
> return 0;
> }
>
> +static int imx219_get_format_code(struct imx334 *imx334, struct v4l2_subdev_format *fmt)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(codes); i++) {
Ditto, unsigned int and possibily declared inside the for loop
> + if (codes[i] == fmt->format.code)
> + return codes[i];
> + }
> +
> + return -EINVAL;
> +}
> +
> /**
> * imx334_set_pad_format() - Set subdevice pad format
> * @sd: pointer to imx334 V4L2 sub-device structure
> @@ -606,10 +824,21 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,
> struct imx334 *imx334 = to_imx334(sd);
> const struct imx334_mode *mode;
> int ret = 0;
> + u32 code;
>
> mutex_lock(&imx334->mutex);
>
> - mode = &supported_mode;
> + code = imx219_get_format_code(imx334, fmt);
> + if (code < 0)
> + return -EINVAL;
> +
> + imx334->cur_code = code;
> +
> + mode = v4l2_find_nearest_size(supported_modes,
> + ARRAY_SIZE(supported_modes),
> + width, height,
> + fmt->format.width, fmt->format.height);
> +
> imx334_fill_pad_format(imx334, mode, fmt);
>
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> @@ -617,7 +846,7 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,
>
> framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> *framefmt = fmt->format;
> - } else {
> + } else if (imx334->cur_mode != mode) {
Is this change related ? I think it's good as it avoids an unecessary
update of the controls, but maybe it's not related to this patch ?
Thanks
j
> ret = imx334_update_controls(imx334, mode);
> if (!ret)
> imx334->cur_mode = mode;
> @@ -642,11 +871,26 @@ static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
> struct v4l2_subdev_format fmt = { 0 };
>
> fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> - imx334_fill_pad_format(imx334, &supported_mode, &fmt);
> + imx334_fill_pad_format(imx334, &supported_modes[1], &fmt);
>
> return imx334_set_pad_format(sd, sd_state, &fmt);
> }
>
> +static int imx334_set_framefmt(struct imx334 *imx334)
> +{
> + switch (imx334->cur_code) {
> + case MEDIA_BUS_FMT_SRGGB10_1X10:
> + return imx334_write_regs(imx334, raw10_framefmt_regs,
> + ARRAY_SIZE(raw10_framefmt_regs));
> +
> + case MEDIA_BUS_FMT_SRGGB12_1X12:
> + return imx334_write_regs(imx334, raw12_framefmt_regs,
> + ARRAY_SIZE(raw12_framefmt_regs));
> + }
> +
> + return -EINVAL;
> +}
> +
> /**
> * imx334_start_streaming() - Start sensor stream
> * @imx334: pointer to imx334 device
> @@ -667,6 +911,13 @@ static int imx334_start_streaming(struct imx334 *imx334)
> return ret;
> }
>
> + ret = imx334_set_framefmt(imx334);
> + if (ret) {
> + dev_err(imx334->dev, "%s failed to set frame format: %d\n",
> + __func__, ret);
> + return ret;
> + }
> +
> /* Setup handler will write actual exposure and gain */
> ret = __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler);
> if (ret) {
> @@ -1037,7 +1288,8 @@ static int imx334_probe(struct i2c_client *client)
> }
>
> /* Set default mode to max resolution */
> - imx334->cur_mode = &supported_mode;
> + imx334->cur_mode = &supported_modes[1];
> + imx334->cur_code = codes[1];
> imx334->vblank = imx334->cur_mode->vblank;
>
> ret = imx334_init_controls(imx334);
> --
> 2.17.1
>
> -----Original Message-----
> From: Jacopo Mondi <[email protected]>
> Sent: 22 August 2022 09:23 PM
> To: shravan Chippa - I35088 <[email protected]>
> Cc: [email protected]; [email protected];
> [email protected]; [email protected]; linux-
> [email protected]; Conor Dooley - M52691
> <[email protected]>; Battu Prakash Reddy - I30399
> <[email protected]>
> Subject: Re: [PATCH] media: i2c: imx334: support lower bandwidth mode
>
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
>
> Hello Shravan,
>
> On Thu, Jul 28, 2022 at 12:00:44PM +0530, shravan kumar wrote:
> > From: Shravan Chippa <[email protected]>
> >
> > Some platforms may not be capable of supporting the bandwidth required
> > for 12 bit or 3840x2160 resolutions.
> >
> > Add support for dynamically selecting 10 bit and 1920x1080 resolutions
> > while leaving the existing configuration as default
> >
> > CC: Conor Dooley <[email protected]>
> > Signed-off-by: Prakash Battu <[email protected]>
> > Signed-off-by: Shravan Chippa <[email protected]>
> > ---
> > drivers/media/i2c/imx334.c | 306
> > +++++++++++++++++++++++++++++++++----
> > 1 file changed, 279 insertions(+), 27 deletions(-)
> >
> > diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
> > index 062125501788..d1fa4c4d4d9e 100644
> > --- a/drivers/media/i2c/imx334.c
> > +++ b/drivers/media/i2c/imx334.c
> > @@ -79,7 +79,6 @@ struct imx334_reg_list {
> > * struct imx334_mode - imx334 sensor mode structure
> > * @width: Frame width
> > * @height: Frame height
> > - * @code: Format code
> > * @hblank: Horizontal blanking in lines
> > * @vblank: Vertical blanking in lines
> > * @vblank_min: Minimal vertical blanking in lines @@ -91,7 +90,6 @@
> > struct imx334_reg_list { struct imx334_mode {
> > u32 width;
> > u32 height;
> > - u32 code;
> > u32 hblank;
> > u32 vblank;
> > u32 vblank_min;
> > @@ -119,6 +117,7 @@ struct imx334_mode {
> > * @vblank: Vertical blanking in lines
> > * @cur_mode: Pointer to current selected sensor mode
> > * @mutex: Mutex for serializing sensor controls
> > + * @cur_code: current selected format code
> > * @streaming: Flag indicating streaming state
> > */
> > struct imx334 {
> > @@ -140,6 +139,7 @@ struct imx334 {
> > u32 vblank;
> > const struct imx334_mode *cur_mode;
> > struct mutex mutex;
> > + u32 cur_code;
> > bool streaming;
> > };
> >
> > @@ -147,6 +147,169 @@ static const s64 link_freq[] = {
> > IMX334_LINK_FREQ,
> > };
> >
> > +/* Sensor mode registers */
> > +static const struct imx334_reg mode_1920x1080_regs[] = {
> > + {0x3000, 0x01},
> > + {0x3018, 0x04},
> > + {0x3030, 0xCA},
> > + {0x3031, 0x08},
> > + {0x3032, 0x00},
> > + {0x3034, 0x4C},
> > + {0x3035, 0x04},
> > + {0x302C, 0xF0},
> > + {0x302D, 0x03},
> > + {0x302E, 0x80},
> > + {0x302F, 0x07},
> > + {0x3074, 0xCC},
> > + {0x3075, 0x02},
> > + {0x308E, 0xCD},
> > + {0x308F, 0x02},
> > + {0x3076, 0x38},
> > + {0x3077, 0x04},
> > + {0x3090, 0x38},
> > + {0x3091, 0x04},
> > + {0x3308, 0x38},
> > + {0x3309, 0x04},
> > + {0x30C6, 0x00},
> > + {0x30C7, 0x00},
> > + {0x30CE, 0x00},
> > + {0x30CF, 0x00},
> > + {0x30D8, 0x18},
> > + {0x30D9, 0x0A},
> > + {0x304C, 0x00},
> > + {0x304E, 0x00},
> > + {0x304F, 0x00},
> > + {0x3050, 0x00},
> > + {0x30B6, 0x00},
> > + {0x30B7, 0x00},
> > + {0x3116, 0x08},
> > + {0x3117, 0x00},
> > + {0x31A0, 0x20},
> > + {0x31A1, 0x0F},
> > + {0x300C, 0x3B},
> > + {0x300D, 0x29},
> > + {0x314C, 0x29},
> > + {0x314D, 0x01},
> > + {0x315A, 0x0A},
> > + {0x3168, 0xA0},
> > + {0x316A, 0x7E},
> > + {0x319E, 0x02},
> > + {0x3199, 0x00},
> > + {0x319D, 0x00},
> > + {0x31DD, 0x03},
> > + {0x3300, 0x00},
> > + {0x341C, 0xFF},
> > + {0x341D, 0x01},
> > + {0x3A01, 0x03},
> > + {0x3A18, 0x7F},
> > + {0x3A19, 0x00},
> > + {0x3A1A, 0x37},
> > + {0x3A1B, 0x00},
> > + {0x3A1C, 0x37},
> > + {0x3A1D, 0x00},
> > + {0x3A1E, 0xF7},
> > + {0x3A1F, 0x00},
> > + {0x3A20, 0x3F},
> > + {0x3A21, 0x00},
> > + {0x3A20, 0x6F},
> > + {0x3A21, 0x00},
> > + {0x3A20, 0x3F},
> > + {0x3A21, 0x00},
> > + {0x3A20, 0x5F},
> > + {0x3A21, 0x00},
> > + {0x3A20, 0x2F},
> > + {0x3A21, 0x00},
> > + {0x3078, 0x02},
> > + {0x3079, 0x00},
> > + {0x307A, 0x00},
> > + {0x307B, 0x00},
> > + {0x3080, 0x02},
> > + {0x3081, 0x00},
> > + {0x3082, 0x00},
> > + {0x3083, 0x00},
> > + {0x3088, 0x02},
> > + {0x3094, 0x00},
> > + {0x3095, 0x00},
> > + {0x3096, 0x00},
> > + {0x309B, 0x02},
> > + {0x309C, 0x00},
> > + {0x309D, 0x00},
> > + {0x309E, 0x00},
> > + {0x30A4, 0x00},
> > + {0x30A5, 0x00},
> > + {0x3288, 0x21},
> > + {0x328A, 0x02},
> > + {0x3414, 0x05},
> > + {0x3416, 0x18},
> > + {0x35AC, 0x0E},
> > + {0x3648, 0x01},
> > + {0x364A, 0x04},
> > + {0x364C, 0x04},
> > + {0x3678, 0x01},
> > + {0x367C, 0x31},
> > + {0x367E, 0x31},
> > + {0x3708, 0x02},
> > + {0x3714, 0x01},
> > + {0x3715, 0x02},
> > + {0x3716, 0x02},
> > + {0x3717, 0x02},
> > + {0x371C, 0x3D},
> > + {0x371D, 0x3F},
> > + {0x372C, 0x00},
> > + {0x372D, 0x00},
> > + {0x372E, 0x46},
> > + {0x372F, 0x00},
> > + {0x3730, 0x89},
> > + {0x3731, 0x00},
> > + {0x3732, 0x08},
> > + {0x3733, 0x01},
> > + {0x3734, 0xFE},
> > + {0x3735, 0x05},
> > + {0x375D, 0x00},
> > + {0x375E, 0x00},
> > + {0x375F, 0x61},
> > + {0x3760, 0x06},
> > + {0x3768, 0x1B},
> > + {0x3769, 0x1B},
> > + {0x376A, 0x1A},
> > + {0x376B, 0x19},
> > + {0x376C, 0x18},
> > + {0x376D, 0x14},
> > + {0x376E, 0x0F},
> > + {0x3776, 0x00},
> > + {0x3777, 0x00},
> > + {0x3778, 0x46},
> > + {0x3779, 0x00},
> > + {0x377A, 0x08},
> > + {0x377B, 0x01},
> > + {0x377C, 0x45},
> > + {0x377D, 0x01},
> > + {0x377E, 0x23},
> > + {0x377F, 0x02},
> > + {0x3780, 0xD9},
> > + {0x3781, 0x03},
> > + {0x3782, 0xF5},
> > + {0x3783, 0x06},
> > + {0x3784, 0xA5},
> > + {0x3788, 0x0F},
> > + {0x378A, 0xD9},
> > + {0x378B, 0x03},
> > + {0x378C, 0xEB},
> > + {0x378D, 0x05},
> > + {0x378E, 0x87},
> > + {0x378F, 0x06},
> > + {0x3790, 0xF5},
> > + {0x3792, 0x43},
> > + {0x3794, 0x7A},
> > + {0x3796, 0xA1},
> > + {0x37B0, 0x37},
> > + {0x3E04, 0x0E},
> > + {0x30E8, 0x50},
> > + {0x30E9, 0x00},
> > + {0x3E04, 0x0E},
> > + {0x3002, 0x00},
> > +};
> > +
> > /* Sensor mode registers */
> > static const struct imx334_reg mode_3840x2160_regs[] = {
> > {0x3000, 0x01},
> > @@ -243,20 +406,57 @@ static const struct imx334_reg
> mode_3840x2160_regs[] = {
> > {0x3a00, 0x01},
> > };
> >
> > +static const struct imx334_reg raw10_framefmt_regs[] = {
> > + {0x3050, 0x00},
> > + {0x319D, 0x00},
> > + {0x341C, 0xFF},
> > + {0x341D, 0x01},
> > +};
> > +
> > +static const struct imx334_reg raw12_framefmt_regs[] = {
> > + {0x3050, 0x01},
> > + {0x319D, 0x01},
> > + {0x341C, 0x47},
> > + {0x341D, 0x00},
> > +};
> > +
> > +/*
> >
> > + */
> > +static const u32 codes[] = {
>
> Just "codes" is a little vague ? What about imx334_mbus_codes[] ?
>
> > + MEDIA_BUS_FMT_SRGGB10_1X10,
> > + MEDIA_BUS_FMT_SRGGB12_1X12,
> > +};
> > +
> > /* Supported sensor mode configurations */ -static const struct
> > imx334_mode supported_mode = {
> > - .width = 3840,
> > - .height = 2160,
> > - .hblank = 560,
> > - .vblank = 2340,
> > - .vblank_min = 90,
> > - .vblank_max = 132840,
> > - .pclk = 594000000,
> > - .link_freq_idx = 0,
> > - .code = MEDIA_BUS_FMT_SRGGB12_1X12,
> > - .reg_list = {
> > - .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> > - .regs = mode_3840x2160_regs,
> > +static const struct imx334_mode supported_modes[] = {
> > + {
> > + .width = 1920,
> > + .height = 1080,
> > + .hblank = 280,
> > + .vblank = 1170,
> > + .vblank_min = 90,
> > + .vblank_max = 132840,
> > + .pclk = 594000000,
> > + .link_freq_idx = 0,
> > + .reg_list = {
> > + .num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
> > + .regs = mode_1920x1080_regs,
> > + },
> > + },
> > + {
> > + .width = 3840,
> > + .height = 2160,
> > + .hblank = 560,
> > + .vblank = 2340,
> > + .vblank_min = 90,
> > + .vblank_max = 132840,
> > + .pclk = 594000000,
> > + .link_freq_idx = 0,
> > + .reg_list = {
> > + .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> > + .regs = mode_3840x2160_regs,
> > + },
>
> Nit: I would keep the existing formats and code in position [0] so that if
> additional modes are added the defaults can be kept in [0]. Also I usually see
> drivers listing larger modes first, but that might not be a strict rule.
>
> > },
> > };
> >
> > @@ -382,7 +582,8 @@ static int imx334_update_controls(struct imx334
> *imx334,
> > if (ret)
> > return ret;
> >
> > - ret = __v4l2_ctrl_s_ctrl(imx334->hblank_ctrl, mode->hblank);
> > + ret = __v4l2_ctrl_modify_range(imx334->hblank_ctrl,
> IMX334_REG_MIN,
> > + IMX334_REG_MAX, 1, mode->hblank);
>
> I might have missed why is this change related
Hblank is readonly variable.
If I use __v4l2_ctrl_s_ctrl function update return error.
>
> > if (ret)
> > return ret;
> >
> > @@ -506,10 +707,10 @@ static int imx334_enum_mbus_code(struct
> v4l2_subdev *sd,
> > struct v4l2_subdev_state *sd_state,
> > struct v4l2_subdev_mbus_code_enum
> > *code) {
> > - if (code->index > 0)
> > + if (code->index >= ARRAY_SIZE(codes))
> > return -EINVAL;
> >
> > - code->code = supported_mode.code;
> > + code->code = codes[code->index];
> >
> > return 0;
> > }
> > @@ -526,15 +727,20 @@ static int imx334_enum_frame_size(struct
> v4l2_subdev *sd,
> > struct v4l2_subdev_state *sd_state,
> > struct v4l2_subdev_frame_size_enum
> > *fsize) {
> > - if (fsize->index > 0)
> > + int i;
> > +
> > + if (fsize->index >= ARRAY_SIZE(supported_modes))
> > return -EINVAL;
> >
> > - if (fsize->code != supported_mode.code)
> > + for (i = 0; i < ARRAY_SIZE(codes); i++) {
>
> Can we use for (unsigned int i = 0; ... ) now that C99 has been adopted ?
C99 might be adopted.
But I have not observered no one is started using.
>
> > + if (codes[i] == fsize->code)
> > + break;
> > return -EINVAL;
>
> Are you sure this is right ?
> If the format code in fsize->code is == codes[1] you will return -EINVAL ?
I think this will break the for loop, if fsize->code is == codes[1]
>
> Does the sensor support more formats than
> MEDIA_BUS_FMT_SRGGB10_1X10 and MEDIA_BUS_FMT_SRGGB12_1X12 ?
> Because otherwise you could replace the for loop with a simple check.
>
> However support for flip might change the bayer pattern, so it's better to
> keep the loop maybe.
>
> What about centrlize it like you're doing in imx219_get_format_code() and
> use it here ? You can place the helper just after the supported mbus codes
> declaration maybe ?
>
Yes, it is good. But imx334 do not have direct register to do VFLIP.
>
> > + }
> >
> > - fsize->min_width = supported_mode.width;
> > + fsize->min_width = supported_modes[fsize->index].width;
> > fsize->max_width = fsize->min_width;
> > - fsize->min_height = supported_mode.height;
> > + fsize->min_height = supported_modes[fsize->index].height;
> > fsize->max_height = fsize->min_height;
> >
> > return 0;
> > @@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct imx334
> > *imx334, {
> > fmt->format.width = mode->width;
> > fmt->format.height = mode->height;
> > - fmt->format.code = mode->code;
> > + fmt->format.code = imx334->cur_code;
> > fmt->format.field = V4L2_FIELD_NONE;
> > fmt->format.colorspace = V4L2_COLORSPACE_RAW;
> > fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; @@ -591,6
> > +797,18 @@ static int imx334_get_pad_format(struct v4l2_subdev *sd,
> > return 0;
> > }
> >
> > +static int imx219_get_format_code(struct imx334 *imx334, struct
> > +v4l2_subdev_format *fmt) {
> > + int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(codes); i++) {
>
> Ditto, unsigned int and possibily declared inside the for loop
>
> > + if (codes[i] == fmt->format.code)
> > + return codes[i];
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > /**
> > * imx334_set_pad_format() - Set subdevice pad format
> > * @sd: pointer to imx334 V4L2 sub-device structure @@ -606,10
> > +824,21 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,
> > struct imx334 *imx334 = to_imx334(sd);
> > const struct imx334_mode *mode;
> > int ret = 0;
> > + u32 code;
> >
> > mutex_lock(&imx334->mutex);
> >
> > - mode = &supported_mode;
> > + code = imx219_get_format_code(imx334, fmt);
> > + if (code < 0)
> > + return -EINVAL;
> > +
> > + imx334->cur_code = code;
> > +
> > + mode = v4l2_find_nearest_size(supported_modes,
> > + ARRAY_SIZE(supported_modes),
> > + width, height,
> > + fmt->format.width,
> > + fmt->format.height);
> > +
> > imx334_fill_pad_format(imx334, mode, fmt);
> >
> > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { @@ -617,7 +846,7
> @@
> > static int imx334_set_pad_format(struct v4l2_subdev *sd,
> >
> > framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> > *framefmt = fmt->format;
> > - } else {
> > + } else if (imx334->cur_mode != mode) {
>
> Is this change related ? I think it's good as it avoids an unecessary update of
> the controls, but maybe it's not related to this patch ?
I have updated mode[] array new set of value,
Insated of calling functions simply.
Just added a check the the mode changed then only we need to updated other parameters
Same as imx219 code
Thanks,
Shravan
>
> Thanks
> j
>
> > ret = imx334_update_controls(imx334, mode);
> > if (!ret)
> > imx334->cur_mode = mode; @@ -642,11 +871,26 @@
> > static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
> > struct v4l2_subdev_format fmt = { 0 };
> >
> > fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY :
> V4L2_SUBDEV_FORMAT_ACTIVE;
> > - imx334_fill_pad_format(imx334, &supported_mode, &fmt);
> > + imx334_fill_pad_format(imx334, &supported_modes[1], &fmt);
> >
> > return imx334_set_pad_format(sd, sd_state, &fmt); }
> >
> > +static int imx334_set_framefmt(struct imx334 *imx334) {
> > + switch (imx334->cur_code) {
> > + case MEDIA_BUS_FMT_SRGGB10_1X10:
> > + return imx334_write_regs(imx334, raw10_framefmt_regs,
> > +
> > +ARRAY_SIZE(raw10_framefmt_regs));
> > +
> > + case MEDIA_BUS_FMT_SRGGB12_1X12:
> > + return imx334_write_regs(imx334, raw12_framefmt_regs,
> > + ARRAY_SIZE(raw12_framefmt_regs));
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > /**
> > * imx334_start_streaming() - Start sensor stream
> > * @imx334: pointer to imx334 device
> > @@ -667,6 +911,13 @@ static int imx334_start_streaming(struct imx334
> *imx334)
> > return ret;
> > }
> >
> > + ret = imx334_set_framefmt(imx334);
> > + if (ret) {
> > + dev_err(imx334->dev, "%s failed to set frame format: %d\n",
> > + __func__, ret);
> > + return ret;
> > + }
> > +
> > /* Setup handler will write actual exposure and gain */
> > ret = __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler);
> > if (ret) {
> > @@ -1037,7 +1288,8 @@ static int imx334_probe(struct i2c_client *client)
> > }
> >
> > /* Set default mode to max resolution */
> > - imx334->cur_mode = &supported_mode;
> > + imx334->cur_mode = &supported_modes[1];
> > + imx334->cur_code = codes[1];
> > imx334->vblank = imx334->cur_mode->vblank;
> >
> > ret = imx334_init_controls(imx334);
> > --
> > 2.17.1
> >
Hi Shravan
On Thu, Aug 25, 2022 at 07:16:22AM +0000, [email protected] wrote:
>
>
> > -----Original Message-----
> > From: Jacopo Mondi <[email protected]>
> > Sent: 22 August 2022 09:23 PM
> > To: shravan Chippa - I35088 <[email protected]>
> > Cc: [email protected]; [email protected];
> > [email protected]; [email protected]; linux-
> > [email protected]; Conor Dooley - M52691
> > <[email protected]>; Battu Prakash Reddy - I30399
> > <[email protected]>
> > Subject: Re: [PATCH] media: i2c: imx334: support lower bandwidth mode
> >
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> > content is safe
> >
> > Hello Shravan,
> >
> > On Thu, Jul 28, 2022 at 12:00:44PM +0530, shravan kumar wrote:
> > > From: Shravan Chippa <[email protected]>
> > >
> > > Some platforms may not be capable of supporting the bandwidth required
> > > for 12 bit or 3840x2160 resolutions.
> > >
> > > Add support for dynamically selecting 10 bit and 1920x1080 resolutions
> > > while leaving the existing configuration as default
> > >
> > > CC: Conor Dooley <[email protected]>
> > > Signed-off-by: Prakash Battu <[email protected]>
> > > Signed-off-by: Shravan Chippa <[email protected]>
> > > ---
> > > drivers/media/i2c/imx334.c | 306
> > > +++++++++++++++++++++++++++++++++----
> > > 1 file changed, 279 insertions(+), 27 deletions(-)
> > >
> > > diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
> > > index 062125501788..d1fa4c4d4d9e 100644
> > > --- a/drivers/media/i2c/imx334.c
> > > +++ b/drivers/media/i2c/imx334.c
> > > @@ -79,7 +79,6 @@ struct imx334_reg_list {
> > > * struct imx334_mode - imx334 sensor mode structure
> > > * @width: Frame width
> > > * @height: Frame height
> > > - * @code: Format code
> > > * @hblank: Horizontal blanking in lines
> > > * @vblank: Vertical blanking in lines
> > > * @vblank_min: Minimal vertical blanking in lines @@ -91,7 +90,6 @@
> > > struct imx334_reg_list { struct imx334_mode {
> > > u32 width;
> > > u32 height;
> > > - u32 code;
> > > u32 hblank;
> > > u32 vblank;
> > > u32 vblank_min;
> > > @@ -119,6 +117,7 @@ struct imx334_mode {
> > > * @vblank: Vertical blanking in lines
> > > * @cur_mode: Pointer to current selected sensor mode
> > > * @mutex: Mutex for serializing sensor controls
> > > + * @cur_code: current selected format code
> > > * @streaming: Flag indicating streaming state
> > > */
> > > struct imx334 {
> > > @@ -140,6 +139,7 @@ struct imx334 {
> > > u32 vblank;
> > > const struct imx334_mode *cur_mode;
> > > struct mutex mutex;
> > > + u32 cur_code;
> > > bool streaming;
> > > };
> > >
> > > @@ -147,6 +147,169 @@ static const s64 link_freq[] = {
> > > IMX334_LINK_FREQ,
> > > };
> > >
> > > +/* Sensor mode registers */
> > > +static const struct imx334_reg mode_1920x1080_regs[] = {
> > > + {0x3000, 0x01},
> > > + {0x3018, 0x04},
> > > + {0x3030, 0xCA},
> > > + {0x3031, 0x08},
> > > + {0x3032, 0x00},
> > > + {0x3034, 0x4C},
> > > + {0x3035, 0x04},
> > > + {0x302C, 0xF0},
> > > + {0x302D, 0x03},
> > > + {0x302E, 0x80},
> > > + {0x302F, 0x07},
> > > + {0x3074, 0xCC},
> > > + {0x3075, 0x02},
> > > + {0x308E, 0xCD},
> > > + {0x308F, 0x02},
> > > + {0x3076, 0x38},
> > > + {0x3077, 0x04},
> > > + {0x3090, 0x38},
> > > + {0x3091, 0x04},
> > > + {0x3308, 0x38},
> > > + {0x3309, 0x04},
> > > + {0x30C6, 0x00},
> > > + {0x30C7, 0x00},
> > > + {0x30CE, 0x00},
> > > + {0x30CF, 0x00},
> > > + {0x30D8, 0x18},
> > > + {0x30D9, 0x0A},
> > > + {0x304C, 0x00},
> > > + {0x304E, 0x00},
> > > + {0x304F, 0x00},
> > > + {0x3050, 0x00},
> > > + {0x30B6, 0x00},
> > > + {0x30B7, 0x00},
> > > + {0x3116, 0x08},
> > > + {0x3117, 0x00},
> > > + {0x31A0, 0x20},
> > > + {0x31A1, 0x0F},
> > > + {0x300C, 0x3B},
> > > + {0x300D, 0x29},
> > > + {0x314C, 0x29},
> > > + {0x314D, 0x01},
> > > + {0x315A, 0x0A},
> > > + {0x3168, 0xA0},
> > > + {0x316A, 0x7E},
> > > + {0x319E, 0x02},
> > > + {0x3199, 0x00},
> > > + {0x319D, 0x00},
> > > + {0x31DD, 0x03},
> > > + {0x3300, 0x00},
> > > + {0x341C, 0xFF},
> > > + {0x341D, 0x01},
> > > + {0x3A01, 0x03},
> > > + {0x3A18, 0x7F},
> > > + {0x3A19, 0x00},
> > > + {0x3A1A, 0x37},
> > > + {0x3A1B, 0x00},
> > > + {0x3A1C, 0x37},
> > > + {0x3A1D, 0x00},
> > > + {0x3A1E, 0xF7},
> > > + {0x3A1F, 0x00},
> > > + {0x3A20, 0x3F},
> > > + {0x3A21, 0x00},
> > > + {0x3A20, 0x6F},
> > > + {0x3A21, 0x00},
> > > + {0x3A20, 0x3F},
> > > + {0x3A21, 0x00},
> > > + {0x3A20, 0x5F},
> > > + {0x3A21, 0x00},
> > > + {0x3A20, 0x2F},
> > > + {0x3A21, 0x00},
> > > + {0x3078, 0x02},
> > > + {0x3079, 0x00},
> > > + {0x307A, 0x00},
> > > + {0x307B, 0x00},
> > > + {0x3080, 0x02},
> > > + {0x3081, 0x00},
> > > + {0x3082, 0x00},
> > > + {0x3083, 0x00},
> > > + {0x3088, 0x02},
> > > + {0x3094, 0x00},
> > > + {0x3095, 0x00},
> > > + {0x3096, 0x00},
> > > + {0x309B, 0x02},
> > > + {0x309C, 0x00},
> > > + {0x309D, 0x00},
> > > + {0x309E, 0x00},
> > > + {0x30A4, 0x00},
> > > + {0x30A5, 0x00},
> > > + {0x3288, 0x21},
> > > + {0x328A, 0x02},
> > > + {0x3414, 0x05},
> > > + {0x3416, 0x18},
> > > + {0x35AC, 0x0E},
> > > + {0x3648, 0x01},
> > > + {0x364A, 0x04},
> > > + {0x364C, 0x04},
> > > + {0x3678, 0x01},
> > > + {0x367C, 0x31},
> > > + {0x367E, 0x31},
> > > + {0x3708, 0x02},
> > > + {0x3714, 0x01},
> > > + {0x3715, 0x02},
> > > + {0x3716, 0x02},
> > > + {0x3717, 0x02},
> > > + {0x371C, 0x3D},
> > > + {0x371D, 0x3F},
> > > + {0x372C, 0x00},
> > > + {0x372D, 0x00},
> > > + {0x372E, 0x46},
> > > + {0x372F, 0x00},
> > > + {0x3730, 0x89},
> > > + {0x3731, 0x00},
> > > + {0x3732, 0x08},
> > > + {0x3733, 0x01},
> > > + {0x3734, 0xFE},
> > > + {0x3735, 0x05},
> > > + {0x375D, 0x00},
> > > + {0x375E, 0x00},
> > > + {0x375F, 0x61},
> > > + {0x3760, 0x06},
> > > + {0x3768, 0x1B},
> > > + {0x3769, 0x1B},
> > > + {0x376A, 0x1A},
> > > + {0x376B, 0x19},
> > > + {0x376C, 0x18},
> > > + {0x376D, 0x14},
> > > + {0x376E, 0x0F},
> > > + {0x3776, 0x00},
> > > + {0x3777, 0x00},
> > > + {0x3778, 0x46},
> > > + {0x3779, 0x00},
> > > + {0x377A, 0x08},
> > > + {0x377B, 0x01},
> > > + {0x377C, 0x45},
> > > + {0x377D, 0x01},
> > > + {0x377E, 0x23},
> > > + {0x377F, 0x02},
> > > + {0x3780, 0xD9},
> > > + {0x3781, 0x03},
> > > + {0x3782, 0xF5},
> > > + {0x3783, 0x06},
> > > + {0x3784, 0xA5},
> > > + {0x3788, 0x0F},
> > > + {0x378A, 0xD9},
> > > + {0x378B, 0x03},
> > > + {0x378C, 0xEB},
> > > + {0x378D, 0x05},
> > > + {0x378E, 0x87},
> > > + {0x378F, 0x06},
> > > + {0x3790, 0xF5},
> > > + {0x3792, 0x43},
> > > + {0x3794, 0x7A},
> > > + {0x3796, 0xA1},
> > > + {0x37B0, 0x37},
> > > + {0x3E04, 0x0E},
> > > + {0x30E8, 0x50},
> > > + {0x30E9, 0x00},
> > > + {0x3E04, 0x0E},
> > > + {0x3002, 0x00},
> > > +};
> > > +
> > > /* Sensor mode registers */
> > > static const struct imx334_reg mode_3840x2160_regs[] = {
> > > {0x3000, 0x01},
> > > @@ -243,20 +406,57 @@ static const struct imx334_reg
> > mode_3840x2160_regs[] = {
> > > {0x3a00, 0x01},
> > > };
> > >
> > > +static const struct imx334_reg raw10_framefmt_regs[] = {
> > > + {0x3050, 0x00},
> > > + {0x319D, 0x00},
> > > + {0x341C, 0xFF},
> > > + {0x341D, 0x01},
> > > +};
> > > +
> > > +static const struct imx334_reg raw12_framefmt_regs[] = {
> > > + {0x3050, 0x01},
> > > + {0x319D, 0x01},
> > > + {0x341C, 0x47},
> > > + {0x341D, 0x00},
> > > +};
> > > +
> > > +/*
> > >
> > > + */
> > > +static const u32 codes[] = {
> >
> > Just "codes" is a little vague ? What about imx334_mbus_codes[] ?
> >
> > > + MEDIA_BUS_FMT_SRGGB10_1X10,
> > > + MEDIA_BUS_FMT_SRGGB12_1X12,
> > > +};
> > > +
> > > /* Supported sensor mode configurations */ -static const struct
> > > imx334_mode supported_mode = {
> > > - .width = 3840,
> > > - .height = 2160,
> > > - .hblank = 560,
> > > - .vblank = 2340,
> > > - .vblank_min = 90,
> > > - .vblank_max = 132840,
> > > - .pclk = 594000000,
> > > - .link_freq_idx = 0,
> > > - .code = MEDIA_BUS_FMT_SRGGB12_1X12,
> > > - .reg_list = {
> > > - .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> > > - .regs = mode_3840x2160_regs,
> > > +static const struct imx334_mode supported_modes[] = {
> > > + {
> > > + .width = 1920,
> > > + .height = 1080,
> > > + .hblank = 280,
> > > + .vblank = 1170,
> > > + .vblank_min = 90,
> > > + .vblank_max = 132840,
> > > + .pclk = 594000000,
> > > + .link_freq_idx = 0,
> > > + .reg_list = {
> > > + .num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
> > > + .regs = mode_1920x1080_regs,
> > > + },
> > > + },
> > > + {
> > > + .width = 3840,
> > > + .height = 2160,
> > > + .hblank = 560,
> > > + .vblank = 2340,
> > > + .vblank_min = 90,
> > > + .vblank_max = 132840,
> > > + .pclk = 594000000,
> > > + .link_freq_idx = 0,
> > > + .reg_list = {
> > > + .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> > > + .regs = mode_3840x2160_regs,
> > > + },
> >
> > Nit: I would keep the existing formats and code in position [0] so that if
> > additional modes are added the defaults can be kept in [0]. Also I usually see
> > drivers listing larger modes first, but that might not be a strict rule.
> >
> > > },
> > > };
> > >
> > > @@ -382,7 +582,8 @@ static int imx334_update_controls(struct imx334
> > *imx334,
> > > if (ret)
> > > return ret;
> > >
> > > - ret = __v4l2_ctrl_s_ctrl(imx334->hblank_ctrl, mode->hblank);
> > > + ret = __v4l2_ctrl_modify_range(imx334->hblank_ctrl,
> > IMX334_REG_MIN,
> > > + IMX334_REG_MAX, 1, mode->hblank);
> >
> > I might have missed why is this change related
>
> Hblank is readonly variable.
> If I use __v4l2_ctrl_s_ctrl function update return error.
So it's a separate fix unrelated to the introduction of the new mode ?
Probably it never triggered before as we had a single mode so the
control was actually never updated, but it's a fix worth a patch of
his own maybe.
I would make a separate patch before this one or clearly mention in the
commit message that also this is changed and why.
> >
> > > if (ret)
> > > return ret;
> > >
> > > @@ -506,10 +707,10 @@ static int imx334_enum_mbus_code(struct
> > v4l2_subdev *sd,
> > > struct v4l2_subdev_state *sd_state,
> > > struct v4l2_subdev_mbus_code_enum
> > > *code) {
> > > - if (code->index > 0)
> > > + if (code->index >= ARRAY_SIZE(codes))
> > > return -EINVAL;
> > >
> > > - code->code = supported_mode.code;
> > > + code->code = codes[code->index];
> > >
> > > return 0;
> > > }
> > > @@ -526,15 +727,20 @@ static int imx334_enum_frame_size(struct
> > v4l2_subdev *sd,
> > > struct v4l2_subdev_state *sd_state,
> > > struct v4l2_subdev_frame_size_enum
> > > *fsize) {
> > > - if (fsize->index > 0)
> > > + int i;
> > > +
> > > + if (fsize->index >= ARRAY_SIZE(supported_modes))
> > > return -EINVAL;
> > >
> > > - if (fsize->code != supported_mode.code)
> > > + for (i = 0; i < ARRAY_SIZE(codes); i++) {
> >
> > Can we use for (unsigned int i = 0; ... ) now that C99 has been adopted ?
>
> C99 might be adopted.
> But I have not observered no one is started using.
>
$ git grep -e "for (unsigned " -e "for (int " v6.0-rc2 | wc -l
186
> >
> > > + if (codes[i] == fsize->code)
> > > + break;
> > > return -EINVAL;
> >
> > Are you sure this is right ?
> > If the format code in fsize->code is == codes[1] you will return -EINVAL ?
>
> I think this will break the for loop, if fsize->code is == codes[1]
Yes but before getting to codes[1] you would test codes[0] and if
fsize->code != codes[0] you will return -EINVAL
Am I reading this wrong ?
>
> >
> > Does the sensor support more formats than
> > MEDIA_BUS_FMT_SRGGB10_1X10 and MEDIA_BUS_FMT_SRGGB12_1X12 ?
> > Because otherwise you could replace the for loop with a simple check.
> >
> > However support for flip might change the bayer pattern, so it's better to
> > keep the loop maybe.
> >
> > What about centrlize it like you're doing in imx219_get_format_code() and
> > use it here ? You can place the helper just after the supported mbus codes
> > declaration maybe ?
> >
> Yes, it is good. But imx334 do not have direct register to do VFLIP.
>
> >
> > > + }
> > >
> > > - fsize->min_width = supported_mode.width;
> > > + fsize->min_width = supported_modes[fsize->index].width;
> > > fsize->max_width = fsize->min_width;
> > > - fsize->min_height = supported_mode.height;
> > > + fsize->min_height = supported_modes[fsize->index].height;
> > > fsize->max_height = fsize->min_height;
> > >
> > > return 0;
> > > @@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct imx334
> > > *imx334, {
> > > fmt->format.width = mode->width;
> > > fmt->format.height = mode->height;
> > > - fmt->format.code = mode->code;
> > > + fmt->format.code = imx334->cur_code;
> > > fmt->format.field = V4L2_FIELD_NONE;
> > > fmt->format.colorspace = V4L2_COLORSPACE_RAW;
> > > fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; @@ -591,6
> > > +797,18 @@ static int imx334_get_pad_format(struct v4l2_subdev *sd,
> > > return 0;
> > > }
> > >
> > > +static int imx219_get_format_code(struct imx334 *imx334, struct
> > > +v4l2_subdev_format *fmt) {
> > > + int i;
> > > +
> > > + for (i = 0; i < ARRAY_SIZE(codes); i++) {
> >
> > Ditto, unsigned int and possibily declared inside the for loop
> >
> > > + if (codes[i] == fmt->format.code)
> > > + return codes[i];
> > > + }
> > > +
> > > + return -EINVAL;
> > > +}
> > > +
> > > /**
> > > * imx334_set_pad_format() - Set subdevice pad format
> > > * @sd: pointer to imx334 V4L2 sub-device structure @@ -606,10
> > > +824,21 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,
> > > struct imx334 *imx334 = to_imx334(sd);
> > > const struct imx334_mode *mode;
> > > int ret = 0;
> > > + u32 code;
> > >
> > > mutex_lock(&imx334->mutex);
> > >
> > > - mode = &supported_mode;
> > > + code = imx219_get_format_code(imx334, fmt);
> > > + if (code < 0)
> > > + return -EINVAL;
> > > +
> > > + imx334->cur_code = code;
> > > +
> > > + mode = v4l2_find_nearest_size(supported_modes,
> > > + ARRAY_SIZE(supported_modes),
> > > + width, height,
> > > + fmt->format.width,
> > > + fmt->format.height);
> > > +
> > > imx334_fill_pad_format(imx334, mode, fmt);
> > >
> > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { @@ -617,7 +846,7
> > @@
> > > static int imx334_set_pad_format(struct v4l2_subdev *sd,
> > >
> > > framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> > > *framefmt = fmt->format;
> > > - } else {
> > > + } else if (imx334->cur_mode != mode) {
> >
> > Is this change related ? I think it's good as it avoids an unecessary update of
> > the controls, but maybe it's not related to this patch ?
>
> I have updated mode[] array new set of value,
> Insated of calling functions simply.
> Just added a check the the mode changed then only we need to updated other parameters
> Same as imx219 code
You're right, we had a single mode before this change :)
>
> Thanks,
> Shravan
>
> >
> > Thanks
> > j
> >
> > > ret = imx334_update_controls(imx334, mode);
> > > if (!ret)
> > > imx334->cur_mode = mode; @@ -642,11 +871,26 @@
> > > static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
> > > struct v4l2_subdev_format fmt = { 0 };
> > >
> > > fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY :
> > V4L2_SUBDEV_FORMAT_ACTIVE;
> > > - imx334_fill_pad_format(imx334, &supported_mode, &fmt);
> > > + imx334_fill_pad_format(imx334, &supported_modes[1], &fmt);
> > >
> > > return imx334_set_pad_format(sd, sd_state, &fmt); }
> > >
> > > +static int imx334_set_framefmt(struct imx334 *imx334) {
> > > + switch (imx334->cur_code) {
> > > + case MEDIA_BUS_FMT_SRGGB10_1X10:
> > > + return imx334_write_regs(imx334, raw10_framefmt_regs,
> > > +
> > > +ARRAY_SIZE(raw10_framefmt_regs));
> > > +
> > > + case MEDIA_BUS_FMT_SRGGB12_1X12:
> > > + return imx334_write_regs(imx334, raw12_framefmt_regs,
> > > + ARRAY_SIZE(raw12_framefmt_regs));
> > > + }
> > > +
> > > + return -EINVAL;
> > > +}
> > > +
> > > /**
> > > * imx334_start_streaming() - Start sensor stream
> > > * @imx334: pointer to imx334 device
> > > @@ -667,6 +911,13 @@ static int imx334_start_streaming(struct imx334
> > *imx334)
> > > return ret;
> > > }
> > >
> > > + ret = imx334_set_framefmt(imx334);
> > > + if (ret) {
> > > + dev_err(imx334->dev, "%s failed to set frame format: %d\n",
> > > + __func__, ret);
> > > + return ret;
> > > + }
> > > +
> > > /* Setup handler will write actual exposure and gain */
> > > ret = __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler);
> > > if (ret) {
> > > @@ -1037,7 +1288,8 @@ static int imx334_probe(struct i2c_client *client)
> > > }
> > >
> > > /* Set default mode to max resolution */
> > > - imx334->cur_mode = &supported_mode;
> > > + imx334->cur_mode = &supported_modes[1];
> > > + imx334->cur_code = codes[1];
> > > imx334->vblank = imx334->cur_mode->vblank;
> > >
> > > ret = imx334_init_controls(imx334);
> > > --
> > > 2.17.1
> > >
> -----Original Message-----
> From: Jacopo Mondi <[email protected]>
> Sent: 25 August 2022 01:00 PM
> To: shravan Chippa - I35088 <[email protected]>
> Cc: [email protected]; [email protected];
> [email protected]; [email protected]; linux-
> [email protected]; Conor Dooley - M52691
> <[email protected]>; Battu Prakash Reddy - I30399
> <[email protected]>
> Subject: Re: [PATCH] media: i2c: imx334: support lower bandwidth mode
>
> [You don't often get email from [email protected]. Learn why this is
> important at https://aka.ms/LearnAboutSenderIdentification ]
>
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
>
> Hi Shravan
>
> On Thu, Aug 25, 2022 at 07:16:22AM +0000, [email protected]
> wrote:
> >
> >
> > > -----Original Message-----
> > > From: Jacopo Mondi <[email protected]>
> > > Sent: 22 August 2022 09:23 PM
> > > To: shravan Chippa - I35088 <[email protected]>
> > > Cc: [email protected]; [email protected];
> > > [email protected]; [email protected]; linux-
> > > [email protected]; Conor Dooley - M52691
> > > <[email protected]>; Battu Prakash Reddy - I30399
> > > <[email protected]>
> > > Subject: Re: [PATCH] media: i2c: imx334: support lower bandwidth
> > > mode
> > >
> > > EXTERNAL EMAIL: Do not click links or open attachments unless you
> > > know the content is safe
> > >
> > > Hello Shravan,
> > >
> > > On Thu, Jul 28, 2022 at 12:00:44PM +0530, shravan kumar wrote:
> > > > From: Shravan Chippa <[email protected]>
> > > >
> > > > Some platforms may not be capable of supporting the bandwidth
> > > > required for 12 bit or 3840x2160 resolutions.
> > > >
> > > > Add support for dynamically selecting 10 bit and 1920x1080
> > > > resolutions while leaving the existing configuration as default
> > > >
> > > > CC: Conor Dooley <[email protected]>
> > > > Signed-off-by: Prakash Battu <[email protected]>
> > > > Signed-off-by: Shravan Chippa <[email protected]>
> > > > ---
> > > > drivers/media/i2c/imx334.c | 306
> > > > +++++++++++++++++++++++++++++++++----
> > > > 1 file changed, 279 insertions(+), 27 deletions(-)
> > > >
> > > > diff --git a/drivers/media/i2c/imx334.c
> > > > b/drivers/media/i2c/imx334.c index 062125501788..d1fa4c4d4d9e
> > > > 100644
> > > > --- a/drivers/media/i2c/imx334.c
> > > > +++ b/drivers/media/i2c/imx334.c
> > > > @@ -79,7 +79,6 @@ struct imx334_reg_list {
> > > > * struct imx334_mode - imx334 sensor mode structure
> > > > * @width: Frame width
> > > > * @height: Frame height
> > > > - * @code: Format code
> > > > * @hblank: Horizontal blanking in lines
> > > > * @vblank: Vertical blanking in lines
> > > > * @vblank_min: Minimal vertical blanking in lines @@ -91,7 +90,6
> > > > @@ struct imx334_reg_list { struct imx334_mode {
> > > > u32 width;
> > > > u32 height;
> > > > - u32 code;
> > > > u32 hblank;
> > > > u32 vblank;
> > > > u32 vblank_min;
> > > > @@ -119,6 +117,7 @@ struct imx334_mode {
> > > > * @vblank: Vertical blanking in lines
> > > > * @cur_mode: Pointer to current selected sensor mode
> > > > * @mutex: Mutex for serializing sensor controls
> > > > + * @cur_code: current selected format code
> > > > * @streaming: Flag indicating streaming state
> > > > */
> > > > struct imx334 {
> > > > @@ -140,6 +139,7 @@ struct imx334 {
> > > > u32 vblank;
> > > > const struct imx334_mode *cur_mode;
> > > > struct mutex mutex;
> > > > + u32 cur_code;
> > > > bool streaming;
> > > > };
> > > >
> > > > @@ -147,6 +147,169 @@ static const s64 link_freq[] = {
> > > > IMX334_LINK_FREQ,
> > > > };
> > > >
> > > > +/* Sensor mode registers */
> > > > +static const struct imx334_reg mode_1920x1080_regs[] = {
> > > > + {0x3000, 0x01},
> > > > + {0x3018, 0x04},
> > > > + {0x3030, 0xCA},
> > > > + {0x3031, 0x08},
> > > > + {0x3032, 0x00},
> > > > + {0x3034, 0x4C},
> > > > + {0x3035, 0x04},
> > > > + {0x302C, 0xF0},
> > > > + {0x302D, 0x03},
> > > > + {0x302E, 0x80},
> > > > + {0x302F, 0x07},
> > > > + {0x3074, 0xCC},
> > > > + {0x3075, 0x02},
> > > > + {0x308E, 0xCD},
> > > > + {0x308F, 0x02},
> > > > + {0x3076, 0x38},
> > > > + {0x3077, 0x04},
> > > > + {0x3090, 0x38},
> > > > + {0x3091, 0x04},
> > > > + {0x3308, 0x38},
> > > > + {0x3309, 0x04},
> > > > + {0x30C6, 0x00},
> > > > + {0x30C7, 0x00},
> > > > + {0x30CE, 0x00},
> > > > + {0x30CF, 0x00},
> > > > + {0x30D8, 0x18},
> > > > + {0x30D9, 0x0A},
> > > > + {0x304C, 0x00},
> > > > + {0x304E, 0x00},
> > > > + {0x304F, 0x00},
> > > > + {0x3050, 0x00},
> > > > + {0x30B6, 0x00},
> > > > + {0x30B7, 0x00},
> > > > + {0x3116, 0x08},
> > > > + {0x3117, 0x00},
> > > > + {0x31A0, 0x20},
> > > > + {0x31A1, 0x0F},
> > > > + {0x300C, 0x3B},
> > > > + {0x300D, 0x29},
> > > > + {0x314C, 0x29},
> > > > + {0x314D, 0x01},
> > > > + {0x315A, 0x0A},
> > > > + {0x3168, 0xA0},
> > > > + {0x316A, 0x7E},
> > > > + {0x319E, 0x02},
> > > > + {0x3199, 0x00},
> > > > + {0x319D, 0x00},
> > > > + {0x31DD, 0x03},
> > > > + {0x3300, 0x00},
> > > > + {0x341C, 0xFF},
> > > > + {0x341D, 0x01},
> > > > + {0x3A01, 0x03},
> > > > + {0x3A18, 0x7F},
> > > > + {0x3A19, 0x00},
> > > > + {0x3A1A, 0x37},
> > > > + {0x3A1B, 0x00},
> > > > + {0x3A1C, 0x37},
> > > > + {0x3A1D, 0x00},
> > > > + {0x3A1E, 0xF7},
> > > > + {0x3A1F, 0x00},
> > > > + {0x3A20, 0x3F},
> > > > + {0x3A21, 0x00},
> > > > + {0x3A20, 0x6F},
> > > > + {0x3A21, 0x00},
> > > > + {0x3A20, 0x3F},
> > > > + {0x3A21, 0x00},
> > > > + {0x3A20, 0x5F},
> > > > + {0x3A21, 0x00},
> > > > + {0x3A20, 0x2F},
> > > > + {0x3A21, 0x00},
> > > > + {0x3078, 0x02},
> > > > + {0x3079, 0x00},
> > > > + {0x307A, 0x00},
> > > > + {0x307B, 0x00},
> > > > + {0x3080, 0x02},
> > > > + {0x3081, 0x00},
> > > > + {0x3082, 0x00},
> > > > + {0x3083, 0x00},
> > > > + {0x3088, 0x02},
> > > > + {0x3094, 0x00},
> > > > + {0x3095, 0x00},
> > > > + {0x3096, 0x00},
> > > > + {0x309B, 0x02},
> > > > + {0x309C, 0x00},
> > > > + {0x309D, 0x00},
> > > > + {0x309E, 0x00},
> > > > + {0x30A4, 0x00},
> > > > + {0x30A5, 0x00},
> > > > + {0x3288, 0x21},
> > > > + {0x328A, 0x02},
> > > > + {0x3414, 0x05},
> > > > + {0x3416, 0x18},
> > > > + {0x35AC, 0x0E},
> > > > + {0x3648, 0x01},
> > > > + {0x364A, 0x04},
> > > > + {0x364C, 0x04},
> > > > + {0x3678, 0x01},
> > > > + {0x367C, 0x31},
> > > > + {0x367E, 0x31},
> > > > + {0x3708, 0x02},
> > > > + {0x3714, 0x01},
> > > > + {0x3715, 0x02},
> > > > + {0x3716, 0x02},
> > > > + {0x3717, 0x02},
> > > > + {0x371C, 0x3D},
> > > > + {0x371D, 0x3F},
> > > > + {0x372C, 0x00},
> > > > + {0x372D, 0x00},
> > > > + {0x372E, 0x46},
> > > > + {0x372F, 0x00},
> > > > + {0x3730, 0x89},
> > > > + {0x3731, 0x00},
> > > > + {0x3732, 0x08},
> > > > + {0x3733, 0x01},
> > > > + {0x3734, 0xFE},
> > > > + {0x3735, 0x05},
> > > > + {0x375D, 0x00},
> > > > + {0x375E, 0x00},
> > > > + {0x375F, 0x61},
> > > > + {0x3760, 0x06},
> > > > + {0x3768, 0x1B},
> > > > + {0x3769, 0x1B},
> > > > + {0x376A, 0x1A},
> > > > + {0x376B, 0x19},
> > > > + {0x376C, 0x18},
> > > > + {0x376D, 0x14},
> > > > + {0x376E, 0x0F},
> > > > + {0x3776, 0x00},
> > > > + {0x3777, 0x00},
> > > > + {0x3778, 0x46},
> > > > + {0x3779, 0x00},
> > > > + {0x377A, 0x08},
> > > > + {0x377B, 0x01},
> > > > + {0x377C, 0x45},
> > > > + {0x377D, 0x01},
> > > > + {0x377E, 0x23},
> > > > + {0x377F, 0x02},
> > > > + {0x3780, 0xD9},
> > > > + {0x3781, 0x03},
> > > > + {0x3782, 0xF5},
> > > > + {0x3783, 0x06},
> > > > + {0x3784, 0xA5},
> > > > + {0x3788, 0x0F},
> > > > + {0x378A, 0xD9},
> > > > + {0x378B, 0x03},
> > > > + {0x378C, 0xEB},
> > > > + {0x378D, 0x05},
> > > > + {0x378E, 0x87},
> > > > + {0x378F, 0x06},
> > > > + {0x3790, 0xF5},
> > > > + {0x3792, 0x43},
> > > > + {0x3794, 0x7A},
> > > > + {0x3796, 0xA1},
> > > > + {0x37B0, 0x37},
> > > > + {0x3E04, 0x0E},
> > > > + {0x30E8, 0x50},
> > > > + {0x30E9, 0x00},
> > > > + {0x3E04, 0x0E},
> > > > + {0x3002, 0x00},
> > > > +};
> > > > +
> > > > /* Sensor mode registers */
> > > > static const struct imx334_reg mode_3840x2160_regs[] = {
> > > > {0x3000, 0x01},
> > > > @@ -243,20 +406,57 @@ static const struct imx334_reg
> > > mode_3840x2160_regs[] = {
> > > > {0x3a00, 0x01},
> > > > };
> > > >
> > > > +static const struct imx334_reg raw10_framefmt_regs[] = {
> > > > + {0x3050, 0x00},
> > > > + {0x319D, 0x00},
> > > > + {0x341C, 0xFF},
> > > > + {0x341D, 0x01},
> > > > +};
> > > > +
> > > > +static const struct imx334_reg raw12_framefmt_regs[] = {
> > > > + {0x3050, 0x01},
> > > > + {0x319D, 0x01},
> > > > + {0x341C, 0x47},
> > > > + {0x341D, 0x00},
> > > > +};
> > > > +
> > > > +/*
> > > >
> > > > + */
> > > > +static const u32 codes[] = {
> > >
> > > Just "codes" is a little vague ? What about imx334_mbus_codes[] ?
> > >
> > > > + MEDIA_BUS_FMT_SRGGB10_1X10,
> > > > + MEDIA_BUS_FMT_SRGGB12_1X12,
> > > > +};
> > > > +
> > > > /* Supported sensor mode configurations */ -static const struct
> > > > imx334_mode supported_mode = {
> > > > - .width = 3840,
> > > > - .height = 2160,
> > > > - .hblank = 560,
> > > > - .vblank = 2340,
> > > > - .vblank_min = 90,
> > > > - .vblank_max = 132840,
> > > > - .pclk = 594000000,
> > > > - .link_freq_idx = 0,
> > > > - .code = MEDIA_BUS_FMT_SRGGB12_1X12,
> > > > - .reg_list = {
> > > > - .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> > > > - .regs = mode_3840x2160_regs,
> > > > +static const struct imx334_mode supported_modes[] = {
> > > > + {
> > > > + .width = 1920,
> > > > + .height = 1080,
> > > > + .hblank = 280,
> > > > + .vblank = 1170,
> > > > + .vblank_min = 90,
> > > > + .vblank_max = 132840,
> > > > + .pclk = 594000000,
> > > > + .link_freq_idx = 0,
> > > > + .reg_list = {
> > > > + .num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
> > > > + .regs = mode_1920x1080_regs,
> > > > + },
> > > > + },
> > > > + {
> > > > + .width = 3840,
> > > > + .height = 2160,
> > > > + .hblank = 560,
> > > > + .vblank = 2340,
> > > > + .vblank_min = 90,
> > > > + .vblank_max = 132840,
> > > > + .pclk = 594000000,
> > > > + .link_freq_idx = 0,
> > > > + .reg_list = {
> > > > + .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> > > > + .regs = mode_3840x2160_regs,
> > > > + },
> > >
> > > Nit: I would keep the existing formats and code in position [0] so
> > > that if additional modes are added the defaults can be kept in [0].
> > > Also I usually see drivers listing larger modes first, but that might not be a
> strict rule.
> > >
> > > > },
> > > > };
> > > >
> > > > @@ -382,7 +582,8 @@ static int imx334_update_controls(struct
> > > > imx334
> > > *imx334,
> > > > if (ret)
> > > > return ret;
> > > >
> > > > - ret = __v4l2_ctrl_s_ctrl(imx334->hblank_ctrl, mode->hblank);
> > > > + ret = __v4l2_ctrl_modify_range(imx334->hblank_ctrl,
> > > IMX334_REG_MIN,
> > > > + IMX334_REG_MAX, 1,
> > > > + mode->hblank);
> > >
> > > I might have missed why is this change related
> >
> > Hblank is readonly variable.
> > If I use __v4l2_ctrl_s_ctrl function update return error.
>
> So it's a separate fix unrelated to the introduction of the new mode ?
>
> Probably it never triggered before as we had a single mode so the control
> was actually never updated, but it's a fix worth a patch of his own maybe.
>
> I would make a separate patch before this one or clearly mention in the
> commit message that also this is changed and why.
>
> > >
> > > > if (ret)
> > > > return ret;
> > > >
> > > > @@ -506,10 +707,10 @@ static int imx334_enum_mbus_code(struct
> > > v4l2_subdev *sd,
> > > > struct v4l2_subdev_state *sd_state,
> > > > struct v4l2_subdev_mbus_code_enum
> > > > *code) {
> > > > - if (code->index > 0)
> > > > + if (code->index >= ARRAY_SIZE(codes))
> > > > return -EINVAL;
> > > >
> > > > - code->code = supported_mode.code;
> > > > + code->code = codes[code->index];
> > > >
> > > > return 0;
> > > > }
> > > > @@ -526,15 +727,20 @@ static int imx334_enum_frame_size(struct
> > > v4l2_subdev *sd,
> > > > struct v4l2_subdev_state *sd_state,
> > > > struct v4l2_subdev_frame_size_enum
> > > > *fsize) {
> > > > - if (fsize->index > 0)
> > > > + int i;
> > > > +
> > > > + if (fsize->index >= ARRAY_SIZE(supported_modes))
> > > > return -EINVAL;
> > > >
> > > > - if (fsize->code != supported_mode.code)
> > > > + for (i = 0; i < ARRAY_SIZE(codes); i++) {
> > >
> > > Can we use for (unsigned int i = 0; ... ) now that C99 has been adopted ?
> >
> > C99 might be adopted.
> > But I have not observered no one is started using.
> >
>
> $ git grep -e "for (unsigned " -e "for (int " v6.0-rc2 | wc -l
> 186
>
> > >
> > > > + if (codes[i] == fsize->code)
> > > > + break;
> > > > return -EINVAL;
> > >
> > > Are you sure this is right ?
> > > If the format code in fsize->code is == codes[1] you will return -EINVAL ?
> >
> > I think this will break the for loop, if fsize->code is == codes[1]
>
> Yes but before getting to codes[1] you would test codes[0] and if
> fsize->code != codes[0] you will return -EINVAL
>
> Am I reading this wrong ?
>
Yes, I am wrong
If (codes[0] != fsize->code && codes[1] != fsize->code )
return -EINVAL
> > >
> > > Does the sensor support more formats than
> > > MEDIA_BUS_FMT_SRGGB10_1X10 and
> MEDIA_BUS_FMT_SRGGB12_1X12 ?
> > > Because otherwise you could replace the for loop with a simple check.
> > >
> > > However support for flip might change the bayer pattern, so it's
> > > better to keep the loop maybe.
> > >
> > > What about centrlize it like you're doing in
> > > imx219_get_format_code() and use it here ? You can place the helper
> > > just after the supported mbus codes declaration maybe ?
> > >
> > Yes, it is good. But imx334 do not have direct register to do VFLIP.
> >
> > >
> > > > + }
> > > >
> > > > - fsize->min_width = supported_mode.width;
> > > > + fsize->min_width = supported_modes[fsize->index].width;
> > > > fsize->max_width = fsize->min_width;
> > > > - fsize->min_height = supported_mode.height;
> > > > + fsize->min_height = supported_modes[fsize->index].height;
> > > > fsize->max_height = fsize->min_height;
> > > >
> > > > return 0;
> > > > @@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct
> > > > imx334 *imx334, {
> > > > fmt->format.width = mode->width;
> > > > fmt->format.height = mode->height;
> > > > - fmt->format.code = mode->code;
> > > > + fmt->format.code = imx334->cur_code;
> > > > fmt->format.field = V4L2_FIELD_NONE;
> > > > fmt->format.colorspace = V4L2_COLORSPACE_RAW;
> > > > fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; @@ -591,6
> > > > +797,18 @@ static int imx334_get_pad_format(struct v4l2_subdev
> > > > +*sd,
> > > > return 0;
> > > > }
> > > >
> > > > +static int imx219_get_format_code(struct imx334 *imx334, struct
> > > > +v4l2_subdev_format *fmt) {
> > > > + int i;
> > > > +
> > > > + for (i = 0; i < ARRAY_SIZE(codes); i++) {
> > >
> > > Ditto, unsigned int and possibily declared inside the for loop
> > >
> > > > + if (codes[i] == fmt->format.code)
> > > > + return codes[i];
> > > > + }
> > > > +
> > > > + return -EINVAL;
> > > > +}
> > > > +
> > > > /**
> > > > * imx334_set_pad_format() - Set subdevice pad format
> > > > * @sd: pointer to imx334 V4L2 sub-device structure @@ -606,10
> > > > +824,21 @@ static int imx334_set_pad_format(struct v4l2_subdev
> > > > +*sd,
> > > > struct imx334 *imx334 = to_imx334(sd);
> > > > const struct imx334_mode *mode;
> > > > int ret = 0;
> > > > + u32 code;
> > > >
> > > > mutex_lock(&imx334->mutex);
> > > >
> > > > - mode = &supported_mode;
> > > > + code = imx219_get_format_code(imx334, fmt);
> > > > + if (code < 0)
> > > > + return -EINVAL;
> > > > +
> > > > + imx334->cur_code = code;
> > > > +
> > > > + mode = v4l2_find_nearest_size(supported_modes,
> > > > + ARRAY_SIZE(supported_modes),
> > > > + width, height,
> > > > + fmt->format.width,
> > > > + fmt->format.height);
> > > > +
> > > > imx334_fill_pad_format(imx334, mode, fmt);
> > > >
> > > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { @@ -617,7 +846,7
> > > @@
> > > > static int imx334_set_pad_format(struct v4l2_subdev *sd,
> > > >
> > > > framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt-
> >pad);
> > > > *framefmt = fmt->format;
> > > > - } else {
> > > > + } else if (imx334->cur_mode != mode) {
> > >
> > > Is this change related ? I think it's good as it avoids an
> > > unecessary update of the controls, but maybe it's not related to this
> patch ?
> >
> > I have updated mode[] array new set of value, Insated of calling
> > functions simply.
> > Just added a check the the mode changed then only we need to updated
> > other parameters Same as imx219 code
>
> You're right, we had a single mode before this change :)
>
> >
> > Thanks,
> > Shravan
> >
> > >
> > > Thanks
> > > j
> > >
> > > > ret = imx334_update_controls(imx334, mode);
> > > > if (!ret)
> > > > imx334->cur_mode = mode; @@ -642,11 +871,26
> > > > @@ static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
> > > > struct v4l2_subdev_format fmt = { 0 };
> > > >
> > > > fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY :
> > > V4L2_SUBDEV_FORMAT_ACTIVE;
> > > > - imx334_fill_pad_format(imx334, &supported_mode, &fmt);
> > > > + imx334_fill_pad_format(imx334, &supported_modes[1], &fmt);
> > > >
> > > > return imx334_set_pad_format(sd, sd_state, &fmt); }
> > > >
> > > > +static int imx334_set_framefmt(struct imx334 *imx334) {
> > > > + switch (imx334->cur_code) {
> > > > + case MEDIA_BUS_FMT_SRGGB10_1X10:
> > > > + return imx334_write_regs(imx334,
> > > > +raw10_framefmt_regs,
> > > > +
> > > > +ARRAY_SIZE(raw10_framefmt_regs));
> > > > +
> > > > + case MEDIA_BUS_FMT_SRGGB12_1X12:
> > > > + return imx334_write_regs(imx334, raw12_framefmt_regs,
> > > > + ARRAY_SIZE(raw12_framefmt_regs));
> > > > + }
> > > > +
> > > > + return -EINVAL;
> > > > +}
> > > > +
> > > > /**
> > > > * imx334_start_streaming() - Start sensor stream
> > > > * @imx334: pointer to imx334 device @@ -667,6 +911,13 @@ static
> > > > int imx334_start_streaming(struct imx334
> > > *imx334)
> > > > return ret;
> > > > }
> > > >
> > > > + ret = imx334_set_framefmt(imx334);
> > > > + if (ret) {
> > > > + dev_err(imx334->dev, "%s failed to set frame format: %d\n",
> > > > + __func__, ret);
> > > > + return ret;
> > > > + }
> > > > +
> > > > /* Setup handler will write actual exposure and gain */
> > > > ret = __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler);
> > > > if (ret) {
> > > > @@ -1037,7 +1288,8 @@ static int imx334_probe(struct i2c_client
> *client)
> > > > }
> > > >
> > > > /* Set default mode to max resolution */
> > > > - imx334->cur_mode = &supported_mode;
> > > > + imx334->cur_mode = &supported_modes[1];
> > > > + imx334->cur_code = codes[1];
> > > > imx334->vblank = imx334->cur_mode->vblank;
> > > >
> > > > ret = imx334_init_controls(imx334);
> > > > --
> > > > 2.17.1
> > > >
Hi Shravan,
On Thu, Aug 25, 2022 at 11:09:03AM +0000, [email protected] wrote:
>
>
> > -----Original Message-----
> > From: Jacopo Mondi <[email protected]>
> > Sent: 25 August 2022 01:00 PM
> > To: shravan Chippa - I35088 <[email protected]>
> > Cc: [email protected]; [email protected];
> > [email protected]; [email protected]; linux-
> > [email protected]; Conor Dooley - M52691
> > <[email protected]>; Battu Prakash Reddy - I30399
> > <[email protected]>
> > Subject: Re: [PATCH] media: i2c: imx334: support lower bandwidth mode
> >
> > [You don't often get email from [email protected]. Learn why this is
> > important at https://aka.ms/LearnAboutSenderIdentification ]
> >
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> > content is safe
> >
> > Hi Shravan
> >
> > On Thu, Aug 25, 2022 at 07:16:22AM +0000, [email protected]
> > wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Jacopo Mondi <[email protected]>
> > > > Sent: 22 August 2022 09:23 PM
> > > > To: shravan Chippa - I35088 <[email protected]>
> > > > Cc: [email protected]; [email protected];
> > > > [email protected]; [email protected]; linux-
> > > > [email protected]; Conor Dooley - M52691
> > > > <[email protected]>; Battu Prakash Reddy - I30399
> > > > <[email protected]>
> > > > Subject: Re: [PATCH] media: i2c: imx334: support lower bandwidth
> > > > mode
> > > >
> > > > EXTERNAL EMAIL: Do not click links or open attachments unless you
> > > > know the content is safe
> > > >
> > > > Hello Shravan,
> > > >
> > > > On Thu, Jul 28, 2022 at 12:00:44PM +0530, shravan kumar wrote:
> > > > > From: Shravan Chippa <[email protected]>
> > > > >
> > > > > Some platforms may not be capable of supporting the bandwidth
> > > > > required for 12 bit or 3840x2160 resolutions.
> > > > >
> > > > > Add support for dynamically selecting 10 bit and 1920x1080
> > > > > resolutions while leaving the existing configuration as default
> > > > >
> > > > > CC: Conor Dooley <[email protected]>
> > > > > Signed-off-by: Prakash Battu <[email protected]>
> > > > > Signed-off-by: Shravan Chippa <[email protected]>
> > > > > ---
> > > > > drivers/media/i2c/imx334.c | 306
> > > > > +++++++++++++++++++++++++++++++++----
> > > > > 1 file changed, 279 insertions(+), 27 deletions(-)
> > > > >
> > > > > diff --git a/drivers/media/i2c/imx334.c
> > > > > b/drivers/media/i2c/imx334.c index 062125501788..d1fa4c4d4d9e
> > > > > 100644
> > > > > --- a/drivers/media/i2c/imx334.c
> > > > > +++ b/drivers/media/i2c/imx334.c
> > > > > @@ -79,7 +79,6 @@ struct imx334_reg_list {
> > > > > * struct imx334_mode - imx334 sensor mode structure
> > > > > * @width: Frame width
> > > > > * @height: Frame height
> > > > > - * @code: Format code
> > > > > * @hblank: Horizontal blanking in lines
> > > > > * @vblank: Vertical blanking in lines
> > > > > * @vblank_min: Minimal vertical blanking in lines @@ -91,7 +90,6
> > > > > @@ struct imx334_reg_list { struct imx334_mode {
> > > > > u32 width;
> > > > > u32 height;
> > > > > - u32 code;
> > > > > u32 hblank;
> > > > > u32 vblank;
> > > > > u32 vblank_min;
> > > > > @@ -119,6 +117,7 @@ struct imx334_mode {
> > > > > * @vblank: Vertical blanking in lines
> > > > > * @cur_mode: Pointer to current selected sensor mode
> > > > > * @mutex: Mutex for serializing sensor controls
> > > > > + * @cur_code: current selected format code
> > > > > * @streaming: Flag indicating streaming state
> > > > > */
> > > > > struct imx334 {
> > > > > @@ -140,6 +139,7 @@ struct imx334 {
> > > > > u32 vblank;
> > > > > const struct imx334_mode *cur_mode;
> > > > > struct mutex mutex;
> > > > > + u32 cur_code;
> > > > > bool streaming;
> > > > > };
> > > > >
> > > > > @@ -147,6 +147,169 @@ static const s64 link_freq[] = {
> > > > > IMX334_LINK_FREQ,
> > > > > };
> > > > >
> > > > > +/* Sensor mode registers */
> > > > > +static const struct imx334_reg mode_1920x1080_regs[] = {
> > > > > + {0x3000, 0x01},
> > > > > + {0x3018, 0x04},
> > > > > + {0x3030, 0xCA},
> > > > > + {0x3031, 0x08},
> > > > > + {0x3032, 0x00},
> > > > > + {0x3034, 0x4C},
> > > > > + {0x3035, 0x04},
> > > > > + {0x302C, 0xF0},
> > > > > + {0x302D, 0x03},
> > > > > + {0x302E, 0x80},
> > > > > + {0x302F, 0x07},
> > > > > + {0x3074, 0xCC},
> > > > > + {0x3075, 0x02},
> > > > > + {0x308E, 0xCD},
> > > > > + {0x308F, 0x02},
> > > > > + {0x3076, 0x38},
> > > > > + {0x3077, 0x04},
> > > > > + {0x3090, 0x38},
> > > > > + {0x3091, 0x04},
> > > > > + {0x3308, 0x38},
> > > > > + {0x3309, 0x04},
> > > > > + {0x30C6, 0x00},
> > > > > + {0x30C7, 0x00},
> > > > > + {0x30CE, 0x00},
> > > > > + {0x30CF, 0x00},
> > > > > + {0x30D8, 0x18},
> > > > > + {0x30D9, 0x0A},
> > > > > + {0x304C, 0x00},
> > > > > + {0x304E, 0x00},
> > > > > + {0x304F, 0x00},
> > > > > + {0x3050, 0x00},
> > > > > + {0x30B6, 0x00},
> > > > > + {0x30B7, 0x00},
> > > > > + {0x3116, 0x08},
> > > > > + {0x3117, 0x00},
> > > > > + {0x31A0, 0x20},
> > > > > + {0x31A1, 0x0F},
> > > > > + {0x300C, 0x3B},
> > > > > + {0x300D, 0x29},
> > > > > + {0x314C, 0x29},
> > > > > + {0x314D, 0x01},
> > > > > + {0x315A, 0x0A},
> > > > > + {0x3168, 0xA0},
> > > > > + {0x316A, 0x7E},
> > > > > + {0x319E, 0x02},
> > > > > + {0x3199, 0x00},
> > > > > + {0x319D, 0x00},
> > > > > + {0x31DD, 0x03},
> > > > > + {0x3300, 0x00},
> > > > > + {0x341C, 0xFF},
> > > > > + {0x341D, 0x01},
> > > > > + {0x3A01, 0x03},
> > > > > + {0x3A18, 0x7F},
> > > > > + {0x3A19, 0x00},
> > > > > + {0x3A1A, 0x37},
> > > > > + {0x3A1B, 0x00},
> > > > > + {0x3A1C, 0x37},
> > > > > + {0x3A1D, 0x00},
> > > > > + {0x3A1E, 0xF7},
> > > > > + {0x3A1F, 0x00},
> > > > > + {0x3A20, 0x3F},
> > > > > + {0x3A21, 0x00},
> > > > > + {0x3A20, 0x6F},
> > > > > + {0x3A21, 0x00},
> > > > > + {0x3A20, 0x3F},
> > > > > + {0x3A21, 0x00},
> > > > > + {0x3A20, 0x5F},
> > > > > + {0x3A21, 0x00},
> > > > > + {0x3A20, 0x2F},
> > > > > + {0x3A21, 0x00},
> > > > > + {0x3078, 0x02},
> > > > > + {0x3079, 0x00},
> > > > > + {0x307A, 0x00},
> > > > > + {0x307B, 0x00},
> > > > > + {0x3080, 0x02},
> > > > > + {0x3081, 0x00},
> > > > > + {0x3082, 0x00},
> > > > > + {0x3083, 0x00},
> > > > > + {0x3088, 0x02},
> > > > > + {0x3094, 0x00},
> > > > > + {0x3095, 0x00},
> > > > > + {0x3096, 0x00},
> > > > > + {0x309B, 0x02},
> > > > > + {0x309C, 0x00},
> > > > > + {0x309D, 0x00},
> > > > > + {0x309E, 0x00},
> > > > > + {0x30A4, 0x00},
> > > > > + {0x30A5, 0x00},
> > > > > + {0x3288, 0x21},
> > > > > + {0x328A, 0x02},
> > > > > + {0x3414, 0x05},
> > > > > + {0x3416, 0x18},
> > > > > + {0x35AC, 0x0E},
> > > > > + {0x3648, 0x01},
> > > > > + {0x364A, 0x04},
> > > > > + {0x364C, 0x04},
> > > > > + {0x3678, 0x01},
> > > > > + {0x367C, 0x31},
> > > > > + {0x367E, 0x31},
> > > > > + {0x3708, 0x02},
> > > > > + {0x3714, 0x01},
> > > > > + {0x3715, 0x02},
> > > > > + {0x3716, 0x02},
> > > > > + {0x3717, 0x02},
> > > > > + {0x371C, 0x3D},
> > > > > + {0x371D, 0x3F},
> > > > > + {0x372C, 0x00},
> > > > > + {0x372D, 0x00},
> > > > > + {0x372E, 0x46},
> > > > > + {0x372F, 0x00},
> > > > > + {0x3730, 0x89},
> > > > > + {0x3731, 0x00},
> > > > > + {0x3732, 0x08},
> > > > > + {0x3733, 0x01},
> > > > > + {0x3734, 0xFE},
> > > > > + {0x3735, 0x05},
> > > > > + {0x375D, 0x00},
> > > > > + {0x375E, 0x00},
> > > > > + {0x375F, 0x61},
> > > > > + {0x3760, 0x06},
> > > > > + {0x3768, 0x1B},
> > > > > + {0x3769, 0x1B},
> > > > > + {0x376A, 0x1A},
> > > > > + {0x376B, 0x19},
> > > > > + {0x376C, 0x18},
> > > > > + {0x376D, 0x14},
> > > > > + {0x376E, 0x0F},
> > > > > + {0x3776, 0x00},
> > > > > + {0x3777, 0x00},
> > > > > + {0x3778, 0x46},
> > > > > + {0x3779, 0x00},
> > > > > + {0x377A, 0x08},
> > > > > + {0x377B, 0x01},
> > > > > + {0x377C, 0x45},
> > > > > + {0x377D, 0x01},
> > > > > + {0x377E, 0x23},
> > > > > + {0x377F, 0x02},
> > > > > + {0x3780, 0xD9},
> > > > > + {0x3781, 0x03},
> > > > > + {0x3782, 0xF5},
> > > > > + {0x3783, 0x06},
> > > > > + {0x3784, 0xA5},
> > > > > + {0x3788, 0x0F},
> > > > > + {0x378A, 0xD9},
> > > > > + {0x378B, 0x03},
> > > > > + {0x378C, 0xEB},
> > > > > + {0x378D, 0x05},
> > > > > + {0x378E, 0x87},
> > > > > + {0x378F, 0x06},
> > > > > + {0x3790, 0xF5},
> > > > > + {0x3792, 0x43},
> > > > > + {0x3794, 0x7A},
> > > > > + {0x3796, 0xA1},
> > > > > + {0x37B0, 0x37},
> > > > > + {0x3E04, 0x0E},
> > > > > + {0x30E8, 0x50},
> > > > > + {0x30E9, 0x00},
> > > > > + {0x3E04, 0x0E},
> > > > > + {0x3002, 0x00},
> > > > > +};
> > > > > +
> > > > > /* Sensor mode registers */
> > > > > static const struct imx334_reg mode_3840x2160_regs[] = {
> > > > > {0x3000, 0x01},
> > > > > @@ -243,20 +406,57 @@ static const struct imx334_reg
> > > > mode_3840x2160_regs[] = {
> > > > > {0x3a00, 0x01},
> > > > > };
> > > > >
> > > > > +static const struct imx334_reg raw10_framefmt_regs[] = {
> > > > > + {0x3050, 0x00},
> > > > > + {0x319D, 0x00},
> > > > > + {0x341C, 0xFF},
> > > > > + {0x341D, 0x01},
> > > > > +};
> > > > > +
> > > > > +static const struct imx334_reg raw12_framefmt_regs[] = {
> > > > > + {0x3050, 0x01},
> > > > > + {0x319D, 0x01},
> > > > > + {0x341C, 0x47},
> > > > > + {0x341D, 0x00},
> > > > > +};
> > > > > +
> > > > > +/*
> > > > >
> > > > > + */
> > > > > +static const u32 codes[] = {
> > > >
> > > > Just "codes" is a little vague ? What about imx334_mbus_codes[] ?
> > > >
> > > > > + MEDIA_BUS_FMT_SRGGB10_1X10,
> > > > > + MEDIA_BUS_FMT_SRGGB12_1X12,
> > > > > +};
> > > > > +
> > > > > /* Supported sensor mode configurations */ -static const struct
> > > > > imx334_mode supported_mode = {
> > > > > - .width = 3840,
> > > > > - .height = 2160,
> > > > > - .hblank = 560,
> > > > > - .vblank = 2340,
> > > > > - .vblank_min = 90,
> > > > > - .vblank_max = 132840,
> > > > > - .pclk = 594000000,
> > > > > - .link_freq_idx = 0,
> > > > > - .code = MEDIA_BUS_FMT_SRGGB12_1X12,
> > > > > - .reg_list = {
> > > > > - .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> > > > > - .regs = mode_3840x2160_regs,
> > > > > +static const struct imx334_mode supported_modes[] = {
> > > > > + {
> > > > > + .width = 1920,
> > > > > + .height = 1080,
> > > > > + .hblank = 280,
> > > > > + .vblank = 1170,
> > > > > + .vblank_min = 90,
> > > > > + .vblank_max = 132840,
> > > > > + .pclk = 594000000,
> > > > > + .link_freq_idx = 0,
> > > > > + .reg_list = {
> > > > > + .num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
> > > > > + .regs = mode_1920x1080_regs,
> > > > > + },
> > > > > + },
> > > > > + {
> > > > > + .width = 3840,
> > > > > + .height = 2160,
> > > > > + .hblank = 560,
> > > > > + .vblank = 2340,
> > > > > + .vblank_min = 90,
> > > > > + .vblank_max = 132840,
> > > > > + .pclk = 594000000,
> > > > > + .link_freq_idx = 0,
> > > > > + .reg_list = {
> > > > > + .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> > > > > + .regs = mode_3840x2160_regs,
> > > > > + },
> > > >
> > > > Nit: I would keep the existing formats and code in position [0] so
> > > > that if additional modes are added the defaults can be kept in [0].
> > > > Also I usually see drivers listing larger modes first, but that might not be a
> > strict rule.
> > > >
> > > > > },
> > > > > };
> > > > >
> > > > > @@ -382,7 +582,8 @@ static int imx334_update_controls(struct
> > > > > imx334
> > > > *imx334,
> > > > > if (ret)
> > > > > return ret;
> > > > >
> > > > > - ret = __v4l2_ctrl_s_ctrl(imx334->hblank_ctrl, mode->hblank);
> > > > > + ret = __v4l2_ctrl_modify_range(imx334->hblank_ctrl,
> > > > IMX334_REG_MIN,
> > > > > + IMX334_REG_MAX, 1,
> > > > > + mode->hblank);
> > > >
> > > > I might have missed why is this change related
> > >
> > > Hblank is readonly variable.
> > > If I use __v4l2_ctrl_s_ctrl function update return error.
> >
> > So it's a separate fix unrelated to the introduction of the new mode ?
> >
> > Probably it never triggered before as we had a single mode so the control
> > was actually never updated, but it's a fix worth a patch of his own maybe.
> >
> > I would make a separate patch before this one or clearly mention in the
> > commit message that also this is changed and why.
> >
> > > >
> > > > > if (ret)
> > > > > return ret;
> > > > >
> > > > > @@ -506,10 +707,10 @@ static int imx334_enum_mbus_code(struct
> > > > v4l2_subdev *sd,
> > > > > struct v4l2_subdev_state *sd_state,
> > > > > struct v4l2_subdev_mbus_code_enum
> > > > > *code) {
> > > > > - if (code->index > 0)
> > > > > + if (code->index >= ARRAY_SIZE(codes))
> > > > > return -EINVAL;
> > > > >
> > > > > - code->code = supported_mode.code;
> > > > > + code->code = codes[code->index];
> > > > >
> > > > > return 0;
> > > > > }
> > > > > @@ -526,15 +727,20 @@ static int imx334_enum_frame_size(struct
> > > > v4l2_subdev *sd,
> > > > > struct v4l2_subdev_state *sd_state,
> > > > > struct v4l2_subdev_frame_size_enum
> > > > > *fsize) {
> > > > > - if (fsize->index > 0)
> > > > > + int i;
> > > > > +
> > > > > + if (fsize->index >= ARRAY_SIZE(supported_modes))
> > > > > return -EINVAL;
> > > > >
> > > > > - if (fsize->code != supported_mode.code)
> > > > > + for (i = 0; i < ARRAY_SIZE(codes); i++) {
> > > >
> > > > Can we use for (unsigned int i = 0; ... ) now that C99 has been adopted ?
> > >
> > > C99 might be adopted.
> > > But I have not observered no one is started using.
> > >
> >
> > $ git grep -e "for (unsigned " -e "for (int " v6.0-rc2 | wc -l
> > 186
> >
> > > >
> > > > > + if (codes[i] == fsize->code)
> > > > > + break;
> > > > > return -EINVAL;
> > > >
> > > > Are you sure this is right ?
> > > > If the format code in fsize->code is == codes[1] you will return -EINVAL ?
> > >
> > > I think this will break the for loop, if fsize->code is == codes[1]
> >
> > Yes but before getting to codes[1] you would test codes[0] and if
> > fsize->code != codes[0] you will return -EINVAL
> >
> > Am I reading this wrong ?
> >
>
> Yes, I am wrong
>
> If (codes[0] != fsize->code && codes[1] != fsize->code )
> return -EINVAL
>
Or, if you want to generalize it for future modes:
unsigned int i;
for (i = 0; i < ARRAY_SIZE(codes); ++i) {
if (codes[i] == fsize->code)
break;
}
if (i == ARRAY_SIZE(codes))
return -EINVAL;
Thanks
j
> > > >
> > > > Does the sensor support more formats than
> > > > MEDIA_BUS_FMT_SRGGB10_1X10 and
> > MEDIA_BUS_FMT_SRGGB12_1X12 ?
> > > > Because otherwise you could replace the for loop with a simple check.
> > > >
> > > > However support for flip might change the bayer pattern, so it's
> > > > better to keep the loop maybe.
> > > >
> > > > What about centrlize it like you're doing in
> > > > imx219_get_format_code() and use it here ? You can place the helper
> > > > just after the supported mbus codes declaration maybe ?
> > > >
> > > Yes, it is good. But imx334 do not have direct register to do VFLIP.
> > >
> > > >
> > > > > + }
> > > > >
> > > > > - fsize->min_width = supported_mode.width;
> > > > > + fsize->min_width = supported_modes[fsize->index].width;
> > > > > fsize->max_width = fsize->min_width;
> > > > > - fsize->min_height = supported_mode.height;
> > > > > + fsize->min_height = supported_modes[fsize->index].height;
> > > > > fsize->max_height = fsize->min_height;
> > > > >
> > > > > return 0;
> > > > > @@ -553,7 +759,7 @@ static void imx334_fill_pad_format(struct
> > > > > imx334 *imx334, {
> > > > > fmt->format.width = mode->width;
> > > > > fmt->format.height = mode->height;
> > > > > - fmt->format.code = mode->code;
> > > > > + fmt->format.code = imx334->cur_code;
> > > > > fmt->format.field = V4L2_FIELD_NONE;
> > > > > fmt->format.colorspace = V4L2_COLORSPACE_RAW;
> > > > > fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; @@ -591,6
> > > > > +797,18 @@ static int imx334_get_pad_format(struct v4l2_subdev
> > > > > +*sd,
> > > > > return 0;
> > > > > }
> > > > >
> > > > > +static int imx219_get_format_code(struct imx334 *imx334, struct
> > > > > +v4l2_subdev_format *fmt) {
> > > > > + int i;
> > > > > +
> > > > > + for (i = 0; i < ARRAY_SIZE(codes); i++) {
> > > >
> > > > Ditto, unsigned int and possibily declared inside the for loop
> > > >
> > > > > + if (codes[i] == fmt->format.code)
> > > > > + return codes[i];
> > > > > + }
> > > > > +
> > > > > + return -EINVAL;
> > > > > +}
> > > > > +
> > > > > /**
> > > > > * imx334_set_pad_format() - Set subdevice pad format
> > > > > * @sd: pointer to imx334 V4L2 sub-device structure @@ -606,10
> > > > > +824,21 @@ static int imx334_set_pad_format(struct v4l2_subdev
> > > > > +*sd,
> > > > > struct imx334 *imx334 = to_imx334(sd);
> > > > > const struct imx334_mode *mode;
> > > > > int ret = 0;
> > > > > + u32 code;
> > > > >
> > > > > mutex_lock(&imx334->mutex);
> > > > >
> > > > > - mode = &supported_mode;
> > > > > + code = imx219_get_format_code(imx334, fmt);
> > > > > + if (code < 0)
> > > > > + return -EINVAL;
> > > > > +
> > > > > + imx334->cur_code = code;
> > > > > +
> > > > > + mode = v4l2_find_nearest_size(supported_modes,
> > > > > + ARRAY_SIZE(supported_modes),
> > > > > + width, height,
> > > > > + fmt->format.width,
> > > > > + fmt->format.height);
> > > > > +
> > > > > imx334_fill_pad_format(imx334, mode, fmt);
> > > > >
> > > > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { @@ -617,7 +846,7
> > > > @@
> > > > > static int imx334_set_pad_format(struct v4l2_subdev *sd,
> > > > >
> > > > > framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt-
> > >pad);
> > > > > *framefmt = fmt->format;
> > > > > - } else {
> > > > > + } else if (imx334->cur_mode != mode) {
> > > >
> > > > Is this change related ? I think it's good as it avoids an
> > > > unecessary update of the controls, but maybe it's not related to this
> > patch ?
> > >
> > > I have updated mode[] array new set of value, Insated of calling
> > > functions simply.
> > > Just added a check the the mode changed then only we need to updated
> > > other parameters Same as imx219 code
> >
> > You're right, we had a single mode before this change :)
> >
> > >
> > > Thanks,
> > > Shravan
> > >
> > > >
> > > > Thanks
> > > > j
> > > >
> > > > > ret = imx334_update_controls(imx334, mode);
> > > > > if (!ret)
> > > > > imx334->cur_mode = mode; @@ -642,11 +871,26
> > > > > @@ static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
> > > > > struct v4l2_subdev_format fmt = { 0 };
> > > > >
> > > > > fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY :
> > > > V4L2_SUBDEV_FORMAT_ACTIVE;
> > > > > - imx334_fill_pad_format(imx334, &supported_mode, &fmt);
> > > > > + imx334_fill_pad_format(imx334, &supported_modes[1], &fmt);
> > > > >
> > > > > return imx334_set_pad_format(sd, sd_state, &fmt); }
> > > > >
> > > > > +static int imx334_set_framefmt(struct imx334 *imx334) {
> > > > > + switch (imx334->cur_code) {
> > > > > + case MEDIA_BUS_FMT_SRGGB10_1X10:
> > > > > + return imx334_write_regs(imx334,
> > > > > +raw10_framefmt_regs,
> > > > > +
> > > > > +ARRAY_SIZE(raw10_framefmt_regs));
> > > > > +
> > > > > + case MEDIA_BUS_FMT_SRGGB12_1X12:
> > > > > + return imx334_write_regs(imx334, raw12_framefmt_regs,
> > > > > + ARRAY_SIZE(raw12_framefmt_regs));
> > > > > + }
> > > > > +
> > > > > + return -EINVAL;
> > > > > +}
> > > > > +
> > > > > /**
> > > > > * imx334_start_streaming() - Start sensor stream
> > > > > * @imx334: pointer to imx334 device @@ -667,6 +911,13 @@ static
> > > > > int imx334_start_streaming(struct imx334
> > > > *imx334)
> > > > > return ret;
> > > > > }
> > > > >
> > > > > + ret = imx334_set_framefmt(imx334);
> > > > > + if (ret) {
> > > > > + dev_err(imx334->dev, "%s failed to set frame format: %d\n",
> > > > > + __func__, ret);
> > > > > + return ret;
> > > > > + }
> > > > > +
> > > > > /* Setup handler will write actual exposure and gain */
> > > > > ret = __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler);
> > > > > if (ret) {
> > > > > @@ -1037,7 +1288,8 @@ static int imx334_probe(struct i2c_client
> > *client)
> > > > > }
> > > > >
> > > > > /* Set default mode to max resolution */
> > > > > - imx334->cur_mode = &supported_mode;
> > > > > + imx334->cur_mode = &supported_modes[1];
> > > > > + imx334->cur_code = codes[1];
> > > > > imx334->vblank = imx334->cur_mode->vblank;
> > > > >
> > > > > ret = imx334_init_controls(imx334);
> > > > > --
> > > > > 2.17.1
> > > > >