From: Marcel Ziswiler <[email protected]>
Add PCIe support on the Verdin iMX8M Plus.
Signed-off-by: Marcel Ziswiler <[email protected]>
---
This has successfully been tested with Lucas' imx8mp-hsio-blk-ctrl high
performance PLL clock exposure patch set [1] a later version thereof
hopefully may land together with my humble patch. Thanks!
[1] https://lore.kernel.org/all/[email protected]/
.../dts/freescale/imx8mp-verdin-dahlia.dtsi | 9 +++++++-
.../boot/dts/freescale/imx8mp-verdin.dtsi | 22 ++++++++++++++++++-
2 files changed, 29 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
index 80db1ad7c230..56b0e4b865c9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -67,7 +67,14 @@ &i2c4 {
/* TODO: Audio Codec */
};
-/* TODO: Verdin PCIE_1 */
+/* Verdin PCIE_1 */
+&pcie {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
/* Verdin PWM_1 */
&pwm1 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index 6a1890a4b5d8..f3a46f4caf49 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -749,7 +749,27 @@ eeprom_carrier_board: eeprom@57 {
};
};
-/* TODO: Verdin PCIE_1 */
+/* Verdin PCIE_1 */
+&pcie {
+ assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+ assigned-clock-rates = <10000000>;
+ clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+ <&clk IMX8MP_CLK_PCIE_ROOT>,
+ <&clk IMX8MP_CLK_HSIO_AXI>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ /* PCIE_1_RESET# (SODIMM 244) */
+ reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+ clocks = <&hsio_blk_ctrl>;
+ clock-names = "ref";
+ fsl,clkreq-unsupported;
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+};
/* Verdin PWM_1 */
&pwm1 {
--
2.36.1
Hi Marcel,
Thank you for your humble patch ;-)
On Wed, Dec 14, 2022 at 07:13:54AM +0100, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <[email protected]>
>
> Add PCIe support on the Verdin iMX8M Plus.
>
> Signed-off-by: Marcel Ziswiler <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
> ---
> This has successfully been tested with Lucas' imx8mp-hsio-blk-ctrl high
> performance PLL clock exposure patch set [1] a later version thereof
> hopefully may land together with my humble patch. Thanks!
>
> [1] https://lore.kernel.org/all/[email protected]/
>
> .../dts/freescale/imx8mp-verdin-dahlia.dtsi | 9 +++++++-
> .../boot/dts/freescale/imx8mp-verdin.dtsi | 22 ++++++++++++++++++-
> 2 files changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
> index 80db1ad7c230..56b0e4b865c9 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
> @@ -67,7 +67,14 @@ &i2c4 {
> /* TODO: Audio Codec */
> };
>
> -/* TODO: Verdin PCIE_1 */
> +/* Verdin PCIE_1 */
> +&pcie {
> + status = "okay";
> +};
> +
> +&pcie_phy {
> + status = "okay";
> +};
>
> /* Verdin PWM_1 */
> &pwm1 {
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> index 6a1890a4b5d8..f3a46f4caf49 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> @@ -749,7 +749,27 @@ eeprom_carrier_board: eeprom@57 {
> };
> };
>
> -/* TODO: Verdin PCIE_1 */
> +/* Verdin PCIE_1 */
> +&pcie {
> + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
> + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
> + assigned-clock-rates = <10000000>;
> + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
> + <&clk IMX8MP_CLK_PCIE_ROOT>,
> + <&clk IMX8MP_CLK_HSIO_AXI>;
> + clock-names = "pcie", "pcie_aux", "pcie_bus";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie>;
> + /* PCIE_1_RESET# (SODIMM 244) */
> + reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
> +};
> +
> +&pcie_phy {
> + clocks = <&hsio_blk_ctrl>;
> + clock-names = "ref";
> + fsl,clkreq-unsupported;
> + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
> +};
>
> /* Verdin PWM_1 */
> &pwm1 {
--
Regards,
Laurent Pinchart
Hi Marcel,
Am Mittwoch, dem 14.12.2022 um 07:13 +0100 schrieb Marcel Ziswiler:
> From: Marcel Ziswiler <[email protected]>
>
> Add PCIe support on the Verdin iMX8M Plus.
>
> Signed-off-by: Marcel Ziswiler <[email protected]>
>
> ---
> This has successfully been tested with Lucas' imx8mp-hsio-blk-ctrl high
> performance PLL clock exposure patch set [1] a later version thereof
> hopefully may land together with my humble patch. Thanks!
>
> [1] https://lore.kernel.org/all/[email protected]/
>
> .../dts/freescale/imx8mp-verdin-dahlia.dtsi | 9 +++++++-
> .../boot/dts/freescale/imx8mp-verdin.dtsi | 22 ++++++++++++++++++-
> 2 files changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
> index 80db1ad7c230..56b0e4b865c9 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
> @@ -67,7 +67,14 @@ &i2c4 {
> /* TODO: Audio Codec */
> };
>
> -/* TODO: Verdin PCIE_1 */
> +/* Verdin PCIE_1 */
> +&pcie {
> + status = "okay";
> +};
> +
> +&pcie_phy {
> + status = "okay";
> +};
>
> /* Verdin PWM_1 */
> &pwm1 {
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> index 6a1890a4b5d8..f3a46f4caf49 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> @@ -749,7 +749,27 @@ eeprom_carrier_board: eeprom@57 {
> };
> };
>
> -/* TODO: Verdin PCIE_1 */
> +/* Verdin PCIE_1 */
> +&pcie {
> + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
> + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
> + assigned-clock-rates = <10000000>;
> + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
> + <&clk IMX8MP_CLK_PCIE_ROOT>,
> + <&clk IMX8MP_CLK_HSIO_AXI>;
> + clock-names = "pcie", "pcie_aux", "pcie_bus";
Now that I see this, I realize that those clocks and assignments could
move into imx8mp.dtsi. I doubt that anyone would want to configure
those clocks in a different way. The real difference between boards is
the PCIe PHY reference clock and those differences are fully contained
in the PHY node.
Regards,
Lucas
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie>;
> + /* PCIE_1_RESET# (SODIMM 244) */
> + reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
> +};
> +
> +&pcie_phy {
> + clocks = <&hsio_blk_ctrl>;
> + clock-names = "ref";
> + fsl,clkreq-unsupported;
> + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
> +};
>
> /* Verdin PWM_1 */
> &pwm1 {