Changes in v12:
- Add the !independent! patch to block cpufreq-dt from probing on 8998 (it tries
to when we attach OPP tables to the CPU nodes)
- Include all promised changes to the CPR3 driver from v11 (I managed to
send the wrong version of that patch last time around..)
- Partially rewrite debugfs code (to make it work and be cleaner)
- use FIELD_PREP/GET throughout the driver (managed to squash a bug when
exploring that)
- Fix and finish the removal of cpr_get_ro_factor() by introducing
cpr_thread_desc.ro_scaling_factor_common
- Replace underscores in node names with '-'
- Fix some formatstring issues that clang apparently doesn't care about
- Link to v11: https://lore.kernel.org/r/[email protected]
Add support for Core Power Reduction v3, v4 and Hardened
Changes in v11:
CPR COMMON:
- split the commonizing patch, make it actually do what it says on the
tin..
- fix some overflow bugs
CPR3:
- fix some overflow bugs
- don't assume "lack of qcom,opp-?loop-vadj" means val=0"
CPR BINDINGS:
- drop quotes in items
- drop clock-names (there's just a single one)
- rewrite the description a bit
- fix up the example
- drop bogus minItems
- "acc-syscon" -> "qcom,acc"
DTS:
- fix qfprom children so that the bits=<> doesn't overflow reg[size]
- drop unrelated changes
- place one reg entry per line
Link to v10: https://lore.kernel.org/r/[email protected]
Changes in v10:
- Skip "Let qcom,opp-fuse-level be a 2-long array" (Applied by Viresh)
- Use b4 (it may be the first time you're receiving this if git send-email
omitted you before..)
- +Cc Robert Marko (expressed interest in previous revisions)
- Add "Document CPR3 open/closed loop volt adjustment"
CPR:
- %hhu -> %u (checkpatch)
CPR BINDINGS:
- Drop QCS404 fuse set (it doesn't use this driver, what did I even think..)
but leave the allOf:if: block for expansion (sdm660, msm8996, ipqABCD should
follow soon..)
- Drop Rob's R-b (as things changed *again*, please take one more look to make
sure you're okay with this file, Rob..)
Link to v9:
https://lore.kernel.org/linux-arm-msm/[email protected]/
Changes in v9:
- Restore forgotten MAINTAINERS patch (oops)
CPR:
- Include the missing header (big oops!)
- Fix kconfig dependencies
CPR bindings:
- Fix cpu reg in example (why didn't dt_binding_check scream at that)
- Add newlines between nodes in example
- Change opp table node names to opp-table-cpu[04]
- Change opp table labels to cpu[04]_opp_table
- Change CPRh opp subnode names to opp-N from oppN
- Remove some stray newlines
- Bring back nvmem-cell-names and add the 8998's set
- Allow power-domains for VDDCX_AO voting
- Remove Rob's r-b, there's been quite a bit of changes..
CPR DT:
- Send the correct revision of the patch this time around..
OPP bindings:
- Add Rob's ack
Link to v8:
https://lore.kernel.org/linux-arm-msm/[email protected]/
Changes in v8:
- Overtake this series from AGdR
- Apply all review comments from v7 except Vladimir's request to
not create the include/ header; it will be strictly necessary for
OSM-aware cpufreq_hw programming, which this series was more or
less created just for..
- Drop QCS404 dtsi change, account for not breaking backwards compat
in [3/5]
- Add type phandle type reference to acc-syscon in [1/5]
- Update AGdR's email addresses for maintainer entries
- Add [2/5] to make dt_binding_check happy
- Separate the CPRh DT addition from cpufreq_hw addition, sort and
properly indent new nodes
- Drop CPR yaml conversion, that happened in meantime
- Reorder the patches to make a bit more sense
- Tested again on MSM8998 Xperia XZ Premium (Maple)
- I take no responsibility for AGdR's cheeky jokes, only the code!
Link to v7:
https://lore.kernel.org/lkml/[email protected]/
Changes in v7:
- Rebased on linux-next as of 210901
- Changed cpr_read_efuse calls to nvmem_cell_read_variable_le_u32,
following what was done in commit c77634b9d916
Changes in v6:
- Fixes from Bjorn's review
- After a conversation with Viresh, it turned out I was abusing the
OPP API to pass the APM and MEM-ACC thresholds to qcom-cpufreq-hw,
so now the driver is using the genpd created virtual device and
passing drvdata instead to stop the abuse
- Since the CPR commonization was ignored for more than 6 months,
it is now included in the CPRv3/4/h series, as there is no point
in commonizing without having this driver
- Rebased on v5.13
Changes in v5:
- Fixed getting OPP table when not yet installed by the caller
of power domain attachment
Changes in v4:
- Huge patch series has been split for better reviewability,
as suggested by Bjorn
Changes in v3:
- Fixed YAML doc issues
- Removed unused variables and redundant if branch
Changes in v2:
- Implemented dynamic Memory Accelerator corners support, needed
by MSM8998
- Added MSM8998 Silver/Gold parameters
This commit introduces a new driver, based on the one for cpr v1,
to enable support for the newer Qualcomm Core Power Reduction
hardware, known downstream as CPR3, CPR4 and CPRh, and support
for MSM8998 and SDM630 CPU power reduction.
In these new versions of the hardware, support for various new
features was introduced, including voltage reduction for the GPU,
security hardening and a new way of controlling CPU DVFS,
consisting in internal communication between microcontrollers,
specifically the CPR-Hardened and the Operating State Manager.
The CPR v3, v4 and CPRh are present in a broad range of SoCs,
from the mid-range to the high end ones including, but not limited
to, MSM8953/8996/8998, SDM630/636/660/845.
As to clarify, SDM845 does the CPR/SAW/OSM setup in TZ firmware, but
this is limited to the CPU context; despite GPU CPR support being not
implemented in this series, it is planned for the future, and some
SDM845 need the CPR (in the context of GPU CPR) to be configured from
this driver.
It is also planned to add the CPR data for MSM8996, since this driver
does support the CPRv4 found on that SoC, but I currently have no time
to properly test that on a real device, so I prefer getting this big
implementation merged before adding more things on top.
As for MSM8953, we (read: nobody from SoMainline) have no device with
this chip: since we are unable to test the cpr data and the entire
driver on that one, we currently have no plans to do this addition
in the future. This is left to other nice developers: I'm sure that
somebody will come up with that, sooner or later
Signed-off-by: Konrad Dybcio <[email protected]>
---
AngeloGioacchino Del Regno (8):
cpufreq: blacklist MSM8998 in cpufreq-dt-platdev
MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver
dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver
soc: qcom: cpr: Move common functions to new file
soc: qcom: cpr-common: Add support for flat fuse adjustment
soc: qcom: cpr-common: Add threads support
soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened
arm64: dts: qcom: msm8998: Configure CPRh
Konrad Dybcio (2):
dt-bindings: opp: v2-qcom-level: Document CPR3 open/closed loop volt adjustment
soc: qcom: cpr: Use u64 for frequency
.../devicetree/bindings/opp/opp-v2-qcom-level.yaml | 14 +
.../devicetree/bindings/soc/qcom/qcom,cpr3.yaml | 289 ++
MAINTAINERS | 6 +
arch/arm64/boot/dts/qcom/msm8998.dtsi | 757 ++++++
drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
drivers/soc/qcom/Kconfig | 22 +
drivers/soc/qcom/Makefile | 2 +
drivers/soc/qcom/cpr-common.c | 362 +++
drivers/soc/qcom/cpr-common.h | 109 +
drivers/soc/qcom/cpr.c | 394 +--
drivers/soc/qcom/cpr3.c | 2855 ++++++++++++++++++++
include/soc/qcom/cpr.h | 17 +
12 files changed, 4460 insertions(+), 368 deletions(-)
---
base-commit: 5c875096d59010cee4e00da1f9c7bdb07a025dc2
change-id: 20230217-topic-cpr3h-de232bfb47ec
Best regards,
--
Konrad Dybcio <[email protected]>
From: AngeloGioacchino Del Regno <[email protected]>
Add maintainers entry for the Qualcomm CPR3/CPR4/CPRh driver.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
[Konrad: rebase, update AGdR's email]
Signed-off-by: Konrad Dybcio <[email protected]>
---
MAINTAINERS | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 4545d4287305..f4218f7a7c33 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17581,6 +17581,12 @@ S: Maintained
F: Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
F: drivers/soc/qcom/cpr.c
+QUALCOMM CORE POWER REDUCTION v3/v4/Hardened AVS DRIVER
+M: AngeloGioacchino Del Regno <[email protected]>
+S: Maintained
+F: Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
+F: drivers/soc/qcom/cpr3.c
+
QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
M: Ilia Lin <[email protected]>
L: [email protected]
--
2.41.0
CPR3 and newer can be fed per-OPP voltage adjustment values for both
open- and closed-loop paths to make better decisions about settling
on the final voltage offset target. Document these properties.
Signed-off-by: Konrad Dybcio <[email protected]>
---
.../devicetree/bindings/opp/opp-v2-qcom-level.yaml | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
index a30ef93213c0..b203ea01b17a 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
@@ -34,6 +34,20 @@ patternProperties:
minItems: 1
maxItems: 2
+ qcom,opp-cloop-vadj:
+ description: |
+ An array of per-thread values representing the closed-loop
+ voltage adjustment value associated with this OPP node.
+ $ref: /schemas/types.yaml#/definitions/int32-array
+ maxItems: 2
+
+ qcom,opp-oloop-vadj:
+ description: |
+ An array of per-thread values representing the open-loop
+ voltage adjustment value associated with this OPP node.
+ $ref: /schemas/types.yaml#/definitions/int32-array
+ maxItems: 2
+
required:
- opp-level
- qcom,opp-fuse-level
--
2.41.0
From: AngeloGioacchino Del Regno <[email protected]>
Now that the CPR v3/v4/Hardened is ready, enable it on MSM8998.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
[Konrad: separate from adding cpufreq, sort nodes, use lowercase hex,
update for driver changes]
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 757 ++++++++++++++++++++++++++++++++++
1 file changed, 757 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f0e943ff0046..9a53396e13ff 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -143,6 +143,9 @@ CPU0: cpu@0 {
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ power-domains = <&apc_cprh 0>;
+ power-domain-names = "cprh";
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
@@ -158,6 +161,9 @@ CPU1: cpu@1 {
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ power-domains = <&apc_cprh 0>;
+ power-domain-names = "cprh";
};
CPU2: cpu@2 {
@@ -168,6 +174,9 @@ CPU2: cpu@2 {
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ power-domains = <&apc_cprh 0>;
+ power-domain-names = "cprh";
};
CPU3: cpu@3 {
@@ -178,6 +187,9 @@ CPU3: cpu@3 {
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ power-domains = <&apc_cprh 0>;
+ power-domain-names = "cprh";
};
CPU4: cpu@100 {
@@ -188,6 +200,9 @@ CPU4: cpu@100 {
capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ power-domains = <&apc_cprh 1>;
+ power-domain-names = "cprh";
L2_1: l2-cache {
compatible = "cache";
cache-level = <2>;
@@ -203,6 +218,9 @@ CPU5: cpu@101 {
capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ power-domains = <&apc_cprh 1>;
+ power-domain-names = "cprh";
};
CPU6: cpu@102 {
@@ -213,6 +231,9 @@ CPU6: cpu@102 {
capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ power-domains = <&apc_cprh 1>;
+ power-domain-names = "cprh";
};
CPU7: cpu@103 {
@@ -223,6 +244,9 @@ CPU7: cpu@103 {
capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ power-domains = <&apc_cprh 1>;
+ power-domain-names = "cprh";
};
cpu-map {
@@ -316,6 +340,490 @@ scm {
};
};
+ cprh_opp_table: opp-table-cprh {
+ compatible = "operating-points-v2-qcom-level";
+
+ cprh_opp1: opp-1 {
+ opp-level = <1>;
+ qcom,opp-fuse-level = <1 1>;
+ qcom,opp-cloop-vadj = <0 0>;
+ qcom,opp-oloop-vadj = <0 0>;
+ };
+
+ cprh_opp2: opp-2 {
+ opp-level = <2>;
+ qcom,opp-fuse-level = <1 1>;
+ qcom,opp-cloop-vadj = <0 0>;
+ qcom,opp-oloop-vadj = <0 0>;
+ };
+
+ cprh_opp3: opp-3 {
+ opp-level = <3>;
+ qcom,opp-fuse-level = <1 1>;
+ qcom,opp-cloop-vadj = <0 0>;
+ qcom,opp-oloop-vadj = <0 0>;
+ };
+
+ cprh_opp4: opp-4 {
+ opp-level = <4>;
+ qcom,opp-fuse-level = <1 1>;
+ qcom,opp-cloop-vadj = <0 0>;
+ qcom,opp-oloop-vadj = <0 0>;
+ };
+
+ cprh_opp5: opp-5 {
+ opp-level = <5>;
+ qcom,opp-fuse-level = <1 1>;
+ qcom,opp-cloop-vadj = <0 0>;
+ qcom,opp-oloop-vadj = <0 0>;
+ };
+
+ cprh_opp6: opp-6 {
+ opp-level = <6>;
+ qcom,opp-fuse-level = <1 1>;
+ qcom,opp-cloop-vadj = <0 0>;
+ qcom,opp-oloop-vadj = <0 0>;
+ };
+
+ cprh_opp7: opp-7 {
+ opp-level = <7>;
+ qcom,opp-fuse-level = <1 1>;
+ qcom,opp-cloop-vadj = <0 0>;
+ qcom,opp-oloop-vadj = <0 0>;
+ };
+
+ cprh_opp8: opp-8 {
+ opp-level = <8>;
+ qcom,opp-fuse-level = <1 1>;
+ qcom,opp-cloop-vadj = <0 0>;
+ qcom,opp-oloop-vadj = <0 0>;
+ };
+
+ cprh_opp9: opp-9 {
+ opp-level = <9>;
+ qcom,opp-fuse-level = <2 2>;
+ qcom,opp-cloop-vadj = <0 0>;
+ qcom,opp-oloop-vadj = <0 0>;
+ };
+
+ cprh_opp10: opp-10 {
+ opp-level = <10>;
+ qcom,opp-fuse-level = <2 2>;
+ qcom,opp-cloop-vadj = <0 0>;
+ qcom,opp-oloop-vadj = <0 0>;
+ };
+
+ cprh_opp11: opp-11 {
+ opp-level = <11>;
+ qcom,opp-fuse-level = <2 2>;
+ qcom,opp-cloop-vadj = <0 0>;
+ qcom,opp-oloop-vadj = <0 0>;
+ };
+
+ cprh_opp12: opp-12 {
+ opp-level = <12>;
+ qcom,opp-fuse-level = <3 2>;
+ qcom,opp-cloop-vadj = <(-10000) (-10000)>;
+ qcom,opp-oloop-vadj = <(-12000) (-8000)>;
+ };
+
+ cprh_opp13: opp-13 {
+ opp-level = <13>;
+ qcom,opp-fuse-level = <3 3>;
+ qcom,opp-cloop-vadj = <(-11000) (-10000)>;
+ qcom,opp-oloop-vadj = <(-16000) (-16000)>;
+ };
+
+ cprh_opp14: opp-14 {
+ opp-level = <14>;
+ qcom,opp-fuse-level = <3 3>;
+ qcom,opp-cloop-vadj = <(-12000) (-11000)>;
+ qcom,opp-oloop-vadj = <(-16000) (-12000)>;
+ };
+
+ cprh_opp15: opp-15 {
+ opp-level = <15>;
+ qcom,opp-fuse-level = <3 3>;
+ qcom,opp-cloop-vadj = <(-13000) (-12000)>;
+ qcom,opp-oloop-vadj = <(-12000) (-16000)>;
+ };
+
+ cprh_opp16: opp-16 {
+ opp-level = <16>;
+ qcom,opp-fuse-level = <3 3>;
+ qcom,opp-cloop-vadj = <(-14000) (-12000)>;
+ qcom,opp-oloop-vadj = <(-12000) (-16000)>;
+ };
+
+ cprh_opp17: opp-17 {
+ opp-level = <17>;
+ qcom,opp-fuse-level = <3 3>;
+ qcom,opp-cloop-vadj = <(-14000) (-13000)>;
+ qcom,opp-oloop-vadj = <(-16000) (-12000)>;
+ };
+
+ cprh_opp18: opp-18 {
+ opp-level = <18>;
+ qcom,opp-fuse-level = <3 3>;
+ qcom,opp-cloop-vadj = <(-15000) (-14000)>;
+ qcom,opp-oloop-vadj = <(-16000) (-16000)>;
+ };
+
+ cprh_opp19: opp-19 {
+ opp-level = <19>;
+ qcom,opp-fuse-level = <4 3>;
+ qcom,opp-cloop-vadj = <(-21000) (-14000)>;
+ qcom,opp-oloop-vadj = <(-20000) (-16000)>;
+ };
+
+ cprh_opp20: opp-20 {
+ opp-level = <20>;
+ qcom,opp-fuse-level = <4 3>;
+ qcom,opp-cloop-vadj = <(-24000) (-15000)>;
+ qcom,opp-oloop-vadj = <(-24000) (-16000)>;
+ };
+
+ cprh_opp21: opp-21 {
+ opp-level = <21>;
+ qcom,opp-fuse-level = <4 4>;
+ qcom,opp-cloop-vadj = <(-26000) (-16000)>;
+ qcom,opp-oloop-vadj = <(-28000) (-24000)>;
+ };
+
+ cprh_opp22: opp-22 {
+ opp-level = <22>;
+ qcom,opp-fuse-level = <4 4>;
+ qcom,opp-cloop-vadj = <(-28000) (-16000)>;
+ qcom,opp-oloop-vadj = <(-28000) (-16000)>;
+ };
+
+ cprh_opp23: opp-23 {
+ opp-level = <23>;
+ qcom,opp-fuse-level = <4 4>;
+ qcom,opp-cloop-vadj = <0 (-17000)>;
+ qcom,opp-oloop-vadj = <0 (-20000)>;
+ };
+
+ cprh_opp24: opp-24 {
+ opp-level = <24>;
+ qcom,opp-fuse-level = <4 4>;
+ qcom,opp-cloop-vadj = <0 (-15000)>;
+ qcom,opp-oloop-vadj = <0 (-16000)>;
+ };
+
+ cprh_opp25: opp-25 {
+ opp-level = <25>;
+ qcom,opp-fuse-level = <4 4>;
+ qcom,opp-cloop-vadj = <0 (-14000)>;
+ qcom,opp-oloop-vadj = <0 (-12000)>;
+ };
+
+ cprh_opp26: opp-26 {
+ opp-level = <26>;
+ qcom,opp-fuse-level = <4 4>;
+ qcom,opp-cloop-vadj = <0 (-27000)>;
+ qcom,opp-oloop-vadj = <0 (-28000)>;
+ };
+
+ cprh_opp27: opp-27 {
+ opp-level = <27>;
+ qcom,opp-fuse-level = <4 4>;
+ qcom,opp-cloop-vadj = <0 (-27000)>;
+ qcom,opp-oloop-vadj = <0 (-28000)>;
+ };
+
+ cprh_opp28: opp-28 {
+ opp-level = <28>;
+ qcom,opp-fuse-level = <4 4>;
+ qcom,opp-cloop-vadj = <0 (-28000)>;
+ qcom,opp-oloop-vadj = <0 (-28000)>;
+ };
+
+ cprh_opp29: opp-29 {
+ opp-level = <29>;
+ qcom,opp-fuse-level = <4 4>;
+ qcom,opp-cloop-vadj = <0 (-28000)>;
+ qcom,opp-oloop-vadj = <0 (-28000)>;
+ };
+
+ cprh_opp30: opp-30 {
+ opp-level = <30>;
+ qcom,opp-fuse-level = <4 4>;
+ qcom,opp-cloop-vadj = <0 (-28000)>;
+ qcom,opp-oloop-vadj = <0 (-28000)>;
+ };
+ };
+
+ cpu0_opp_table: opp-table-cpu0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1900800000 {
+ opp-hz = /bits/ 64 <1900800000>;
+ required-opps = <&cprh_opp22>;
+ };
+
+ opp-1824000000 {
+ opp-hz = /bits/ 64 <1824000000>;
+ required-opps = <&cprh_opp21>;
+ };
+
+ opp-1747200000 {
+ opp-hz = /bits/ 64 <1747200000>;
+ required-opps = <&cprh_opp20>;
+ };
+
+ opp-1670400000 {
+ opp-hz = /bits/ 64 <1670400000>;
+ required-opps = <&cprh_opp19>;
+ };
+
+ opp-1555200000 {
+ opp-hz = /bits/ 64 <1555200000>;
+ required-opps = <&cprh_opp18>;
+ };
+
+ opp-1478400000 {
+ opp-hz = /bits/ 64 <1478400000>;
+ required-opps = <&cprh_opp17>;
+ };
+
+ opp-1401600000 {
+ opp-hz = /bits/ 64 <1401600000>;
+ required-opps = <&cprh_opp16>;
+ };
+
+ opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ required-opps = <&cprh_opp15>;
+ };
+
+ opp-1248000000 {
+ opp-hz = /bits/ 64 <1248000000>;
+ required-opps = <&cprh_opp14>;
+ };
+
+ opp-1171200000 {
+ opp-hz = /bits/ 64 <1171200000>;
+ required-opps = <&cprh_opp13>;
+ };
+
+ opp-1094400000 {
+ opp-hz = /bits/ 64 <1094400000>;
+ required-opps = <&cprh_opp12>;
+ };
+
+ opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ required-opps = <&cprh_opp11>;
+ };
+
+ opp-960000000 {
+ opp-hz = /bits/ 64 <960000000>;
+ required-opps = <&cprh_opp10>;
+ };
+
+ opp-883200000 {
+ opp-hz = /bits/ 64 <883200000>;
+ required-opps = <&cprh_opp9>;
+ };
+
+ opp-825600000 {
+ opp-hz = /bits/ 64 <825600000>;
+ required-opps = <&cprh_opp8>;
+ };
+
+ opp-748800000 {
+ opp-hz = /bits/ 64 <748800000>;
+ required-opps = <&cprh_opp7>;
+ };
+
+ opp-672000000 {
+ opp-hz = /bits/ 64 <672000000>;
+ required-opps = <&cprh_opp6>;
+ };
+
+ opp-595200000 {
+ opp-hz = /bits/ 64 <595200000>;
+ required-opps = <&cprh_opp5>;
+ };
+
+ opp-518400000 {
+ opp-hz = /bits/ 64 <518400000>;
+ required-opps = <&cprh_opp4>;
+ };
+
+ opp-441600000 {
+ opp-hz = /bits/ 64 <441600000>;
+ required-opps = <&cprh_opp3>;
+ };
+
+ opp-364800000 {
+ opp-hz = /bits/ 64 <364800000>;
+ required-opps = <&cprh_opp2>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&cprh_opp1>;
+ };
+ };
+
+ cpu4_opp_table: opp-table-cpu4 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-2361600000 {
+ opp-hz = /bits/ 64 <2361600000>;
+ required-opps = <&cprh_opp30>;
+ };
+
+ opp-2342400000 {
+ opp-hz = /bits/ 64 <2342400000>;
+ required-opps = <&cprh_opp29>;
+ };
+
+ opp-2323200000 {
+ opp-hz = /bits/ 64 <2323200000>;
+ required-opps = <&cprh_opp28>;
+ };
+
+ opp-2265600000 {
+ opp-hz = /bits/ 64 <2265600000>;
+ required-opps = <&cprh_opp27>;
+ };
+
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ required-opps = <&cprh_opp26>;
+ };
+
+ opp-2112000000 {
+ opp-hz = /bits/ 64 <2112000000>;
+ required-opps = <&cprh_opp25>;
+ };
+
+ opp-2035200000 {
+ opp-hz = /bits/ 64 <2035200000>;
+ required-opps = <&cprh_opp24>;
+ };
+
+ opp-1958400000 {
+ opp-hz = /bits/ 64 <1958400000>;
+ required-opps = <&cprh_opp23>;
+ };
+
+ opp-1881600000 {
+ opp-hz = /bits/ 64 <1881600000>;
+ required-opps = <&cprh_opp22>;
+ };
+
+ opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ required-opps = <&cprh_opp21>;
+ };
+
+ opp-1728000000 {
+ opp-hz = /bits/ 64 <1728000000>;
+ required-opps = <&cprh_opp20>;
+ };
+
+ opp-1651200000 {
+ opp-hz = /bits/ 64 <1651200000>;
+ required-opps = <&cprh_opp19>;
+ };
+
+ opp-1574400000 {
+ opp-hz = /bits/ 64 <1574400000>;
+ required-opps = <&cprh_opp18>;
+ };
+
+ opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ required-opps = <&cprh_opp17>;
+ };
+
+ opp-1420800000 {
+ opp-hz = /bits/ 64 <1420800000>;
+ required-opps = <&cprh_opp16>;
+ };
+
+ opp-1344000000 {
+ opp-hz = /bits/ 64 <1344000000>;
+ required-opps = <&cprh_opp15>;
+ };
+
+ opp-1267200000 {
+ opp-hz = /bits/ 64 <1267200000>;
+ required-opps = <&cprh_opp14>;
+ };
+
+ opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ required-opps = <&cprh_opp13>;
+ };
+
+ opp-1132800000 {
+ opp-hz = /bits/ 64 <1132800000>;
+ required-opps = <&cprh_opp12>;
+ };
+
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ required-opps = <&cprh_opp11>;
+ };
+
+ opp-979200000 {
+ opp-hz = /bits/ 64 <979200000>;
+ required-opps = <&cprh_opp10>;
+ };
+
+ opp-902400000 {
+ opp-hz = /bits/ 64 <902400000>;
+ required-opps = <&cprh_opp9>;
+ };
+
+ opp-806400000 {
+ opp-hz = /bits/ 64 <806400000>;
+ required-opps = <&cprh_opp8>;
+ };
+
+ opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ required-opps = <&cprh_opp7>;
+ };
+
+ opp-652800000 {
+ opp-hz = /bits/ 64 <652800000>;
+ required-opps = <&cprh_opp6>;
+ };
+
+ opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ required-opps = <&cprh_opp5>;
+ };
+
+ opp-499200000 {
+ opp-hz = /bits/ 64 <499200000>;
+ required-opps = <&cprh_opp4>;
+ };
+
+ opp-422400000 {
+ opp-hz = /bits/ 64 <422400000>;
+ required-opps = <&cprh_opp3>;
+ };
+
+ opp-345600000 {
+ opp-hz = /bits/ 64 <345600000>;
+ required-opps = <&cprh_opp2>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&cprh_opp1>;
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -845,6 +1353,174 @@ qfprom: qfprom@784000 {
#address-cells = <1>;
#size-cells = <1>;
+ cpr_efuse_speedbin: speedbin@133 {
+ reg = <0x133 0x8>;
+ bits = <5 3>;
+ };
+
+ cpr_fuse_revision: cpr-fusing-rev@13e {
+ reg = <0x13e 0x1>;
+ bits = <3 3>;
+ };
+
+ /* CPR Ring Oscillator: Power Cluster */
+ cpr_ro_sel3_pwrcl: rosel3-pwrcl@218 {
+ reg = <0x218 0x1>;
+ bits = <0 4>;
+ };
+
+ cpr_ro_sel2_pwrcl: rosel2-pwrcl@218 {
+ reg = <0x218 0x1>;
+ bits = <4 4>;
+ };
+
+ cpr_ro_sel1_pwrcl: rosel1-pwrcl@219 {
+ reg = <0x219 0x1>;
+ bits = <0 4>;
+ };
+
+ cpr_ro_sel0_pwrcl: rosel0-pwrcl@219 {
+ reg = <0x219 0x1>;
+ bits = <4 4>;
+ };
+
+ /* CPR Init Voltage: Power Cluster */
+ cpr_init_voltage3_pwrcl: ivolt3-pwrcl@21a {
+ reg = <0x21a 0x1>;
+ bits = <0 6>;
+ };
+
+ cpr_init_voltage2_pwrcl: ivolt2-pwrcl@21a {
+ reg = <0x21a 0x2>;
+ bits = <6 6>;
+ };
+
+ cpr_init_voltage1_pwrcl: ivolt1-pwrcl@21b {
+ reg = <0x21b 0x2>;
+ bits = <4 6>;
+ };
+
+ cpr_init_voltage0_pwrcl: ivolt0-pwrcl@21c {
+ reg = <0x21c 0x1>;
+ bits = <2 6>;
+ };
+
+ /* CPR Target Quotients: Power Cluster */
+ cpr_quot3_pwrcl: quot3-pwrcl@21d {
+ reg = <0x21d 0x3>;
+ bits = <6 12>;
+ };
+
+ cpr_quot2_pwrcl: quot2-pwrcl@21f {
+ reg = <0x21f 0x2>;
+ bits = <2 11>;
+ };
+
+ cpr_quot1_pwrcl: quot1-pwrcl@220 {
+ reg = <0x220 0x3>;
+ bits = <6 12>;
+ };
+
+ cpr_quot0_pwrcl: quot0-pwrcl@222 {
+ reg = <0x222 0x2>;
+ bits = <2 12>;
+ };
+
+ /* CPR Quotient Offsets: Power Cluster */
+ cpr_quot_offset3_pwrcl: qoff3-pwrcl@226 {
+ reg = <0x226 0x1>;
+ bits = <1 7>;
+ };
+
+ cpr_quot_offset2_pwrcl: qoff2-pwrcl@227 {
+ reg = <0x227 0x1>;
+ bits = <0 7>;
+ };
+
+ cpr_quot_offset1_pwrcl: qoff1-pwrcl@227 {
+ reg = <0x227 0x2>;
+ bits = <7 6>;
+ };
+
+ /* CPR Ring Oscillator: Performance Cluster */
+ cpr_ro_sel3_perfcl: rosel3-perfcl@229 {
+ reg = <0x229 0x2>;
+ bits = <6 4>;
+ };
+
+ cpr_ro_sel2_perfcl: rosel2-perfcl@22a {
+ reg = <0x22a 0x1>;
+ bits = <2 4>;
+ };
+
+ cpr_ro_sel1_perfcl: rosel1-perfcl@22a {
+ reg = <0x22a 0x2>;
+ bits = <6 4>;
+ };
+
+ cpr_ro_sel0_perfcl: rosel0-perfcl@22b {
+ reg = <0x22b 0x1>;
+ bits = <2 4>;
+ };
+
+ /* CPR Init Voltage: Performance Cluster */
+ cpr_init_voltage3_perfcl: ivolt3-perfcl@22b {
+ reg = <0x22b 0x2>;
+ bits = <6 6>;
+ };
+
+ cpr_init_voltage2_perfcl: ivolt2-perfcl@22c {
+ reg = <0x22c 0x2>;
+ bits = <4 6>;
+ };
+
+ cpr_init_voltage1_perfcl: ivolt1-perfcl@22d {
+ reg = <0x22d 0x1>;
+ bits = <2 6>;
+ };
+
+ cpr_init_voltage0_perfcl: ivolt0-perfcl@22e {
+ reg = <0x22e 0x1>;
+ bits = <0 6>;
+ };
+
+ /* CPR Target Quotients: Performance Cluster */
+ cpr_quot3_perfcl: quot3-perfcl@22f {
+ reg = <0x22f 0x2>;
+ bits = <4 11>;
+ };
+
+ cpr_quot2_perfcl: quot2-perfcl@231 {
+ reg = <0x231 0x2>;
+ bits = <0 12>;
+ };
+
+ cpr_quot1_perfcl: quot1-perfcl@232 {
+ reg = <0x232 0x2>;
+ bits = <4 12>;
+ };
+
+ cpr_quot0_perfcl: quot0-perfcl@234 {
+ reg = <0x234 0x2>;
+ bits = <0 12>;
+ };
+
+ /* CPR Quotient Offsets: Performance Cluster */
+ cpr_quot_offset3_perfcl: qoff3-perfcl@237 {
+ reg = <0x237 0x2>;
+ bits = <7 6>;
+ };
+
+ cpr_quot_offset2_perfcl: qoff2-perfcl@238 {
+ reg = <0x238 0x2>;
+ bits = <6 7>;
+ };
+
+ cpr_quot_offset1_perfcl: qoff1-perfcl@239 {
+ reg = <0x239 0x1>;
+ bits = <5 3>;
+ };
+
qusb2_hstx_trim: hstx-trim@23a {
reg = <0x23a 0x1>;
bits = <0 4>;
@@ -2865,6 +3541,87 @@ frame@17928000 {
};
};
+ apc_cprh: power-controller@179c8000 {
+ compatible = "qcom,msm8998-cprh", "qcom,cprh";
+ reg = <0x179c8000 0x4000>,
+ <0x179c4000 0x4000>;
+
+ clocks = <&gcc GCC_HMSS_RBCPR_CLK>;
+
+ /* Set the CPR clock here, it needs to match XO */
+ assigned-clocks = <&gcc GCC_HMSS_RBCPR_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&cprh_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDCX_AO>;
+ #power-domain-cells = <1>;
+
+ nvmem-cells = <&cpr_efuse_speedbin>,
+ <&cpr_fuse_revision>,
+ <&cpr_quot0_pwrcl>,
+ <&cpr_quot1_pwrcl>,
+ <&cpr_quot2_pwrcl>,
+ <&cpr_quot3_pwrcl>,
+ <&cpr_quot_offset1_pwrcl>,
+ <&cpr_quot_offset2_pwrcl>,
+ <&cpr_quot_offset3_pwrcl>,
+ <&cpr_init_voltage0_pwrcl>,
+ <&cpr_init_voltage1_pwrcl>,
+ <&cpr_init_voltage2_pwrcl>,
+ <&cpr_init_voltage3_pwrcl>,
+ <&cpr_ro_sel0_pwrcl>,
+ <&cpr_ro_sel1_pwrcl>,
+ <&cpr_ro_sel2_pwrcl>,
+ <&cpr_ro_sel3_pwrcl>,
+ <&cpr_quot0_perfcl>,
+ <&cpr_quot1_perfcl>,
+ <&cpr_quot2_perfcl>,
+ <&cpr_quot3_perfcl>,
+ <&cpr_quot_offset1_perfcl>,
+ <&cpr_quot_offset2_perfcl>,
+ <&cpr_quot_offset3_perfcl>,
+ <&cpr_init_voltage0_perfcl>,
+ <&cpr_init_voltage1_perfcl>,
+ <&cpr_init_voltage2_perfcl>,
+ <&cpr_init_voltage3_perfcl>,
+ <&cpr_ro_sel0_perfcl>,
+ <&cpr_ro_sel1_perfcl>,
+ <&cpr_ro_sel2_perfcl>,
+ <&cpr_ro_sel3_perfcl>;
+ nvmem-cell-names = "cpr_speed_bin",
+ "cpr_fuse_revision",
+ "cpr0_quotient1",
+ "cpr0_quotient2",
+ "cpr0_quotient3",
+ "cpr0_quotient4",
+ "cpr0_quotient_offset2",
+ "cpr0_quotient_offset3",
+ "cpr0_quotient_offset4",
+ "cpr0_init_voltage1",
+ "cpr0_init_voltage2",
+ "cpr0_init_voltage3",
+ "cpr0_init_voltage4",
+ "cpr0_ring_osc1",
+ "cpr0_ring_osc2",
+ "cpr0_ring_osc3",
+ "cpr0_ring_osc4",
+ "cpr1_quotient1",
+ "cpr1_quotient2",
+ "cpr1_quotient3",
+ "cpr1_quotient4",
+ "cpr1_quotient_offset2",
+ "cpr1_quotient_offset3",
+ "cpr1_quotient_offset4",
+ "cpr1_init_voltage1",
+ "cpr1_init_voltage2",
+ "cpr1_init_voltage3",
+ "cpr1_init_voltage4",
+ "cpr1_ring_osc1",
+ "cpr1_ring_osc2",
+ "cpr1_ring_osc3",
+ "cpr1_ring_osc4";
+ };
+
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
reg = <0x17a00000 0x10000>, /* GICD */
--
2.41.0
From: AngeloGioacchino Del Regno <[email protected]>
This commit introduces a new driver, based on the one for cpr v1,
to enable support for the newer Qualcomm Core Power Reduction
hardware, known downstream as CPR3, CPR4 and CPRh, and support
for MSM8998 and SDM630 CPU power reduction.
In these new versions of the hardware, support for various new
features was introduced, including voltage reduction for the GPU,
security hardening and a new way of controlling CPU DVFS,
consisting in internal communication between microcontrollers,
specifically the CPR-Hardened and the Operating State Manager.
The CPR v3, v4 and CPRh are present in a broad range of SoCs,
from the mid-range to the high end ones including, but not limited
to, MSM8953/8996/8998, SDM630/636/660/845.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
[Konrad: rebase, apply review comments]
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/soc/qcom/Kconfig | 22 +
drivers/soc/qcom/Makefile | 4 +-
drivers/soc/qcom/cpr-common.h | 2 +
drivers/soc/qcom/cpr3.c | 2855 +++++++++++++++++++++++++++++++++++++++++
include/soc/qcom/cpr.h | 17 +
5 files changed, 2899 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index e597799e8121..0e62827523ad 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -29,6 +29,7 @@ config QCOM_COMMAND_DB
config QCOM_CPR
tristate "QCOM Core Power Reduction (CPR) support"
depends on ARCH_QCOM && HAS_IOMEM
+ select QCOM_CPR_COMMON
select PM_OPP
select REGMAP
help
@@ -42,6 +43,27 @@ config QCOM_CPR
To compile this driver as a module, choose M here: the module will
be called qcom-cpr
+config QCOM_CPR_COMMON
+ tristate
+
+config QCOM_CPR3
+ tristate "QCOM Core Power Reduction (CPR v3/v4/Hardened) support"
+ depends on ARCH_QCOM && HAS_IOMEM
+ select QCOM_CPR_COMMON
+ select PM_OPP
+ select REGMAP
+ help
+ Say Y here to enable support for the CPR hardware found on a broad
+ variety of Qualcomm SoCs like MSM8996, MSM8998, SDM630, SDM660,
+ SDM845 and others.
+
+ This driver populates OPP tables and makes adjustments to them
+ based on feedback from the CPR hardware. If you want to do CPU
+ and/or GPU frequency scaling say Y here.
+
+ To compile this driver as a module, choose M here: the module will
+ be called qcom-cpr3
+
config QCOM_GENI_SE
tristate "QCOM GENI Serial Engine Driver"
depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 82b23743371b..f2878f451fb0 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -3,7 +3,9 @@ CFLAGS_rpmh-rsc.o := -I$(src)
obj-$(CONFIG_QCOM_AOSS_QMP) += qcom_aoss.o
obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o
obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
-obj-$(CONFIG_QCOM_CPR) += cpr-common.o cpr.o
+obj-$(CONFIG_QCOM_CPR) += cpr.o
+obj-$(CONFIG_QCOM_CPR_COMMON) += cpr-common.o
+obj-$(CONFIG_QCOM_CPR3) += cpr3.o
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o
obj-$(CONFIG_QCOM_OCMEM) += ocmem.o
diff --git a/drivers/soc/qcom/cpr-common.h b/drivers/soc/qcom/cpr-common.h
index 2c5bb81ab713..17f55bbc4a11 100644
--- a/drivers/soc/qcom/cpr-common.h
+++ b/drivers/soc/qcom/cpr-common.h
@@ -65,6 +65,8 @@ struct corner {
struct corner_data {
unsigned int fuse_corner;
u64 freq;
+ int oloop_vadj;
+ int cloop_vadj;
};
struct acc_desc {
diff --git a/drivers/soc/qcom/cpr3.c b/drivers/soc/qcom/cpr3.c
new file mode 100644
index 000000000000..6ee74f80d2cb
--- /dev/null
+++ b/drivers/soc/qcom/cpr3.c
@@ -0,0 +1,2855 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2013-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019 Linaro Limited
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ * <[email protected]>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/workqueue.h>
+#include <soc/qcom/cpr.h>
+
+#include "cpr-common.h"
+
+#define CPR3_RO_COUNT 16
+#define CPR3_RO_MASK GENMASK(CPR3_RO_COUNT - 1, 0)
+
+/* CPR3 registers */
+#define CPR3_REG_CPR_VERSION 0x0
+#define CPRH_CPR_VERSION_4P5 0x40050000
+
+#define CPR3_REG_CPR_CTL 0x4
+#define CPR3_CPR_CTL_LOOP_EN_MASK BIT(0)
+#define CPR3_CPR_CTL_IDLE_CLOCKS_MASK GENMASK(5, 1)
+#define CPR3_CPR_CTL_COUNT_MODE_MASK GENMASK(7, 6)
+ #define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN 0
+ #define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MAX 1
+ #define CPR3_CPR_CTL_COUNT_MODE_STAGGERED 2
+ #define CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_AGE 3
+#define CPR3_CPR_CTL_COUNT_REPEAT_MASK GENMASK(31, 9)
+
+#define CPR3_REG_CPR_STATUS 0x8
+#define CPR3_CPR_STATUS_BUSY_MASK BIT(0)
+
+/*
+ * This register is not present on controllers that support HW closed-loop
+ * except CPR4 APSS controller.
+ */
+#define CPR3_REG_CPR_TIMER_AUTO_CONT 0xC
+
+#define CPR3_REG_CPR_STEP_QUOT 0x14
+#define CPR3_CPR_STEP_QUOT_MIN_MASK GENMASK(5, 0)
+#define CPR3_CPR_STEP_QUOT_MAX_MASK GENMASK(11, 6)
+#define CPRH_DELTA_QUOT_STEP_FACTOR 4
+
+#define CPR3_REG_GCNT(ro) (0xA0 + 0x4 * (ro))
+#define CPR3_REG_SENSOR_OWNER(sensor) (0x200 + 0x4 * (sensor))
+
+#define CPR3_REG_CONT_CMD 0x800
+#define CPR3_CONT_CMD_ACK 0x1
+#define CPR3_CONT_CMD_NACK 0x0
+
+#define CPR3_REG_THRESH(thread) (0x808 + 0x440 * (thread))
+#define CPR3_THRESH_CONS_DOWN_MASK GENMASK(3, 0)
+#define CPR3_THRESH_CONS_UP_MASK GENMASK(7, 4)
+#define CPR3_THRESH_DOWN_THRESH_MASK GENMASK(12, 8)
+#define CPR3_THRESH_UP_THRESH_MASK GENMASK(17, 13)
+
+#define CPR3_REG_RO_MASK(thread) (0x80C + 0x440 * (thread))
+
+#define CPR3_REG_RESULT0(thread) (0x810 + 0x440 * (thread))
+#define CPR3_RESULT0_BUSY_MASK BIT(0)
+#define CPR3_RESULT0_STEP_DN_MASK BIT(1)
+#define CPR3_RESULT0_STEP_UP_MASK BIT(2)
+#define CPR3_RESULT0_ERROR_STEPS_MASK GENMASK(7, 3)
+#define CPR3_RESULT0_ERROR_MASK GENMASK(19, 8)
+#define CPR3_RESULT0_NEG_MASK BIT(20)
+
+#define CPR3_REG_RESULT1(thread) (0x814 + 0x440 * (thread))
+#define CPR3_RESULT1_QUOT_MIN_MASK GENMASK(11, 0)
+#define CPR3_RESULT1_QUOT_MAX_MASK GENMASK(23, 12)
+#define CPR3_RESULT1_RO_MIN_MASK GENMASK(27, 24)
+#define CPR3_RESULT1_RO_MAX_MASK GENMASK(31, 28)
+
+#define CPR3_REG_RESULT2(thread) (0x818 + 0x440 * (thread))
+#define CPR3_RESULT2_STEP_QUOT_MIN_MASK GENMASK(5, 0)
+#define CPR3_RESULT2_STEP_QUOT_MAX_MASK GENMASK(11, 6)
+#define CPR3_RESULT2_SENSOR_MIN_MASK GENMASK(23, 16)
+#define CPR3_RESULT2_SENSOR_MAX_MASK GENMASK(31, 24)
+
+#define CPR3_REG_IRQ_EN 0x81C
+#define CPR3_REG_IRQ_CLEAR 0x820
+#define CPR3_REG_IRQ_STATUS 0x824
+#define CPR3_IRQ_UP BIT(3)
+#define CPR3_IRQ_MID BIT(2)
+#define CPR3_IRQ_DOWN BIT(1)
+#define CPR3_IRQ_ALL (CPR3_IRQ_UP | CPR3_IRQ_MID | CPR3_IRQ_DOWN)
+
+#define CPR3_REG_TARGET_QUOT(thread, ro) (0x840 + 0x440 * (thread) + 0x4 * (ro))
+
+/* Registers found only on controllers that support HW closed-loop. */
+#define CPR3_REG_PD_THROTTLE 0xE8
+
+#define CPR3_REG_HW_CLOSED_LOOP_DISABLED 0x3000
+#define CPR3_REG_CPR_TIMER_MID_CONT 0x3004
+#define CPR3_REG_CPR_TIMER_UP_DN_CONT 0x3008
+
+/* CPR4 controller specific registers and bit definitions */
+#define CPR4_REG_CPR_TIMER_CLAMP 0x10
+#define CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN BIT(27)
+
+#define CPR4_REG_MISC 0x700
+#define CPR4_MISC_RESET_STEP_QUOT_LOOP_EN BIT(2)
+#define CPR4_MISC_THREAD_HAS_ALWAYS_VOTE_EN BIT(3)
+
+#define CPR4_REG_SAW_ERROR_STEP_LIMIT 0x7A4
+#define CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK GENMASK(4, 0)
+#define CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT 0
+#define CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK GENMASK(9, 5)
+#define CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT 5
+
+#define CPR4_REG_MARGIN_TEMP_CORE_TIMERS 0x7A8
+#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK GENMASK(28, 18)
+#define CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHFT 18
+
+#define CPR4_REG_MARGIN_ADJ_CTL 0x7F8
+#define CPR4_MARGIN_ADJ_HW_CLOSED_LOOP_EN BIT(4)
+#define CPR4_MARGIN_ADJ_PER_RO_KV_MARGIN_EN BIT(7)
+#define CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_MASK GENMASK(16, 12)
+#define CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_SHIFT 12
+#define CPR4_MARGIN_ADJ_KV_MARGIN_ADJ_STEP_QUOT_MASK GENMASK(31, 26)
+#define CPR4_MARGIN_ADJ_KV_MARGIN_ADJ_STEP_QUOT_SHIFT 26
+
+#define CPR4_REG_CPR_MASK_THREAD(thread) (0x80C + 0x440 * (thread))
+#define CPR4_CPR_MASK_THREAD_DISABLE_THREAD BIT(31)
+#define CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK GENMASK(15, 0)
+
+/* CPRh controller specific registers and bit definitions */
+#define __CPRH_REG_CORNER(rbase, tbase, tid, cnum) (rbase + (tbase * tid) + (0x4 * cnum))
+#define CPRH_REG_CORNER(d, t, c) __CPRH_REG_CORNER(d->reg_corner, d->reg_corner_tid, t, c)
+
+#define CPRH_CTL_OSM_ENABLED BIT(0)
+#define CPRH_CTL_BASE_VOLTAGE_MASK GENMASK(10, 1)
+#define CPRH_CTL_BASE_VOLTAGE_SHIFT 1
+#define CPRH_CTL_MODE_SWITCH_DELAY_MASK GENMASK(24, 17)
+#define CPRH_CTL_MODE_SWITCH_DELAY_SHIFT 17
+#define CPRH_CTL_VOLTAGE_MULTIPLIER_MASK GENMASK(28, 25)
+#define CPRH_CTL_VOLTAGE_MULTIPLIER_SHIFT 25
+
+#define CPRH_CORNER_INIT_VOLTAGE_MASK GENMASK(7, 0)
+#define CPRH_CORNER_FLOOR_VOLTAGE_MASK GENMASK(15, 8)
+#define CPRH_CORNER_QUOT_DELTA_MASK GENMASK(24, 16)
+#define CPRH_CORNER_RO_SEL_MASK GENMASK(28, 25)
+#define CPRH_CORNER_CPR_CL_DISABLE BIT(29)
+
+#define CPRH_CORNER_INIT_VOLTAGE_MAX_VALUE 255
+#define CPRH_CORNER_FLOOR_VOLTAGE_MAX_VALUE 255
+#define CPRH_CORNER_QUOT_DELTA_MAX_VALUE 511
+
+enum cpr_type {
+ CTRL_TYPE_CPR3,
+ CTRL_TYPE_CPR4,
+ CTRL_TYPE_CPRH,
+ CTRL_TYPE_MAX,
+};
+
+/*
+ * struct cpr_thread_desc - CPR Thread-specific parameters
+ *
+ * @controller_id: Identifier of the CPR controller expected by the HW
+ * @hw_tid: Identifier of the CPR thread expected by the HW
+ * @ro_scaling_factor: Scaling factor for each ring oscillator entry
+ * @ro_scaling_factor_common: Whether the ro_scaling_factor value is common for all fuses
+ * @init_voltage_step: Voltage in uV for number of steps read from fuse array
+ * @init_voltage_width: Bit-width of the voltage read from the fuse array
+ * @sensor_range_start: First sensor ID used by a thread
+ * @sensor_range_end: Last sensor ID used by a thread
+ * @step_quot_init_min: Minimum achievable step quotient for this corner
+ * @step_quot_init_max: Maximum achievable step quotient for this corner
+ * @num_fuse_corners: Number of valid entries in fuse_corner_data
+ * @fuse_corner_data: Parameters for calculation of each fuse corner
+ */
+struct cpr_thread_desc {
+ u8 controller_id;
+ u8 hw_tid;
+ const int (*ro_scaling_factor)[CPR3_RO_COUNT];
+ bool ro_scaling_factor_common;
+ int init_voltage_step;
+ int init_voltage_width;
+ u8 sensor_range_start;
+ u8 sensor_range_end;
+ u8 step_quot_init_min;
+ u8 step_quot_init_max;
+ unsigned int num_fuse_corners;
+ struct fuse_corner_data *fuse_corner_data;
+};
+
+/*
+ * struct cpr_desc - Driver instance-wide CPR parameters
+ *
+ * @cpr_type: Type (base version) of the CPR controller
+ * @num_threads: Max. number of threads supported by this controller
+ * @timer_delay_us: Loop delay time in uS
+ * @timer_updn_delay_us: Voltage after-up/before-down delay time in uS
+ * @timer_cons_up: Wait between consecutive up requests in uS
+ * @timer_cons_down: Wait between consecutive down requests in uS
+ * @up_threshold: Generic corner up threshold
+ * @down_threshold: Generic corner down threshold
+ * @idle_clocks: CPR Sensor: idle timer in cpr clocks unit
+ * @count_mode: CPR Sensor: counting mode
+ * @count_repeat: CPR Sensor: number of times to repeat reading
+ * @gcnt_us: CPR measurement interval in uS
+ * @vreg_step_fixed: Regulator voltage per step (if vreg unusable)
+ * @vreg_step_up_limit: Num. of steps up at once before re-measuring sensors
+ * @vreg_step_down_limit: Num. of steps dn at once before re-measuring sensors
+ * @vdd_settle_time_us: Settling timer to account for one VDD supply step
+ * @corner_settle_time_us: Settle time for corner switch request
+ * @mem_acc_threshold: Memory Accelerator (MEM-ACC) voltage threshold
+ * @apm_threshold: Array Power Mux (APM) voltage threshold
+ * @apm_crossover: Array Power Mux (APM) corner crossover voltage
+ * @apm_hysteresis: Hysteresis for APM V-threshold related calculations
+ * @cpr_base_voltage: Safety: Absolute minimum voltage (uV) on this CPR
+ * @cpr_max_voltage: Safety: Absolute maximum voltage (uV) on this CPR
+ * @pd_throttle_val: CPR Power Domain throttle during voltage switch
+ * @threads: Array containing "CPR Thread" specific parameters
+ * @reduce_to_fuse_uV: Reduce corner max volts (if higher) to fuse ceiling
+ * @reduce_to_corner_uV: Reduce corner max volts (if higher) to corner ceil.
+ * @hw_closed_loop_en: Enable CPR HW Closed-Loop voltage auto-adjustment
+ */
+struct cpr_desc {
+ enum cpr_type cpr_type;
+ unsigned int num_threads;
+ unsigned int timer_delay_us;
+ u8 timer_updn_delay_us;
+ u8 timer_cons_up;
+ u8 timer_cons_down;
+ u8 up_threshold;
+ u8 down_threshold;
+ u8 idle_clocks;
+ u8 count_mode;
+ u8 count_repeat;
+ u8 gcnt_us;
+ u16 vreg_step_fixed;
+ u8 vreg_step_up_limit;
+ u8 vreg_step_down_limit;
+ u8 vdd_settle_time_us;
+ u8 corner_settle_time_us;
+ int mem_acc_threshold;
+ int apm_threshold;
+ int apm_crossover;
+ int apm_hysteresis;
+ u32 cpr_base_voltage;
+ u32 cpr_max_voltage;
+ u32 pd_throttle_val;
+
+ const struct cpr_thread_desc **threads;
+ bool reduce_to_fuse_uV;
+ bool reduce_to_corner_uV;
+ bool hw_closed_loop_en;
+};
+
+struct cpr_drv;
+struct cpr_thread {
+ int num_corners;
+ int id;
+ bool enabled;
+ void __iomem *base;
+ struct clk *cpu_clk;
+ struct corner *corner;
+ struct corner *corners;
+ struct fuse_corner *fuse_corners;
+ struct cpr_drv *drv;
+ struct cpr_ext_data ext_data;
+ struct generic_pm_domain pd;
+ struct device *attached_cpu_dev;
+ struct work_struct restart_work;
+ bool restarting;
+
+ const struct cpr_fuse *cpr_fuses;
+ const struct cpr_thread_desc *desc;
+};
+
+struct cpr_drv {
+ int irq;
+ unsigned int ref_clk_khz;
+ struct device *dev;
+ struct mutex lock;
+ struct regulator *vreg;
+ struct regmap *tcsr;
+ u32 gcnt;
+ u32 speed_bin;
+ u32 fusing_rev;
+ u32 last_uV;
+ u32 cpr_hw_rev;
+ u32 reg_corner;
+ u32 reg_corner_tid;
+ u32 reg_ctl;
+ u32 reg_status;
+ int fuse_level_set;
+ int extra_corners;
+ unsigned int vreg_step;
+ bool enabled;
+
+ struct cpr_thread *threads;
+ struct genpd_onecell_data cell_data;
+
+ const struct cpr_desc *desc;
+ const struct acc_desc *acc_desc;
+ struct dentry *debugfs;
+};
+
+/**
+ * cpr_get_corner_post_vadj() - Get corner post-voltage adjustment values
+ * @opp: Pointer to the corresponding OPP struct
+ * @tid: CPR thread ID
+ * @open_loop: Pointer to the closed-loop adjustment value
+ * @closed_loop: Pointer to the open-loop adjustment value
+ *
+ * Return: 0 on success, negative errno on failure
+ */
+static int cpr_get_corner_post_vadj(struct dev_pm_opp *opp, u32 tid,
+ s32 *open_loop, s32 *closed_loop)
+{
+ struct device_node *np;
+ int ret;
+
+ /*
+ * There is no of_property_read_s32_index, so we just store the
+ * result into a s32 variable. After all, the OF API is doing
+ * the exact same for of_property_read_s32...
+ */
+ np = dev_pm_opp_get_of_node(opp);
+
+ ret = of_property_read_u32_index(np, "qcom,opp-oloop-vadj",
+ tid, open_loop);
+ if (ret)
+ goto out;
+
+ ret = of_property_read_u32_index(np, "qcom,opp-cloop-vadj",
+ tid, closed_loop);
+
+out:
+ of_node_put(np);
+ return ret;
+}
+
+static void cpr_write(struct cpr_thread *thread, u32 offset, u32 value)
+{
+ writel(value, thread->base + offset);
+}
+
+static u32 cpr_read(struct cpr_thread *thread, u32 offset)
+{
+ return readl(thread->base + offset);
+}
+
+static void
+cpr_masked_write(struct cpr_thread *thread, u32 offset, u32 mask, u32 value)
+{
+ u32 val;
+
+ val = readl(thread->base + offset);
+ val &= ~mask;
+ val |= value & mask;
+ writel(val, thread->base + offset);
+}
+
+static void cpr_irq_clr(struct cpr_thread *thread)
+{
+ cpr_write(thread, CPR3_REG_IRQ_CLEAR, CPR3_IRQ_ALL);
+}
+
+static void cpr_irq_clr_nack(struct cpr_thread *thread)
+{
+ cpr_irq_clr(thread);
+ cpr_write(thread, CPR3_REG_CONT_CMD, CPR3_CONT_CMD_NACK);
+}
+
+static void cpr_irq_clr_ack(struct cpr_thread *thread)
+{
+ cpr_irq_clr(thread);
+ cpr_write(thread, CPR3_REG_CONT_CMD, CPR3_CONT_CMD_ACK);
+}
+
+static void cpr_irq_set(struct cpr_thread *thread, u32 int_bits)
+{
+ /* On CPR-hardened, interrupts are managed by and on firmware */
+ if (thread->drv->desc->cpr_type == CTRL_TYPE_CPRH)
+ return;
+
+ cpr_write(thread, CPR3_REG_IRQ_EN, int_bits);
+}
+
+/**
+ * cpr_ctl_enable() - Enable CPR thread
+ * @thread: Structure holding CPR thread-specific parameters
+ */
+static void cpr_ctl_enable(struct cpr_thread *thread)
+{
+ if (thread->drv->enabled && !thread->restarting) {
+ cpr_masked_write(thread, CPR3_REG_CPR_CTL,
+ CPR3_CPR_CTL_LOOP_EN_MASK,
+ CPR3_CPR_CTL_LOOP_EN_MASK);
+ }
+}
+
+/**
+ * cpr_ctl_disable() - Disable CPR thread
+ * @thread: Structure holding CPR thread-specific parameters
+ */
+static void cpr_ctl_disable(struct cpr_thread *thread)
+{
+ const struct cpr_desc *desc = thread->drv->desc;
+
+ if (desc->cpr_type != CTRL_TYPE_CPRH) {
+ cpr_irq_set(thread, 0);
+ cpr_irq_clr(thread);
+ }
+
+ cpr_masked_write(thread, CPR3_REG_CPR_CTL,
+ CPR3_CPR_CTL_LOOP_EN_MASK, 0);
+}
+
+/**
+ * cpr_ctl_is_enabled() - Check if thread is enabled
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * Return: true if the CPR is enabled, false if it is disabled.
+ */
+static bool cpr_ctl_is_enabled(struct cpr_thread *thread)
+{
+ u32 reg_val;
+
+ reg_val = cpr_read(thread, CPR3_REG_CPR_CTL);
+ return reg_val & CPR3_CPR_CTL_LOOP_EN_MASK;
+}
+
+/**
+ * cpr_check_any_thread_busy() - Check if HW is done processing
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * Return: true if the CPR is busy, false if it is ready.
+ */
+static bool cpr_check_any_thread_busy(struct cpr_thread *thread)
+{
+ int i;
+
+ for (i = 0; i < thread->drv->desc->num_threads; i++)
+ if (cpr_read(thread, CPR3_REG_RESULT0(i)) &
+ CPR3_RESULT0_BUSY_MASK)
+ return true;
+
+ return false;
+}
+
+static void cpr_restart_worker(struct work_struct *work)
+{
+ struct cpr_thread *thread = container_of(work, struct cpr_thread,
+ restart_work);
+ struct cpr_drv *drv = thread->drv;
+ int i;
+
+ mutex_lock(&drv->lock);
+
+ thread->restarting = true;
+ cpr_ctl_disable(thread);
+ disable_irq(drv->irq);
+
+ mutex_unlock(&drv->lock);
+
+ for (i = 0; i < 20; i++) {
+ u32 cpr_status = cpr_read(thread, CPR3_REG_CPR_STATUS);
+ u32 ctl = cpr_read(thread, CPR3_REG_CPR_CTL);
+
+ if ((cpr_status & CPR3_CPR_STATUS_BUSY_MASK) &&
+ !(ctl & CPR3_CPR_CTL_LOOP_EN_MASK))
+ break;
+
+ udelay(10);
+ }
+
+ cpr_irq_clr(thread);
+
+ for (i = 0; i < 20; i++) {
+ u32 status = cpr_read(thread, CPR3_REG_IRQ_STATUS);
+
+ if (!(status & CPR3_IRQ_ALL))
+ break;
+ udelay(10);
+ }
+
+ mutex_lock(&drv->lock);
+
+ thread->restarting = false;
+ enable_irq(drv->irq);
+ cpr_ctl_enable(thread);
+
+ mutex_unlock(&drv->lock);
+}
+
+/**
+ * cpr_corner_restore() - Restore saved corner level
+ * @thread: Structure holding CPR thread-specific parameters
+ * @corner: Structure holding the saved corner level
+ */
+static void cpr_corner_restore(struct cpr_thread *thread,
+ struct corner *corner)
+{
+ struct cpr_drv *drv = thread->drv;
+ struct fuse_corner *fuse = corner->fuse_corner;
+ const struct cpr_thread_desc *tdesc = thread->desc;
+ u32 ro_sel = fuse->ring_osc_idx;
+
+ cpr_write(thread, CPR3_REG_GCNT(ro_sel), drv->gcnt);
+
+ cpr_write(thread, CPR3_REG_RO_MASK(tdesc->hw_tid),
+ CPR3_RO_MASK & ~BIT(ro_sel));
+
+ cpr_write(thread, CPR3_REG_TARGET_QUOT(tdesc->hw_tid, ro_sel),
+ fuse->quot - corner->quot_adjust);
+
+ if (drv->desc->cpr_type == CTRL_TYPE_CPR4)
+ cpr_masked_write(thread,
+ CPR4_REG_CPR_MASK_THREAD(tdesc->hw_tid),
+ CPR4_CPR_MASK_THREAD_DISABLE_THREAD |
+ CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK, 0);
+
+ thread->corner = corner;
+ corner->last_uV = corner->uV;
+}
+
+/**
+ * cpr_set_acc() - Set fuse level to the mem-acc
+ * @drv: Main driver structure
+ * @f: Fuse level
+ */
+static void cpr_set_acc(struct cpr_drv *drv, int f)
+{
+ const struct acc_desc *desc = drv->acc_desc;
+ struct reg_sequence *s = desc->settings;
+ int n = desc->num_regs_per_fuse;
+
+ if (!s || f == drv->fuse_level_set)
+ return;
+
+ regmap_multi_reg_write(drv->tcsr, s + (n * f), n);
+ drv->fuse_level_set = f;
+}
+
+/**
+ * cpr_pre_voltage() - Actions to execute before setting voltage
+ * @thread: Structure holding CPR thread-specific parameters
+ * @dir: Enumeration for voltage change direction
+ * @fuse_level: Fuse corner for mem-acc, if supported.
+ *
+ * Return: Zero for success or negative number on errors.
+ */
+static int cpr_pre_voltage(struct cpr_thread *thread,
+ enum voltage_change_dir dir,
+ int fuse_level)
+{
+ struct cpr_drv *drv = thread->drv;
+
+ if (drv->desc->cpr_type == CTRL_TYPE_CPR3 &&
+ drv->desc->pd_throttle_val)
+ cpr_write(thread, CPR3_REG_PD_THROTTLE,
+ drv->desc->pd_throttle_val);
+
+ if (drv->tcsr && dir == DOWN)
+ cpr_set_acc(drv, fuse_level);
+
+ return 0;
+}
+
+/**
+ * cpr_post_voltage() - Actions to execute after setting voltage
+ * @thread: Structure holding CPR thread-specific parameters
+ * @dir: Enumeration for voltage change direction
+ * @fuse_level: Fuse corner for mem-acc, if supported.
+ *
+ * Return: Zero for success or negative number on errors.
+ */
+static int cpr_post_voltage(struct cpr_thread *thread,
+ enum voltage_change_dir dir,
+ int fuse_level)
+{
+ struct cpr_drv *drv = thread->drv;
+
+ if (drv->tcsr && dir == UP)
+ cpr_set_acc(drv, fuse_level);
+
+ if (drv->desc->cpr_type == CTRL_TYPE_CPR3)
+ cpr_write(thread, CPR3_REG_PD_THROTTLE, 0);
+
+ return 0;
+}
+
+/**
+ * cpr_commit_state() - Set the newly requested voltage
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * Return: IRQ_SUCCESS for success, IRQ_NONE if the CPR is disabled.
+ */
+static int cpr_commit_state(struct cpr_thread *thread)
+{
+ struct cpr_drv *drv = thread->drv;
+ int min_uV = 0, max_uV = 0, new_uV = 0, fuse_level = 0;
+ enum voltage_change_dir dir;
+ u32 next_irqmask = 0;
+ int ret, i;
+
+ /* On CPRhardened, control states are managed in firmware */
+ if (drv->desc->cpr_type == CTRL_TYPE_CPRH)
+ return 0;
+
+ for (i = 0; i < drv->desc->num_threads; i++) {
+ struct cpr_thread *thread = &drv->threads[i];
+
+ if (!thread->corner)
+ continue;
+
+ fuse_level = max(fuse_level,
+ (int) (thread->corner->fuse_corner -
+ &thread->fuse_corners[0]));
+
+ max_uV = max(max_uV, thread->corner->max_uV);
+ min_uV = max(min_uV, thread->corner->min_uV);
+ new_uV = max(new_uV, thread->corner->last_uV);
+ }
+ dev_vdbg(drv->dev, "%s: new uV: %d, last uV: %d\n",
+ __func__, new_uV, drv->last_uV);
+
+ /*
+ * Safety measure: if the voltage is out of the globally allowed
+ * range, then go out and warn the user.
+ * This should *never* happen.
+ */
+ if (new_uV > drv->desc->cpr_max_voltage ||
+ new_uV < drv->desc->cpr_base_voltage) {
+ dev_warn(drv->dev, "Voltage (%u uV) out of range.", new_uV);
+ return -EINVAL;
+ }
+
+ if (new_uV == drv->last_uV || fuse_level == drv->fuse_level_set)
+ goto out;
+
+ if (fuse_level > drv->fuse_level_set)
+ dir = UP;
+ else
+ dir = DOWN;
+
+ ret = cpr_pre_voltage(thread, fuse_level, dir);
+ if (ret)
+ return ret;
+
+ dev_vdbg(drv->dev, "setting voltage: %d\n", new_uV);
+
+ ret = regulator_set_voltage(drv->vreg, new_uV, new_uV);
+ if (ret) {
+ dev_err_ratelimited(drv->dev, "failed to set voltage %d: %d\n", new_uV, ret);
+ return ret;
+ }
+
+ ret = cpr_post_voltage(thread, fuse_level, dir);
+ if (ret)
+ return ret;
+
+ drv->last_uV = new_uV;
+out:
+ if (new_uV > min_uV)
+ next_irqmask |= CPR3_IRQ_DOWN;
+ if (new_uV < max_uV)
+ next_irqmask |= CPR3_IRQ_UP;
+
+ cpr_irq_set(thread, next_irqmask);
+
+ return 0;
+}
+
+static unsigned int cpr_get_cur_perf_state(struct cpr_thread *thread)
+{
+ return thread->corner ? thread->corner - thread->corners + 1 : 0;
+}
+
+/**
+ * cpr_scale() - Calculate new voltage for the received direction
+ * @thread: Structure holding CPR thread-specific parameters
+ * @dir: Enumeration for voltage change direction
+ *
+ * The CPR scales one by one: this function calculates the new
+ * voltage to set when a voltage-UP or voltage-DOWN request comes
+ * and stores it into the per-thread structure that gets passed.
+ */
+static void cpr_scale(struct cpr_thread *thread, enum voltage_change_dir dir)
+{
+ struct cpr_drv *drv = thread->drv;
+ const struct cpr_thread_desc *tdesc = thread->desc;
+ u32 val, error_steps;
+ int last_uV, new_uV;
+ struct corner *corner;
+
+ if (dir != UP && dir != DOWN)
+ return;
+
+ corner = thread->corner;
+ val = cpr_read(thread, CPR3_REG_RESULT0(tdesc->hw_tid));
+ error_steps = FIELD_GET(CPR3_RESULT0_ERROR_STEPS_MASK, val);
+
+ last_uV = corner->last_uV;
+
+ if (dir == UP) {
+ if (!(val & CPR3_RESULT0_STEP_UP_MASK))
+ return;
+
+ /* Calculate new voltage */
+ new_uV = last_uV + drv->vreg_step;
+ new_uV = min(new_uV, corner->max_uV);
+
+ dev_vdbg(drv->dev, "[T%u] UP - new_uV=%d last_uV=%d p-state=%u st=%u\n",
+ thread->id, new_uV, last_uV,
+ cpr_get_cur_perf_state(thread), error_steps);
+ } else {
+ if (!(val & CPR3_RESULT0_STEP_DN_MASK))
+ return;
+
+ /* Calculate new voltage */
+ new_uV = last_uV - drv->vreg_step;
+ new_uV = max(new_uV, corner->min_uV);
+ dev_vdbg(drv->dev, "[T%u] DOWN - new_uV=%d last_uV=%d p-state=%u st=%u\n",
+ thread->id, new_uV, last_uV,
+ cpr_get_cur_perf_state(thread), error_steps);
+ }
+ corner->last_uV = new_uV;
+}
+
+/**
+ * cpr_irq_handler() - Handle CPR3/CPR4 status interrupts
+ * @irq: Number of the interrupt
+ * @dev: Pointer to the cpr_thread structure
+ *
+ * Handle the interrupts coming from non-hardened CPR HW as to get
+ * an ok to scale voltages immediately, or to pass error status to
+ * the hardware (either success/ACK or failure/NACK).
+ *
+ * Return: IRQ_SUCCESS for success, IRQ_NONE if the CPR is disabled.
+ */
+static irqreturn_t cpr_irq_handler(int irq, void *dev)
+{
+ struct cpr_thread *thread = dev;
+ struct cpr_drv *drv = thread->drv;
+ irqreturn_t ret = IRQ_HANDLED;
+ int i, rc;
+ enum voltage_change_dir dir = NO_CHANGE;
+ u32 val;
+
+ mutex_lock(&drv->lock);
+
+ val = cpr_read(thread, CPR3_REG_IRQ_STATUS);
+
+ dev_vdbg(drv->dev, "IRQ_STATUS = 0x%x\n", val);
+
+ if (!cpr_ctl_is_enabled(thread)) {
+ dev_vdbg(drv->dev, "CPR is disabled\n");
+ ret = IRQ_NONE;
+ } else if (cpr_check_any_thread_busy(thread)) {
+ cpr_irq_clr_nack(thread);
+ dev_dbg(drv->dev, "CPR measurement is not ready\n");
+ } else {
+ /*
+ * Following sequence of handling is as per each IRQ's
+ * priority
+ */
+ if (val & CPR3_IRQ_UP)
+ dir = UP;
+ else if (val & CPR3_IRQ_DOWN)
+ dir = DOWN;
+
+ if (dir != NO_CHANGE) {
+ for (i = 0; i < drv->desc->num_threads; i++) {
+ thread = &drv->threads[i];
+ cpr_scale(thread, dir);
+ }
+
+ rc = cpr_commit_state(thread);
+ if (rc)
+ cpr_irq_clr_nack(thread);
+ else
+ cpr_irq_clr_ack(thread);
+ } else if (val & CPR3_IRQ_MID) {
+ dev_dbg(drv->dev, "IRQ occurred for Mid Flag\n");
+ } else {
+ dev_warn(drv->dev, "IRQ occurred for unknown flag (%#08x)\n", val);
+ schedule_work(&thread->restart_work);
+ }
+ }
+
+ mutex_unlock(&drv->lock);
+
+ return ret;
+}
+
+static int cpr_switch(struct cpr_drv *drv)
+{
+ int i, ret;
+ bool enabled = false;
+
+ if (drv->desc->cpr_type == CTRL_TYPE_CPRH)
+ return 0;
+
+ for (i = 0; i < drv->desc->num_threads && !enabled; i++)
+ enabled = drv->threads[i].enabled;
+
+ dev_vdbg(drv->dev, "%s: enabled = %d\n", __func__, enabled);
+
+ if (enabled == drv->enabled)
+ return 0;
+
+ if (enabled) {
+ ret = regulator_enable(drv->vreg);
+ if (ret)
+ return ret;
+
+ drv->enabled = enabled;
+
+ for (i = 0; i < drv->desc->num_threads; i++)
+ if (drv->threads[i].corner)
+ break;
+
+ if (i < drv->desc->num_threads) {
+ cpr_irq_clr(&drv->threads[i]);
+
+ cpr_commit_state(&drv->threads[i]);
+ cpr_ctl_enable(&drv->threads[i]);
+ }
+ } else {
+ for (i = 0; i < drv->desc->num_threads && !enabled; i++)
+ cpr_ctl_disable(&drv->threads[i]);
+
+ drv->enabled = enabled;
+
+ ret = regulator_disable(drv->vreg);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * cpr_enable() - Enables a CPR thread
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * Return: Zero for success or negative number on errors.
+ */
+static int cpr_enable(struct cpr_thread *thread)
+{
+ struct cpr_drv *drv = thread->drv;
+ int ret;
+
+ dev_dbg(drv->dev, "Enabling thread %d\n", thread->id);
+
+ mutex_lock(&drv->lock);
+
+ thread->enabled = true;
+ ret = cpr_switch(thread->drv);
+
+ mutex_unlock(&drv->lock);
+
+ return ret;
+}
+
+/**
+ * cpr_disable() - Disables a CPR thread
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * Return: Zero for success or negative number on errors.
+ */
+static int cpr_disable(struct cpr_thread *thread)
+{
+ struct cpr_drv *drv = thread->drv;
+ int ret;
+
+ dev_dbg(drv->dev, "Disabling thread %d\n", thread->id);
+
+ mutex_lock(&drv->lock);
+
+ thread->enabled = false;
+ ret = cpr_switch(thread->drv);
+
+ mutex_unlock(&drv->lock);
+
+ return ret;
+}
+
+/**
+ * cpr_configure() - Configure main HW parameters
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * This function configures the main CPR hardware parameters, such as
+ * internal timers (and delays), sensor ownerships, activates and/or
+ * deactivates cpr-threads and others, as one sequence for all of the
+ * versions supported in this driver. By design, the function may
+ * return a success earlier if the sequence for "a previous version"
+ * has ended.
+ *
+ * Context: The CPR must be clocked before calling this function!
+ *
+ * Return: Zero for success or negative number on errors.
+ */
+static int cpr_configure(struct cpr_thread *thread)
+{
+ struct cpr_drv *drv = thread->drv;
+ const struct cpr_desc *desc = drv->desc;
+ const struct cpr_thread_desc *tdesc = thread->desc;
+ u32 val;
+ int i;
+
+ /* Disable interrupt and CPR */
+ cpr_irq_set(thread, 0);
+ cpr_write(thread, CPR3_REG_CPR_CTL, 0);
+
+ /* Init and save gcnt */
+ drv->gcnt = drv->ref_clk_khz * desc->gcnt_us;
+ do_div(drv->gcnt, 1000);
+
+ /* Program the delay count for the timer */
+ val = drv->ref_clk_khz * desc->timer_delay_us;
+ do_div(val, 1000);
+ if (desc->cpr_type == CTRL_TYPE_CPR3) {
+ cpr_write(thread, CPR3_REG_CPR_TIMER_MID_CONT, val);
+
+ val = drv->ref_clk_khz * desc->timer_updn_delay_us;
+ do_div(val, 1000);
+ cpr_write(thread, CPR3_REG_CPR_TIMER_UP_DN_CONT, val);
+ } else {
+ cpr_write(thread, CPR3_REG_CPR_TIMER_AUTO_CONT, val);
+ }
+ dev_dbg(drv->dev, "Timer count: %#0x (for %d us)\n", val,
+ desc->timer_delay_us);
+
+ /* Program the control register */
+ val = FIELD_PREP(CPR3_CPR_CTL_IDLE_CLOCKS_MASK, desc->idle_clocks) |
+ FIELD_PREP(CPR3_CPR_CTL_COUNT_MODE_MASK, desc->count_mode) |
+ FIELD_PREP(CPR3_CPR_CTL_COUNT_REPEAT_MASK, desc->count_repeat);
+ cpr_write(thread, CPR3_REG_CPR_CTL, val);
+
+ /* Configure CPR default step quotients */
+ val = FIELD_PREP(CPR3_CPR_STEP_QUOT_MIN_MASK, tdesc->step_quot_init_min) |
+ FIELD_PREP(CPR3_CPR_STEP_QUOT_MAX_MASK, tdesc->step_quot_init_max);
+
+ cpr_write(thread, CPR3_REG_CPR_STEP_QUOT, val);
+
+ /*
+ * Configure the CPR sensor ownership always on thread 0
+ * TODO: SDM845 has different ownership for sensors!!
+ */
+ for (i = tdesc->sensor_range_start; i < tdesc->sensor_range_end; i++)
+ cpr_write(thread, CPR3_REG_SENSOR_OWNER(i), 0);
+
+ /* Program Consecutive Up & Down */
+ val = FIELD_PREP(CPR3_THRESH_CONS_DOWN_MASK, desc->timer_cons_down) |
+ FIELD_PREP(CPR3_THRESH_CONS_UP_MASK, desc->timer_cons_up) |
+ FIELD_PREP(CPR3_THRESH_DOWN_THRESH_MASK, desc->down_threshold) |
+ FIELD_PREP(CPR3_THRESH_UP_THRESH_MASK, desc->up_threshold);
+ cpr_write(thread, CPR3_REG_THRESH(tdesc->hw_tid), val);
+
+ /* Mask all ring oscillators for all threads initially */
+ cpr_write(thread, CPR3_REG_RO_MASK(tdesc->hw_tid), CPR3_RO_MASK);
+
+ /* HW Closed-loop control */
+ if (desc->cpr_type == CTRL_TYPE_CPR3) {
+ cpr_write(thread, CPR3_REG_HW_CLOSED_LOOP_DISABLED,
+ !desc->hw_closed_loop_en);
+ } else {
+ cpr_masked_write(thread, CPR4_REG_MARGIN_ADJ_CTL,
+ CPR4_MARGIN_ADJ_HW_CLOSED_LOOP_EN,
+ desc->hw_closed_loop_en ?
+ CPR4_MARGIN_ADJ_HW_CLOSED_LOOP_EN : 0);
+ }
+
+ /* Additional configuration for CPR4 and beyond */
+ if (desc->cpr_type < CTRL_TYPE_CPR4)
+ return 0;
+
+ /* Disable threads initially only on non-hardened CPR4 */
+ if (desc->cpr_type == CTRL_TYPE_CPR4)
+ cpr_masked_write(thread, CPR4_REG_CPR_MASK_THREAD(1),
+ CPR4_CPR_MASK_THREAD_DISABLE_THREAD |
+ CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK,
+ CPR4_CPR_MASK_THREAD_DISABLE_THREAD |
+ CPR4_CPR_MASK_THREAD_RO_MASK4THREAD_MASK);
+
+ if (tdesc->hw_tid > 0)
+ cpr_masked_write(thread, CPR4_REG_MISC,
+ CPR4_MISC_RESET_STEP_QUOT_LOOP_EN |
+ CPR4_MISC_THREAD_HAS_ALWAYS_VOTE_EN,
+ CPR4_MISC_RESET_STEP_QUOT_LOOP_EN |
+ CPR4_MISC_THREAD_HAS_ALWAYS_VOTE_EN);
+
+ val = drv->vreg_step;
+ do_div(val, 1000);
+ cpr_masked_write(thread, CPR4_REG_MARGIN_ADJ_CTL,
+ CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_MASK,
+ val << CPR4_MARGIN_ADJ_PMIC_STEP_SIZE_SHIFT);
+
+ cpr_masked_write(thread, CPR4_REG_SAW_ERROR_STEP_LIMIT,
+ CPR4_SAW_ERROR_STEP_LIMIT_DN_MASK,
+ desc->vreg_step_down_limit <<
+ CPR4_SAW_ERROR_STEP_LIMIT_DN_SHIFT);
+
+ cpr_masked_write(thread, CPR4_REG_SAW_ERROR_STEP_LIMIT,
+ CPR4_SAW_ERROR_STEP_LIMIT_UP_MASK,
+ desc->vreg_step_up_limit <<
+ CPR4_SAW_ERROR_STEP_LIMIT_UP_SHIFT);
+
+ cpr_masked_write(thread, CPR4_REG_MARGIN_ADJ_CTL,
+ CPR4_MARGIN_ADJ_PER_RO_KV_MARGIN_EN,
+ CPR4_MARGIN_ADJ_PER_RO_KV_MARGIN_EN);
+
+ if (tdesc->hw_tid > 0)
+ cpr_masked_write(thread, CPR4_REG_CPR_TIMER_CLAMP,
+ CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN,
+ CPR4_CPR_TIMER_CLAMP_THREAD_AGGREGATION_EN);
+
+ /* Settling timer to account for one VDD supply step */
+ if (desc->vdd_settle_time_us > 0) {
+ u32 m = CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_MASK;
+ u32 s = CPR4_MARGIN_TEMP_CORE_TIMERS_SETTLE_VOLTAGE_COUNT_SHFT;
+
+ cpr_masked_write(thread, CPR4_REG_MARGIN_TEMP_CORE_TIMERS,
+ m, desc->vdd_settle_time_us << s);
+ }
+
+ /* Additional configuration for CPR-hardened */
+ if (desc->cpr_type < CTRL_TYPE_CPRH)
+ return 0;
+
+ /* Settling timer to account for one corner-switch request */
+ if (desc->corner_settle_time_us > 0)
+ cpr_masked_write(thread, drv->reg_ctl,
+ CPRH_CTL_MODE_SWITCH_DELAY_MASK,
+ desc->corner_settle_time_us <<
+ CPRH_CTL_MODE_SWITCH_DELAY_SHIFT);
+
+ /* Base voltage and multiplier values for CPRh internal calculations */
+ cpr_masked_write(thread, drv->reg_ctl,
+ CPRH_CTL_BASE_VOLTAGE_MASK,
+ (DIV_ROUND_UP(desc->cpr_base_voltage,
+ drv->vreg_step) <<
+ CPRH_CTL_BASE_VOLTAGE_SHIFT));
+
+ cpr_masked_write(thread, drv->reg_ctl,
+ CPRH_CTL_VOLTAGE_MULTIPLIER_MASK,
+ DIV_ROUND_UP(drv->vreg_step, 1000) <<
+ CPRH_CTL_VOLTAGE_MULTIPLIER_SHIFT);
+
+ return 0;
+}
+
+static int cprh_dummy_set_performance_state(struct generic_pm_domain *domain,
+ unsigned int state)
+{
+ return 0;
+}
+
+static int cpr_set_performance_state(struct generic_pm_domain *domain,
+ unsigned int state)
+{
+ struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd);
+ struct cpr_drv *drv = thread->drv;
+ struct corner *corner, *end;
+ int ret = 0;
+
+ mutex_lock(&drv->lock);
+
+ dev_dbg(drv->dev, "setting perf state: %u (prev state: %u thread: %u)\n",
+ state, cpr_get_cur_perf_state(thread), thread->id);
+
+ /*
+ * Determine new corner we're going to.
+ * Remove one since lowest performance state is 1.
+ */
+ corner = thread->corners + state - 1;
+ end = &thread->corners[thread->num_corners - 1];
+ if (corner > end || corner < thread->corners) {
+ ret = -EINVAL;
+ goto unlock;
+ }
+
+ cpr_ctl_disable(thread);
+
+ cpr_irq_clr(thread);
+ if (thread->corner != corner)
+ cpr_corner_restore(thread, corner);
+
+ ret = cpr_commit_state(thread);
+ if (ret)
+ goto unlock;
+
+ cpr_ctl_enable(thread);
+unlock:
+ mutex_unlock(&drv->lock);
+
+ dev_dbg(drv->dev, "set perf state %u on thread %u\n", state, thread->id);
+
+ return ret;
+}
+
+/**
+ * cpr3_adjust_quot - Adjust the closed-loop quotients
+ * @ring_osc_factor: Ring oscillator adjustment factor
+ * @volt_closed_loop: Closed-loop voltage adjustment factor
+ *
+ * Calculates the quotient adjustment factor based on closed-loop
+ * quotients and ring oscillator factor.
+ *
+ * Return: Adjusted quotient
+ */
+static int cpr3_adjust_quot(int ring_osc_factor, int volt_closed_loop)
+{
+ s64 temp;
+
+ if (ring_osc_factor == 0 || volt_closed_loop == 0)
+ return 0;
+
+ temp = (s64)(ring_osc_factor * volt_closed_loop);
+ return (int)div_s64(temp, 1000000);
+}
+
+/**
+ * cpr_fuse_corner_init() - Calculate fuse corner table
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * This function populates the fuse corners table by reading the
+ * values from the fuses, eventually adjusting them with a fixed
+ * per-corner offset and doing basic checks about them being
+ * supported by the regulator that is assigned to this CPR - if
+ * it is available (on CPR-Hardened, there is no usable vreg, as
+ * that is protected by the hypervisor).
+ *
+ * Return: Zero for success, negative number on error
+ */
+static int cpr_fuse_corner_init(struct cpr_thread *thread)
+{
+ struct cpr_drv *drv = thread->drv;
+ const struct cpr_thread_desc *desc = thread->desc;
+ const struct cpr_fuse *cpr_fuse = thread->cpr_fuses;
+ struct fuse_corner_data *fdata;
+ struct fuse_corner *fuse, *prev_fuse, *end;
+ int i, ret;
+
+ /* Populate fuse_corner members */
+ fuse = thread->fuse_corners;
+ prev_fuse = &fuse[0];
+ end = &fuse[desc->num_fuse_corners - 1];
+ fdata = desc->fuse_corner_data;
+
+ for (i = 0; fuse <= end; fuse++, cpr_fuse++, i++, fdata++) {
+ int sf_idx = desc->ro_scaling_factor_common ? 0 : i;
+ int factor = desc->ro_scaling_factor[sf_idx][fuse->ring_osc_idx];
+
+ ret = cpr_populate_fuse_common(drv->dev, fdata, cpr_fuse,
+ fuse, drv->vreg_step,
+ desc->init_voltage_width,
+ desc->init_voltage_step);
+ if (ret)
+ return ret;
+
+ /*
+ * Adjust the fuse quot with per-fuse-corner closed-loop
+ * voltage adjustment parameters.
+ */
+ fuse->quot += cpr3_adjust_quot(factor, fdata->volt_cloop_adjust);
+
+ /* CPRh: no regulator access... */
+ if (drv->desc->cpr_type == CTRL_TYPE_CPRH)
+ goto skip_pvs_restrict;
+
+ /* Re-check if corner voltage range is supported by regulator */
+ ret = cpr_check_vreg_constraints(drv->dev, drv->vreg, fuse);
+ if (ret)
+ return ret;
+
+skip_pvs_restrict:
+ if (fuse->uV < prev_fuse->uV)
+ fuse->uV = prev_fuse->uV;
+ prev_fuse = fuse;
+ dev_dbg(drv->dev, "fuse corner %d: [%d %d %d] RO%u quot %d\n",
+ i, fuse->min_uV, fuse->uV, fuse->max_uV,
+ fuse->ring_osc_idx, fuse->quot);
+
+ /* Check if constraints are valid */
+ if (fuse->uV < fuse->min_uV || fuse->uV > fuse->max_uV) {
+ dev_err(drv->dev, "fuse corner %d: Bad voltage range.\n", i);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void cpr3_restrict_corner(struct corner *corner, int threshold,
+ int hysteresis, int step)
+{
+ if (threshold > corner->min_uV && threshold <= corner->max_uV) {
+ if (corner->uV >= threshold) {
+ corner->min_uV = max(corner->min_uV,
+ threshold - hysteresis);
+ if (corner->min_uV > corner->uV)
+ corner->uV = corner->min_uV;
+ } else {
+ corner->max_uV = threshold;
+ corner->max_uV -= step;
+ }
+ }
+}
+
+/*
+ * cprh_corner_adjust_opps() - Set voltage on each CPU OPP table entry
+ *
+ * On CPR-Hardened, the voltage level is controlled internally through
+ * the OSM hardware: in order to initialize the latter, we have to
+ * communicate the voltage to its driver, so that it will be able to
+ * write the right parameters (as they have to be set both on the CPRh
+ * and on the OSM) on it.
+ * This function is called only for CPRh.
+ *
+ * Return: Zero for success, negative number for error.
+ */
+static int cprh_corner_adjust_opps(struct cpr_thread *thread)
+{
+ struct corner *corner = thread->corners;
+ struct cpr_drv *drv = thread->drv;
+ int i, ret;
+
+ for (i = 0; i < thread->num_corners; i++) {
+ ret = dev_pm_opp_adjust_voltage(thread->attached_cpu_dev,
+ corner[i].freq,
+ corner[i].uV,
+ corner[i].min_uV,
+ corner[i].max_uV);
+ if (ret)
+ break;
+
+ dev_dbg(drv->dev, "OPP voltage adjusted for %llu Hz, %d uV\n",
+ corner[i].freq, corner[i].uV);
+ }
+
+ /* If we couldn't adjust voltage for all corners, something went wrong */
+ if (i < thread->num_corners)
+ return -EINVAL;
+
+ return ret;
+}
+
+/**
+ * cpr3_corner_init() - Calculate and set-up corners for the CPR HW
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * This function calculates all the corner parameters by comparing
+ * and interpolating the values read from the various set-points
+ * read from the fuses (also called "fuse corners") to generate and
+ * program to the CPR a lookup table that describes each voltage
+ * step, mapped to a performance level (or corner number).
+ *
+ * It also programs other essential parameters on the CPR and - if
+ * we are dealing with CPR-Hardened, it will also enable the internal
+ * interface between the Operating State Manager (OSM) and the CPRh
+ * in order to achieve CPU DVFS.
+ *
+ * Return: Zero for success, negative number on error
+ */
+static int cpr3_corner_init(struct cpr_thread *thread)
+{
+ struct cpr_drv *drv = thread->drv;
+ const struct cpr_desc *desc = drv->desc;
+ const struct cpr_thread_desc *tdesc = thread->desc;
+ const struct cpr_fuse *fuses = thread->cpr_fuses;
+ int i, ret, total_corners, extra_corners, level, scaling = 0;
+ unsigned int fnum, fc;
+ const char *quot_offset;
+ const struct fuse_corner_data *fdata;
+ struct fuse_corner *fuse, *prev_fuse;
+ struct corner *corner, *prev_corner, *end;
+ struct corner_data *cdata;
+ struct dev_pm_opp *opp;
+ u32 ring_osc_mask = CPR3_RO_MASK, min_quotient = U32_MAX;
+ u64 freq;
+
+ corner = thread->corners;
+ prev_corner = &thread->corners[0];
+ end = &corner[thread->num_corners - 1];
+
+ cdata = devm_kcalloc(drv->dev, thread->num_corners + drv->extra_corners,
+ sizeof(struct corner_data), GFP_KERNEL);
+ if (!cdata)
+ return -ENOMEM;
+
+ for (level = 1; level <= thread->num_corners; level++) {
+ opp = dev_pm_opp_find_level_exact(&thread->pd.dev, level);
+ if (IS_ERR(opp))
+ return -EINVAL;
+
+ fc = cpr_get_fuse_corner(opp, thread->id);
+ if (!fc) {
+ dev_pm_opp_put(opp);
+ return -EINVAL;
+ }
+ fnum = fc - 1;
+
+ freq = cpr_get_opp_hz_for_req(opp, thread->attached_cpu_dev);
+ if (!freq) {
+ thread->num_corners = max(level - 1, 0);
+ end = &thread->corners[thread->num_corners - 1];
+ break;
+ }
+
+ ret = cpr_get_corner_post_vadj(opp, thread->id,
+ &cdata[level - 1].oloop_vadj,
+ &cdata[level - 1].cloop_vadj);
+ if (ret) {
+ dev_pm_opp_put(opp);
+ return ret;
+ }
+
+ cdata[level - 1].fuse_corner = fnum;
+ cdata[level - 1].freq = freq;
+
+ fuse = &thread->fuse_corners[fnum];
+ dev_dbg(drv->dev, "freq: %llu level: %u fuse level: %u\n",
+ freq, dev_pm_opp_get_level(opp) - 1, fnum);
+ if (freq > fuse->max_freq)
+ fuse->max_freq = freq;
+ dev_pm_opp_put(opp);
+
+ /*
+ * Make sure that the frequencies in the table are in ascending
+ * order, as this is critical for the algorithm to work.
+ */
+ if (cdata[level - 2].freq > freq) {
+ dev_err(drv->dev, "Frequency table not in ascending order.\n");
+ return -EINVAL;
+ }
+ }
+
+ if (thread->num_corners < 2) {
+ dev_err(drv->dev, "need at least 2 OPPs to use CPR\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Get the quotient adjustment scaling factor, according to:
+ *
+ * scaling = min(1000 * (QUOT(corner_N) - QUOT(corner_N-1))
+ * / (freq(corner_N) - freq(corner_N-1)), max_factor)
+ *
+ * QUOT(corner_N): quotient read from fuse for fuse corner N
+ * QUOT(corner_N-1): quotient read from fuse for fuse corner (N - 1)
+ * freq(corner_N): max frequency in MHz supported by fuse corner N
+ * freq(corner_N-1): max frequency in MHz supported by fuse corner
+ * (N - 1)
+ *
+ * Then walk through the corners mapped to each fuse corner
+ * and calculate the quotient adjustment for each one using the
+ * following formula:
+ *
+ * quot_adjust = (freq_max - freq_corner) * scaling / 1000
+ *
+ * freq_max: max frequency in MHz supported by the fuse corner
+ * freq_corner: frequency in MHz corresponding to the corner
+ * scaling: calculated from above equation
+ *
+ *
+ * + +
+ * | v |
+ * q | f c o | f c
+ * u | c l | c
+ * o | f t | f
+ * t | c a | c
+ * | c f g | c f
+ * | e |
+ * +--------------- +----------------
+ * 0 1 2 3 4 5 6 0 1 2 3 4 5 6
+ * corner corner
+ *
+ * c = corner
+ * f = fuse corner
+ *
+ */
+ for (i = 0; corner <= end; corner++, i++) {
+ int ro_fac, sf_idx, vadj, prev_quot;
+ u64 freq_diff_mhz;
+
+ fnum = cdata[i].fuse_corner;
+ fdata = &tdesc->fuse_corner_data[fnum];
+ quot_offset = fuses[fnum].quotient_offset;
+ fuse = &thread->fuse_corners[fnum];
+ ring_osc_mask &= (u16)(~BIT(fuse->ring_osc_idx));
+ if (fnum)
+ prev_fuse = &thread->fuse_corners[fnum - 1];
+ else
+ prev_fuse = NULL;
+
+ corner->fuse_corner = fuse;
+ corner->freq = cdata[i].freq;
+ corner->uV = fuse->uV;
+
+ if (prev_fuse) {
+ if (prev_fuse->ring_osc_idx == fuse->ring_osc_idx)
+ quot_offset = NULL;
+
+ scaling = cpr_calculate_scaling(drv->dev, quot_offset,
+ fdata, corner);
+ if (scaling < 0)
+ return scaling;
+
+ freq_diff_mhz = fuse->max_freq - corner->freq;
+ do_div(freq_diff_mhz, 1000000); /* now in MHz */
+
+ corner->quot_adjust = scaling * freq_diff_mhz;
+ do_div(corner->quot_adjust, 1000);
+
+ /* Fine-tune QUOT (closed-loop) based on fixed values */
+ sf_idx = tdesc->ro_scaling_factor_common ? 0 : fnum;
+ ro_fac = tdesc->ro_scaling_factor[sf_idx][fuse->ring_osc_idx];
+ vadj = cdata[i].cloop_vadj;
+ corner->quot_adjust -= cpr3_adjust_quot(ro_fac, vadj);
+ dev_vdbg(drv->dev, "Quot fine-tuning to %d for post-vadj=%d\n",
+ corner->quot_adjust, vadj);
+
+ /*
+ * Make sure that we scale (up) monotonically.
+ * P.S.: Fuse quots can never be descending.
+ */
+ prev_quot = prev_corner->fuse_corner->quot;
+ prev_quot -= prev_corner->quot_adjust;
+ if (fuse->quot - corner->quot_adjust < prev_quot) {
+ int new_adj = prev_corner->fuse_corner->quot;
+
+ new_adj -= fuse->quot;
+ dev_vdbg(drv->dev, "Monotonic increase forced: %d->%d\n",
+ corner->quot_adjust, new_adj);
+ corner->quot_adjust = new_adj;
+ }
+
+ corner->uV = cpr_interpolate(corner,
+ drv->vreg_step, fdata);
+ }
+ /* Negative fuse quotients are nonsense. */
+ if (fuse->quot < corner->quot_adjust)
+ return -EINVAL;
+
+ min_quotient = min(min_quotient,
+ (u32)(fuse->quot - corner->quot_adjust));
+
+ /* Fine-tune voltages (open-loop) based on fixed values */
+ corner->uV += cdata[i].oloop_vadj;
+ dev_dbg(drv->dev, "Voltage fine-tuning to %d for post-vadj=%d\n",
+ corner->uV, cdata[i].oloop_vadj);
+
+ corner->max_uV = fuse->max_uV;
+ corner->min_uV = fuse->min_uV;
+ corner->uV = clamp(corner->uV, corner->min_uV, corner->max_uV);
+ dev_vdbg(drv->dev, "Clamped after interpolation: [%d %d %d]\n",
+ corner->min_uV, corner->uV, corner->max_uV);
+
+ /* Make sure that we scale monotonically here, too. */
+ if (corner->uV < prev_corner->uV)
+ corner->uV = prev_corner->uV;
+
+ corner->last_uV = corner->uV;
+
+ /* Reduce the ceiling voltage if needed */
+ if (desc->reduce_to_corner_uV && corner->uV < corner->max_uV)
+ corner->max_uV = corner->uV;
+ else if (desc->reduce_to_fuse_uV && fuse->uV < corner->max_uV)
+ corner->max_uV = max(corner->min_uV, fuse->uV);
+
+ corner->min_uV = max(corner->max_uV - fdata->range_uV,
+ corner->min_uV);
+
+ /*
+ * Adjust per-corner floor and ceiling voltages so that
+ * they do not overlap the memory Array Power Mux (APM)
+ * nor the Memory Accelerator (MEM-ACC) threshold voltages.
+ */
+ if (desc->apm_threshold)
+ cpr3_restrict_corner(corner, desc->apm_threshold,
+ desc->apm_hysteresis,
+ drv->vreg_step);
+ if (desc->mem_acc_threshold)
+ cpr3_restrict_corner(corner, desc->mem_acc_threshold,
+ 0, drv->vreg_step);
+
+ prev_corner = corner;
+ dev_dbg(drv->dev, "corner %d: [%d %d %d] scaling %d quot %d\n", i,
+ corner->min_uV, corner->uV, corner->max_uV, scaling,
+ fuse->quot - corner->quot_adjust);
+ }
+
+ /* Additional setup for CPRh only */
+ if (desc->cpr_type < CTRL_TYPE_CPRH)
+ return 0;
+
+ /* If the OPPs can't be adjusted, programming the CPRh is useless */
+ ret = cprh_corner_adjust_opps(thread);
+ if (ret) {
+ dev_err(drv->dev, "Cannot adjust CPU OPP voltages: %d\n", ret);
+ return ret;
+ }
+
+ total_corners = thread->num_corners;
+ extra_corners = drv->extra_corners;
+
+ /* If the APM extra corner exists, add it now. */
+ if (desc->apm_crossover && desc->apm_threshold && extra_corners) {
+ /* Program the APM crossover corner on the CPR-Hardened */
+ thread->corners[total_corners].uV = desc->apm_crossover;
+ thread->corners[total_corners].min_uV = desc->apm_crossover;
+ thread->corners[total_corners].max_uV = desc->apm_crossover;
+ thread->corners[total_corners].is_open_loop = true;
+
+ /*
+ * We have calculated the APM parameters for this clock plan:
+ * make the APM *threshold* available to external callers.
+ * The crossover is used only internally in the CPR.
+ */
+ thread->ext_data.apm_threshold_uV = desc->apm_threshold;
+
+ dev_dbg(drv->dev, "corner %d (APM): [%d %d %d] Open-Loop\n",
+ total_corners, desc->apm_crossover,
+ desc->apm_crossover, desc->apm_crossover);
+
+ total_corners++;
+ extra_corners--;
+ }
+
+ if (desc->mem_acc_threshold && extra_corners) {
+ /* Program the Memory Accelerator threshold corner to CPRh */
+ thread->corners[total_corners].uV = desc->mem_acc_threshold;
+ thread->corners[total_corners].min_uV = desc->mem_acc_threshold;
+ thread->corners[total_corners].max_uV = desc->mem_acc_threshold;
+ thread->corners[total_corners].is_open_loop = true;
+
+ /*
+ * We have calculated a mem-acc threshold for this clock plan:
+ * make it available to external callers.
+ */
+ thread->ext_data.mem_acc_threshold_uV = desc->mem_acc_threshold;
+
+ dev_dbg(drv->dev, "corner %d (MEMACC): [%d %d %d] Open-Loop\n",
+ total_corners, desc->mem_acc_threshold,
+ desc->mem_acc_threshold, desc->mem_acc_threshold);
+
+ total_corners++;
+ extra_corners--;
+ }
+
+ /*
+ * If there are any extra corners left, it means that even though we
+ * expect to fill in both APM and MEM-ACC crossovers, one couldn't
+ * satisfy requirements, which means that the specified parameters
+ * are wrong: in this case, inform the user and bail out, otherwise
+ * if we go on writing the (invalid) table to the CPR-Hardened, the
+ * hardware (in this case, the CPU) will surely freeze and crash.
+ */
+ if (unlikely(extra_corners)) {
+ dev_err(drv->dev, "APM/MEM-ACC corners: bad parameters.\n");
+ return -EINVAL;
+ }
+ /* Reassign extra_corners, as we have to exclude delta_quot for them */
+ extra_corners = drv->extra_corners;
+
+ /* Disable the interface between OSM and CPRh */
+ cpr_masked_write(thread, drv->reg_ctl,
+ CPRH_CTL_OSM_ENABLED, 0);
+
+ /* Program the GCNT before unmasking ring oscillator(s) */
+ for (i = 0; i < CPR3_RO_COUNT; i++) {
+ if (!(ring_osc_mask & BIT(i))) {
+ cpr_write(thread, CPR3_REG_GCNT(i), drv->gcnt);
+ dev_vdbg(drv->dev, "RO%d gcnt=%d\n", i, drv->gcnt);
+ }
+ }
+
+ /*
+ * Unmask the ring oscillator(s) that we're going to use: it seems
+ * to be mandatory to do this *before* sending the rest of the
+ * CPRhardened specific configuration.
+ */
+ dev_dbg(drv->dev, "Unmasking ring oscillators with mask 0x%x\n", ring_osc_mask);
+ cpr_write(thread, CPR3_REG_RO_MASK(tdesc->hw_tid), ring_osc_mask);
+
+ /* Setup minimum quotients for ring oscillators */
+ for (i = 0; i < CPR3_RO_COUNT; i++) {
+ u32 tgt_quot_reg = CPR3_REG_TARGET_QUOT(tdesc->hw_tid, i);
+ u32 tgt_quot_val = 0;
+
+ if (!(ring_osc_mask & BIT(i)))
+ tgt_quot_val = min_quotient;
+
+ cpr_write(thread, tgt_quot_reg, tgt_quot_val);
+ dev_vdbg(drv->dev, "Programmed min quotient %u for Ring Oscillator %d\n",
+ tgt_quot_val, tgt_quot_reg);
+ }
+
+ for (i = 0; i < total_corners; i++) {
+ int volt_oloop_steps, volt_floor_steps, delta_quot_steps;
+ int ring_osc;
+ u32 val;
+
+ fnum = cdata[i].fuse_corner;
+ fuse = &thread->fuse_corners[fnum];
+
+ val = thread->corners[i].uV - desc->cpr_base_voltage;
+ volt_oloop_steps = DIV_ROUND_UP(val, drv->vreg_step);
+
+ val = thread->corners[i].min_uV - desc->cpr_base_voltage;
+ volt_floor_steps = DIV_ROUND_UP(val, drv->vreg_step);
+
+ /*
+ * If we are accessing corners that are not used as
+ * an active DCVS set-point, then always select RO 0
+ * and zero out the delta quotient.
+ */
+ if (i >= thread->num_corners) {
+ ring_osc = 0;
+ delta_quot_steps = 0;
+ } else {
+ ring_osc = fuse->ring_osc_idx;
+ val = fuse->quot - thread->corners[i].quot_adjust;
+ val -= min_quotient;
+ delta_quot_steps = DIV_ROUND_UP(val,
+ CPRH_DELTA_QUOT_STEP_FACTOR);
+ }
+
+ if (volt_oloop_steps > CPRH_CORNER_INIT_VOLTAGE_MAX_VALUE ||
+ volt_floor_steps > CPRH_CORNER_FLOOR_VOLTAGE_MAX_VALUE ||
+ delta_quot_steps > CPRH_CORNER_QUOT_DELTA_MAX_VALUE) {
+ dev_err(drv->dev, "Invalid cfg: oloop=%d, floor=%d, delta=%d\n",
+ volt_oloop_steps, volt_floor_steps,
+ delta_quot_steps);
+ return -EINVAL;
+ }
+ /* Green light: Go, Go, Go! */
+
+ /* Set number of open-loop steps */
+ val = FIELD_PREP(CPRH_CORNER_INIT_VOLTAGE_MASK, volt_oloop_steps);
+
+ /* Set number of floor voltage steps */
+ val |= FIELD_PREP(CPRH_CORNER_FLOOR_VOLTAGE_MASK, volt_floor_steps);
+
+ /* Set number of target quotient delta steps */
+ val |= FIELD_PREP(CPRH_CORNER_QUOT_DELTA_MASK, delta_quot_steps);
+
+ /* Select ring oscillator for this corner */
+ val |= FIELD_PREP(CPRH_CORNER_RO_SEL_MASK, ring_osc);
+
+ /* Open loop corner is usually APM/ACC crossover */
+ if (thread->corners[i].is_open_loop) {
+ dev_dbg(drv->dev, "Disabling Closed-Loop on corner %d\n", i);
+ val |= CPRH_CORNER_CPR_CL_DISABLE;
+ }
+ cpr_write(thread, CPRH_REG_CORNER(drv, tdesc->hw_tid, i), val);
+
+ dev_dbg(drv->dev, "steps [%d]: open-loop %d, floor %d, delta_quot %d\n",
+ i, volt_oloop_steps, volt_floor_steps,
+ delta_quot_steps);
+ }
+
+ /* YAY! Setup is done! Enable the internal loop to start CPR. */
+ cpr_masked_write(thread, CPR3_REG_CPR_CTL,
+ CPR3_CPR_CTL_LOOP_EN_MASK,
+ CPR3_CPR_CTL_LOOP_EN_MASK);
+
+ /*
+ * All the writes are going through before enabling internal
+ * communication between the OSM and the CPRh controllers
+ * because we are never using relaxed accessors, but should
+ * we use them, it would be critical to issue a barrier here,
+ * otherwise there is a high risk of hardware lockups due to
+ * under-voltage for the selected CPU clock.
+ *
+ * Please note that the CPR-hardened gets set-up in Linux but
+ * then gets actually used in firmware (and only by the OSM);
+ * after handing it off we will have no more control on it.
+ */
+
+ /* Enable the interface between OSM and CPRh */
+ cpr_masked_write(thread, drv->reg_ctl,
+ CPRH_CTL_OSM_ENABLED,
+ CPRH_CTL_OSM_ENABLED);
+
+ /* On success, free cdata manually */
+ devm_kfree(drv->dev, cdata);
+ return 0;
+}
+
+/**
+ * cpr3_init_parameters() - Initialize CPR global parameters
+ * @drv: Main driver structure
+ *
+ * Initial "integrity" checks and setup for the thread-independent parameters.
+ *
+ * Return: Zero for success, negative number on error
+ */
+static int cpr3_init_parameters(struct cpr_drv *drv)
+{
+ const struct cpr_desc *desc = drv->desc;
+ struct clk *clk;
+
+ clk = devm_clk_get(drv->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(drv->dev, "Couldn't get the reference clock: %ld\n", PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+
+ drv->ref_clk_khz = clk_get_rate(clk);
+ do_div(drv->ref_clk_khz, 1000);
+
+ /* On CPRh this clock is not always-on... */
+ if (desc->cpr_type == CTRL_TYPE_CPRH)
+ clk_prepare_enable(clk);
+ else
+ devm_clk_put(drv->dev, clk);
+
+ if (desc->timer_cons_up > CPR3_THRESH_CONS_UP_MASK ||
+ desc->timer_cons_down > CPR3_THRESH_CONS_DOWN_MASK ||
+ desc->up_threshold > CPR3_THRESH_UP_THRESH_MASK ||
+ desc->down_threshold > CPR3_THRESH_DOWN_THRESH_MASK ||
+ desc->idle_clocks > CPR3_CPR_CTL_IDLE_CLOCKS_MASK ||
+ desc->count_mode > CPR3_CPR_CTL_COUNT_MODE_MASK ||
+ desc->count_repeat > CPR3_CPR_CTL_COUNT_REPEAT_MASK)
+ return -EINVAL;
+
+ /*
+ * Read the CPR version register only from CPR3 onwards:
+ * this is needed to get the additional register offsets.
+ *
+ * Note: When threaded, even if multi-controller, there
+ * is no chance to have different versions at the
+ * same time in the same domain, so it is safe to
+ * check this only on the first controller/thread.
+ */
+ drv->cpr_hw_rev = cpr_read(&drv->threads[0],
+ CPR3_REG_CPR_VERSION);
+ dev_dbg(drv->dev, "CPR hardware revision: 0x%x\n", drv->cpr_hw_rev);
+
+ if (drv->cpr_hw_rev >= CPRH_CPR_VERSION_4P5) {
+ drv->reg_corner = 0x3500;
+ drv->reg_corner_tid = 0xa0;
+ drv->reg_ctl = 0x3a80;
+ drv->reg_status = 0x3a84;
+ } else {
+ drv->reg_corner = 0x3a00;
+ drv->reg_corner_tid = 0;
+ drv->reg_ctl = 0x3aa0;
+ drv->reg_status = 0x3aa4;
+ }
+
+ dev_dbg(drv->dev, "up threshold = %u, down threshold = %u\n",
+ desc->up_threshold, desc->down_threshold);
+
+ return 0;
+}
+
+/**
+ * cpr3_find_initial_corner() - Finds boot-up p-state and enables CPR
+ * @thread: Structure holding CPR thread-specific parameters
+ *
+ * Differently from CPRv1, from CPRv3 onwards when we successfully find
+ * the target boot-up performance state, we must refresh the HW
+ * immediately to guarantee system stability and to avoid overheating
+ * during the boot process, thing that would more likely happen without
+ * this driver doing its job.
+ *
+ * Return: Zero for success, negative number on error
+ */
+static int cpr3_find_initial_corner(struct cpr_thread *thread)
+{
+ struct cpr_drv *drv = thread->drv;
+ struct corner *corner;
+ int uV, idx;
+
+ idx = cpr_find_initial_corner(drv->dev, thread->cpu_clk,
+ thread->corners,
+ thread->num_corners);
+ if (idx < 0)
+ return idx;
+
+ cpr_ctl_disable(thread);
+
+ corner = &thread->corners[idx];
+ cpr_corner_restore(thread, corner);
+
+ uV = regulator_get_voltage(drv->vreg);
+ uV = clamp(uV, corner->min_uV, corner->max_uV);
+
+ corner->last_uV = uV;
+ if (!drv->last_uV)
+ drv->last_uV = uV;
+
+ cpr_commit_state(thread);
+ thread->enabled = true;
+ cpr_switch(drv);
+
+ return 0;
+}
+
+static const int msm8998_gold_scaling_factor[][CPR3_RO_COUNT] = {
+ /* Fuse Corner 0 */
+ {
+ 2857, 3057, 2828, 2952, 2699, 2798, 2446, 2631,
+ 2629, 2578, 2244, 3344, 3289, 3137, 3164, 2655
+ },
+ /* Fuse Corner 1 */
+ {
+ 2857, 3057, 2828, 2952, 2699, 2798, 2446, 2631,
+ 2629, 2578, 2244, 3344, 3289, 3137, 3164, 2655
+ },
+ /* Fuse Corner 2 */
+ {
+ 2603, 2755, 2676, 2777, 2573, 2685, 2465, 2610,
+ 2312, 2423, 2243, 3104, 3022, 3036, 2740, 2303
+ },
+ /* Fuse Corner 3 */
+ {
+ 1901, 2016, 2096, 2228, 2034, 2161, 2077, 2188,
+ 1565, 1870, 1925, 2235, 2205, 2413, 1762, 1478
+ }
+};
+
+static const int msm8998_silver_scaling_factor[][CPR3_RO_COUNT] = {
+ /* Fuse Corner 0 */
+ {
+ 2595, 2794, 2577, 2762, 2471, 2674, 2199, 2553,
+ 3189, 3255, 3192, 2962, 3054, 2982, 2042, 2945
+ },
+ /* Fuse Corner 1 */
+ {
+ 2595, 2794, 2577, 2762, 2471, 2674, 2199, 2553,
+ 3189, 3255, 3192, 2962, 3054, 2982, 2042, 2945
+ },
+ /* Fuse Corner 2 */
+ {
+ 2391, 2550, 2483, 2638, 2382, 2564, 2259, 2555,
+ 2766, 3041, 2988, 2935, 2873, 2688, 2013, 2784
+ },
+ /* Fuse Corner 3 */
+ {
+ 2066, 2153, 2300, 2434, 2220, 2386, 2288, 2465,
+ 2028, 2511, 2487, 2734, 2554, 2117, 1892, 2377
+ }
+};
+
+static const struct cpr_thread_desc msm8998_thread_gold = {
+ .controller_id = 1,
+ .hw_tid = 0,
+ .ro_scaling_factor = msm8998_gold_scaling_factor,
+ .sensor_range_start = 0,
+ .sensor_range_end = 9,
+ .init_voltage_step = 10000,
+ .init_voltage_width = 6,
+ .step_quot_init_min = 9,
+ .step_quot_init_max = 14,
+ .num_fuse_corners = 4,
+ .fuse_corner_data = (struct fuse_corner_data[]){
+ /* fuse corner 0 */
+ {
+ .ref_uV = 756000,
+ .max_uV = 828000,
+ .min_uV = 568000,
+ .range_uV = 32000,
+ .volt_cloop_adjust = 0,
+ .volt_oloop_adjust = 8000,
+ .max_volt_scale = 4,
+ .max_quot_scale = 10,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ /* fuse corner 1 */
+ {
+ .ref_uV = 756000,
+ .max_uV = 900000,
+ .min_uV = 624000,
+ .range_uV = 32000,
+ .volt_cloop_adjust = 0,
+ .volt_oloop_adjust = 0,
+ .max_volt_scale = 320,
+ .max_quot_scale = 350,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ /* fuse corner 2 */
+ {
+ .ref_uV = 828000,
+ .max_uV = 952000,
+ .min_uV = 632000,
+ .range_uV = 32000,
+ .volt_cloop_adjust = 12000,
+ .volt_oloop_adjust = 12000,
+ .max_volt_scale = 620,
+ .max_quot_scale = 750,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ /* fuse corner 3 */
+ {
+ .ref_uV = 1056000,
+ .max_uV = 1136000,
+ .min_uV = 772000,
+ .range_uV = 40000,
+ .volt_cloop_adjust = 50000,
+ .volt_oloop_adjust = 52000,
+ .max_volt_scale = 580,
+ .max_quot_scale = 1040,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ },
+};
+
+static const struct cpr_thread_desc msm8998_thread_silver = {
+ .controller_id = 0,
+ .hw_tid = 0,
+ .ro_scaling_factor = msm8998_silver_scaling_factor,
+ .sensor_range_start = 0,
+ .sensor_range_end = 6,
+ .init_voltage_step = 10000,
+ .init_voltage_width = 6,
+ .step_quot_init_min = 11,
+ .step_quot_init_max = 12,
+ .num_fuse_corners = 4,
+ .fuse_corner_data = (struct fuse_corner_data[]){
+ /* fuse corner 0 */
+ {
+ .ref_uV = 688000,
+ .max_uV = 828000,
+ .min_uV = 568000,
+ .range_uV = 32000,
+ .volt_cloop_adjust = 20000,
+ .volt_oloop_adjust = 40000,
+ .max_volt_scale = 4,
+ .max_quot_scale = 10,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ /* fuse corner 1 */
+ {
+ .ref_uV = 756000,
+ .max_uV = 900000,
+ .min_uV = 632000,
+ .range_uV = 32000,
+ .volt_cloop_adjust = 26000,
+ .volt_oloop_adjust = 24000,
+ .max_volt_scale = 500,
+ .max_quot_scale = 800,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ /* fuse corner 2 */
+ {
+ .ref_uV = 828000,
+ .max_uV = 952000,
+ .min_uV = 664000,
+ .range_uV = 32000,
+ .volt_cloop_adjust = 12000,
+ .volt_oloop_adjust = 12000,
+ .max_volt_scale = 280,
+ .max_quot_scale = 650,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+
+ },
+ /* fuse corner 3 */
+ {
+ .ref_uV = 1056000,
+ .max_uV = 1056000,
+ .min_uV = 772000,
+ .range_uV = 40000,
+ .volt_cloop_adjust = 30000,
+ .volt_oloop_adjust = 30000,
+ .max_volt_scale = 430,
+ .max_quot_scale = 800,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ },
+};
+
+static const struct cpr_desc msm8998_cpr_desc = {
+ .cpr_type = CTRL_TYPE_CPRH,
+ .num_threads = 2,
+ .mem_acc_threshold = 852000,
+ .apm_threshold = 800000,
+ .apm_crossover = 880000,
+ .apm_hysteresis = 0,
+ .cpr_base_voltage = 352000,
+ .cpr_max_voltage = 1200000,
+ .timer_delay_us = 5000,
+ .timer_cons_up = 0,
+ .timer_cons_down = 2,
+ .up_threshold = 2,
+ .down_threshold = 2,
+ .idle_clocks = 15,
+ .count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN,
+ .count_repeat = 14,
+ .gcnt_us = 1,
+ .vreg_step_fixed = 4000,
+ .vreg_step_up_limit = 1,
+ .vreg_step_down_limit = 1,
+ .vdd_settle_time_us = 34,
+ .corner_settle_time_us = 6,
+ .reduce_to_corner_uV = true,
+ .hw_closed_loop_en = true,
+ .threads = (const struct cpr_thread_desc *[]) {
+ &msm8998_thread_silver,
+ &msm8998_thread_gold,
+ },
+};
+
+static const struct cpr_acc_desc msm8998_cpr_acc_desc = {
+ .cpr_desc = &msm8998_cpr_desc,
+};
+
+static const int sdm630_gold_scaling_factor[][CPR3_RO_COUNT] = {
+ /* Same RO factors for all fuse corners */
+ {
+ 4040, 3230, 0, 2210, 2560, 2450, 2230, 2220,
+ 2410, 2300, 2560, 2470, 1600, 3120, 2620, 2280
+ }
+};
+
+static const int sdm630_silver_scaling_factor[][CPR3_RO_COUNT] = {
+ /* Same RO factors for all fuse corners */
+ {
+ 3600, 3600, 3830, 2430, 2520, 2700, 1790, 1760,
+ 1970, 1880, 2110, 2010, 2510, 4900, 4370, 4780,
+ }
+};
+
+static const struct cpr_thread_desc sdm630_thread_gold = {
+ .controller_id = 0,
+ .hw_tid = 0,
+ .ro_scaling_factor = sdm630_gold_scaling_factor,
+ .ro_scaling_factor_common = true,
+ .sensor_range_start = 0,
+ .sensor_range_end = 6,
+ .init_voltage_step = 10000,
+ .init_voltage_width = 6,
+ .step_quot_init_min = 12,
+ .step_quot_init_max = 14,
+ .num_fuse_corners = 5,
+ .fuse_corner_data = (struct fuse_corner_data[]){
+ /* fuse corner 0 */
+ {
+ .ref_uV = 644000,
+ .max_uV = 724000,
+ .min_uV = 588000,
+ .range_uV = 40000,
+ .volt_cloop_adjust = -30000,
+ .volt_oloop_adjust = 15000,
+ .max_volt_scale = 10,
+ .max_quot_scale = 300,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ /* fuse corner 1 */
+ {
+ .ref_uV = 788000,
+ .max_uV = 788000,
+ .min_uV = 652000,
+ .range_uV = 40000,
+ .volt_cloop_adjust = -30000,
+ .volt_oloop_adjust = 5000,
+ .max_volt_scale = 320,
+ .max_quot_scale = 275,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ /* fuse corner 2 */
+ {
+ .ref_uV = 868000,
+ .max_uV = 868000,
+ .min_uV = 712000,
+ .range_uV = 40000,
+ .volt_cloop_adjust = -30000,
+ .volt_oloop_adjust = 5000,
+ .max_volt_scale = 350,
+ .max_quot_scale = 800,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ /* fuse corner 3 */
+ {
+ .ref_uV = 988000,
+ .max_uV = 988000,
+ .min_uV = 784000,
+ .range_uV = 66000,
+ .volt_cloop_adjust = -30000,
+ .volt_oloop_adjust = 0,
+ .max_volt_scale = 868,
+ .max_quot_scale = 980,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ /* fuse corner 4 */
+ {
+ .ref_uV = 1068000,
+ .max_uV = 1068000,
+ .min_uV = 844000,
+ .range_uV = 40000,
+ .volt_cloop_adjust = -30000,
+ .volt_oloop_adjust = 0,
+ .max_volt_scale = 868,
+ .max_quot_scale = 980,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ },
+};
+
+static const struct cpr_thread_desc sdm630_thread_silver = {
+ .controller_id = 1,
+ .hw_tid = 0,
+ .ro_scaling_factor = sdm630_silver_scaling_factor,
+ .ro_scaling_factor_common = true,
+ .sensor_range_start = 0,
+ .sensor_range_end = 6,
+ .init_voltage_step = 10000,
+ .init_voltage_width = 6,
+ .step_quot_init_min = 12,
+ .step_quot_init_max = 14,
+ .num_fuse_corners = 3,
+ .fuse_corner_data = (struct fuse_corner_data[]){
+ /* fuse corner 0 */
+ {
+ .ref_uV = 644000,
+ .max_uV = 724000,
+ .min_uV = 588000,
+ .range_uV = 32000,
+ .volt_cloop_adjust = -30000,
+ .volt_oloop_adjust = 0,
+ .max_volt_scale = 10,
+ .max_quot_scale = 360,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ /* fuse corner 1 */
+ {
+ .ref_uV = 788000,
+ .max_uV = 788000,
+ .min_uV = 652000,
+ .range_uV = 40000,
+ .volt_cloop_adjust = -30000,
+ .volt_oloop_adjust = 0,
+ .max_volt_scale = 500,
+ .max_quot_scale = 550,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ /* fuse corner 2 */
+ {
+ .ref_uV = 1068000,
+ .max_uV = 1068000,
+ .min_uV = 800000,
+ .range_uV = 40000,
+ .volt_cloop_adjust = -30000,
+ .volt_oloop_adjust = 0,
+ .max_volt_scale = 2370,
+ .max_quot_scale = 550,
+ .quot_offset = 0,
+ .quot_scale = 1,
+ .quot_adjust = 0,
+ .quot_offset_scale = 5,
+ .quot_offset_adjust = 0,
+ },
+ },
+};
+
+static const struct cpr_desc sdm630_cpr_desc = {
+ .cpr_type = CTRL_TYPE_CPRH,
+ .num_threads = 2,
+ .apm_threshold = 872000,
+ .apm_crossover = 872000,
+ .apm_hysteresis = 20000,
+ .cpr_base_voltage = 400000,
+ .cpr_max_voltage = 1300000,
+ .timer_delay_us = 5000,
+ .timer_cons_up = 0,
+ .timer_cons_down = 2,
+ .up_threshold = 2,
+ .down_threshold = 2,
+ .idle_clocks = 15,
+ .count_mode = CPR3_CPR_CTL_COUNT_MODE_ALL_AT_ONCE_MIN,
+ .count_repeat = 14,
+ .gcnt_us = 1,
+ .vreg_step_fixed = 4000,
+ .vreg_step_up_limit = 1,
+ .vreg_step_down_limit = 1,
+ .vdd_settle_time_us = 34,
+ .corner_settle_time_us = 5,
+ .reduce_to_corner_uV = true,
+ .hw_closed_loop_en = true,
+ .threads = (const struct cpr_thread_desc *[]) {
+ &sdm630_thread_gold,
+ &sdm630_thread_silver,
+ },
+};
+
+static const struct cpr_acc_desc sdm630_cpr_acc_desc = {
+ .cpr_desc = &sdm630_cpr_desc,
+};
+
+static unsigned int cpr_get_performance_state(struct generic_pm_domain *genpd,
+ struct dev_pm_opp *opp)
+{
+ return dev_pm_opp_get_level(opp);
+}
+
+static int cpr_power_off(struct generic_pm_domain *domain)
+{
+ struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd);
+
+ return cpr_disable(thread);
+}
+
+static int cpr_power_on(struct generic_pm_domain *domain)
+{
+ struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd);
+
+ return cpr_enable(thread);
+}
+
+static void cpr_pd_detach_dev(struct generic_pm_domain *domain,
+ struct device *dev)
+{
+ struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd);
+ struct cpr_drv *drv = thread->drv;
+
+ mutex_lock(&drv->lock);
+
+ dev_dbg(drv->dev, "detach callback for: %s\n", dev_name(dev));
+ thread->attached_cpu_dev = NULL;
+
+ mutex_unlock(&drv->lock);
+}
+
+static int cpr_pd_attach_dev(struct generic_pm_domain *domain,
+ struct device *dev)
+{
+ struct cpr_thread *thread = container_of(domain, struct cpr_thread, pd);
+ struct cpr_drv *drv = thread->drv;
+ const struct acc_desc *acc_desc = drv->acc_desc;
+ bool cprh_opp_remove_table = false;
+ int ret = 0;
+
+ mutex_lock(&drv->lock);
+
+ dev_dbg(drv->dev, "attach callback for: %s\n", dev_name(dev));
+
+ /*
+ * This driver only supports scaling voltage for a CPU cluster
+ * where all CPUs in the cluster share a single regulator.
+ * Therefore, save the struct device pointer only for the first
+ * CPU device that gets attached. There is no need to do any
+ * additional initialization when further CPUs get attached.
+ * This is not an error condition.
+ */
+ if (thread->attached_cpu_dev)
+ goto unlock;
+
+ /*
+ * cpr_scale_voltage() requires the direction (if we are changing
+ * to a higher or lower OPP). The first time
+ * cpr_set_performance_state() is called, there is no previous
+ * performance state defined. Therefore, we call
+ * cpr_find_initial_corner() that gets the CPU clock frequency
+ * set by the bootloader, so that we can determine the direction
+ * the first time cpr_set_performance_state() is called.
+ */
+ thread->cpu_clk = devm_clk_get(dev, NULL);
+ if (drv->desc->cpr_type < CTRL_TYPE_CPRH && IS_ERR(thread->cpu_clk)) {
+ ret = PTR_ERR(thread->cpu_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(drv->dev, "could not get cpu clk: %d\n", ret);
+ goto unlock;
+ }
+ thread->attached_cpu_dev = dev;
+
+ /*
+ * We are exporting the APM and MEM-ACC thresholds to the caller;
+ * while APM is necessary in the CPU CPR case, MEM-ACC may not be,
+ * depending on the SoC and on fuses.
+ * Initialize both to an invalid value, so that the caller can check
+ * if they got calculated or read from fuses in this driver.
+ */
+ thread->ext_data.apm_threshold_uV = -1;
+ thread->ext_data.mem_acc_threshold_uV = -1;
+ dev_set_drvdata(thread->attached_cpu_dev, &thread->ext_data);
+
+ dev_dbg(drv->dev, "using cpu clk from: %s\n",
+ dev_name(thread->attached_cpu_dev));
+
+ /*
+ * Everything related to (virtual) corners has to be initialized
+ * here, when attaching to the power domain, since we need to know
+ * the maximum frequency for each fuse corner, and this is only
+ * available after the cpufreq driver has attached to us.
+ * The reason for this is that we need to know the highest
+ * frequency associated with each fuse corner.
+ */
+ ret = dev_pm_opp_get_opp_count(&thread->pd.dev);
+ if (ret < 0) {
+ dev_err(drv->dev, "could not get OPP count\n");
+ thread->attached_cpu_dev = NULL;
+ goto unlock;
+ }
+ thread->num_corners = ret;
+
+ thread->corners = devm_kcalloc(drv->dev,
+ thread->num_corners +
+ drv->extra_corners,
+ sizeof(*thread->corners),
+ GFP_KERNEL);
+ if (!thread->corners) {
+ ret = -ENOMEM;
+ goto unlock;
+ }
+
+ /*
+ * If we are on CPR-Hardened we have to make sure that the attached
+ * device has a OPP table installed, as we're going to modify it here
+ * with our calculations based on qfprom values.
+ */
+ if (drv->desc->cpr_type == CTRL_TYPE_CPRH) {
+ ret = dev_pm_opp_of_add_table(dev);
+ if (ret && ret != -EEXIST) {
+ dev_err(drv->dev, "Cannot add table: %d\n", ret);
+ goto unlock;
+ }
+ cprh_opp_remove_table = true;
+ }
+
+ ret = cpr3_corner_init(thread);
+ if (ret)
+ goto exit;
+
+ if (drv->desc->cpr_type < CTRL_TYPE_CPRH) {
+ ret = cpr3_find_initial_corner(thread);
+ if (ret)
+ goto exit;
+
+ if (acc_desc->config)
+ regmap_multi_reg_write(drv->tcsr, acc_desc->config,
+ acc_desc->num_regs_per_fuse);
+
+ /* Enable ACC if required */
+ if (acc_desc->enable_mask)
+ regmap_update_bits(drv->tcsr, acc_desc->enable_reg,
+ acc_desc->enable_mask,
+ acc_desc->enable_mask);
+ }
+ dev_info(drv->dev, "thread %d initialized with %u OPPs\n",
+ thread->id, thread->num_corners);
+exit:
+ /*
+ * If we are on CPRh and we reached an error condition, we installed
+ * the OPP table but we haven't done any setup on it, nor we ever will.
+ * In order to leave a clean state, remove the table.
+ */
+ if (ret && cprh_opp_remove_table)
+ dev_pm_opp_of_remove_table(thread->attached_cpu_dev);
+unlock:
+ mutex_unlock(&drv->lock);
+
+ return ret;
+}
+
+static int cpr3_debug_info_show(struct seq_file *s, void *unused)
+{
+ struct cpr_thread *thread = s->private;
+ struct fuse_corner *fuse = thread->fuse_corners;
+ struct corner *corner = thread->corners;
+ u32 tid = thread->desc->hw_tid;
+ u32 ctl, irq_status, reg;
+ unsigned int i;
+
+ if (thread->drv->desc->cpr_type < CTRL_TYPE_CPRH) {
+ seq_printf(s, "current_volt = %d uV\n", thread->drv->last_uV);
+ seq_printf(s, "requested voltage: %d uV\n", thread->corner->last_uV);
+ }
+
+ irq_status = cpr_read(thread, CPR3_REG_IRQ_STATUS);
+ seq_printf(s, "irq_status = 0x%x\n", irq_status);
+
+ ctl = cpr_read(thread, CPR3_REG_CPR_CTL);
+ seq_printf(s, "cpr_ctl = 0x%x\n", ctl);
+
+ seq_printf(s, "thread %d - hw tid: %u - enabled: %d:\n",
+ thread->id, thread->desc->hw_tid, thread->enabled);
+ seq_printf(s, "%d corners, derived from %d fuse corners\n",
+ thread->num_corners, thread->desc->num_fuse_corners);
+
+
+ /* The corners have not been initialized yet. */
+ if (!thread->num_corners)
+ return 0;
+
+ for (i = 0; i < thread->num_corners; i++, corner++)
+ seq_printf(s, "corner %d - uV=[%d %d %d] quot=%d freq=%llu\n",
+ i, corner->min_uV, corner->uV, corner->max_uV,
+ corner->quot_adjust, corner->freq);
+
+ for (i = 0; i < thread->desc->num_fuse_corners; i++, fuse++)
+ seq_printf(s, "fuse %d - uV=[%d %d %d] quot=%d freq=%llu\n",
+ i, fuse->min_uV, fuse->uV, fuse->max_uV,
+ fuse->quot, corner->freq);
+
+ reg = cpr_read(thread, CPR3_REG_RESULT0(tid));
+ seq_printf(s, "cpr_result_0 = 0x%x\n [", reg);
+ seq_printf(s, "busy = %lu, ", FIELD_GET(CPR3_RESULT0_BUSY_MASK, reg));
+ seq_printf(s, "step_dn = %lu, ", FIELD_GET(CPR3_RESULT0_STEP_DN_MASK, reg));
+ seq_printf(s, "step_up = %lu, ", FIELD_GET(CPR3_RESULT0_STEP_UP_MASK, reg));
+ seq_printf(s, "error_steps = %lu, ", FIELD_GET(CPR3_RESULT0_ERROR_STEPS_MASK, reg));
+ seq_printf(s, "error = %lu, ", FIELD_GET(CPR3_RESULT0_ERROR_MASK, reg));
+ seq_printf(s, "negative = %lu", FIELD_GET(CPR3_RESULT0_NEG_MASK, reg));
+ seq_puts(s, "]\n");
+
+ reg = cpr_read(thread, CPR3_REG_RESULT1(tid));
+ seq_printf(s, "cpr_result_1 = 0x%x\n [", reg);
+ seq_printf(s, "quot_min = %lu, ", FIELD_GET(CPR3_RESULT1_QUOT_MIN_MASK, reg));
+ seq_printf(s, "quot_max = %lu, ", FIELD_GET(CPR3_RESULT1_QUOT_MAX_MASK, reg));
+ seq_printf(s, "ro_min = %lu, ", FIELD_GET(CPR3_RESULT1_RO_MIN_MASK, reg));
+ seq_printf(s, "ro_max = %lu", FIELD_GET(CPR3_RESULT1_RO_MAX_MASK, reg));
+ seq_puts(s, "]\n");
+
+ reg = cpr_read(thread, CPR3_REG_RESULT2(tid));
+ seq_printf(s, "cpr_result_2 = 0x%x\n [", reg);
+ seq_printf(s, "qout_step_min = %lu, ", FIELD_GET(CPR3_RESULT2_STEP_QUOT_MIN_MASK, reg));
+ seq_printf(s, "qout_step_max = %lu, ", FIELD_GET(CPR3_RESULT2_STEP_QUOT_MAX_MASK, reg));
+ seq_printf(s, "sensor_min = %lu, ", FIELD_GET(CPR3_RESULT2_SENSOR_MIN_MASK, reg));
+ seq_printf(s, "sensor_max = %lu", FIELD_GET(CPR3_RESULT2_SENSOR_MAX_MASK, reg));
+ seq_puts(s, "]\n");
+
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(cpr3_debug_info);
+
+static void cpr3_debugfs_init(struct cpr_drv *drv)
+{
+ int i;
+
+ drv->debugfs = debugfs_create_dir("qcom_cpr3", NULL);
+
+ for (i = 0; i < drv->desc->num_threads; i++) {
+ char buf[50];
+
+ snprintf(buf, sizeof(buf), "thread%d", i);
+
+ debugfs_create_file(buf, 0444, drv->debugfs, &drv->threads[i],
+ &cpr3_debug_info_fops);
+ }
+}
+
+/**
+ * cpr_thread_init() - Initialize CPR thread related parameters
+ * @drv: Main driver structure
+ * @tid: Thread ID
+ *
+ * Return: Zero for success, negative number on error
+ */
+static int cpr_thread_init(struct cpr_drv *drv, int tid)
+{
+ const struct cpr_desc *desc = drv->desc;
+ const struct cpr_thread_desc *tdesc = desc->threads[tid];
+ struct cpr_thread *thread = &drv->threads[tid];
+ bool pd_registered = false;
+ int ret, i;
+
+ if (tdesc->step_quot_init_min > CPR3_CPR_STEP_QUOT_MIN_MASK ||
+ tdesc->step_quot_init_max > CPR3_CPR_STEP_QUOT_MAX_MASK)
+ return -EINVAL;
+
+ thread->id = tid;
+ thread->drv = drv;
+ thread->desc = tdesc;
+ thread->fuse_corners = devm_kcalloc(drv->dev,
+ tdesc->num_fuse_corners +
+ drv->extra_corners,
+ sizeof(*thread->fuse_corners),
+ GFP_KERNEL);
+ if (!thread->fuse_corners)
+ return -ENOMEM;
+
+ thread->cpr_fuses = cpr_get_fuses(drv->dev, tid,
+ tdesc->num_fuse_corners);
+ if (IS_ERR(thread->cpr_fuses))
+ return PTR_ERR(thread->cpr_fuses);
+
+ ret = cpr_populate_ring_osc_idx(thread->drv->dev, thread->fuse_corners,
+ thread->cpr_fuses,
+ tdesc->num_fuse_corners);
+ if (ret)
+ return ret;
+
+ ret = cpr_fuse_corner_init(thread);
+ if (ret)
+ return ret;
+
+ thread->pd.name = devm_kasprintf(drv->dev, GFP_KERNEL,
+ "%s_thread%d",
+ drv->dev->of_node->full_name,
+ thread->id);
+ if (!thread->pd.name)
+ return -EINVAL;
+
+ thread->pd.power_off = cpr_power_off;
+ thread->pd.power_on = cpr_power_on;
+ thread->pd.opp_to_performance_state = cpr_get_performance_state;
+ thread->pd.attach_dev = cpr_pd_attach_dev;
+ thread->pd.detach_dev = cpr_pd_detach_dev;
+
+ /* CPR-Hardened performance states are managed in firmware */
+ if (desc->cpr_type == CTRL_TYPE_CPRH)
+ thread->pd.set_performance_state = cprh_dummy_set_performance_state;
+ else
+ thread->pd.set_performance_state = cpr_set_performance_state;
+
+ /* Anything later than CPR1 must be always-on for now */
+ thread->pd.flags = GENPD_FLAG_ALWAYS_ON;
+
+ drv->cell_data.domains[tid] = &thread->pd;
+
+ ret = pm_genpd_init(&thread->pd, NULL, false);
+ if (ret < 0)
+ goto fail;
+ else
+ pd_registered = true;
+
+ /* On CPRhardened, the interrupts are managed in firmware */
+ if (desc->cpr_type < CTRL_TYPE_CPRH) {
+ INIT_WORK(&thread->restart_work, cpr_restart_worker);
+
+ ret = devm_request_threaded_irq(drv->dev, drv->irq,
+ NULL, cpr_irq_handler,
+ IRQF_ONESHOT |
+ IRQF_TRIGGER_RISING,
+ "cpr", drv);
+ if (ret)
+ goto fail;
+ }
+
+ return 0;
+
+fail:
+ /* Unregister all previously registered genpds */
+ for (i = tid - pd_registered; i >= 0; i--)
+ pm_genpd_remove(&drv->threads[i].pd);
+
+ return ret;
+}
+
+/**
+ * cpr3_resources_init() - Initialize resources used by this driver
+ * @pdev: Platform device
+ * @drv: Main driver structure
+ *
+ * Return: Zero for success, negative number on error
+ */
+static int cpr3_resources_init(struct platform_device *pdev,
+ struct cpr_drv *drv)
+{
+ const struct cpr_desc *desc = drv->desc;
+ struct cpr_thread *threads = drv->threads;
+ unsigned int i;
+ u8 cid_mask = 0;
+
+ /*
+ * Here, we are accounting for the following usecases:
+ * - One controller
+ * - One or multiple threads on the same iospace
+ *
+ * - Multiple controllers
+ * - Each controller has its own iospace and each
+ * may have one or multiple threads in their
+ * parent controller's iospace
+ *
+ * Then, to avoid complicating the code for no reason,
+ * this also needs a mandatory order in the list of
+ * threads which implies that all of them from the same
+ * controllers are specified sequentially. As an example:
+ *
+ * C0-T0, C0-T1...C0-Tn, C1-T0, C1-T1...C1-Tn
+ */
+ for (i = 0; i < desc->num_threads; i++) {
+ u8 cid = desc->threads[i]->controller_id;
+
+ if (cid_mask & BIT(cid)) {
+ if (desc->threads[i - 1]->controller_id != cid) {
+ dev_err(drv->dev, "Bad threads order. Please fix!\n");
+ return -EINVAL;
+ }
+ threads[i].base = threads[i - 1].base;
+ continue;
+ }
+ threads[i].base = devm_platform_ioremap_resource(pdev, cid);
+ if (IS_ERR(threads[i].base))
+ return PTR_ERR(threads[i].base);
+ cid_mask |= BIT(cid);
+ }
+ return 0;
+}
+
+static int cpr_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct cpr_drv *drv;
+ const struct cpr_desc *desc;
+ const struct cpr_acc_desc *data;
+ struct device_node *np;
+ unsigned int i;
+ int ret;
+
+ data = of_device_get_match_data(dev);
+ if (!data || !data->cpr_desc)
+ return -EINVAL;
+
+ desc = data->cpr_desc;
+
+ /* CPRh disallows MEM-ACC access from the HLOS */
+ if (!data->acc_desc && desc->cpr_type < CTRL_TYPE_CPRH)
+ return -EINVAL;
+
+ drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
+ if (!drv)
+ return -ENOMEM;
+
+ drv->dev = dev;
+ drv->desc = desc;
+ drv->threads = devm_kcalloc(dev, desc->num_threads,
+ sizeof(*drv->threads), GFP_KERNEL);
+ if (!drv->threads)
+ return -ENOMEM;
+
+ drv->cell_data.num_domains = desc->num_threads;
+ drv->cell_data.domains = devm_kcalloc(drv->dev,
+ drv->cell_data.num_domains,
+ sizeof(*drv->cell_data.domains),
+ GFP_KERNEL);
+ if (!drv->cell_data.domains)
+ return -ENOMEM;
+
+ if (data->acc_desc)
+ drv->acc_desc = data->acc_desc;
+
+ mutex_init(&drv->lock);
+
+ if (desc->cpr_type < CTRL_TYPE_CPRH) {
+ np = of_parse_phandle(dev->of_node, "qcom,acc", 0);
+ if (!np)
+ return -ENODEV;
+
+ drv->tcsr = syscon_node_to_regmap(np);
+ of_node_put(np);
+ if (IS_ERR(drv->tcsr))
+ return PTR_ERR(drv->tcsr);
+ }
+
+ ret = cpr3_resources_init(pdev, drv);
+ if (ret)
+ return ret;
+
+ drv->irq = platform_get_irq_optional(pdev, 0);
+ if (desc->cpr_type != CTRL_TYPE_CPRH && drv->irq < 0)
+ return -EINVAL;
+
+ /* On CPRhardened, vreg access it not allowed */
+ drv->vreg = devm_regulator_get_optional(dev, "vdd");
+ if (desc->cpr_type != CTRL_TYPE_CPRH && IS_ERR(drv->vreg))
+ return PTR_ERR(drv->vreg);
+
+ /*
+ * On at least CPRhardened, vreg is unaccessible and there is no
+ * way to read linear step from that regulator, hence it is hardcoded
+ * in the driver;
+ * When the vreg_step is not declared in the cpr data (or is zero),
+ * then having access to the vreg regulator is mandatory, as this
+ * will be retrieved through the regulator API.
+ */
+ if (desc->vreg_step_fixed)
+ drv->vreg_step = desc->vreg_step_fixed;
+ else
+ drv->vreg_step = regulator_get_linear_step(drv->vreg);
+
+ if (!drv->vreg_step)
+ return -EINVAL;
+
+ /*
+ * Initialize fuse corners, since it simply depends
+ * on data in efuses.
+ * Everything related to (virtual) corners has to be
+ * initialized after attaching to the power domain,
+ * since it depends on the CPU's OPP table.
+ */
+ ret = nvmem_cell_read_variable_le_u32(dev, "cpr_fuse_revision", &drv->fusing_rev);
+ if (ret)
+ return ret;
+
+ ret = nvmem_cell_read_variable_le_u32(dev, "cpr_speed_bin", &drv->speed_bin);
+ if (ret)
+ return ret;
+
+ /*
+ * Some SoCs require extra corners for MEM-ACC or APM: if
+ * the related parameters have been specified, then reserve
+ * a corner for the APM and/or MEM-ACC crossover, used by
+ * OSM and CPRh HW to set the supply voltage during the APM
+ * and/or MEM-ACC switch routine.
+ */
+ if (desc->cpr_type == CTRL_TYPE_CPRH) {
+ if (desc->apm_crossover && desc->apm_hysteresis >= 0)
+ drv->extra_corners++;
+
+ if (desc->mem_acc_threshold)
+ drv->extra_corners++;
+ }
+
+ /* Initialize all threads */
+ for (i = 0; i < desc->num_threads; i++) {
+ ret = cpr_thread_init(drv, i);
+ if (ret)
+ return ret;
+ }
+
+ /* Initialize global parameters */
+ ret = cpr3_init_parameters(drv);
+ if (ret)
+ goto unreg_genpd;
+
+ /* Write initial configuration on all threads */
+ for (i = 0; i < desc->num_threads; i++) {
+ ret = cpr_configure(&drv->threads[i]);
+ if (ret)
+ goto unreg_genpd;
+ }
+
+ ret = of_genpd_add_provider_onecell(dev->of_node, &drv->cell_data);
+ if (ret)
+ goto unreg_genpd;
+
+ platform_set_drvdata(pdev, drv);
+ cpr3_debugfs_init(drv);
+
+ return 0;
+
+unreg_genpd:
+ /* Clean up genpds */
+ for (i = desc->num_threads - 1; i >= 0; i--)
+ pm_genpd_remove(&drv->threads[i].pd);
+
+ return ret;
+}
+
+static int cpr_remove(struct platform_device *pdev)
+{
+ struct cpr_drv *drv = platform_get_drvdata(pdev);
+ int i;
+
+ of_genpd_del_provider(pdev->dev.of_node);
+
+ for (i = 0; i < drv->desc->num_threads; i++) {
+ cpr_ctl_disable(&drv->threads[i]);
+ cpr_irq_set(&drv->threads[i], 0);
+ pm_genpd_remove(&drv->threads[i].pd);
+ }
+
+ debugfs_remove_recursive(drv->debugfs);
+
+ return 0;
+}
+
+static const struct of_device_id cpr3_match_table[] = {
+ { .compatible = "qcom,msm8998-cprh", .data = &msm8998_cpr_acc_desc },
+ { .compatible = "qcom,sdm630-cprh", .data = &sdm630_cpr_acc_desc },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cpr3_match_table);
+
+static struct platform_driver cpr3_driver = {
+ .probe = cpr_probe,
+ .remove = cpr_remove,
+ .driver = {
+ .name = "qcom-cpr3",
+ .of_match_table = cpr3_match_table,
+ },
+};
+module_platform_driver(cpr3_driver)
+
+MODULE_DESCRIPTION("Core Power Reduction (CPR) v3/v4 driver");
+MODULE_LICENSE("GPL");
diff --git a/include/soc/qcom/cpr.h b/include/soc/qcom/cpr.h
new file mode 100644
index 000000000000..2ba4324d18f6
--- /dev/null
+++ b/include/soc/qcom/cpr.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2013-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019 Linaro Limited
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ * <[email protected]>
+ */
+
+#ifndef __CPR_H__
+#define __CPR_H__
+
+struct cpr_ext_data {
+ int mem_acc_threshold_uV;
+ int apm_threshold_uV;
+};
+
+#endif /* __CPR_H__ */
--
2.41.0
From: AngeloGioacchino Del Regno <[email protected]>
Add the MSM8998 to the blacklist since the CPU scaling is handled
out of this.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index e2b20080de3a..adb3579a1fee 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -143,6 +143,7 @@ static const struct of_device_id blocklist[] __initconst = {
{ .compatible = "qcom,apq8096", },
{ .compatible = "qcom,msm8996", },
+ { .compatible = "qcom,msm8998", },
{ .compatible = "qcom,qcs404", },
{ .compatible = "qcom,sa8155p" },
{ .compatible = "qcom,sa8540p" },
--
2.41.0
From: AngeloGioacchino Del Regno <[email protected]>
Add support for parsing per-CPR-thread data in preparation for introducing
CPR3+ support.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
[Konrad: separate this patch out of a bigger one]
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/soc/qcom/cpr-common.c | 42 +++++++++++++++++++++++++-----------------
drivers/soc/qcom/cpr-common.h | 8 ++++++--
drivers/soc/qcom/cpr.c | 4 ++--
3 files changed, 33 insertions(+), 21 deletions(-)
diff --git a/drivers/soc/qcom/cpr-common.c b/drivers/soc/qcom/cpr-common.c
index 3e3a4a61cfde..9001dccd4d95 100644
--- a/drivers/soc/qcom/cpr-common.c
+++ b/drivers/soc/qcom/cpr-common.c
@@ -73,35 +73,42 @@ static int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV,
return DIV_ROUND_UP(uV, step_volt) * step_volt;
}
-const struct cpr_fuse *cpr_get_fuses(struct device *dev,
+const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid,
unsigned int num_fuse_corners)
{
struct cpr_fuse *fuses;
- int i;
+ char cpr_name[11]; /* length of "cpr" + length of UINT_MAX (7) + \0 */
+ unsigned int i;
fuses = devm_kcalloc(dev, num_fuse_corners, sizeof(*fuses), GFP_KERNEL);
if (!fuses)
return ERR_PTR(-ENOMEM);
+ /* Support legacy bindings */
+ if (tid == UINT_MAX)
+ snprintf(cpr_name, sizeof(cpr_name), "cpr");
+ else
+ snprintf(cpr_name, sizeof(cpr_name), "cpr%d", tid);
+
for (i = 0; i < num_fuse_corners; i++) {
- char tbuf[32];
+ char tbuf[50];
- snprintf(tbuf, 32, "cpr_ring_osc%d", i + 1);
+ snprintf(tbuf, sizeof(tbuf), "%s_ring_osc%d", cpr_name, i + 1);
fuses[i].ring_osc = devm_kstrdup(dev, tbuf, GFP_KERNEL);
if (!fuses[i].ring_osc)
return ERR_PTR(-ENOMEM);
- snprintf(tbuf, 32, "cpr_init_voltage%d", i + 1);
+ snprintf(tbuf, sizeof(tbuf), "%s_init_voltage%d", cpr_name, i + 1);
fuses[i].init_voltage = devm_kstrdup(dev, tbuf, GFP_KERNEL);
if (!fuses[i].init_voltage)
return ERR_PTR(-ENOMEM);
- snprintf(tbuf, 32, "cpr_quotient%d", i + 1);
+ snprintf(tbuf, sizeof(tbuf), "%s_quotient%d", cpr_name, i + 1);
fuses[i].quotient = devm_kstrdup(dev, tbuf, GFP_KERNEL);
if (!fuses[i].quotient)
return ERR_PTR(-ENOMEM);
- snprintf(tbuf, 32, "cpr_quotient_offset%d", i + 1);
+ snprintf(tbuf, sizeof(tbuf), "%s_quotient_offset%d", cpr_name, i + 1);
fuses[i].quotient_offset = devm_kstrdup(dev, tbuf, GFP_KERNEL);
if (!fuses[i].quotient_offset)
return ERR_PTR(-ENOMEM);
@@ -202,15 +209,15 @@ int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk,
}
EXPORT_SYMBOL_GPL(cpr_find_initial_corner);
-unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp)
+unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid)
{
struct device_node *np;
unsigned int fuse_corner = 0;
np = dev_pm_opp_get_of_node(opp);
- if (of_property_read_u32(np, "qcom,opp-fuse-level", &fuse_corner))
- pr_err("%s: missing 'qcom,opp-fuse-level' property\n",
- __func__);
+ if (of_property_read_u32_index(np, "qcom,opp-fuse-level", tid, &fuse_corner))
+ pr_err("%s: missing 'qcom,opp-fuse-level[%u]' property\n",
+ __func__, tid);
of_node_put(np);
@@ -235,15 +242,16 @@ u64 cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
if (!ref_np)
goto out_ref;
- do {
- of_node_put(child_req_np);
- child_np = of_get_next_available_child(desc_np, child_np);
+ for_each_available_child_of_node(desc_np, child_np) {
child_req_np = of_parse_phandle(child_np, "required-opps", 0);
- } while (child_np && child_req_np != ref_np);
- if (child_np && child_req_np == ref_np)
- of_property_read_u64(child_np, "opp-hz", &rate);
+ if (child_np && child_req_np == ref_np) {
+ of_property_read_u64(child_np, "opp-hz", &rate);
+ goto out;
+ }
+ }
+out:
of_node_put(child_req_np);
of_node_put(child_np);
of_node_put(ref_np);
diff --git a/drivers/soc/qcom/cpr-common.h b/drivers/soc/qcom/cpr-common.h
index 1b2fa344eb09..2c5bb81ab713 100644
--- a/drivers/soc/qcom/cpr-common.h
+++ b/drivers/soc/qcom/cpr-common.h
@@ -22,6 +22,9 @@ struct fuse_corner_data {
int ref_uV;
int max_uV;
int min_uV;
+ int range_uV;
+ /* fuse volt: closed/open loop */
+ int volt_cloop_adjust;
int volt_oloop_adjust;
int max_volt_scale;
int max_quot_scale;
@@ -55,6 +58,7 @@ struct corner {
u32 save_ctl;
u32 save_irq;
u64 freq;
+ bool is_open_loop;
struct fuse_corner *fuse_corner;
};
@@ -81,7 +85,7 @@ int cpr_populate_ring_osc_idx(struct device *dev,
struct fuse_corner *fuse_corner,
const struct cpr_fuse *cpr_fuse,
int num_fuse_corners);
-const struct cpr_fuse *cpr_get_fuses(struct device *dev,
+const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid,
unsigned int num_fuse_corners);
int cpr_populate_fuse_common(struct device *dev,
struct fuse_corner_data *fdata,
@@ -91,7 +95,7 @@ int cpr_populate_fuse_common(struct device *dev,
int init_v_step);
int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk,
struct corner *corners, int num_corners);
-u32 cpr_get_fuse_corner(struct dev_pm_opp *opp);
+u32 cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid);
u64 cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, struct device *cpu_dev);
int cpr_calculate_scaling(struct device *dev,
const char *quot_offset,
diff --git a/drivers/soc/qcom/cpr.c b/drivers/soc/qcom/cpr.c
index 49c33b13b82b..bd94e19fc0fb 100644
--- a/drivers/soc/qcom/cpr.c
+++ b/drivers/soc/qcom/cpr.c
@@ -852,7 +852,7 @@ static int cpr_corner_init(struct cpr_drv *drv)
opp = dev_pm_opp_find_level_exact(&drv->pd.dev, level);
if (IS_ERR(opp))
return -EINVAL;
- fc = cpr_get_fuse_corner(opp);
+ fc = cpr_get_fuse_corner(opp, 0);
if (!fc) {
dev_pm_opp_put(opp);
return -EINVAL;
@@ -1326,7 +1326,7 @@ static int cpr_probe(struct platform_device *pdev)
if (ret)
return ret;
- drv->cpr_fuses = cpr_get_fuses(drv->dev, desc->num_fuse_corners);
+ drv->cpr_fuses = cpr_get_fuses(drv->dev, UINT_MAX, desc->num_fuse_corners);
if (IS_ERR(drv->cpr_fuses))
return PTR_ERR(drv->cpr_fuses);
--
2.41.0
From: AngeloGioacchino Del Regno <[email protected]>
Add the bindings for the CPR3 driver to the documentation.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
[Konrad: Make binding check pass; update AGdR's email]
Signed-off-by: Konrad Dybcio <[email protected]>
---
.../devicetree/bindings/soc/qcom/qcom,cpr3.yaml | 289 +++++++++++++++++++++
1 file changed, 289 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
new file mode 100644
index 000000000000..46b94dffaf85
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
@@ -0,0 +1,289 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr3.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Core Power Reduction v3/v4/Hardened (CPR3, CPR4, CPRh)
+
+description:
+ CPR (Core Power Reduction) is a technology to reduce core power of a CPU
+ (or another device). Each OPP of a device corresponds to a "corner" that
+ has a range of valid voltages for a particular frequency.
+ The CPR monitors dynamic factors such as temperature, etc. and suggests
+ or (in the CPR-hardened case) applies voltage adjustments to save power
+ and meet silicon characteristic requirements for a given chip unit.
+
+maintainers:
+ - AngeloGioacchino Del Regno <[email protected]>
+
+properties:
+ compatible:
+ oneOf:
+ - description: CPRv3 controller
+ items:
+ - const: qcom,cpr3
+ - description: CPRv4 controller
+ items:
+ - const: qcom,cpr4
+ - description: CPRv4-Hardened controller
+ items:
+ - enum:
+ - qcom,msm8998-cprh
+ - qcom,sdm630-cprh
+ - const: qcom,cprh
+
+ reg:
+ description: Base address and size of the CPR controller(s)
+ maxItems: 2
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: CPR reference clock
+
+ vdd-supply:
+ description: Autonomous Phase Control (APC) or other power supply
+
+ '#power-domain-cells':
+ const: 1
+
+ qcom,acc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to syscon for writing ACC settings
+
+ nvmem-cells:
+ description: Cells containing the fuse corners and revision data
+ maxItems: 32
+
+ nvmem-cell-names:
+ maxItems: 32
+
+ operating-points-v2: true
+
+ power-domains: true
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - operating-points-v2
+ - "#power-domain-cells"
+ - nvmem-cells
+ - nvmem-cell-names
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8998-cprh
+ then:
+ properties:
+ nvmem-cell-names:
+ items:
+ - const: cpr_speed_bin
+ - const: cpr_fuse_revision
+ - const: cpr0_quotient1
+ - const: cpr0_quotient2
+ - const: cpr0_quotient3
+ - const: cpr0_quotient4
+ - const: cpr0_quotient_offset2
+ - const: cpr0_quotient_offset3
+ - const: cpr0_quotient_offset4
+ - const: cpr0_init_voltage1
+ - const: cpr0_init_voltage2
+ - const: cpr0_init_voltage3
+ - const: cpr0_init_voltage4
+ - const: cpr0_ring_osc1
+ - const: cpr0_ring_osc2
+ - const: cpr0_ring_osc3
+ - const: cpr0_ring_osc4
+ - const: cpr1_quotient1
+ - const: cpr1_quotient2
+ - const: cpr1_quotient3
+ - const: cpr1_quotient4
+ - const: cpr1_quotient_offset2
+ - const: cpr1_quotient_offset3
+ - const: cpr1_quotient_offset4
+ - const: cpr1_init_voltage1
+ - const: cpr1_init_voltage2
+ - const: cpr1_init_voltage3
+ - const: cpr1_init_voltage4
+ - const: cpr1_ring_osc1
+ - const: cpr1_ring_osc2
+ - const: cpr1_ring_osc3
+ - const: cpr1_ring_osc4
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "qcom,kryo280";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ power-domains = <&apc_cprh 0>;
+ power-domain-names = "cprh";
+ };
+
+ cpu@100 {
+ compatible = "qcom,kryo280";
+ device_type = "cpu";
+ reg = <0x0 0x100>;
+ operating-points-v2 = <&cpu4_opp_table>;
+ power-domains = <&apc_cprh 1>;
+ power-domain-names = "cprh";
+ };
+ };
+
+ cpu0_opp_table: opp-table-cpu0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1843200000 {
+ opp-hz = /bits/ 64 <1843200000>;
+ required-opps = <&cprh_opp3>;
+ };
+
+ opp-1094400000 {
+ opp-hz = /bits/ 64 <1094400000>;
+ required-opps = <&cprh_opp2>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&cprh_opp1>;
+ };
+ };
+
+ cpu4_opp_table: opp-table-cpu4 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-2208000000 {
+ opp-hz = /bits/ 64 <2208000000>;
+ required-opps = <&cprh_opp3>;
+ };
+
+ opp-1113600000 {
+ opp-hz = /bits/ 64 <1113600000>;
+ required-opps = <&cprh_opp2>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&cprh_opp1>;
+ };
+ };
+
+ cprh_opp_table: opp-table-cprh {
+ compatible = "operating-points-v2-qcom-level";
+
+ cprh_opp1: opp-1 {
+ opp-level = <1>;
+ qcom,opp-fuse-level = <1>;
+ qcom,opp-cloop-vadj = <0>;
+ qcom,opp-oloop-vadj = <0>;
+ };
+
+ cprh_opp2: opp-2 {
+ opp-level = <2>;
+ qcom,opp-fuse-level = <2>;
+ qcom,opp-cloop-vadj = <0>;
+ qcom,opp-oloop-vadj = <0>;
+ };
+
+ cprh_opp3: opp-3 {
+ opp-level = <3>;
+ qcom,opp-fuse-level = <2 3>;
+ qcom,opp-cloop-vadj = <0>;
+ qcom,opp-oloop-vadj = <0>;
+ };
+ };
+
+ apc_cprh: power-controller@179c8000 {
+ compatible = "qcom,msm8998-cprh", "qcom,cprh";
+ reg = <0x0179c8000 0x4000>, <0x0179c4000 0x4000>;
+ clocks = <&gcc GCC_HMSS_RBCPR_CLK>;
+
+ operating-points-v2 = <&cprh_opp_table>;
+ #power-domain-cells = <1>;
+
+ nvmem-cells = <&cpr_efuse_speedbin>,
+ <&cpr_fuse_revision>,
+ <&cpr_quot0_pwrcl>,
+ <&cpr_quot1_pwrcl>,
+ <&cpr_quot2_pwrcl>,
+ <&cpr_quot3_pwrcl>,
+ <&cpr_quot_offset1_pwrcl>,
+ <&cpr_quot_offset2_pwrcl>,
+ <&cpr_quot_offset3_pwrcl>,
+ <&cpr_init_voltage0_pwrcl>,
+ <&cpr_init_voltage1_pwrcl>,
+ <&cpr_init_voltage2_pwrcl>,
+ <&cpr_init_voltage3_pwrcl>,
+ <&cpr_ro_sel0_pwrcl>,
+ <&cpr_ro_sel1_pwrcl>,
+ <&cpr_ro_sel2_pwrcl>,
+ <&cpr_ro_sel3_pwrcl>,
+ <&cpr_quot0_perfcl>,
+ <&cpr_quot1_perfcl>,
+ <&cpr_quot2_perfcl>,
+ <&cpr_quot3_perfcl>,
+ <&cpr_quot_offset1_perfcl>,
+ <&cpr_quot_offset2_perfcl>,
+ <&cpr_quot_offset3_perfcl>,
+ <&cpr_init_voltage0_perfcl>,
+ <&cpr_init_voltage1_perfcl>,
+ <&cpr_init_voltage2_perfcl>,
+ <&cpr_init_voltage3_perfcl>,
+ <&cpr_ro_sel0_perfcl>,
+ <&cpr_ro_sel1_perfcl>,
+ <&cpr_ro_sel2_perfcl>,
+ <&cpr_ro_sel3_perfcl>;
+ nvmem-cell-names = "cpr_speed_bin",
+ "cpr_fuse_revision",
+ "cpr0_quotient1",
+ "cpr0_quotient2",
+ "cpr0_quotient3",
+ "cpr0_quotient4",
+ "cpr0_quotient_offset2",
+ "cpr0_quotient_offset3",
+ "cpr0_quotient_offset4",
+ "cpr0_init_voltage1",
+ "cpr0_init_voltage2",
+ "cpr0_init_voltage3",
+ "cpr0_init_voltage4",
+ "cpr0_ring_osc1",
+ "cpr0_ring_osc2",
+ "cpr0_ring_osc3",
+ "cpr0_ring_osc4",
+ "cpr1_quotient1",
+ "cpr1_quotient2",
+ "cpr1_quotient3",
+ "cpr1_quotient4",
+ "cpr1_quotient_offset2",
+ "cpr1_quotient_offset3",
+ "cpr1_quotient_offset4",
+ "cpr1_init_voltage1",
+ "cpr1_init_voltage2",
+ "cpr1_init_voltage3",
+ "cpr1_init_voltage4",
+ "cpr1_ring_osc1",
+ "cpr1_ring_osc2",
+ "cpr1_ring_osc3",
+ "cpr1_ring_osc4";
+ };
+...
--
2.41.0
From: AngeloGioacchino Del Regno <[email protected]>
In preparation for implementing a new driver that will be handling
CPRv3, CPRv4 and CPR-Hardened, format out common functions to a new
file.
Update cpr_get_fuses in preparation for CPR3 implementation, change
parameters where necessary to not take cpr.c private data structures.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
[Konrad: rebase, apply review comments, improve msg, split]
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/soc/qcom/Makefile | 2 +-
drivers/soc/qcom/cpr-common.c | 350 ++++++++++++++++++++++++++++++++++++++
drivers/soc/qcom/cpr-common.h | 103 +++++++++++
drivers/soc/qcom/cpr.c | 384 +++---------------------------------------
4 files changed, 475 insertions(+), 364 deletions(-)
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 99114c71092b..82b23743371b 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -3,7 +3,7 @@ CFLAGS_rpmh-rsc.o := -I$(src)
obj-$(CONFIG_QCOM_AOSS_QMP) += qcom_aoss.o
obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o
obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
-obj-$(CONFIG_QCOM_CPR) += cpr.o
+obj-$(CONFIG_QCOM_CPR) += cpr-common.o cpr.o
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o
obj-$(CONFIG_QCOM_OCMEM) += ocmem.o
diff --git a/drivers/soc/qcom/cpr-common.c b/drivers/soc/qcom/cpr-common.c
new file mode 100644
index 000000000000..ea85f6b4bef8
--- /dev/null
+++ b/drivers/soc/qcom/cpr-common.c
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include "cpr-common.h"
+
+int cpr_populate_ring_osc_idx(struct device *dev,
+ struct fuse_corner *fuse_corner,
+ const struct cpr_fuse *cpr_fuse,
+ int num_fuse_corners)
+{
+ struct fuse_corner *end = fuse_corner + num_fuse_corners;
+ u32 data;
+ int ret;
+
+ for (; fuse_corner < end; fuse_corner++, cpr_fuse++) {
+ ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->ring_osc, &data);
+ if (ret)
+ return ret;
+ fuse_corner->ring_osc_idx = data;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cpr_populate_ring_osc_idx);
+
+static int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV,
+ int step_volt, const char *init_v_efuse,
+ struct device *dev)
+{
+ int steps, uV;
+ u32 bits = 0;
+ int ret;
+
+ ret = nvmem_cell_read_variable_le_u32(dev, init_v_efuse, &bits);
+ if (ret)
+ return ret;
+
+ steps = bits & ~BIT(init_v_width - 1);
+ /* Not two's complement.. instead highest bit is sign bit */
+ if (bits & BIT(init_v_width - 1))
+ steps = -steps;
+
+ uV = ref_uV + steps * step_size_uV;
+
+ return DIV_ROUND_UP(uV, step_volt) * step_volt;
+}
+
+const struct cpr_fuse *cpr_get_fuses(struct device *dev,
+ unsigned int num_fuse_corners)
+{
+ struct cpr_fuse *fuses;
+ int i;
+
+ fuses = devm_kcalloc(dev, num_fuse_corners, sizeof(*fuses), GFP_KERNEL);
+ if (!fuses)
+ return ERR_PTR(-ENOMEM);
+
+ for (i = 0; i < num_fuse_corners; i++) {
+ char tbuf[32];
+
+ snprintf(tbuf, 32, "cpr_ring_osc%d", i + 1);
+ fuses[i].ring_osc = devm_kstrdup(dev, tbuf, GFP_KERNEL);
+ if (!fuses[i].ring_osc)
+ return ERR_PTR(-ENOMEM);
+
+ snprintf(tbuf, 32, "cpr_init_voltage%d", i + 1);
+ fuses[i].init_voltage = devm_kstrdup(dev, tbuf, GFP_KERNEL);
+ if (!fuses[i].init_voltage)
+ return ERR_PTR(-ENOMEM);
+
+ snprintf(tbuf, 32, "cpr_quotient%d", i + 1);
+ fuses[i].quotient = devm_kstrdup(dev, tbuf, GFP_KERNEL);
+ if (!fuses[i].quotient)
+ return ERR_PTR(-ENOMEM);
+
+ snprintf(tbuf, 32, "cpr_quotient_offset%d", i + 1);
+ fuses[i].quotient_offset = devm_kstrdup(dev, tbuf, GFP_KERNEL);
+ if (!fuses[i].quotient_offset)
+ return ERR_PTR(-ENOMEM);
+ }
+
+ return fuses;
+}
+EXPORT_SYMBOL_GPL(cpr_get_fuses);
+
+int cpr_populate_fuse_common(struct device *dev,
+ struct fuse_corner_data *fdata,
+ const struct cpr_fuse *cpr_fuse,
+ struct fuse_corner *fuse_corner,
+ int step_volt, int init_v_width,
+ int init_v_step)
+{
+ int uV, ret;
+
+ /* Populate uV */
+ uV = cpr_read_fuse_uV(init_v_width, init_v_step,
+ fdata->ref_uV, step_volt,
+ cpr_fuse->init_voltage, dev);
+ if (uV < 0)
+ return uV;
+
+ /*
+ * Update SoC voltages: platforms might choose a different
+ * regulators than the one used to characterize the algorithms
+ * (ie, init_voltage_step).
+ */
+ fdata->min_uV = roundup(fdata->min_uV, step_volt);
+ fdata->max_uV = roundup(fdata->max_uV, step_volt);
+
+ fuse_corner->min_uV = fdata->min_uV;
+ fuse_corner->max_uV = fdata->max_uV;
+ fuse_corner->uV = clamp(uV, fuse_corner->min_uV, fuse_corner->max_uV);
+
+ /* Populate target quotient by scaling */
+ ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->quotient, &fuse_corner->quot);
+ if (ret)
+ return ret;
+
+ fuse_corner->quot *= fdata->quot_scale;
+ fuse_corner->quot += fdata->quot_offset;
+ fuse_corner->quot += fdata->quot_adjust;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cpr_populate_fuse_common);
+
+int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk,
+ struct corner *corners, int num_corners)
+{
+ unsigned long rate;
+ struct corner *iter, *corner;
+ const struct corner *end;
+ unsigned int i = 0;
+
+ if (!cpu_clk) {
+ dev_err(dev, "cannot get rate from NULL clk\n");
+ return -EINVAL;
+ }
+
+ end = &corners[num_corners - 1];
+ rate = clk_get_rate(cpu_clk);
+
+ /*
+ * Some bootloaders set a CPU clock frequency that is not defined
+ * in the OPP table. When running at an unlisted frequency,
+ * cpufreq_online() will change to the OPP which has the lowest
+ * frequency, at or above the unlisted frequency.
+ * Since cpufreq_online() always "rounds up" in the case of an
+ * unlisted frequency, this function always "rounds down" in case
+ * of an unlisted frequency. That way, when cpufreq_online()
+ * triggers the first ever call to cpr_set_performance_state(),
+ * it will correctly determine the direction as UP.
+ */
+ for (iter = corners; iter <= end; iter++) {
+ if (iter->freq > rate)
+ break;
+ i++;
+ if (iter->freq == rate) {
+ corner = iter;
+ break;
+ }
+ if (iter->freq < rate)
+ corner = iter;
+ }
+
+ if (!corner) {
+ dev_err(dev, "boot up corner not found\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "boot up perf state: %u\n", i);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cpr_find_initial_corner);
+
+unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp)
+{
+ struct device_node *np;
+ unsigned int fuse_corner = 0;
+
+ np = dev_pm_opp_get_of_node(opp);
+ if (of_property_read_u32(np, "qcom,opp-fuse-level", &fuse_corner))
+ pr_err("%s: missing 'qcom,opp-fuse-level' property\n",
+ __func__);
+
+ of_node_put(np);
+
+ return fuse_corner;
+}
+EXPORT_SYMBOL_GPL(cpr_get_fuse_corner);
+
+unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
+ struct device *cpu_dev)
+{
+ u64 rate = 0;
+ struct device_node *ref_np;
+ struct device_node *desc_np;
+ struct device_node *child_np = NULL;
+ struct device_node *child_req_np = NULL;
+
+ desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
+ if (!desc_np)
+ return 0;
+
+ ref_np = dev_pm_opp_get_of_node(ref);
+ if (!ref_np)
+ goto out_ref;
+
+ do {
+ of_node_put(child_req_np);
+ child_np = of_get_next_available_child(desc_np, child_np);
+ child_req_np = of_parse_phandle(child_np, "required-opps", 0);
+ } while (child_np && child_req_np != ref_np);
+
+ if (child_np && child_req_np == ref_np)
+ of_property_read_u64(child_np, "opp-hz", &rate);
+
+ of_node_put(child_req_np);
+ of_node_put(child_np);
+ of_node_put(ref_np);
+out_ref:
+ of_node_put(desc_np);
+
+ return (unsigned long) rate;
+}
+EXPORT_SYMBOL_GPL(cpr_get_opp_hz_for_req);
+
+int cpr_calculate_scaling(struct device *dev,
+ const char *quot_offset,
+ const struct fuse_corner_data *fdata,
+ const struct corner *corner)
+{
+ u32 quot_diff = 0;
+ unsigned long freq_diff;
+ int scaling;
+ const struct fuse_corner *fuse, *prev_fuse;
+ int ret;
+
+ fuse = corner->fuse_corner;
+ prev_fuse = fuse - 1;
+
+ if (quot_offset) {
+ ret = nvmem_cell_read_variable_le_u32(dev, quot_offset, "_diff);
+ if (ret)
+ return ret;
+
+ quot_diff *= fdata->quot_offset_scale;
+ quot_diff += fdata->quot_offset_adjust;
+ } else {
+ quot_diff = fuse->quot - prev_fuse->quot;
+ }
+
+ freq_diff = fuse->max_freq - prev_fuse->max_freq;
+ freq_diff /= 1000000; /* Convert to MHz */
+ scaling = 1000 * quot_diff / freq_diff;
+ return min(scaling, fdata->max_quot_scale);
+}
+EXPORT_SYMBOL_GPL(cpr_calculate_scaling);
+
+int cpr_interpolate(const struct corner *corner, int step_volt,
+ const struct fuse_corner_data *fdata)
+{
+ unsigned long f_high, f_low, f_diff;
+ int uV_high, uV_low, uV;
+ u64 temp, temp_limit;
+ const struct fuse_corner *fuse, *prev_fuse;
+
+ fuse = corner->fuse_corner;
+ prev_fuse = fuse - 1;
+
+ f_high = fuse->max_freq;
+ f_low = prev_fuse->max_freq;
+ uV_high = fuse->uV;
+ uV_low = prev_fuse->uV;
+ f_diff = fuse->max_freq - corner->freq;
+
+ /*
+ * Don't interpolate in the wrong direction. This could happen
+ * if the adjusted fuse voltage overlaps with the previous fuse's
+ * adjusted voltage.
+ */
+ if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq)
+ return corner->uV;
+
+ temp = f_diff * (uV_high - uV_low);
+ temp = div64_ul(temp, f_high - f_low);
+
+ /*
+ * max_volt_scale has units of uV/MHz while freq values
+ * have units of Hz. Divide by 1000000 to convert to.
+ */
+ temp_limit = f_diff * fdata->max_volt_scale;
+ do_div(temp_limit, 1000000);
+
+ uV = uV_high - min(temp, temp_limit);
+ return roundup(uV, step_volt);
+}
+EXPORT_SYMBOL_GPL(cpr_interpolate);
+
+int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg,
+ struct fuse_corner *f)
+{
+ int ret;
+
+ ret = regulator_is_supported_voltage(vreg, f->min_uV, f->min_uV);
+ if (!ret) {
+ dev_err(dev, "min uV: %d not supported by regulator\n",
+ f->min_uV);
+ return -EINVAL;
+ }
+
+ ret = regulator_is_supported_voltage(vreg, f->max_uV, f->max_uV);
+ if (!ret) {
+ dev_err(dev, "max uV: %d not supported by regulator\n",
+ f->max_uV);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cpr_check_vreg_constraints);
+
+MODULE_DESCRIPTION("Core Power Reduction (CPR) common");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/qcom/cpr-common.h b/drivers/soc/qcom/cpr-common.h
new file mode 100644
index 000000000000..1f2ebf9394cf
--- /dev/null
+++ b/drivers/soc/qcom/cpr-common.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/regulator/consumer.h>
+
+enum voltage_change_dir {
+ NO_CHANGE,
+ DOWN,
+ UP,
+};
+
+struct cpr_fuse {
+ char *ring_osc;
+ char *init_voltage;
+ char *quotient;
+ char *quotient_offset;
+};
+
+struct fuse_corner_data {
+ int ref_uV;
+ int max_uV;
+ int min_uV;
+ int max_volt_scale;
+ int max_quot_scale;
+ /* fuse quot */
+ int quot_offset;
+ int quot_scale;
+ int quot_adjust;
+ /* fuse quot_offset */
+ int quot_offset_scale;
+ int quot_offset_adjust;
+};
+
+struct fuse_corner {
+ int min_uV;
+ int max_uV;
+ int uV;
+ int quot;
+ int step_quot;
+ const struct reg_sequence *accs;
+ int num_accs;
+ unsigned long max_freq;
+ u8 ring_osc_idx;
+};
+
+struct corner {
+ int min_uV;
+ int max_uV;
+ int uV;
+ int last_uV;
+ int quot_adjust;
+ u32 save_ctl;
+ u32 save_irq;
+ unsigned long freq;
+ struct fuse_corner *fuse_corner;
+};
+
+struct corner_data {
+ unsigned int fuse_corner;
+ unsigned long freq;
+};
+
+struct acc_desc {
+ unsigned int enable_reg;
+ u32 enable_mask;
+
+ struct reg_sequence *config;
+ struct reg_sequence *settings;
+ int num_regs_per_fuse;
+};
+
+struct cpr_acc_desc {
+ const struct cpr_desc *cpr_desc;
+ const struct acc_desc *acc_desc;
+};
+
+int cpr_populate_ring_osc_idx(struct device *dev,
+ struct fuse_corner *fuse_corner,
+ const struct cpr_fuse *cpr_fuse,
+ int num_fuse_corners);
+const struct cpr_fuse *cpr_get_fuses(struct device *dev,
+ unsigned int num_fuse_corners);
+int cpr_populate_fuse_common(struct device *dev,
+ struct fuse_corner_data *fdata,
+ const struct cpr_fuse *cpr_fuse,
+ struct fuse_corner *fuse_corner,
+ int step_volt, int init_v_width,
+ int init_v_step);
+int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk,
+ struct corner *corners, int num_corners);
+u32 cpr_get_fuse_corner(struct dev_pm_opp *opp);
+unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
+ struct device *cpu_dev);
+int cpr_calculate_scaling(struct device *dev,
+ const char *quot_offset,
+ const struct fuse_corner_data *fdata,
+ const struct corner *corner);
+int cpr_interpolate(const struct corner *corner, int step_volt,
+ const struct fuse_corner_data *fdata);
+int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg,
+ struct fuse_corner *f);
diff --git a/drivers/soc/qcom/cpr.c b/drivers/soc/qcom/cpr.c
index 144ea68e0920..cc1e4c462d1f 100644
--- a/drivers/soc/qcom/cpr.c
+++ b/drivers/soc/qcom/cpr.c
@@ -26,6 +26,8 @@
#include <linux/clk.h>
#include <linux/nvmem-consumer.h>
+#include "cpr-common.h"
+
/* Register Offsets for RB-CPR and Bit Definitions */
/* RBCPR Version Register */
@@ -124,45 +126,12 @@
#define FUSE_REVISION_UNKNOWN (-1)
-enum voltage_change_dir {
- NO_CHANGE,
- DOWN,
- UP,
-};
-
-struct cpr_fuse {
- char *ring_osc;
- char *init_voltage;
- char *quotient;
- char *quotient_offset;
-};
-
-struct fuse_corner_data {
- int ref_uV;
- int max_uV;
- int min_uV;
- int max_volt_scale;
- int max_quot_scale;
- /* fuse quot */
- int quot_offset;
- int quot_scale;
- int quot_adjust;
- /* fuse quot_offset */
- int quot_offset_scale;
- int quot_offset_adjust;
-};
-
struct cpr_fuses {
int init_voltage_step;
int init_voltage_width;
struct fuse_corner_data *fuse_corner_data;
};
-struct corner_data {
- unsigned int fuse_corner;
- unsigned long freq;
-};
-
struct cpr_desc {
unsigned int num_fuse_corners;
int min_diff_quot;
@@ -184,44 +153,6 @@ struct cpr_desc {
bool reduce_to_corner_uV;
};
-struct acc_desc {
- unsigned int enable_reg;
- u32 enable_mask;
-
- struct reg_sequence *config;
- struct reg_sequence *settings;
- int num_regs_per_fuse;
-};
-
-struct cpr_acc_desc {
- const struct cpr_desc *cpr_desc;
- const struct acc_desc *acc_desc;
-};
-
-struct fuse_corner {
- int min_uV;
- int max_uV;
- int uV;
- int quot;
- int step_quot;
- const struct reg_sequence *accs;
- int num_accs;
- unsigned long max_freq;
- u8 ring_osc_idx;
-};
-
-struct corner {
- int min_uV;
- int max_uV;
- int uV;
- int last_uV;
- int quot_adjust;
- u32 save_ctl;
- u32 save_irq;
- unsigned long freq;
- struct fuse_corner *fuse_corner;
-};
-
struct cpr_drv {
unsigned int num_corners;
unsigned int ref_clk_khz;
@@ -801,50 +732,6 @@ static int cpr_set_performance_state(struct generic_pm_domain *domain,
return ret;
}
-static int
-cpr_populate_ring_osc_idx(struct cpr_drv *drv)
-{
- struct fuse_corner *fuse = drv->fuse_corners;
- struct fuse_corner *end = fuse + drv->desc->num_fuse_corners;
- const struct cpr_fuse *fuses = drv->cpr_fuses;
- u32 data;
- int ret;
-
- for (; fuse < end; fuse++, fuses++) {
- ret = nvmem_cell_read_variable_le_u32(drv->dev, fuses->ring_osc, &data);
- if (ret)
- return ret;
- fuse->ring_osc_idx = data;
- }
-
- return 0;
-}
-
-static int cpr_read_fuse_uV(const struct cpr_desc *desc,
- const struct fuse_corner_data *fdata,
- const char *init_v_efuse,
- int step_volt,
- struct cpr_drv *drv)
-{
- int step_size_uV, steps, uV;
- u32 bits = 0;
- int ret;
-
- ret = nvmem_cell_read_variable_le_u32(drv->dev, init_v_efuse, &bits);
- if (ret)
- return ret;
-
- steps = bits & ~BIT(desc->cpr_fuses.init_voltage_width - 1);
- /* Not two's complement.. instead highest bit is sign bit */
- if (bits & BIT(desc->cpr_fuses.init_voltage_width - 1))
- steps = -steps;
-
- step_size_uV = desc->cpr_fuses.init_voltage_step;
-
- uV = fdata->ref_uV + steps * step_size_uV;
- return DIV_ROUND_UP(uV, step_volt) * step_volt;
-}
-
static int cpr_fuse_corner_init(struct cpr_drv *drv)
{
const struct cpr_desc *desc = drv->desc;
@@ -854,7 +741,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
unsigned int step_volt;
struct fuse_corner_data *fdata;
struct fuse_corner *fuse, *end;
- int uV;
const struct reg_sequence *accs;
int ret;
@@ -870,23 +756,15 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
fdata = desc->cpr_fuses.fuse_corner_data;
for (i = 0; fuse <= end; fuse++, fuses++, i++, fdata++) {
- /*
- * Update SoC voltages: platforms might choose a different
- * regulators than the one used to characterize the algorithms
- * (ie, init_voltage_step).
- */
- fdata->min_uV = roundup(fdata->min_uV, step_volt);
- fdata->max_uV = roundup(fdata->max_uV, step_volt);
+ ret = cpr_populate_fuse_common(drv->dev, fdata, fuses,
+ fuse, step_volt,
+ desc->cpr_fuses.init_voltage_width,
+ desc->cpr_fuses.init_voltage_step);
+ if (ret)
+ return ret;
- /* Populate uV */
- uV = cpr_read_fuse_uV(desc, fdata, fuses->init_voltage,
- step_volt, drv);
- if (uV < 0)
- return uV;
- fuse->min_uV = fdata->min_uV;
- fuse->max_uV = fdata->max_uV;
- fuse->uV = clamp(uV, fuse->min_uV, fuse->max_uV);
+ fuse->step_quot = desc->step_quot[fuse->ring_osc_idx];
if (fuse == end) {
/*
@@ -924,25 +802,9 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
else if (fuse->uV < fuse->min_uV)
fuse->uV = fuse->min_uV;
- ret = regulator_is_supported_voltage(drv->vdd_apc,
- fuse->min_uV,
- fuse->min_uV);
- if (!ret) {
- dev_err(drv->dev,
- "min uV: %d (fuse corner: %d) not supported by regulator\n",
- fuse->min_uV, i);
- return -EINVAL;
- }
-
- ret = regulator_is_supported_voltage(drv->vdd_apc,
- fuse->max_uV,
- fuse->max_uV);
- if (!ret) {
- dev_err(drv->dev,
- "max uV: %d (fuse corner: %d) not supported by regulator\n",
- fuse->max_uV, i);
- return -EINVAL;
- }
+ ret = cpr_check_vreg_constraints(drv->dev, drv->vdd_apc, fuse);
+ if (ret)
+ return ret;
dev_dbg(drv->dev,
"fuse corner %d: [%d %d %d] RO%hhu quot %d squot %d\n",
@@ -953,126 +815,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
return 0;
}
-static int cpr_calculate_scaling(const char *quot_offset,
- struct cpr_drv *drv,
- const struct fuse_corner_data *fdata,
- const struct corner *corner)
-{
- u32 quot_diff = 0;
- unsigned long freq_diff;
- int scaling;
- const struct fuse_corner *fuse, *prev_fuse;
- int ret;
-
- fuse = corner->fuse_corner;
- prev_fuse = fuse - 1;
-
- if (quot_offset) {
- ret = nvmem_cell_read_variable_le_u32(drv->dev, quot_offset, "_diff);
- if (ret)
- return ret;
-
- quot_diff *= fdata->quot_offset_scale;
- quot_diff += fdata->quot_offset_adjust;
- } else {
- quot_diff = fuse->quot - prev_fuse->quot;
- }
-
- freq_diff = fuse->max_freq - prev_fuse->max_freq;
- freq_diff /= 1000000; /* Convert to MHz */
- scaling = 1000 * quot_diff / freq_diff;
- return min(scaling, fdata->max_quot_scale);
-}
-
-static int cpr_interpolate(const struct corner *corner, int step_volt,
- const struct fuse_corner_data *fdata)
-{
- unsigned long f_high, f_low, f_diff;
- int uV_high, uV_low, uV;
- u64 temp, temp_limit;
- const struct fuse_corner *fuse, *prev_fuse;
-
- fuse = corner->fuse_corner;
- prev_fuse = fuse - 1;
-
- f_high = fuse->max_freq;
- f_low = prev_fuse->max_freq;
- uV_high = fuse->uV;
- uV_low = prev_fuse->uV;
- f_diff = fuse->max_freq - corner->freq;
-
- /*
- * Don't interpolate in the wrong direction. This could happen
- * if the adjusted fuse voltage overlaps with the previous fuse's
- * adjusted voltage.
- */
- if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq)
- return corner->uV;
-
- temp = f_diff * (uV_high - uV_low);
- temp = div64_ul(temp, f_high - f_low);
-
- /*
- * max_volt_scale has units of uV/MHz while freq values
- * have units of Hz. Divide by 1000000 to convert to.
- */
- temp_limit = f_diff * fdata->max_volt_scale;
- do_div(temp_limit, 1000000);
-
- uV = uV_high - min(temp, temp_limit);
- return roundup(uV, step_volt);
-}
-
-static unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp)
-{
- struct device_node *np;
- unsigned int fuse_corner = 0;
-
- np = dev_pm_opp_get_of_node(opp);
- if (of_property_read_u32(np, "qcom,opp-fuse-level", &fuse_corner))
- pr_err("%s: missing 'qcom,opp-fuse-level' property\n",
- __func__);
-
- of_node_put(np);
-
- return fuse_corner;
-}
-
-static unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
- struct device *cpu_dev)
-{
- u64 rate = 0;
- struct device_node *ref_np;
- struct device_node *desc_np;
- struct device_node *child_np = NULL;
- struct device_node *child_req_np = NULL;
-
- desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
- if (!desc_np)
- return 0;
-
- ref_np = dev_pm_opp_get_of_node(ref);
- if (!ref_np)
- goto out_ref;
-
- do {
- of_node_put(child_req_np);
- child_np = of_get_next_available_child(desc_np, child_np);
- child_req_np = of_parse_phandle(child_np, "required-opps", 0);
- } while (child_np && child_req_np != ref_np);
-
- if (child_np && child_req_np == ref_np)
- of_property_read_u64(child_np, "opp-hz", &rate);
-
- of_node_put(child_req_np);
- of_node_put(child_np);
- of_node_put(ref_np);
-out_ref:
- of_node_put(desc_np);
-
- return (unsigned long) rate;
-}
-
static int cpr_corner_init(struct cpr_drv *drv)
{
const struct cpr_desc *desc = drv->desc;
@@ -1186,7 +928,7 @@ static int cpr_corner_init(struct cpr_drv *drv)
corner->uV = fuse->uV;
if (prev_fuse && cdata[i - 1].freq == prev_fuse->max_freq) {
- scaling = cpr_calculate_scaling(quot_offset, drv,
+ scaling = cpr_calculate_scaling(drv->dev, quot_offset,
fdata, corner);
if (scaling < 0)
return scaling;
@@ -1224,47 +966,6 @@ static int cpr_corner_init(struct cpr_drv *drv)
return 0;
}
-static const struct cpr_fuse *cpr_get_fuses(struct cpr_drv *drv)
-{
- const struct cpr_desc *desc = drv->desc;
- struct cpr_fuse *fuses;
- int i;
-
- fuses = devm_kcalloc(drv->dev, desc->num_fuse_corners,
- sizeof(struct cpr_fuse),
- GFP_KERNEL);
- if (!fuses)
- return ERR_PTR(-ENOMEM);
-
- for (i = 0; i < desc->num_fuse_corners; i++) {
- char tbuf[32];
-
- snprintf(tbuf, 32, "cpr_ring_osc%d", i + 1);
- fuses[i].ring_osc = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL);
- if (!fuses[i].ring_osc)
- return ERR_PTR(-ENOMEM);
-
- snprintf(tbuf, 32, "cpr_init_voltage%d", i + 1);
- fuses[i].init_voltage = devm_kstrdup(drv->dev, tbuf,
- GFP_KERNEL);
- if (!fuses[i].init_voltage)
- return ERR_PTR(-ENOMEM);
-
- snprintf(tbuf, 32, "cpr_quotient%d", i + 1);
- fuses[i].quotient = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL);
- if (!fuses[i].quotient)
- return ERR_PTR(-ENOMEM);
-
- snprintf(tbuf, 32, "cpr_quotient_offset%d", i + 1);
- fuses[i].quotient_offset = devm_kstrdup(drv->dev, tbuf,
- GFP_KERNEL);
- if (!fuses[i].quotient_offset)
- return ERR_PTR(-ENOMEM);
- }
-
- return fuses;
-}
-
static void cpr_set_loop_allowed(struct cpr_drv *drv)
{
drv->loop_disabled = false;
@@ -1296,54 +997,6 @@ static int cpr_init_parameters(struct cpr_drv *drv)
return 0;
}
-static int cpr_find_initial_corner(struct cpr_drv *drv)
-{
- unsigned long rate;
- const struct corner *end;
- struct corner *iter;
- unsigned int i = 0;
-
- if (!drv->cpu_clk) {
- dev_err(drv->dev, "cannot get rate from NULL clk\n");
- return -EINVAL;
- }
-
- end = &drv->corners[drv->num_corners - 1];
- rate = clk_get_rate(drv->cpu_clk);
-
- /*
- * Some bootloaders set a CPU clock frequency that is not defined
- * in the OPP table. When running at an unlisted frequency,
- * cpufreq_online() will change to the OPP which has the lowest
- * frequency, at or above the unlisted frequency.
- * Since cpufreq_online() always "rounds up" in the case of an
- * unlisted frequency, this function always "rounds down" in case
- * of an unlisted frequency. That way, when cpufreq_online()
- * triggers the first ever call to cpr_set_performance_state(),
- * it will correctly determine the direction as UP.
- */
- for (iter = drv->corners; iter <= end; iter++) {
- if (iter->freq > rate)
- break;
- i++;
- if (iter->freq == rate) {
- drv->corner = iter;
- break;
- }
- if (iter->freq < rate)
- drv->corner = iter;
- }
-
- if (!drv->corner) {
- dev_err(drv->dev, "boot up corner not found\n");
- return -EINVAL;
- }
-
- dev_dbg(drv->dev, "boot up perf state: %u\n", i);
-
- return 0;
-}
-
static const struct cpr_desc qcs404_cpr_desc = {
.num_fuse_corners = 3,
.min_diff_quot = CPR_FUSE_MIN_QUOT_DIFF,
@@ -1531,7 +1184,8 @@ static int cpr_pd_attach_dev(struct generic_pm_domain *domain,
if (ret)
goto unlock;
- ret = cpr_find_initial_corner(drv);
+ ret = cpr_find_initial_corner(drv->dev, drv->cpu_clk, drv->corners,
+ drv->num_corners);
if (ret)
goto unlock;
@@ -1616,6 +1270,7 @@ static int cpr_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct cpr_drv *drv;
+ const struct cpr_desc *desc;
int irq, ret;
const struct cpr_acc_desc *data;
struct device_node *np;
@@ -1631,6 +1286,7 @@ static int cpr_probe(struct platform_device *pdev)
drv->dev = dev;
drv->desc = data->cpr_desc;
drv->acc_desc = data->acc_desc;
+ desc = drv->desc;
drv->fuse_corners = devm_kcalloc(dev, drv->desc->num_fuse_corners,
sizeof(*drv->fuse_corners),
@@ -1670,11 +1326,13 @@ static int cpr_probe(struct platform_device *pdev)
if (ret)
return ret;
- drv->cpr_fuses = cpr_get_fuses(drv);
+ drv->cpr_fuses = cpr_get_fuses(drv->dev, desc->num_fuse_corners);
if (IS_ERR(drv->cpr_fuses))
return PTR_ERR(drv->cpr_fuses);
- ret = cpr_populate_ring_osc_idx(drv);
+ ret = cpr_populate_ring_osc_idx(drv->dev, drv->fuse_corners,
+ drv->cpr_fuses,
+ desc->num_fuse_corners);
if (ret)
return ret;
--
2.41.0
From: AngeloGioacchino Del Regno <[email protected]>
CPR3 makes use of post-calculation flat value adjustments. Add the
necessary bits to the common functions to support it.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
[Konrad: separate this patch out of a bigger one]
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/soc/qcom/cpr-common.c | 9 ++++++---
drivers/soc/qcom/cpr-common.h | 1 +
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/soc/qcom/cpr-common.c b/drivers/soc/qcom/cpr-common.c
index ea85f6b4bef8..44c681bbbf13 100644
--- a/drivers/soc/qcom/cpr-common.c
+++ b/drivers/soc/qcom/cpr-common.c
@@ -49,7 +49,7 @@ int cpr_populate_ring_osc_idx(struct device *dev,
EXPORT_SYMBOL_GPL(cpr_populate_ring_osc_idx);
static int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV,
- int step_volt, const char *init_v_efuse,
+ int adj, int step_volt, const char *init_v_efuse,
struct device *dev)
{
int steps, uV;
@@ -67,6 +67,9 @@ static int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV,
uV = ref_uV + steps * step_size_uV;
+ /* Apply open-loop fixed adjustments to fused values */
+ uV += adj;
+
return DIV_ROUND_UP(uV, step_volt) * step_volt;
}
@@ -119,8 +122,8 @@ int cpr_populate_fuse_common(struct device *dev,
/* Populate uV */
uV = cpr_read_fuse_uV(init_v_width, init_v_step,
- fdata->ref_uV, step_volt,
- cpr_fuse->init_voltage, dev);
+ fdata->ref_uV, fdata->volt_oloop_adjust,
+ step_volt, cpr_fuse->init_voltage, dev);
if (uV < 0)
return uV;
diff --git a/drivers/soc/qcom/cpr-common.h b/drivers/soc/qcom/cpr-common.h
index 1f2ebf9394cf..0aa227617d2f 100644
--- a/drivers/soc/qcom/cpr-common.h
+++ b/drivers/soc/qcom/cpr-common.h
@@ -22,6 +22,7 @@ struct fuse_corner_data {
int ref_uV;
int max_uV;
int min_uV;
+ int volt_oloop_adjust;
int max_volt_scale;
int max_quot_scale;
/* fuse quot */
--
2.41.0
32 bits is not enough for over-2.changeGHz frequencies. Move all variables
that operate on Hz to u64 to avoid overflows.
Signed-off-by: Konrad Dybcio <[email protected]>
---
drivers/soc/qcom/cpr-common.c | 13 +++++++------
drivers/soc/qcom/cpr-common.h | 9 ++++-----
drivers/soc/qcom/cpr.c | 8 ++++----
3 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/soc/qcom/cpr-common.c b/drivers/soc/qcom/cpr-common.c
index 44c681bbbf13..3e3a4a61cfde 100644
--- a/drivers/soc/qcom/cpr-common.c
+++ b/drivers/soc/qcom/cpr-common.c
@@ -218,7 +218,7 @@ unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp)
}
EXPORT_SYMBOL_GPL(cpr_get_fuse_corner);
-unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
+u64 cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
struct device *cpu_dev)
{
u64 rate = 0;
@@ -250,7 +250,7 @@ unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
out_ref:
of_node_put(desc_np);
- return (unsigned long) rate;
+ return rate;
}
EXPORT_SYMBOL_GPL(cpr_get_opp_hz_for_req);
@@ -260,7 +260,7 @@ int cpr_calculate_scaling(struct device *dev,
const struct corner *corner)
{
u32 quot_diff = 0;
- unsigned long freq_diff;
+ u64 freq_diff;
int scaling;
const struct fuse_corner *fuse, *prev_fuse;
int ret;
@@ -280,8 +280,9 @@ int cpr_calculate_scaling(struct device *dev,
}
freq_diff = fuse->max_freq - prev_fuse->max_freq;
- freq_diff /= 1000000; /* Convert to MHz */
- scaling = 1000 * quot_diff / freq_diff;
+ freq_diff = div_u64(freq_diff, 1000000); /* Convert to MHz */
+ scaling = 1000 * quot_diff;
+ do_div(scaling, freq_diff);
return min(scaling, fdata->max_quot_scale);
}
EXPORT_SYMBOL_GPL(cpr_calculate_scaling);
@@ -289,7 +290,7 @@ EXPORT_SYMBOL_GPL(cpr_calculate_scaling);
int cpr_interpolate(const struct corner *corner, int step_volt,
const struct fuse_corner_data *fdata)
{
- unsigned long f_high, f_low, f_diff;
+ u64 f_high, f_low, f_diff;
int uV_high, uV_low, uV;
u64 temp, temp_limit;
const struct fuse_corner *fuse, *prev_fuse;
diff --git a/drivers/soc/qcom/cpr-common.h b/drivers/soc/qcom/cpr-common.h
index 0aa227617d2f..1b2fa344eb09 100644
--- a/drivers/soc/qcom/cpr-common.h
+++ b/drivers/soc/qcom/cpr-common.h
@@ -42,7 +42,7 @@ struct fuse_corner {
int step_quot;
const struct reg_sequence *accs;
int num_accs;
- unsigned long max_freq;
+ u64 max_freq;
u8 ring_osc_idx;
};
@@ -54,13 +54,13 @@ struct corner {
int quot_adjust;
u32 save_ctl;
u32 save_irq;
- unsigned long freq;
+ u64 freq;
struct fuse_corner *fuse_corner;
};
struct corner_data {
unsigned int fuse_corner;
- unsigned long freq;
+ u64 freq;
};
struct acc_desc {
@@ -92,8 +92,7 @@ int cpr_populate_fuse_common(struct device *dev,
int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk,
struct corner *corners, int num_corners);
u32 cpr_get_fuse_corner(struct dev_pm_opp *opp);
-unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
- struct device *cpu_dev);
+u64 cpr_get_opp_hz_for_req(struct dev_pm_opp *ref, struct device *cpu_dev);
int cpr_calculate_scaling(struct device *dev,
const char *quot_offset,
const struct fuse_corner_data *fdata,
diff --git a/drivers/soc/qcom/cpr.c b/drivers/soc/qcom/cpr.c
index cc1e4c462d1f..49c33b13b82b 100644
--- a/drivers/soc/qcom/cpr.c
+++ b/drivers/soc/qcom/cpr.c
@@ -827,8 +827,8 @@ static int cpr_corner_init(struct cpr_drv *drv)
struct corner_data *cdata;
const struct fuse_corner_data *fdata;
bool apply_scaling;
- unsigned long freq_diff, freq_diff_mhz;
- unsigned long freq;
+ unsigned long freq_diff_mhz;
+ u64 freq, freq_diff;
int step_volt = regulator_get_linear_step(drv->vdd_apc);
struct dev_pm_opp *opp;
@@ -867,7 +867,7 @@ static int cpr_corner_init(struct cpr_drv *drv)
cdata[level - 1].freq = freq;
fuse = &drv->fuse_corners[fnum];
- dev_dbg(drv->dev, "freq: %lu level: %u fuse level: %u\n",
+ dev_dbg(drv->dev, "freq: %llu level: %u fuse level: %u\n",
freq, dev_pm_opp_get_level(opp) - 1, fnum);
if (freq > fuse->max_freq)
fuse->max_freq = freq;
@@ -941,7 +941,7 @@ static int cpr_corner_init(struct cpr_drv *drv)
if (apply_scaling) {
freq_diff = fuse->max_freq - corner->freq;
- freq_diff_mhz = freq_diff / 1000000;
+ freq_diff_mhz = (u32)div_u64(freq_diff, 1000000);
corner->quot_adjust = scaling * freq_diff_mhz / 1000;
corner->uV = cpr_interpolate(corner, step_volt, fdata);
--
2.41.0
On Wed, 28 Jun 2023 16:00:42 +0200, Konrad Dybcio wrote:
> CPR3 and newer can be fed per-OPP voltage adjustment values for both
> open- and closed-loop paths to make better decisions about settling
> on the final voltage offset target. Document these properties.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> .../devicetree/bindings/opp/opp-v2-qcom-level.yaml | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic']
Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic']
Documentation/devicetree/bindings/i2c/qcom,i2c-cci.example.dtb: /example-0/cci@ac4a000/i2c-bus@1/camera@60: failed to match any schema with compatible: ['ovti,ov7251']
Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: /example-0/usb/mdio@1/switch@0: failed to match any schema with compatible: ['marvell,mv88e6190']
Documentation/devicetree/bindings/net/qca,ar71xx.example.dtb: /example-0/ethernet@1a000000/mdio/switch@10: failed to match any schema with compatible: ['qca,ar9331-switch']
Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.example.dtb: /example-0/memory-controller@13410000/ethernet@6: failed to match any schema with compatible: ['davicom,dm9000']
Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.example.dtb: /example-0/iomcu@ffd7e000: failed to match any schema with compatible: ['hisilicon,hi3660-iomcu', 'syscon']
Documentation/devicetree/bindings/leds/common.example.dtb: /example-2/i2c/led-controller@30: failed to match any schema with compatible: ['panasonic,an30259a']
Documentation/devicetree/bindings/dma/dma-router.example.dtb: /example-0/dma-router@4a002b78: failed to match any schema with compatible: ['ti,dra7-dma-crossbar']
Documentation/devicetree/bindings/dma/dma-controller.example.dtb: /example-0/dma-controller@48000000: failed to match any schema with compatible: ['ti,omap-sdma']
Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: /example-0/parent/i2c/camera@36: failed to match any schema with compatible: ['ovti,ov5695']
Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@20e00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@1e700010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart']
Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.example.dtb: /example-0/cpuctrl@a22000/clock@0: failed to match any schema with compatible: ['hisilicon,hix5hd2-clock']
Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@8a20000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy']
Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.example.dtb: /example-0/system-controller@802000/clock@0: failed to match any schema with compatible: ['hisilicon,hi3620-clock']
Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/cpu: failed to match any schema with compatible: ['cpu-driver']
Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/codec: failed to match any schema with compatible: ['codec-driver']
Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.example.dtb: /example-0/pmic@0: failed to match any schema with compatible: ['sprd,sc2731']
Documentation/devicetree/bindings/input/mediatek,pmic-keys.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['mediatek,mt6397']
Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/thermal/imx-thermal.example.dtb: /example-0/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6q-anatop', 'syscon', 'simple-mfd']
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On Wed, 28 Jun 2023 16:00:43 +0200, Konrad Dybcio wrote:
> From: AngeloGioacchino Del Regno <[email protected]>
>
> Add the bindings for the CPR3 driver to the documentation.
>
> Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
> [Konrad: Make binding check pass; update AGdR's email]
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml | 289 +++++++++++++++++++++
> 1 file changed, 289 insertions(+)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic']
Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic']
Documentation/devicetree/bindings/i2c/qcom,i2c-cci.example.dtb: /example-0/cci@ac4a000/i2c-bus@1/camera@60: failed to match any schema with compatible: ['ovti,ov7251']
Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: /example-0/usb/mdio@1/switch@0: failed to match any schema with compatible: ['marvell,mv88e6190']
Documentation/devicetree/bindings/net/qca,ar71xx.example.dtb: /example-0/ethernet@1a000000/mdio/switch@10: failed to match any schema with compatible: ['qca,ar9331-switch']
Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.example.dtb: /example-0/memory-controller@13410000/ethernet@6: failed to match any schema with compatible: ['davicom,dm9000']
Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.example.dtb: /example-0/iomcu@ffd7e000: failed to match any schema with compatible: ['hisilicon,hi3660-iomcu', 'syscon']
Documentation/devicetree/bindings/leds/common.example.dtb: /example-2/i2c/led-controller@30: failed to match any schema with compatible: ['panasonic,an30259a']
Documentation/devicetree/bindings/dma/dma-router.example.dtb: /example-0/dma-router@4a002b78: failed to match any schema with compatible: ['ti,dra7-dma-crossbar']
Documentation/devicetree/bindings/dma/dma-controller.example.dtb: /example-0/dma-controller@48000000: failed to match any schema with compatible: ['ti,omap-sdma']
Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: /example-0/parent/i2c/camera@36: failed to match any schema with compatible: ['ovti,ov5695']
Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@20e00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@1e700010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart']
Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.example.dtb: /example-0/cpuctrl@a22000/clock@0: failed to match any schema with compatible: ['hisilicon,hix5hd2-clock']
Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@8a20000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy']
Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.example.dtb: /example-0/system-controller@802000/clock@0: failed to match any schema with compatible: ['hisilicon,hi3620-clock']
Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/cpu: failed to match any schema with compatible: ['cpu-driver']
Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/codec: failed to match any schema with compatible: ['codec-driver']
Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.example.dtb: /example-0/pmic@0: failed to match any schema with compatible: ['sprd,sc2731']
Documentation/devicetree/bindings/input/mediatek,pmic-keys.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['mediatek,mt6397']
Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/thermal/imx-thermal.example.dtb: /example-0/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6q-anatop', 'syscon', 'simple-mfd']
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-1: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-2: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-3: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On 6/28/2023 8:00 AM, Konrad Dybcio wrote:
> Changes in v12:
> - Add the !independent! patch to block cpufreq-dt from probing on 8998 (it tries
> to when we attach OPP tables to the CPU nodes)
> - Include all promised changes to the CPR3 driver from v11 (I managed to
> send the wrong version of that patch last time around..)
> - Partially rewrite debugfs code (to make it work and be cleaner)
> - use FIELD_PREP/GET throughout the driver (managed to squash a bug when
> exploring that)
> - Fix and finish the removal of cpr_get_ro_factor() by introducing
> cpr_thread_desc.ro_scaling_factor_common
> - Replace underscores in node names with '-'
> - Fix some formatstring issues that clang apparently doesn't care about
> - Link to v11: https://lore.kernel.org/r/[email protected]
>
> Add support for Core Power Reduction v3, v4 and Hardened
>
> Changes in v11:
>
> CPR COMMON:
> - split the commonizing patch, make it actually do what it says on the
> tin..
> - fix some overflow bugs
>
> CPR3:
> - fix some overflow bugs
> - don't assume "lack of qcom,opp-?loop-vadj" means val=0"
>
> CPR BINDINGS:
> - drop quotes in items
> - drop clock-names (there's just a single one)
> - rewrite the description a bit
> - fix up the example
> - drop bogus minItems
> - "acc-syscon" -> "qcom,acc"
>
> DTS:
> - fix qfprom children so that the bits=<> doesn't overflow reg[size]
> - drop unrelated changes
> - place one reg entry per line
>
> Link to v10: https://lore.kernel.org/r/[email protected]
>
> Changes in v10:
> - Skip "Let qcom,opp-fuse-level be a 2-long array" (Applied by Viresh)
> - Use b4 (it may be the first time you're receiving this if git send-email
> omitted you before..)
> - +Cc Robert Marko (expressed interest in previous revisions)
> - Add "Document CPR3 open/closed loop volt adjustment"
> CPR:
> - %hhu -> %u (checkpatch)
> CPR BINDINGS:
> - Drop QCS404 fuse set (it doesn't use this driver, what did I even think..)
> but leave the allOf:if: block for expansion (sdm660, msm8996, ipqABCD should
> follow soon..)
> - Drop Rob's R-b (as things changed *again*, please take one more look to make
> sure you're okay with this file, Rob..)
>
> Link to v9:
> https://lore.kernel.org/linux-arm-msm/[email protected]/
>
> Changes in v9:
> - Restore forgotten MAINTAINERS patch (oops)
> CPR:
> - Include the missing header (big oops!)
> - Fix kconfig dependencies
> CPR bindings:
> - Fix cpu reg in example (why didn't dt_binding_check scream at that)
> - Add newlines between nodes in example
> - Change opp table node names to opp-table-cpu[04]
> - Change opp table labels to cpu[04]_opp_table
> - Change CPRh opp subnode names to opp-N from oppN
> - Remove some stray newlines
> - Bring back nvmem-cell-names and add the 8998's set
> - Allow power-domains for VDDCX_AO voting
> - Remove Rob's r-b, there's been quite a bit of changes..
> CPR DT:
> - Send the correct revision of the patch this time around..
> OPP bindings:
> - Add Rob's ack
>
> Link to v8:
> https://lore.kernel.org/linux-arm-msm/[email protected]/
>
> Changes in v8:
> - Overtake this series from AGdR
> - Apply all review comments from v7 except Vladimir's request to
> not create the include/ header; it will be strictly necessary for
> OSM-aware cpufreq_hw programming, which this series was more or
> less created just for..
> - Drop QCS404 dtsi change, account for not breaking backwards compat
> in [3/5]
> - Add type phandle type reference to acc-syscon in [1/5]
> - Update AGdR's email addresses for maintainer entries
> - Add [2/5] to make dt_binding_check happy
> - Separate the CPRh DT addition from cpufreq_hw addition, sort and
> properly indent new nodes
> - Drop CPR yaml conversion, that happened in meantime
> - Reorder the patches to make a bit more sense
> - Tested again on MSM8998 Xperia XZ Premium (Maple)
> - I take no responsibility for AGdR's cheeky jokes, only the code!
>
> Link to v7:
> https://lore.kernel.org/lkml/[email protected]/
>
> Changes in v7:
> - Rebased on linux-next as of 210901
> - Changed cpr_read_efuse calls to nvmem_cell_read_variable_le_u32,
> following what was done in commit c77634b9d916
>
> Changes in v6:
> - Fixes from Bjorn's review
> - After a conversation with Viresh, it turned out I was abusing the
> OPP API to pass the APM and MEM-ACC thresholds to qcom-cpufreq-hw,
> so now the driver is using the genpd created virtual device and
> passing drvdata instead to stop the abuse
> - Since the CPR commonization was ignored for more than 6 months,
> it is now included in the CPRv3/4/h series, as there is no point
> in commonizing without having this driver
> - Rebased on v5.13
>
> Changes in v5:
> - Fixed getting OPP table when not yet installed by the caller
> of power domain attachment
>
> Changes in v4:
> - Huge patch series has been split for better reviewability,
> as suggested by Bjorn
>
> Changes in v3:
> - Fixed YAML doc issues
> - Removed unused variables and redundant if branch
>
> Changes in v2:
> - Implemented dynamic Memory Accelerator corners support, needed
> by MSM8998
> - Added MSM8998 Silver/Gold parameters
>
> This commit introduces a new driver, based on the one for cpr v1,
> to enable support for the newer Qualcomm Core Power Reduction
> hardware, known downstream as CPR3, CPR4 and CPRh, and support
> for MSM8998 and SDM630 CPU power reduction.
>
> In these new versions of the hardware, support for various new
> features was introduced, including voltage reduction for the GPU,
> security hardening and a new way of controlling CPU DVFS,
> consisting in internal communication between microcontrollers,
> specifically the CPR-Hardened and the Operating State Manager.
>
> The CPR v3, v4 and CPRh are present in a broad range of SoCs,
> from the mid-range to the high end ones including, but not limited
> to, MSM8953/8996/8998, SDM630/636/660/845.
>
> As to clarify, SDM845 does the CPR/SAW/OSM setup in TZ firmware, but
> this is limited to the CPU context; despite GPU CPR support being not
> implemented in this series, it is planned for the future, and some
> SDM845 need the CPR (in the context of GPU CPR) to be configured from
> this driver.
>
> It is also planned to add the CPR data for MSM8996, since this driver
> does support the CPRv4 found on that SoC, but I currently have no time
> to properly test that on a real device, so I prefer getting this big
> implementation merged before adding more things on top.
>
> As for MSM8953, we (read: nobody from SoMainline) have no device with
> this chip: since we are unable to test the cpr data and the entire
> driver on that one, we currently have no plans to do this addition
> in the future. This is left to other nice developers: I'm sure that
> somebody will come up with that, sooner or later
>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> AngeloGioacchino Del Regno (8):
> cpufreq: blacklist MSM8998 in cpufreq-dt-platdev
> MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver
> dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver
> soc: qcom: cpr: Move common functions to new file
> soc: qcom: cpr-common: Add support for flat fuse adjustment
> soc: qcom: cpr-common: Add threads support
> soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened
> arm64: dts: qcom: msm8998: Configure CPRh
>
> Konrad Dybcio (2):
> dt-bindings: opp: v2-qcom-level: Document CPR3 open/closed loop volt adjustment
> soc: qcom: cpr: Use u64 for frequency
>
> .../devicetree/bindings/opp/opp-v2-qcom-level.yaml | 14 +
> .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml | 289 ++
> MAINTAINERS | 6 +
> arch/arm64/boot/dts/qcom/msm8998.dtsi | 757 ++++++
> drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
> drivers/soc/qcom/Kconfig | 22 +
> drivers/soc/qcom/Makefile | 2 +
> drivers/soc/qcom/cpr-common.c | 362 +++
> drivers/soc/qcom/cpr-common.h | 109 +
> drivers/soc/qcom/cpr.c | 394 +--
> drivers/soc/qcom/cpr3.c | 2855 ++++++++++++++++++++
> include/soc/qcom/cpr.h | 17 +
> 12 files changed, 4460 insertions(+), 368 deletions(-)
> ---
> base-commit: 5c875096d59010cee4e00da1f9c7bdb07a025dc2
> change-id: 20230217-topic-cpr3h-de232bfb47ec
>
> Best regards,
Tested on the Lenovo Miix 630 (8998). No issues observed.
Tested-by: Jeffrey Hugo <[email protected]>
On Wed, Jun 28, 2023 at 04:00:40PM +0200, Konrad Dybcio wrote:
> From: AngeloGioacchino Del Regno <[email protected]>
>
> Add the MSM8998 to the blacklist since the CPU scaling is handled
s/blacklist/denylist/ or s/blacklist/blocklist/
> out of this.
>
> Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> index e2b20080de3a..adb3579a1fee 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> @@ -143,6 +143,7 @@ static const struct of_device_id blocklist[] __initconst = {
>
> { .compatible = "qcom,apq8096", },
> { .compatible = "qcom,msm8996", },
> + { .compatible = "qcom,msm8998", },
> { .compatible = "qcom,qcs404", },
> { .compatible = "qcom,sa8155p" },
> { .compatible = "qcom,sa8540p" },
>
> --
> 2.41.0
>
On Wed, Jun 28, 2023 at 04:00:43PM +0200, Konrad Dybcio wrote:
> From: AngeloGioacchino Del Regno <[email protected]>
>
> Add the bindings for the CPR3 driver to the documentation.
Bindings are for h/w, not drivers.
>
> Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
> [Konrad: Make binding check pass; update AGdR's email]
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml | 289 +++++++++++++++++++++
> 1 file changed, 289 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
> new file mode 100644
> index 000000000000..46b94dffaf85
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
> @@ -0,0 +1,289 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr3.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
Drop quotes
> +
> +title: Qualcomm Core Power Reduction v3/v4/Hardened (CPR3, CPR4, CPRh)
> +
> +description:
> + CPR (Core Power Reduction) is a technology to reduce core power of a CPU
> + (or another device). Each OPP of a device corresponds to a "corner" that
> + has a range of valid voltages for a particular frequency.
> + The CPR monitors dynamic factors such as temperature, etc. and suggests
> + or (in the CPR-hardened case) applies voltage adjustments to save power
> + and meet silicon characteristic requirements for a given chip unit.
> +
> +maintainers:
> + - AngeloGioacchino Del Regno <[email protected]>
> +
> +properties:
> + compatible:
> + oneOf:
> + - description: CPRv3 controller
> + items:
> + - const: qcom,cpr3
> + - description: CPRv4 controller
> + items:
> + - const: qcom,cpr4
> + - description: CPRv4-Hardened controller
> + items:
> + - enum:
> + - qcom,msm8998-cprh
> + - qcom,sdm630-cprh
> + - const: qcom,cprh
> +
> + reg:
> + description: Base address and size of the CPR controller(s)
> + maxItems: 2
What is each entry?
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: CPR reference clock
> +
> + vdd-supply:
> + description: Autonomous Phase Control (APC) or other power supply
> +
> + '#power-domain-cells':
> + const: 1
> +
> + qcom,acc:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: phandle to syscon for writing ACC settings
> +
> + nvmem-cells:
> + description: Cells containing the fuse corners and revision data
> + maxItems: 32
> +
> + nvmem-cell-names:
> + maxItems: 32
> +
> + operating-points-v2: true
> +
> + power-domains: true
Need to define how many.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - operating-points-v2
> + - "#power-domain-cells"
> + - nvmem-cells
> + - nvmem-cell-names
> +
> +additionalProperties: false
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,msm8998-cprh
> + then:
> + properties:
> + nvmem-cell-names:
> + items:
> + - const: cpr_speed_bin
> + - const: cpr_fuse_revision
> + - const: cpr0_quotient1
> + - const: cpr0_quotient2
> + - const: cpr0_quotient3
> + - const: cpr0_quotient4
> + - const: cpr0_quotient_offset2
> + - const: cpr0_quotient_offset3
> + - const: cpr0_quotient_offset4
> + - const: cpr0_init_voltage1
> + - const: cpr0_init_voltage2
> + - const: cpr0_init_voltage3
> + - const: cpr0_init_voltage4
> + - const: cpr0_ring_osc1
> + - const: cpr0_ring_osc2
> + - const: cpr0_ring_osc3
> + - const: cpr0_ring_osc4
> + - const: cpr1_quotient1
> + - const: cpr1_quotient2
> + - const: cpr1_quotient3
> + - const: cpr1_quotient4
> + - const: cpr1_quotient_offset2
> + - const: cpr1_quotient_offset3
> + - const: cpr1_quotient_offset4
> + - const: cpr1_init_voltage1
> + - const: cpr1_init_voltage2
> + - const: cpr1_init_voltage3
> + - const: cpr1_init_voltage4
> + - const: cpr1_ring_osc1
> + - const: cpr1_ring_osc2
> + - const: cpr1_ring_osc3
> + - const: cpr1_ring_osc4
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,gcc-msm8998.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + compatible = "qcom,kryo280";
> + device_type = "cpu";
> + reg = <0x0 0x0>;
> + operating-points-v2 = <&cpu0_opp_table>;
> + power-domains = <&apc_cprh 0>;
> + power-domain-names = "cprh";
The name should be local to the device, not based on the provider.
Do you really need a name here with only 1?
> + };
> +
> + cpu@100 {
> + compatible = "qcom,kryo280";
> + device_type = "cpu";
> + reg = <0x0 0x100>;
> + operating-points-v2 = <&cpu4_opp_table>;
> + power-domains = <&apc_cprh 1>;
> + power-domain-names = "cprh";
> + };
> + };
> +
> + cpu0_opp_table: opp-table-cpu0 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-1843200000 {
> + opp-hz = /bits/ 64 <1843200000>;
> + required-opps = <&cprh_opp3>;
> + };
> +
> + opp-1094400000 {
> + opp-hz = /bits/ 64 <1094400000>;
> + required-opps = <&cprh_opp2>;
> + };
> +
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + required-opps = <&cprh_opp1>;
> + };
> + };
> +
> + cpu4_opp_table: opp-table-cpu4 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-2208000000 {
> + opp-hz = /bits/ 64 <2208000000>;
> + required-opps = <&cprh_opp3>;
> + };
> +
> + opp-1113600000 {
> + opp-hz = /bits/ 64 <1113600000>;
> + required-opps = <&cprh_opp2>;
> + };
> +
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + required-opps = <&cprh_opp1>;
> + };
> + };
> +
> + cprh_opp_table: opp-table-cprh {
> + compatible = "operating-points-v2-qcom-level";
> +
> + cprh_opp1: opp-1 {
> + opp-level = <1>;
> + qcom,opp-fuse-level = <1>;
> + qcom,opp-cloop-vadj = <0>;
> + qcom,opp-oloop-vadj = <0>;
> + };
> +
> + cprh_opp2: opp-2 {
> + opp-level = <2>;
> + qcom,opp-fuse-level = <2>;
> + qcom,opp-cloop-vadj = <0>;
> + qcom,opp-oloop-vadj = <0>;
> + };
> +
> + cprh_opp3: opp-3 {
> + opp-level = <3>;
> + qcom,opp-fuse-level = <2 3>;
> + qcom,opp-cloop-vadj = <0>;
> + qcom,opp-oloop-vadj = <0>;
> + };
> + };
> +
> + apc_cprh: power-controller@179c8000 {
> + compatible = "qcom,msm8998-cprh", "qcom,cprh";
> + reg = <0x0179c8000 0x4000>, <0x0179c4000 0x4000>;
> + clocks = <&gcc GCC_HMSS_RBCPR_CLK>;
> +
> + operating-points-v2 = <&cprh_opp_table>;
> + #power-domain-cells = <1>;
> +
> + nvmem-cells = <&cpr_efuse_speedbin>,
> + <&cpr_fuse_revision>,
> + <&cpr_quot0_pwrcl>,
> + <&cpr_quot1_pwrcl>,
> + <&cpr_quot2_pwrcl>,
> + <&cpr_quot3_pwrcl>,
> + <&cpr_quot_offset1_pwrcl>,
> + <&cpr_quot_offset2_pwrcl>,
> + <&cpr_quot_offset3_pwrcl>,
> + <&cpr_init_voltage0_pwrcl>,
> + <&cpr_init_voltage1_pwrcl>,
> + <&cpr_init_voltage2_pwrcl>,
> + <&cpr_init_voltage3_pwrcl>,
> + <&cpr_ro_sel0_pwrcl>,
> + <&cpr_ro_sel1_pwrcl>,
> + <&cpr_ro_sel2_pwrcl>,
> + <&cpr_ro_sel3_pwrcl>,
> + <&cpr_quot0_perfcl>,
> + <&cpr_quot1_perfcl>,
> + <&cpr_quot2_perfcl>,
> + <&cpr_quot3_perfcl>,
> + <&cpr_quot_offset1_perfcl>,
> + <&cpr_quot_offset2_perfcl>,
> + <&cpr_quot_offset3_perfcl>,
> + <&cpr_init_voltage0_perfcl>,
> + <&cpr_init_voltage1_perfcl>,
> + <&cpr_init_voltage2_perfcl>,
> + <&cpr_init_voltage3_perfcl>,
> + <&cpr_ro_sel0_perfcl>,
> + <&cpr_ro_sel1_perfcl>,
> + <&cpr_ro_sel2_perfcl>,
> + <&cpr_ro_sel3_perfcl>;
> + nvmem-cell-names = "cpr_speed_bin",
> + "cpr_fuse_revision",
> + "cpr0_quotient1",
> + "cpr0_quotient2",
> + "cpr0_quotient3",
> + "cpr0_quotient4",
> + "cpr0_quotient_offset2",
> + "cpr0_quotient_offset3",
> + "cpr0_quotient_offset4",
> + "cpr0_init_voltage1",
> + "cpr0_init_voltage2",
> + "cpr0_init_voltage3",
> + "cpr0_init_voltage4",
> + "cpr0_ring_osc1",
> + "cpr0_ring_osc2",
> + "cpr0_ring_osc3",
> + "cpr0_ring_osc4",
> + "cpr1_quotient1",
> + "cpr1_quotient2",
> + "cpr1_quotient3",
> + "cpr1_quotient4",
> + "cpr1_quotient_offset2",
> + "cpr1_quotient_offset3",
> + "cpr1_quotient_offset4",
> + "cpr1_init_voltage1",
> + "cpr1_init_voltage2",
> + "cpr1_init_voltage3",
> + "cpr1_init_voltage4",
> + "cpr1_ring_osc1",
> + "cpr1_ring_osc2",
> + "cpr1_ring_osc3",
> + "cpr1_ring_osc4";
> + };
> +...
>
> --
> 2.41.0
>
On 28.06.2023 18:03, Rob Herring wrote:
> On Wed, Jun 28, 2023 at 04:00:43PM +0200, Konrad Dybcio wrote:
>> From: AngeloGioacchino Del Regno <[email protected]>
>>
>> Add the bindings for the CPR3 driver to the documentation.
>
> Bindings are for h/w, not drivers.
This shows how ancient this patch is, from before it was
common knowledge ;)
>
>>
>> Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
>> [Konrad: Make binding check pass; update AGdR's email]
>> Signed-off-by: Konrad Dybcio <[email protected]>
>> ---
>> .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml | 289 +++++++++++++++++++++
>> 1 file changed, 289 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
>> new file mode 100644
>> index 000000000000..46b94dffaf85
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
>> @@ -0,0 +1,289 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,cpr3.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>
> Drop quotes
Ack
>
>> +
>> +title: Qualcomm Core Power Reduction v3/v4/Hardened (CPR3, CPR4, CPRh)
>> +
>> +description:
>> + CPR (Core Power Reduction) is a technology to reduce core power of a CPU
>> + (or another device). Each OPP of a device corresponds to a "corner" that
>> + has a range of valid voltages for a particular frequency.
>> + The CPR monitors dynamic factors such as temperature, etc. and suggests
>> + or (in the CPR-hardened case) applies voltage adjustments to save power
>> + and meet silicon characteristic requirements for a given chip unit.
>> +
>> +maintainers:
>> + - AngeloGioacchino Del Regno <[email protected]>
>> +
>> +properties:
>> + compatible:
>> + oneOf:
>> + - description: CPRv3 controller
>> + items:
>> + - const: qcom,cpr3
>> + - description: CPRv4 controller
>> + items:
>> + - const: qcom,cpr4
>> + - description: CPRv4-Hardened controller
>> + items:
>> + - enum:
>> + - qcom,msm8998-cprh
>> + - qcom,sdm630-cprh
>> + - const: qcom,cprh
>> +
>> + reg:
>> + description: Base address and size of the CPR controller(s)
>> + maxItems: 2
>
> What is each entry?
I thought the description was clear enough, but I'll add items:.
>
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + clocks:
>> + items:
>> + - description: CPR reference clock
>> +
>> + vdd-supply:
>> + description: Autonomous Phase Control (APC) or other power supply
>> +
>> + '#power-domain-cells':
>> + const: 1
>> +
>> + qcom,acc:
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description: phandle to syscon for writing ACC settings
>> +
>> + nvmem-cells:
>> + description: Cells containing the fuse corners and revision data
>> + maxItems: 32
>> +
>> + nvmem-cell-names:
>> + maxItems: 32
>> +
>> + operating-points-v2: true
>> +
>> + power-domains: true
>
> Need to define how many.
Ack
>
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - clocks
>> + - operating-points-v2
>> + - "#power-domain-cells"
>> + - nvmem-cells
>> + - nvmem-cell-names
>> +
>> +additionalProperties: false
>> +
>> +allOf:
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + enum:
>> + - qcom,msm8998-cprh
>> + then:
>> + properties:
>> + nvmem-cell-names:
>> + items:
>> + - const: cpr_speed_bin
>> + - const: cpr_fuse_revision
>> + - const: cpr0_quotient1
>> + - const: cpr0_quotient2
>> + - const: cpr0_quotient3
>> + - const: cpr0_quotient4
>> + - const: cpr0_quotient_offset2
>> + - const: cpr0_quotient_offset3
>> + - const: cpr0_quotient_offset4
>> + - const: cpr0_init_voltage1
>> + - const: cpr0_init_voltage2
>> + - const: cpr0_init_voltage3
>> + - const: cpr0_init_voltage4
>> + - const: cpr0_ring_osc1
>> + - const: cpr0_ring_osc2
>> + - const: cpr0_ring_osc3
>> + - const: cpr0_ring_osc4
>> + - const: cpr1_quotient1
>> + - const: cpr1_quotient2
>> + - const: cpr1_quotient3
>> + - const: cpr1_quotient4
>> + - const: cpr1_quotient_offset2
>> + - const: cpr1_quotient_offset3
>> + - const: cpr1_quotient_offset4
>> + - const: cpr1_init_voltage1
>> + - const: cpr1_init_voltage2
>> + - const: cpr1_init_voltage3
>> + - const: cpr1_init_voltage4
>> + - const: cpr1_ring_osc1
>> + - const: cpr1_ring_osc2
>> + - const: cpr1_ring_osc3
>> + - const: cpr1_ring_osc4
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/clock/qcom,gcc-msm8998.h>
>> + #include <dt-bindings/interrupt-controller/irq.h>
>> +
>> + cpus {
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
>> + cpu@0 {
>> + compatible = "qcom,kryo280";
>> + device_type = "cpu";
>> + reg = <0x0 0x0>;
>> + operating-points-v2 = <&cpu0_opp_table>;
>> + power-domains = <&apc_cprh 0>;
>> + power-domain-names = "cprh";
>
> The name should be local to the device, not based on the provider.
>
> Do you really need a name here with only 1?
Yes, cpufreq drivers need to dance around the genpd and OPP frameworks,
which requires a name.
Konrad
>
>> + };
>> +
>> + cpu@100 {
>> + compatible = "qcom,kryo280";
>> + device_type = "cpu";
>> + reg = <0x0 0x100>;
>> + operating-points-v2 = <&cpu4_opp_table>;
>> + power-domains = <&apc_cprh 1>;
>> + power-domain-names = "cprh";
>> + };
>> + };
>> +
>> + cpu0_opp_table: opp-table-cpu0 {
>> + compatible = "operating-points-v2";
>> + opp-shared;
>> +
>> + opp-1843200000 {
>> + opp-hz = /bits/ 64 <1843200000>;
>> + required-opps = <&cprh_opp3>;
>> + };
>> +
>> + opp-1094400000 {
>> + opp-hz = /bits/ 64 <1094400000>;
>> + required-opps = <&cprh_opp2>;
>> + };
>> +
>> + opp-300000000 {
>> + opp-hz = /bits/ 64 <300000000>;
>> + required-opps = <&cprh_opp1>;
>> + };
>> + };
>> +
>> + cpu4_opp_table: opp-table-cpu4 {
>> + compatible = "operating-points-v2";
>> + opp-shared;
>> +
>> + opp-2208000000 {
>> + opp-hz = /bits/ 64 <2208000000>;
>> + required-opps = <&cprh_opp3>;
>> + };
>> +
>> + opp-1113600000 {
>> + opp-hz = /bits/ 64 <1113600000>;
>> + required-opps = <&cprh_opp2>;
>> + };
>> +
>> + opp-300000000 {
>> + opp-hz = /bits/ 64 <300000000>;
>> + required-opps = <&cprh_opp1>;
>> + };
>> + };
>> +
>> + cprh_opp_table: opp-table-cprh {
>> + compatible = "operating-points-v2-qcom-level";
>> +
>> + cprh_opp1: opp-1 {
>> + opp-level = <1>;
>> + qcom,opp-fuse-level = <1>;
>> + qcom,opp-cloop-vadj = <0>;
>> + qcom,opp-oloop-vadj = <0>;
>> + };
>> +
>> + cprh_opp2: opp-2 {
>> + opp-level = <2>;
>> + qcom,opp-fuse-level = <2>;
>> + qcom,opp-cloop-vadj = <0>;
>> + qcom,opp-oloop-vadj = <0>;
>> + };
>> +
>> + cprh_opp3: opp-3 {
>> + opp-level = <3>;
>> + qcom,opp-fuse-level = <2 3>;
>> + qcom,opp-cloop-vadj = <0>;
>> + qcom,opp-oloop-vadj = <0>;
>> + };
>> + };
>> +
>> + apc_cprh: power-controller@179c8000 {
>> + compatible = "qcom,msm8998-cprh", "qcom,cprh";
>> + reg = <0x0179c8000 0x4000>, <0x0179c4000 0x4000>;
>> + clocks = <&gcc GCC_HMSS_RBCPR_CLK>;
>> +
>> + operating-points-v2 = <&cprh_opp_table>;
>> + #power-domain-cells = <1>;
>> +
>> + nvmem-cells = <&cpr_efuse_speedbin>,
>> + <&cpr_fuse_revision>,
>> + <&cpr_quot0_pwrcl>,
>> + <&cpr_quot1_pwrcl>,
>> + <&cpr_quot2_pwrcl>,
>> + <&cpr_quot3_pwrcl>,
>> + <&cpr_quot_offset1_pwrcl>,
>> + <&cpr_quot_offset2_pwrcl>,
>> + <&cpr_quot_offset3_pwrcl>,
>> + <&cpr_init_voltage0_pwrcl>,
>> + <&cpr_init_voltage1_pwrcl>,
>> + <&cpr_init_voltage2_pwrcl>,
>> + <&cpr_init_voltage3_pwrcl>,
>> + <&cpr_ro_sel0_pwrcl>,
>> + <&cpr_ro_sel1_pwrcl>,
>> + <&cpr_ro_sel2_pwrcl>,
>> + <&cpr_ro_sel3_pwrcl>,
>> + <&cpr_quot0_perfcl>,
>> + <&cpr_quot1_perfcl>,
>> + <&cpr_quot2_perfcl>,
>> + <&cpr_quot3_perfcl>,
>> + <&cpr_quot_offset1_perfcl>,
>> + <&cpr_quot_offset2_perfcl>,
>> + <&cpr_quot_offset3_perfcl>,
>> + <&cpr_init_voltage0_perfcl>,
>> + <&cpr_init_voltage1_perfcl>,
>> + <&cpr_init_voltage2_perfcl>,
>> + <&cpr_init_voltage3_perfcl>,
>> + <&cpr_ro_sel0_perfcl>,
>> + <&cpr_ro_sel1_perfcl>,
>> + <&cpr_ro_sel2_perfcl>,
>> + <&cpr_ro_sel3_perfcl>;
>> + nvmem-cell-names = "cpr_speed_bin",
>> + "cpr_fuse_revision",
>> + "cpr0_quotient1",
>> + "cpr0_quotient2",
>> + "cpr0_quotient3",
>> + "cpr0_quotient4",
>> + "cpr0_quotient_offset2",
>> + "cpr0_quotient_offset3",
>> + "cpr0_quotient_offset4",
>> + "cpr0_init_voltage1",
>> + "cpr0_init_voltage2",
>> + "cpr0_init_voltage3",
>> + "cpr0_init_voltage4",
>> + "cpr0_ring_osc1",
>> + "cpr0_ring_osc2",
>> + "cpr0_ring_osc3",
>> + "cpr0_ring_osc4",
>> + "cpr1_quotient1",
>> + "cpr1_quotient2",
>> + "cpr1_quotient3",
>> + "cpr1_quotient4",
>> + "cpr1_quotient_offset2",
>> + "cpr1_quotient_offset3",
>> + "cpr1_quotient_offset4",
>> + "cpr1_init_voltage1",
>> + "cpr1_init_voltage2",
>> + "cpr1_init_voltage3",
>> + "cpr1_init_voltage4",
>> + "cpr1_ring_osc1",
>> + "cpr1_ring_osc2",
>> + "cpr1_ring_osc3",
>> + "cpr1_ring_osc4";
>> + };
>> +...
>>
>> --
>> 2.41.0
>>
On 28-06-23, 09:56, Rob Herring wrote:
> On Wed, Jun 28, 2023 at 04:00:40PM +0200, Konrad Dybcio wrote:
> > From: AngeloGioacchino Del Regno <[email protected]>
> >
> > Add the MSM8998 to the blacklist since the CPU scaling is handled
>
> s/blacklist/denylist/ or s/blacklist/blocklist/
They are already named allowlist and blocklist.
> > @@ -143,6 +143,7 @@ static const struct of_device_id blocklist[] __initconst = {
--
viresh
On 28/06/2023 16:00, Konrad Dybcio wrote:
> From: AngeloGioacchino Del Regno <[email protected]>
>
> Add the MSM8998 to the blacklist since the CPU scaling is handled
It is "blocklist", not "blacklist" (both in commit msg and subject).
Best regards,
Krzysztof
On 03/07/2023 06:17, Viresh Kumar wrote:
> On 28-06-23, 09:56, Rob Herring wrote:
>> On Wed, Jun 28, 2023 at 04:00:40PM +0200, Konrad Dybcio wrote:
>>> From: AngeloGioacchino Del Regno <[email protected]>
>>>
>>> Add the MSM8998 to the blacklist since the CPU scaling is handled
>>
>> s/blacklist/denylist/ or s/blacklist/blocklist/
>
> They are already named allowlist and blocklist.
This was about commit msg and subject. They are not named like this.
Best regards,
Krzysztof
On 04-07-23, 10:07, Krzysztof Kozlowski wrote:
> On 03/07/2023 06:17, Viresh Kumar wrote:
> > On 28-06-23, 09:56, Rob Herring wrote:
> >> On Wed, Jun 28, 2023 at 04:00:40PM +0200, Konrad Dybcio wrote:
> >>> From: AngeloGioacchino Del Regno <[email protected]>
> >>>
> >>> Add the MSM8998 to the blacklist since the CPU scaling is handled
> >>
> >> s/blacklist/denylist/ or s/blacklist/blocklist/
> >
> > They are already named allowlist and blocklist.
>
> This was about commit msg and subject. They are not named like this.
Yeah, I was just saying we have proper names in the code and they must be used
here in commit. Sorry for not being clear earlier :)
--
viresh
Il 28/06/23 16:00, Konrad Dybcio ha scritto:
> 32 bits is not enough for over-2.changeGHz frequencies. Move all variables
> that operate on Hz to u64 to avoid overflows.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Il 28/06/23 16:00, Konrad Dybcio ha scritto:
> CPR3 and newer can be fed per-OPP voltage adjustment values for both
> open- and closed-loop paths to make better decisions about settling
> on the final voltage offset target. Document these properties.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>