Hi Rafael,
please consider pulling:
The following changes since commit 3a151494dc04c76add577ae66e8a04f900638aaf:
thermal/drivers/armada: Use strscpy() to instead of strncpy()
(2023-01-06 14:14:48 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
tags/thermal-v6.3-rc1
for you to fetch changes up to 8c5ee9155f8ae133070b40ee4be03cafb35c188d:
thermal/drivers/armada: Use the thermal_zone_get_crit_temp()
(2023-01-24 12:37:56 +0100)
----------------------------------------------------------------
- Fix kerneldoc format errors for Rockchip, Mediatek and Uniphier
(Randy Dunlap)
- Add the missing 'qcom,adc-tm7' compatible string in the dt-bindings
(Krzysztof Kozlowski)
- Improve the calibration routine by relying on the nvmem to read the
values and provide a set of fixes for the QCom tsens driver (Dmitry
Baryshkov)
- Remove the duplicate interrupt setting routine in the QCom tsens
driver (Daniel Lezcano)
- Fix a wrong loop condition in the i.MX SC thermal driver and add the
iMX8QM sensors (Viorel Suman)
- Fix header inclusion asm-generic.h by asm.h for the
qcom-spmi-adc-tm5 driver (Andy Shevchenko)
- Use the devm_platform_get_and_ioremap_resource() combo function in
all the drivers where the conversion applies (Ye Xingchen)
- Replace a literal mask by an existing corresponding macro (Yangtao
Li)
- Add support for MT7986 and MT7981 (Daniel Golle)
- Use thermal_zone_get_crit_temp() for the Armada thermal driver
(Daniel Lezcano)
----------------------------------------------------------------
Andy Shevchenko (1):
thermal/drivers/qcom-spmi-adc-tm5: Use asm intead of asm-generic
Daniel Golle (2):
thermal/drivers/mtk: Use function pointer for raw_to_mcelsius
thermal/drivers/mtk: Add support for MT7986 and MT7981
Daniel Lezcano (2):
thermal/drivers/qcom: Remove duplicate set next trip point
interrupt code
thermal/drivers/armada: Use the thermal_zone_get_crit_temp()
Dmitry Baryshkov (14):
dt-bindings: thermal: tsens: add msm8956 compat
dt-bindings: thermal: tsens: support per-sensor calibration cells
dt-bindings: thermal: tsens: add per-sensor cells for msm8974
thermal/drivers/tsens: Drop unnecessary hw_ids
thermal/drivers/tsens: Drop msm8976-specific defines
thermal/drivers/tsens: Sort out msm8976 vs msm8956 data
thermal/drivers/tsens: fix slope values for msm8939
thermal/drivers/tsens: limit num_sensors to 9 for msm8939
thermal/drivers/tsens: Support using nvmem cells for calibration data
thermal/drivers/tsens: Support using nvmem cells for msm8974
calibration
thermal/drivers/tsens: Rework legacy calibration data parsers
thermal/drivers/tsens: Drop single-cell code for mdm9607
thermal/drivers/tsens: Drop single-cell code for msm8939
thermal/drivers/tsens: Drop single-cell code for msm8976/msm8956
Krzysztof Kozlowski (1):
dt-bindings: thermal: qcom-spmi-adc-tm5: add qcom,adc-tm7
Rafael J. Wysocki (1):
Merge tag 'generic-trip-point' of
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Randy Dunlap (3):
thermal/drivers/mtk_thermal: Fix kernel-doc function name
thermal/drivers/rockchip: Fix kernel-doc warnings
thermal/drivers/uniphier: Use regular comment syntax
Viorel Suman (2):
thermal/drivers/imx_sc_thermal: Fix the loop condition
thermal/drivers/imx_sc_thermal: Add iMX8QM sensors
Yangtao Li (1):
thermal/drivers/sun8i: Convert to use macro
ye xingchen (9):
thermal/drivers/brcmstb_thermal: Use
devm_platform_get_and_ioremap_resource()
thermal/drivers/bcm2835: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/dove: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/armada: Use devm_platform_get_and_ioremap_resource()
thermal/drivers/mtk_thermal: Use
devm_platform_get_and_ioremap_resource()
thermal/drivers/rockchip: Use
devm_platform_get_and_ioremap_resource()
thermal/drivers/thermal_mmio: Use
devm_platform_get_and_ioremap_resource()
thermal/drivers/kirkwood: Use
devm_platform_get_and_ioremap_resource()
thermal/drivers/spear: Use devm_platform_get_and_ioremap_resource()
.../bindings/thermal/qcom-spmi-adc-tm5.yaml | 1 +
.../devicetree/bindings/thermal/qcom-tsens.yaml | 153 ++++-
drivers/thermal/armada_thermal.c | 42 +-
drivers/thermal/broadcom/bcm2835_thermal.c | 4 +-
drivers/thermal/broadcom/brcmstb_thermal.c | 4 +-
drivers/thermal/dove_thermal.c | 7 +-
drivers/thermal/imx_sc_thermal.c | 8 +-
drivers/thermal/kirkwood_thermal.c | 4 +-
drivers/thermal/mtk_thermal.c | 149 ++++-
drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 3 +-
drivers/thermal/qcom/tsens-v0_1.c | 655
++++++---------------
drivers/thermal/qcom/tsens-v1.c | 340 +++--------
drivers/thermal/qcom/tsens.c | 219 +++++--
drivers/thermal/qcom/tsens.h | 46 +-
drivers/thermal/rockchip_thermal.c | 10 +-
drivers/thermal/spear_thermal.c | 4 +-
drivers/thermal/sun8i_thermal.c | 4 +-
drivers/thermal/thermal_mmio.c | 4 +-
drivers/thermal/uniphier_thermal.c | 2 +-
19 files changed, 800 insertions(+), 859 deletions(-)
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
On Thu, Jan 26, 2023 at 5:19 PM Daniel Lezcano
<[email protected]> wrote:
>
> Hi Rafael,
>
> please consider pulling:
>
> The following changes since commit 3a151494dc04c76add577ae66e8a04f900638aaf:
>
> thermal/drivers/armada: Use strscpy() to instead of strncpy()
> (2023-01-06 14:14:48 +0100)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
> tags/thermal-v6.3-rc1
>
> for you to fetch changes up to 8c5ee9155f8ae133070b40ee4be03cafb35c188d:
>
> thermal/drivers/armada: Use the thermal_zone_get_crit_temp()
> (2023-01-24 12:37:56 +0100)
>
> ----------------------------------------------------------------
> - Fix kerneldoc format errors for Rockchip, Mediatek and Uniphier
> (Randy Dunlap)
>
> - Add the missing 'qcom,adc-tm7' compatible string in the dt-bindings
> (Krzysztof Kozlowski)
>
> - Improve the calibration routine by relying on the nvmem to read the
> values and provide a set of fixes for the QCom tsens driver (Dmitry
> Baryshkov)
>
> - Remove the duplicate interrupt setting routine in the QCom tsens
> driver (Daniel Lezcano)
>
> - Fix a wrong loop condition in the i.MX SC thermal driver and add the
> iMX8QM sensors (Viorel Suman)
>
> - Fix header inclusion asm-generic.h by asm.h for the
> qcom-spmi-adc-tm5 driver (Andy Shevchenko)
>
> - Use the devm_platform_get_and_ioremap_resource() combo function in
> all the drivers where the conversion applies (Ye Xingchen)
>
> - Replace a literal mask by an existing corresponding macro (Yangtao
> Li)
>
> - Add support for MT7986 and MT7981 (Daniel Golle)
>
> - Use thermal_zone_get_crit_temp() for the Armada thermal driver
> (Daniel Lezcano)
>
> ----------------------------------------------------------------
> Andy Shevchenko (1):
> thermal/drivers/qcom-spmi-adc-tm5: Use asm intead of asm-generic
>
> Daniel Golle (2):
> thermal/drivers/mtk: Use function pointer for raw_to_mcelsius
> thermal/drivers/mtk: Add support for MT7986 and MT7981
>
> Daniel Lezcano (2):
> thermal/drivers/qcom: Remove duplicate set next trip point
> interrupt code
> thermal/drivers/armada: Use the thermal_zone_get_crit_temp()
>
> Dmitry Baryshkov (14):
> dt-bindings: thermal: tsens: add msm8956 compat
> dt-bindings: thermal: tsens: support per-sensor calibration cells
> dt-bindings: thermal: tsens: add per-sensor cells for msm8974
> thermal/drivers/tsens: Drop unnecessary hw_ids
> thermal/drivers/tsens: Drop msm8976-specific defines
> thermal/drivers/tsens: Sort out msm8976 vs msm8956 data
> thermal/drivers/tsens: fix slope values for msm8939
> thermal/drivers/tsens: limit num_sensors to 9 for msm8939
> thermal/drivers/tsens: Support using nvmem cells for calibration data
> thermal/drivers/tsens: Support using nvmem cells for msm8974
> calibration
> thermal/drivers/tsens: Rework legacy calibration data parsers
> thermal/drivers/tsens: Drop single-cell code for mdm9607
> thermal/drivers/tsens: Drop single-cell code for msm8939
> thermal/drivers/tsens: Drop single-cell code for msm8976/msm8956
>
> Krzysztof Kozlowski (1):
> dt-bindings: thermal: qcom-spmi-adc-tm5: add qcom,adc-tm7
>
> Rafael J. Wysocki (1):
> Merge tag 'generic-trip-point' of
> ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
>
> Randy Dunlap (3):
> thermal/drivers/mtk_thermal: Fix kernel-doc function name
> thermal/drivers/rockchip: Fix kernel-doc warnings
> thermal/drivers/uniphier: Use regular comment syntax
>
> Viorel Suman (2):
> thermal/drivers/imx_sc_thermal: Fix the loop condition
> thermal/drivers/imx_sc_thermal: Add iMX8QM sensors
>
> Yangtao Li (1):
> thermal/drivers/sun8i: Convert to use macro
>
> ye xingchen (9):
> thermal/drivers/brcmstb_thermal: Use
> devm_platform_get_and_ioremap_resource()
> thermal/drivers/bcm2835: Use devm_platform_get_and_ioremap_resource()
> thermal/drivers/dove: Use devm_platform_get_and_ioremap_resource()
> thermal/drivers/armada: Use devm_platform_get_and_ioremap_resource()
> thermal/drivers/mtk_thermal: Use
> devm_platform_get_and_ioremap_resource()
> thermal/drivers/rockchip: Use
> devm_platform_get_and_ioremap_resource()
> thermal/drivers/thermal_mmio: Use
> devm_platform_get_and_ioremap_resource()
> thermal/drivers/kirkwood: Use
> devm_platform_get_and_ioremap_resource()
> thermal/drivers/spear: Use devm_platform_get_and_ioremap_resource()
>
> .../bindings/thermal/qcom-spmi-adc-tm5.yaml | 1 +
> .../devicetree/bindings/thermal/qcom-tsens.yaml | 153 ++++-
> drivers/thermal/armada_thermal.c | 42 +-
> drivers/thermal/broadcom/bcm2835_thermal.c | 4 +-
> drivers/thermal/broadcom/brcmstb_thermal.c | 4 +-
> drivers/thermal/dove_thermal.c | 7 +-
> drivers/thermal/imx_sc_thermal.c | 8 +-
> drivers/thermal/kirkwood_thermal.c | 4 +-
> drivers/thermal/mtk_thermal.c | 149 ++++-
> drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 3 +-
> drivers/thermal/qcom/tsens-v0_1.c | 655
> ++++++---------------
> drivers/thermal/qcom/tsens-v1.c | 340 +++--------
> drivers/thermal/qcom/tsens.c | 219 +++++--
> drivers/thermal/qcom/tsens.h | 46 +-
> drivers/thermal/rockchip_thermal.c | 10 +-
> drivers/thermal/spear_thermal.c | 4 +-
> drivers/thermal/sun8i_thermal.c | 4 +-
> drivers/thermal/thermal_mmio.c | 4 +-
> drivers/thermal/uniphier_thermal.c | 2 +-
> 19 files changed, 800 insertions(+), 859 deletions(-)
>
> --
Pulled pushed into the linux-next branch in linux-pm.git.
If all goes well, I'll merge it into thermal on Monday.
Thanks!