Create tas2781.yaml for tas2781 driver.
Signed-off-by: Shenghao Ding <[email protected]>
---
Changes in v3:
- Add allOf with ref to saound-dai-common
- remove audio-slots, put all the i2c address into <reg>
- Add more description on broadcast-addr item
Changes to be committed:
new file: Documentation/devicetree/bindings/sound/ti,tas2781.yaml
---
.../devicetree/bindings/sound/ti,tas2781.yaml | 83 +++++++++++++++++++
1 file changed, 83 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml
diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
new file mode 100644
index 000000000000..c4928e88f1c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 - 2023 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TAS2781 SmartAMP
+
+maintainers:
+ - Shenghao Ding <[email protected]>
+
+description:
+ The TAS2781 is a mono, digital input Class-D audio amplifier
+ optimized for efficiently driving high peak power into small
+ loudspeakers. Integrated an on-chip DSP supports Texas Instruments
+ Smart Amp speaker protection algorithm. The integrated speaker
+ voltage and current sense provides for real time
+ monitoring of loudspeaker behavior.
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,tas2781
+
+ reg:
+ description:
+ I2C address, in multiple tas2781s case, all the i2c address
+ aggreate as one Audio Device to support multiple audio slots.
+ maxItems: 4
+ items:
+ minimum: 0x38
+ maximum: 0x3f
+
+ reset-gpios:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ti,broadcast-addr:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Generic I2C address for all the tas2781 devices in
+ purpose of I2C broadcast during the multi-device
+ writes, useless in mono case or remove this item to
+ disable broadcast mode.
+
+ '#sound-dai-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ /* example with quad support, such as tablet or pad device */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ quad: codec@38 {
+ compatible = "ti,tas2781";
+ reg = < 0x38 /* Audio slot 0 */
+ 0x3a /* Audio slot 1 */
+ 0x39 /* Audio slot 2 */
+ 0x3b /* Audio slot 3 */
+ >;
+ #sound-dai-cells = <1>;
+ reset-gpios = < &gpio1 10 GPIO_ACTIVE_HIGH >;
+ interrupt-parent = <&gpio1>;
+ interrupts = <15>;
+ /* Generic I2C addr among all the tas2781s for i2c data broadcast */
+ ti,broadcast-addr = <0x40>;
+ };
+ };
+...
--
2.34.1
On Fri, 19 May 2023 16:02:45 +0800, Shenghao Ding wrote:
> Create tas2781.yaml for tas2781 driver.
>
> Signed-off-by: Shenghao Ding <[email protected]>
>
> ---
> Changes in v3:
> - Add allOf with ref to saound-dai-common
> - remove audio-slots, put all the i2c address into <reg>
> - Add more description on broadcast-addr item
> Changes to be committed:
> new file: Documentation/devicetree/bindings/sound/ti,tas2781.yaml
> ---
> .../devicetree/bindings/sound/ti,tas2781.yaml | 83 +++++++++++++++++++
> 1 file changed, 83 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
./Documentation/devicetree/bindings/sound/ti,tas2781.yaml:71:1: [error] syntax error: found character '\t' that cannot start any token (syntax)
dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/sound/ti,tas2781.example.dts'
Documentation/devicetree/bindings/sound/ti,tas2781.yaml:71:1: found character '\t' that cannot start any token
make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/sound/ti,tas2781.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/sound/ti,tas2781.yaml:71:1: found character '\t' that cannot start any token
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/ti,tas2781.yaml: ignoring, error parsing file
make: *** [Makefile:1512: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.