From: Nikita Travkin <[email protected]>
Both a2015 devices use motor drivers controlled with PWM signal.
A5 additionally has a fixed regulator that powers the driver and is
controlled by enable signal. A3 routes that enable signal to the
motor driver itself.
To simplify the description, add the motor to the common dtsi and
assume a regulator is used for both.
Signed-off-by: Nikita Travkin <[email protected]>
[Rename the nodes to be reusable in msm8916-sansung-e2015]
Signed-off-by: Lin, Meng-Bo <[email protected]>
---
.../qcom/msm8916-samsung-a2015-common.dtsi | 52 +++++++++++++++++++
.../boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 8 +++
.../boot/dts/qcom/msm8916-samsung-a5u-eur.dts | 8 +++
.../qcom/msm8916-samsung-e2015-common.dtsi | 26 ++--------
4 files changed, 73 insertions(+), 21 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 3255bd3fcb55..16935de738af 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -23,6 +23,17 @@ tz-apps@85500000 {
};
};
+ clk_pwm: pwm {
+ compatible = "clk-pwm";
+ #pwm-cells = <2>;
+
+ clocks = <&gcc GCC_GP2_CLK>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&motor_pwm_default>;
+ status = "disabled";
+ };
+
gpio-keys {
compatible = "gpio-keys";
@@ -61,6 +72,24 @@ event-hall-sensor {
};
};
+ /*
+ * NOTE: A5 connects GPIO 76 to a reglator powering the motor
+ * driver IC but A3 connects the same signal to an ENABLE pin of
+ * the driver.
+ */
+ reg_motor_vdd: regulator-motor-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "motor_vdd";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&motor_en_default>;
+ };
+
reg_vdd_tsp_a: regulator-vdd-tsp-a {
compatible = "regulator-fixed";
regulator-name = "vdd_tsp_a";
@@ -153,6 +182,16 @@ nfc@27 {
pinctrl-0 = <&nfc_default &nfc_clk_req>;
};
};
+
+ vibrator: vibrator {
+ compatible = "pwm-vibrator";
+
+ pwms = <&clk_pwm 0 100000>;
+ pwm-names = "enable";
+
+ vcc-supply = <®_motor_vdd>;
+ status = "disabled";
+ };
};
&blsp_i2c2 {
@@ -397,6 +436,19 @@ mdss_sleep: mdss-sleep {
};
};
+ motor_en_default: motor-en-default {
+ pins = "gpio76";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ motor_pwm_default: motor-pwm-default {
+ pins = "gpio50";
+ function = "gcc_gp2_clk_a";
+ };
+
muic_i2c_default: muic-i2c-default {
pins = "gpio105", "gpio106";
function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index 6db5f78ca286..d495d5ae5cc3 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -81,6 +81,10 @@ touchscreen@20 {
};
};
+&clk_pwm {
+ status = "okay";
+};
+
&dsi0 {
panel@0 {
reg = <0>;
@@ -104,6 +108,10 @@ &dsi0_out {
remote-endpoint = <&panel_in>;
};
+&vibrator {
+ status = "okay";
+};
+
&msmgpio {
panel_vdd3_default: panel-vdd3-default {
pins = "gpio9";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
index 5fb8ecd0c9ca..c03504ab27b7 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -50,6 +50,10 @@ touchscreen@48 {
};
};
+&clk_pwm {
+ status = "okay";
+};
+
&pronto {
iris {
compatible = "qcom,wcn3660b";
@@ -61,6 +65,10 @@ &touchkey {
vdd-supply = <®_touch_key>;
};
+&vibrator {
+ status = "okay";
+};
+
&msmgpio {
tkey_en_default: tkey-en-default {
pins = "gpio97";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
index 542010fdfb8a..edd24b597a15 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
@@ -26,19 +26,6 @@ muic: extcon@14 {
};
};
- reg_motor_vdd: regulator-motor-vdd {
- compatible = "regulator-fixed";
- regulator-name = "motor_vdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&motor_en_default>;
- };
-
reg_touch_key: regulator-touch-key {
compatible = "regulator-fixed";
regulator-name = "touch_key";
@@ -61,20 +48,17 @@ &blsp_i2c2 {
/delete-node/ magnetometer@12;
};
+®_motor_vdd {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
+
&touchkey {
vcc-supply = <®_touch_key>;
vdd-supply = <®_touch_key>;
};
&msmgpio {
- motor_en_default: motor-en-default {
- pins = "gpio76";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
tkey_en_default: tkey-en-default {
pins = "gpio97";
function = "gpio";
--
2.30.2