The following changes since commit 2ccdd1b13c591d306f0401d98dedc4bdcd02b421:
Linux 6.5-rc6 (2023-08-13 11:29:55 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git tags/i2c-for-6.6-rc1
for you to fetch changes up to 0ab4bcf0e9471c1a3f5e4721ee486f6ed1a76bac:
i2c: at91: Use dev_err_probe() instead of dev_err() (2023-08-30 21:19:55 +0200)
----------------------------------------------------------------
I2C has mainly cleanups this time and a few driver improvements. Because
a lot of developers were on holidays (including myself) it was a good
timing to apply lots of cleanups which would normally cause merge
conflicts with other floating patches. Extra thanks go to Andi Shyti who
backed me up when I was on a four week hiatus. This is also the reason
that some patches were commited later than ideal.
----------------------------------------------------------------
Arnd Bergmann (1):
virtio: Remove PM #ifdef guards to fix i2c driver
Carlos Song (1):
i2c: imx-lpi2c: directly return ISR when detect a NACK
Dan Carpenter (1):
i2c: imx: Clean up a call to request_irq()
Harry Geyer (1):
i2c: tiny-usb: check usb base class before assuming the interface on device is for this driver
Harshit Mogalapalli (1):
i2c: qcom-cci: Fix error checking in cci_probe()
Ilpo Järvinen (3):
i2c: sis5595: Do PCI error checks on own line
i2c: nforce2: Do PCI error check on own line
I2C: ali15x3: Do PCI error checks on own line
Jinjie Ruan (1):
i2c: Make return value check more accurate and explicit for devm_pinctrl_get()
Krzysztof Kozlowski (2):
dt-bindings: i2c: nxp,pca9541: convert to DT schema
dt-bindings: i2c: arb-gpio-challange: convert to DT schema
Liao Chang (9):
i2c: bcm2835: Use dev_err_probe in probe function
i2c: mlxbf: Use dev_err_probe in probe function
i2c: xlp9xx: Use dev_err_probe in probe function
i2c: hisi: Use dev_err_probe in probe function
i2c: qcom-cci: Use dev_err_probe in probe function
i2c: pxa: Use dev_err_probe in probe function
i2c: dln2: Use dev_err_probe in probe function
i2c: imx-lpi2c: Use dev_err_probe in probe function
i2c: synquacer: Use dev_err_probe in probe function
Michal Simek (1):
dt-bindings: i2c: cadence: Describe power-domains property
Patrick Rudolph (4):
dt-bindings: i2c: pca954x: Correct interrupt support
dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
i2c: muxes: pca954x: Add MAX735x/MAX736x support
i2c: muxes: pca954x: Add regulator support
Paul Cercueil (22):
i2c: au1550: Remove #ifdef guards for PM related functions
i2c: iproc: Remove #ifdef guards for PM related functions
i2c: brcmstb: Remove #ifdef guards for PM related functions
i2c: davinci: Remove #ifdef guards for PM related functions
i2c: designware: Remove #ifdef guards for PM related functions
i2c: exynos5: Remove #ifdef guards for PM related functions
i2c: hix5hd2: Remove #ifdef guards for PM related functions
i2c: i801: Remove #ifdef guards for PM related functions
i2c: img-scb: Remove #ifdef guards for PM related functions
i2c: kempld: Convert to use regular device PM
i2c: lpc2k: Remove #ifdef guards for PM related functions
i2c: mt65xx: Remove #ifdef guards for PM related functions
i2c: nomadik: Remove #ifdef guards for PM related functions
i2c: ocores: Remove #ifdef guards for PM related functions
i2c: pnx: Remove #ifdef guards for PM related functions
i2c: pxa: Remove #ifdef guards for PM related functions
i2c: qup: Remove #ifdef guards for PM related functions
i2c: rcar: Remove #ifdef guards for PM related functions
i2c: s3c2410: Remove #ifdef guards for PM related functions
i2c: sh-mobile: Remove #ifdef guards for PM related functions
i2c: virtio: Remove #ifdef guards for PM related functions
i2c: mux: pca954x: Remove #ifdef guards for PM related functions
Rob Herring (1):
I2C: Explicitly include correct DT includes
Ruan Jinjie (3):
i2c: s3c2410: Remove redundant dev_err()
i2c: stm32: Do not check for 0 return after calling platform_get_irq()
i2c: mux: ltc4306: Remove an unnecessary ternary operator
Vadim Pasternak (2):
i2c: mlxcpld: Allow driver to run on ARM64 architecture
i2c: mlxcpld: Add support for extended transaction length
Wolfram Sang (1):
Merge remote-tracking branch 'andi/i2c/andi-for-next' into i2c/for-mergewindow
Yangtao Li (11):
i2c: at91: Use devm_platform_get_and_ioremap_resource()
i2c: iproc: Convert to devm_platform_ioremap_resource()
i2c: brcmstb: Convert to devm_platform_ioremap_resource()
i2c: mlxbf: Use devm_platform_get_and_ioremap_resource()
i2c: stm32f4: Use devm_platform_get_and_ioremap_resource()
i2c: qcom-geni: Convert to devm_platform_ioremap_resource()
i2c: st: Use devm_platform_get_and_ioremap_resource()
i2c: sh_mobile: Use devm_platform_get_and_ioremap_resource()
i2c: s3c2410: Use devm_platform_get_and_ioremap_resource()
i2c: pxa: Use devm_platform_get_and_ioremap_resource()
i2c: pnx: Use devm_platform_get_and_ioremap_resource()
Yann Sionneau (2):
i2c: designware: Add support for recovery when GPIO need pinctrl
i2c: at91: Use dev_err_probe() instead of dev_err()
Zhu Wang (1):
i2c: remove redundant dev_err_probe()
with much appreciated quality assurance from
----------------------------------------------------------------
Kamal Dasu (1):
(Rev.) i2c: brcmstb: Convert to devm_platform_ioremap_resource()
Andi Shyti (33):
(Rev.) i2c: at91: Use dev_err_probe() instead of dev_err()
(Rev.) I2C: ali15x3: Do PCI error checks on own line
(Rev.) i2c: Make return value check more accurate and explicit for devm_pinctrl_get()
(Rev.) i2c: designware: Add support for recovery when GPIO need pinctrl
(Rev.) i2c: nforce2: Do PCI error check on own line
(Rev.) i2c: sis5595: Do PCI error checks on own line
(Rev.) i2c: qcom-cci: Fix error checking in cci_probe()
(Rev.) i2c: muxes: pca954x: Add regulator support
(Rev.) i2c: muxes: pca954x: Add MAX735x/MAX736x support
(Rev.) i2c: pnx: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: pxa: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: s3c2410: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: sh_mobile: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: st: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: qcom-geni: Convert to devm_platform_ioremap_resource()
(Rev.) i2c: stm32f4: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: mlxbf: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: brcmstb: Convert to devm_platform_ioremap_resource()
(Rev.) i2c: iproc: Convert to devm_platform_ioremap_resource()
(Rev.) i2c: at91: Use devm_platform_get_and_ioremap_resource()
(Rev.) I2C: Explicitly include correct DT includes
(Rev.) i2c: tiny-usb: check usb base class before assuming the interface on device is for this driver
(Rev.) i2c: synquacer: Use dev_err_probe in probe function
(Rev.) i2c: imx-lpi2c: Use dev_err_probe in probe function
(Rev.) i2c: dln2: Use dev_err_probe in probe function
(Rev.) i2c: pxa: Use dev_err_probe in probe function
(Rev.) i2c: qcom-cci: Use dev_err_probe in probe function
(Rev.) i2c: xlp9xx: Use dev_err_probe in probe function
(Rev.) i2c: mlxbf: Use dev_err_probe in probe function
(Rev.) i2c: stm32: Do not check for 0 return after calling platform_get_irq()
(Rev.) virtio: Remove PM #ifdef guards to fix i2c driver
(Rev.) i2c: s3c2410: Remove redundant dev_err()
(Rev.) i2c: imx-lpi2c: directly return ISR when detect a NACK
Andy Shevchenko (2):
(Rev.) i2c: designware: Add support for recovery when GPIO need pinctrl
(Rev.) i2c: designware: Remove #ifdef guards for PM related functions
Bartosz Golaszewski (1):
(Rev.) i2c: davinci: Remove #ifdef guards for PM related functions
Bryan O'Donoghue (1):
(Rev.) i2c: qcom-cci: Fix error checking in cci_probe()
Conor Dooley (2):
(Rev.) dt-bindings: i2c: nxp,pca9541: convert to DT schema
(Rev.) i2c: remove redundant dev_err_probe()
Florian Fainelli (4):
(Rev.) i2c: brcmstb: Convert to devm_platform_ioremap_resource()
(Rev.) i2c: bcm2835: Use dev_err_probe in probe function
(Rev.) i2c: brcmstb: Remove #ifdef guards for PM related functions
(Rev.) i2c: iproc: Remove #ifdef guards for PM related functions
Geert Uytterhoeven (3):
(Rev.) i2c: sh_mobile: Use devm_platform_get_and_ioremap_resource()
(Rev.) i2c: sh-mobile: Remove #ifdef guards for PM related functions
(Rev.) i2c: rcar: Remove #ifdef guards for PM related functions
Jonathan Cameron (20):
(Rev.) i2c: mux: pca954x: Remove #ifdef guards for PM related functions
(Rev.) i2c: virtio: Remove #ifdef guards for PM related functions
(Rev.) i2c: sh-mobile: Remove #ifdef guards for PM related functions
(Rev.) i2c: s3c2410: Remove #ifdef guards for PM related functions
(Rev.) i2c: rcar: Remove #ifdef guards for PM related functions
(Rev.) i2c: qup: Remove #ifdef guards for PM related functions
(Rev.) i2c: pxa: Remove #ifdef guards for PM related functions
(Rev.) i2c: pnx: Remove #ifdef guards for PM related functions
(Rev.) i2c: ocores: Remove #ifdef guards for PM related functions
(Rev.) i2c: nomadik: Remove #ifdef guards for PM related functions
(Rev.) i2c: mt65xx: Remove #ifdef guards for PM related functions
(Rev.) i2c: lpc2k: Remove #ifdef guards for PM related functions
(Rev.) i2c: i801: Remove #ifdef guards for PM related functions
(Rev.) i2c: hix5hd2: Remove #ifdef guards for PM related functions
(Rev.) i2c: exynos5: Remove #ifdef guards for PM related functions
(Rev.) i2c: designware: Remove #ifdef guards for PM related functions
(Rev.) i2c: davinci: Remove #ifdef guards for PM related functions
(Rev.) i2c: brcmstb: Remove #ifdef guards for PM related functions
(Rev.) i2c: iproc: Remove #ifdef guards for PM related functions
(Rev.) i2c: au1550: Remove #ifdef guards for PM related functions
Krzysztof Kozlowski (2):
(Rev.) dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
(Rev.) dt-bindings: i2c: pca954x: Correct interrupt support
Linus Walleij (2):
(Rev.) i2c: Make return value check more accurate and explicit for devm_pinctrl_get()
(Rev.) i2c: nomadik: Remove #ifdef guards for PM related functions
Michael Shych (2):
(Rev.) i2c: mlxcpld: Add support for extended transaction length
(Rev.) i2c: mlxcpld: Allow driver to run on ARM64 architecture
Paul Cercueil (1):
(Rev.) virtio: Remove PM #ifdef guards to fix i2c driver
Uwe Kleine-König (1):
(Rev.) i2c: imx: Clean up a call to request_irq()
Yicong Yang (1):
(Rev.) i2c: hisi: Use dev_err_probe in probe function
.../devicetree/bindings/i2c/cdns,i2c-r1p10.yaml | 3 +
.../bindings/i2c/i2c-arb-gpio-challenge.txt | 82 -------------
.../bindings/i2c/i2c-arb-gpio-challenge.yaml | 135 +++++++++++++++++++++
Documentation/devicetree/bindings/i2c/i2c-arb.txt | 35 ------
.../devicetree/bindings/i2c/i2c-mux-pca954x.yaml | 46 ++++++-
.../devicetree/bindings/i2c/nxp,pca9541.txt | 29 -----
.../devicetree/bindings/i2c/nxp,pca9541.yaml | 56 +++++++++
drivers/i2c/busses/Kconfig | 2 +-
drivers/i2c/busses/i2c-ali15x3.c | 11 +-
drivers/i2c/busses/i2c-at91-core.c | 18 +--
drivers/i2c/busses/i2c-at91-master.c | 7 +-
drivers/i2c/busses/i2c-au1550.c | 15 +--
drivers/i2c/busses/i2c-bcm-iproc.c | 20 +--
drivers/i2c/busses/i2c-bcm2835.c | 16 ++-
drivers/i2c/busses/i2c-brcmstb.c | 27 ++---
drivers/i2c/busses/i2c-cpm.c | 4 +-
drivers/i2c/busses/i2c-davinci.c | 16 +--
drivers/i2c/busses/i2c-designware-master.c | 12 ++
drivers/i2c/busses/i2c-designware-platdrv.c | 22 +---
drivers/i2c/busses/i2c-dln2.c | 6 +-
drivers/i2c/busses/i2c-emev2.c | 2 +-
drivers/i2c/busses/i2c-exynos5.c | 12 +-
drivers/i2c/busses/i2c-gxp.c | 3 +-
drivers/i2c/busses/i2c-hisi.c | 12 +-
drivers/i2c/busses/i2c-hix5hd2.c | 10 +-
drivers/i2c/busses/i2c-i801.c | 6 +-
drivers/i2c/busses/i2c-ibm_iic.c | 3 +-
drivers/i2c/busses/i2c-img-scb.c | 10 +-
drivers/i2c/busses/i2c-imx-lpi2c.c | 23 ++--
drivers/i2c/busses/i2c-imx.c | 10 +-
drivers/i2c/busses/i2c-jz4780.c | 2 +-
drivers/i2c/busses/i2c-kempld.c | 19 ++-
drivers/i2c/busses/i2c-lpc2k.c | 9 +-
drivers/i2c/busses/i2c-meson.c | 1 -
drivers/i2c/busses/i2c-microchip-corei2c.c | 5 +-
drivers/i2c/busses/i2c-mlxbf.c | 60 +++------
drivers/i2c/busses/i2c-mlxcpld.c | 10 ++
drivers/i2c/busses/i2c-mpc.c | 3 +-
drivers/i2c/busses/i2c-mt65xx.c | 12 +-
drivers/i2c/busses/i2c-mt7621.c | 3 +-
drivers/i2c/busses/i2c-mxs.c | 1 -
drivers/i2c/busses/i2c-nforce2.c | 4 +-
drivers/i2c/busses/i2c-nomadik.c | 12 +-
drivers/i2c/busses/i2c-npcm7xx.c | 1 -
drivers/i2c/busses/i2c-ocores.c | 10 +-
drivers/i2c/busses/i2c-owl.c | 3 +-
drivers/i2c/busses/i2c-pca-platform.c | 1 -
drivers/i2c/busses/i2c-pnx.c | 15 +--
drivers/i2c/busses/i2c-pxa-pci.c | 1 -
drivers/i2c/busses/i2c-pxa.c | 20 +--
drivers/i2c/busses/i2c-qcom-cci.c | 8 +-
drivers/i2c/busses/i2c-qcom-geni.c | 4 +-
drivers/i2c/busses/i2c-qup.c | 16 +--
drivers/i2c/busses/i2c-rcar.c | 12 +-
drivers/i2c/busses/i2c-riic.c | 1 -
drivers/i2c/busses/i2c-s3c2410.c | 20 +--
drivers/i2c/busses/i2c-sh_mobile.c | 22 +---
drivers/i2c/busses/i2c-sis5595.c | 20 +--
drivers/i2c/busses/i2c-sprd.c | 1 -
drivers/i2c/busses/i2c-st.c | 3 +-
drivers/i2c/busses/i2c-stm32f4.c | 3 +-
drivers/i2c/busses/i2c-stm32f7.c | 8 +-
drivers/i2c/busses/i2c-synquacer.c | 28 ++---
drivers/i2c/busses/i2c-tegra-bpmp.c | 2 +-
drivers/i2c/busses/i2c-tegra.c | 2 +-
drivers/i2c/busses/i2c-tiny-usb.c | 4 +
drivers/i2c/busses/i2c-virtio.c | 8 +-
drivers/i2c/busses/i2c-xlp9xx.c | 6 +-
drivers/i2c/muxes/Kconfig | 6 +-
drivers/i2c/muxes/i2c-mux-gpmux.c | 2 +-
drivers/i2c/muxes/i2c-mux-ltc4306.c | 3 +-
drivers/i2c/muxes/i2c-mux-pca954x.c | 101 +++++++++++++--
include/linux/virtio.h | 2 -
73 files changed, 562 insertions(+), 565 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.yaml
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-arb.txt
delete mode 100644 Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
create mode 100644 Documentation/devicetree/bindings/i2c/nxp,pca9541.yaml
The pull request you sent on Mon, 4 Sep 2023 13:34:43 +0200:
> git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git tags/i2c-for-6.6-rc1
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/e3b85b07650c0c9d4d2fab82a21fa3dfbfbb9b63
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/prtracker.html