Add board file for the RK3588s Rock 5A board. While the hardware
offers plenty of peripherals and connectivity this basic implementation
just handles things required to access eMMC, UART and Ethernet (i.e.
enough to successfully boot Linux).
Tested-by: Benjamin Gaignard <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
---
.../devicetree/bindings/arm/rockchip.yaml | 5 ++
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3588s-rock-5a.dts | 63 +++++++++++++++++++
3 files changed, 69 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 4230881371fa..6bff4c42d815 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -744,6 +744,11 @@ properties:
- const: rockchip,rk3588-evb1-v10
- const: rockchip,rk3588
+ - description: Radxa Rock 5A
+ items:
+ - const: radxa,rock-5a
+ - const: rockchip,rk3588s
+
additionalProperties: true
...
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 12ed53de11eb..31fa55750a0f 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -73,3 +73,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
new file mode 100644
index 000000000000..25387a000341
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "rk3588s.dtsi"
+
+/ {
+ model = "Radxa Rock 5A Board";
+ compatible = "radxa,rock-5a", "rockchip,rk3588s";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&gmac1 {
+ phy-mode = "rgmii-rxid";
+ clock_in_out = "output";
+
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ /* Reset time is 20ms, 100ms for rtl8211f */
+ snps,reset-delays-us = <0 20000 100000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_miim
+ &gmac1_tx_bus2
+ &gmac1_rx_bus2
+ &gmac1_rgmii_clk
+ &gmac1_rgmii_bus>;
+
+ tx_delay = <0x3a>;
+ rx_delay = <0x3e>;
+
+ phy-handle = <&rgmii_phy1>;
+ status = "okay";
+};
+
+&mdio1 {
+ rgmii_phy1: phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ #phy-cells = <0>;
+ };
+};
+
+&sdhci {
+ bus-width = <8>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
--
2.35.1
Hi Sebastian,
On 11/8/22 18:15, Sebastian Reichel wrote:
> Add board file for the RK3588s Rock 5A board. While the hardware
> offers plenty of peripherals and connectivity this basic implementation
> just handles things required to access eMMC, UART and Ethernet (i.e.
> enough to successfully boot Linux).
>
> Tested-by: Benjamin Gaignard <[email protected]>
> Signed-off-by: Sebastian Reichel <[email protected]>
> ---
> .../devicetree/bindings/arm/rockchip.yaml | 5 ++
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3588s-rock-5a.dts | 63 +++++++++++++++++++
> 3 files changed, 69 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
> index 4230881371fa..6bff4c42d815 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
> @@ -744,6 +744,11 @@ properties:
> - const: rockchip,rk3588-evb1-v10
> - const: rockchip,rk3588
>
> + - description: Radxa Rock 5A
> + items:
> + - const: radxa,rock-5a
FYI: I was wondering what the convention was when I submitted the
rk3568-rock-3a.dts. There are boards with the compatible
"radxa,rockpi4a", "radxa,rockpi4b", "radxa,rockpis", but also the
"radxa,rock-4c-plus". I went with the slight majority and named it
"radxa,rock3a". Maybe you would like to consider "radxa,rock5a" in order
to follow suit.
Best regards,
Michael
> + - const: rockchip,rk3588s
> +
> additionalProperties: true
>
> ...
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 12ed53de11eb..31fa55750a0f 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -73,3 +73,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> new file mode 100644
> index 000000000000..25387a000341
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> @@ -0,0 +1,63 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include "rk3588s.dtsi"
> +
> +/ {
> + model = "Radxa Rock 5A Board";
> + compatible = "radxa,rock-5a", "rockchip,rk3588s";
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +};
> +
> +&gmac1 {
> + phy-mode = "rgmii-rxid";
> + clock_in_out = "output";
> +
> + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> + snps,reset-active-low;
> + /* Reset time is 20ms, 100ms for rtl8211f */
> + snps,reset-delays-us = <0 20000 100000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&gmac1_miim
> + &gmac1_tx_bus2
> + &gmac1_rx_bus2
> + &gmac1_rgmii_clk
> + &gmac1_rgmii_bus>;
> +
> + tx_delay = <0x3a>;
> + rx_delay = <0x3e>;
> +
> + phy-handle = <&rgmii_phy1>;
> + status = "okay";
> +};
> +
> +&mdio1 {
> + rgmii_phy1: phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1>;
> + #phy-cells = <0>;
> + };
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + no-sdio;
> + no-sd;
> + non-removable;
> + max-frequency = <200000000>;
> + mmc-hs400-1_8v;
> + mmc-hs400-enhanced-strobe;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-0 = <&uart2m0_xfer>;
> + status = "okay";
> +};
On 11/9/22 17:16, Michael Riesch wrote:
> Hi Sebastian,
>
> On 11/8/22 18:15, Sebastian Reichel wrote:
>> Add board file for the RK3588s Rock 5A board. While the hardware
>> offers plenty of peripherals and connectivity this basic implementation
>> just handles things required to access eMMC, UART and Ethernet (i.e.
>> enough to successfully boot Linux).
>>
>> Tested-by: Benjamin Gaignard <[email protected]>
>> Signed-off-by: Sebastian Reichel <[email protected]>
>> ---
>> .../devicetree/bindings/arm/rockchip.yaml | 5 ++
>> arch/arm64/boot/dts/rockchip/Makefile | 1 +
>> .../boot/dts/rockchip/rk3588s-rock-5a.dts | 63 +++++++++++++++++++
>> 3 files changed, 69 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
>>
>> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
>> index 4230881371fa..6bff4c42d815 100644
>> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
>> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
>> @@ -744,6 +744,11 @@ properties:
>> - const: rockchip,rk3588-evb1-v10
>> - const: rockchip,rk3588
>>
>> + - description: Radxa Rock 5A
Please change to "Radxa ROCK 5 Model A". This is the full product name
per our naming convention.
>> + items:
>> + - const: radxa,rock-5a
>
> FYI: I was wondering what the convention was when I submitted the
> rk3568-rock-3a.dts. There are boards with the compatible
> "radxa,rockpi4a", "radxa,rockpi4b", "radxa,rockpis", but also the
> "radxa,rock-4c-plus". I went with the slight majority and named it
> "radxa,rock3a". Maybe you would like to consider "radxa,rock5a" in order
> to follow suit.
Currently we keep the compatible field to match the file name excluding
the SoC prefix, since that seems to be what other boards are doing (ex.
odroid-go2, nanopi-r2s, orion-r68-meta, etc). I'll say `rock-5a` looks
good to me.
>
> Best regards,
> Michael
>
>> + - const: rockchip,rk3588s
>> +
>> additionalProperties: true
>>
>> ...
>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
>> index 12ed53de11eb..31fa55750a0f 100644
>> --- a/arch/arm64/boot/dts/rockchip/Makefile
>> +++ b/arch/arm64/boot/dts/rockchip/Makefile
>> @@ -73,3 +73,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
>> new file mode 100644
>> index 000000000000..25387a000341
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
>> @@ -0,0 +1,63 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/pinctrl/rockchip.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include "rk3588s.dtsi"
>> +
>> +/ {
>> + model = "Radxa Rock 5A Board";
>> + compatible = "radxa,rock-5a", "rockchip,rk3588s";
>> +
>> + chosen {
>> + stdout-path = "serial2:1500000n8";
>> + };
>> +};
>> +
>> +&gmac1 {
>> + phy-mode = "rgmii-rxid";
>> + clock_in_out = "output";
>> +
>> + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
>> + snps,reset-active-low;
>> + /* Reset time is 20ms, 100ms for rtl8211f */
>> + snps,reset-delays-us = <0 20000 100000>;
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&gmac1_miim
>> + &gmac1_tx_bus2
>> + &gmac1_rx_bus2
>> + &gmac1_rgmii_clk
>> + &gmac1_rgmii_bus>;
>> +
>> + tx_delay = <0x3a>;
>> + rx_delay = <0x3e>;
>> +
>> + phy-handle = <&rgmii_phy1>;
>> + status = "okay";
>> +};
>> +
>> +&mdio1 {
>> + rgmii_phy1: phy@1 {
>> + compatible = "ethernet-phy-ieee802.3-c22";
>> + reg = <0x1>;
>> + #phy-cells = <0>;
>> + };
>> +};
>> +
>> +&sdhci {
>> + bus-width = <8>;
>> + no-sdio;
>> + no-sd;
>> + non-removable;
>> + max-frequency = <200000000>;
>> + mmc-hs400-1_8v;
>> + mmc-hs400-enhanced-strobe;
>> + status = "okay";
>> +};
>> +
>> +&uart2 {
>> + pinctrl-0 = <&uart2m0_xfer>;
>> + status = "okay";
>> +};
>
> _______________________________________________
> Linux-rockchip mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
--
Best regards,
ZHANG Yuntian
Operating System Developer
Radxa Computer Co., Ltd
Shenzhen, China