This series adds support for the subject NAND chip, found in an
Allwinner A33 tablet, which appears to be a slightly newer revision of
the already-supported H27UCG8T2ETR-BC.
I initially tried declaring the chip with the number of pages from the
datasheet, but it appears the NAND core only supports power-of-two page
counts. I made a change which works for me, but I am marking it as RFC
because I am unsure of any other impacts of this change.
Samuel Holland (3):
mtd: rawnand: hynix: Add support for H27UCG8T2FTR-BC MLC NAND
mtd: rawnand: Support non-power-of-two chip sizes
mtd: rawnand: hynix: Expose the full H27UCG8T2FTR-BC chip size
drivers/mtd/nand/raw/nand_base.c | 14 +++++---------
drivers/mtd/nand/raw/nand_hynix.c | 4 ++++
drivers/mtd/nand/raw/nand_ids.c | 4 ++++
3 files changed, 13 insertions(+), 9 deletions(-)
--
2.37.4