Dual microwave down converter module with input RF and LO frequency
ranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to
8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifier
for each down conversion path.
Signed-off-by: Kim Seer Paller <[email protected]>
---
V1 -> V4: No changes.
MAINTAINERS | 1 +
drivers/iio/frequency/Kconfig | 10 +
drivers/iio/frequency/Makefile | 1 +
drivers/iio/frequency/admfm2000.c | 309 ++++++++++++++++++++++++++++++
4 files changed, 321 insertions(+)
create mode 100644 drivers/iio/frequency/admfm2000.c
diff --git a/MAINTAINERS b/MAINTAINERS
index f1692ec68..d8630e490 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1253,6 +1253,7 @@ L: [email protected]
S: Supported
W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml
+F: drivers/iio/frequency/admfm2000.c
ANALOG DEVICES INC ADMV1013 DRIVER
M: Antoniu Miclaus <[email protected]>
diff --git a/drivers/iio/frequency/Kconfig b/drivers/iio/frequency/Kconfig
index 9e85dfa58..c455be7d4 100644
--- a/drivers/iio/frequency/Kconfig
+++ b/drivers/iio/frequency/Kconfig
@@ -60,6 +60,16 @@ config ADF4377
To compile this driver as a module, choose M here: the
module will be called adf4377.
+config ADMFM2000
+ tristate "Analog Devices ADMFM2000 Dual Microwave Down Converter"
+ depends on GPIOLIB
+ help
+ Say yes here to build support for Analog Devices ADMFM2000 Dual
+ Microwave Down Converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called admfm2000.
+
config ADMV1013
tristate "Analog Devices ADMV1013 Microwave Upconverter"
depends on SPI && COMMON_CLK
diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile
index b616c29b4..70d0e0b70 100644
--- a/drivers/iio/frequency/Makefile
+++ b/drivers/iio/frequency/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_AD9523) += ad9523.o
obj-$(CONFIG_ADF4350) += adf4350.o
obj-$(CONFIG_ADF4371) += adf4371.o
obj-$(CONFIG_ADF4377) += adf4377.o
+obj-$(CONFIG_ADMFM2000) += admfm2000.o
obj-$(CONFIG_ADMV1013) += admv1013.o
obj-$(CONFIG_ADMV1014) += admv1014.o
obj-$(CONFIG_ADMV4420) += admv4420.o
diff --git a/drivers/iio/frequency/admfm2000.c b/drivers/iio/frequency/admfm2000.c
new file mode 100644
index 000000000..e0b5edce7
--- /dev/null
+++ b/drivers/iio/frequency/admfm2000.c
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADMFM2000 Dual Microwave Down Converter
+ *
+ * Copyright 2023 Analog Devices Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define ADMFM2000_MIXER_MODE 0
+#define ADMFM2000_DIRECT_IF_MODE 1
+#define ADMF20000_DSA_GPIOS 5
+#define ADMF20000_MODE_GPIOS 2
+#define ADMF20000_MAX_GAIN 0
+#define ADMF20000_MIN_GAIN -31000
+#define ADMF20000_DEFAULT_GAIN -0x20
+
+struct admfm2000_state {
+ struct mutex lock; /* protect sensor state */
+ struct gpio_descs *sw_ch[2];
+ struct gpio_descs *dsa_gpios[2];
+ u32 gain[2];
+};
+
+static int admfm2000_mode(struct iio_dev *indio_dev, u32 reg, u32 mode)
+{
+ struct admfm2000_state *st = iio_priv(indio_dev);
+ DECLARE_BITMAP(values, 2);
+
+ switch (mode) {
+ case ADMFM2000_MIXER_MODE:
+ values[0] = (reg == 0) ? 1 : 2;
+ gpiod_set_array_value_cansleep(st->sw_ch[reg]->ndescs,
+ st->sw_ch[reg]->desc,
+ NULL, values);
+ break;
+ case ADMFM2000_DIRECT_IF_MODE:
+ values[0] = (reg == 0) ? 2 : 1;
+ gpiod_set_array_value_cansleep(st->sw_ch[reg]->ndescs,
+ st->sw_ch[reg]->desc,
+ NULL, values);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int admfm2000_attenuation(struct iio_dev *indio_dev, u32 chan,
+ u32 value)
+{
+ struct admfm2000_state *st = iio_priv(indio_dev);
+ DECLARE_BITMAP(values, BITS_PER_TYPE(value));
+
+ values[0] = value;
+
+ gpiod_set_array_value_cansleep(st->dsa_gpios[chan]->ndescs,
+ st->dsa_gpios[chan]->desc,
+ NULL, values);
+ return 0;
+}
+
+static int admfm2000_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct admfm2000_state *st = iio_priv(indio_dev);
+ int gain;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ mutex_lock(&st->lock);
+ gain = ~(st->gain[chan->channel]) * -1000;
+ *val = gain / 1000;
+ *val2 = (gain % 1000) * 1000;
+ mutex_unlock(&st->lock);
+
+ return IIO_VAL_INT_PLUS_MICRO_DB;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int admfm2000_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ struct admfm2000_state *st = iio_priv(indio_dev);
+ int gain, ret;
+
+ if (val < 0)
+ gain = (val * 1000) - (val2 / 1000);
+ else
+ gain = (val * 1000) + (val2 / 1000);
+
+ if (gain > ADMF20000_MAX_GAIN || gain < ADMF20000_MIN_GAIN)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ mutex_lock(&st->lock);
+ st->gain[chan->channel] = ~((abs(gain) / 1000) & 0x1F);
+
+ ret = admfm2000_attenuation(indio_dev, chan->channel,
+ st->gain[chan->channel]);
+
+ mutex_unlock(&st->lock);
+ if (ret)
+ return ret;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int admfm2000_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ return IIO_VAL_INT_PLUS_MICRO_DB;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info admfm2000_info = {
+ .read_raw = &admfm2000_read_raw,
+ .write_raw = &admfm2000_write_raw,
+ .write_raw_get_fmt = &admfm2000_write_raw_get_fmt,
+};
+
+#define ADMFM2000_CHAN(_channel) { \
+ .type = IIO_VOLTAGE, \
+ .output = 1, \
+ .indexed = 1, \
+ .channel = _channel, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
+}
+
+static const struct iio_chan_spec admfm2000_channels[] = {
+ ADMFM2000_CHAN(0),
+ ADMFM2000_CHAN(1),
+};
+
+static int admfm2000_channel_config(struct admfm2000_state *st,
+ struct iio_dev *indio_dev)
+{
+ struct platform_device *pdev = to_platform_device(indio_dev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct fwnode_handle *child;
+ u32 reg, mode;
+ int ret;
+
+ device_for_each_child_node(dev, child) {
+ ret = fwnode_property_read_u32(child, "reg", ®);
+ if (ret) {
+ fwnode_handle_put(child);
+ return dev_err_probe(dev, ret,
+ "Failed to get reg property\n");
+ }
+
+ if (reg >= indio_dev->num_channels) {
+ fwnode_handle_put(child);
+ return dev_err_probe(dev, -EINVAL, "reg bigger than: %d\n",
+ indio_dev->num_channels);
+ }
+
+ ret = fwnode_property_read_u32(child, "adi,mode", &mode);
+ if (ret) {
+ fwnode_handle_put(child);
+ return dev_err_probe(dev, ret,
+ "Failed to get mode property\n");
+ }
+
+ if (mode >= 2) {
+ fwnode_handle_put(child);
+ return dev_err_probe(dev, -EINVAL, "mode bigger than: 1\n");
+ }
+
+ ret = admfm2000_mode(indio_dev, reg, mode);
+ if (ret) {
+ fwnode_handle_put(child);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int admfm2000_setup(struct admfm2000_state *st,
+ struct iio_dev *indio_dev)
+{
+ struct platform_device *pdev = to_platform_device(indio_dev->dev.parent);
+ struct device *dev = &pdev->dev;
+
+ st->sw_ch[0] = devm_gpiod_get_array(dev, "switch1", GPIOD_OUT_LOW);
+ if (IS_ERR(st->sw_ch[0]))
+ return dev_err_probe(dev, PTR_ERR(st->sw_ch[0]),
+ "Failed to get gpios\n");
+
+ if (st->sw_ch[0]->ndescs != ADMF20000_MODE_GPIOS) {
+ dev_err_probe(dev, -ENODEV, "%d GPIOs needed to operate\n",
+ ADMF20000_MODE_GPIOS);
+ return -ENODEV;
+ }
+
+ st->sw_ch[1] = devm_gpiod_get_array(dev, "switch2", GPIOD_OUT_LOW);
+ if (IS_ERR(st->sw_ch[1]))
+ return dev_err_probe(dev, PTR_ERR(st->sw_ch[1]),
+ "Failed to get gpios\n");
+
+ if (st->sw_ch[1]->ndescs != ADMF20000_MODE_GPIOS) {
+ dev_err_probe(dev, -ENODEV, "%d GPIOs needed to operate\n",
+ ADMF20000_MODE_GPIOS);
+ return -ENODEV;
+ }
+
+ st->dsa_gpios[0] = devm_gpiod_get_array(dev, "attenuation1",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->dsa_gpios[0]))
+ return dev_err_probe(dev, PTR_ERR(st->dsa_gpios[0]),
+ "Failed to get gpios\n");
+
+ if (st->dsa_gpios[0]->ndescs != ADMF20000_DSA_GPIOS) {
+ dev_err_probe(dev, -ENODEV, "%d GPIOs needed to operate\n",
+ ADMF20000_DSA_GPIOS);
+ return -ENODEV;
+ }
+
+ st->dsa_gpios[1] = devm_gpiod_get_array(dev, "attenuation2",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->dsa_gpios[1]))
+ return dev_err_probe(dev, PTR_ERR(st->dsa_gpios[1]),
+ "Failed to get gpios\n");
+
+ if (st->dsa_gpios[1]->ndescs != ADMF20000_DSA_GPIOS) {
+ dev_err_probe(dev, -ENODEV, "%d GPIOs needed to operate\n",
+ ADMF20000_DSA_GPIOS);
+ }
+
+ return 0;
+}
+
+static int admfm2000_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct iio_dev *indio_dev;
+ struct admfm2000_state *st;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+
+ indio_dev->name = "admfm2000";
+ indio_dev->num_channels = ARRAY_SIZE(admfm2000_channels);
+ indio_dev->channels = admfm2000_channels;
+ indio_dev->info = &admfm2000_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ st->gain[0] = ADMF20000_DEFAULT_GAIN;
+ st->gain[1] = ADMF20000_DEFAULT_GAIN;
+
+ mutex_init(&st->lock);
+
+ ret = admfm2000_setup(st, indio_dev);
+ if (ret)
+ return ret;
+
+ ret = admfm2000_channel_config(st, indio_dev);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id admfm2000_of_match[] = {
+ { .compatible = "adi,admfm2000" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, admfm2000_of_match);
+
+static struct platform_driver admfm2000_driver = {
+ .driver = {
+ .name = "admfm2000",
+ .of_match_table = admfm2000_of_match,
+ },
+ .probe = admfm2000_probe,
+};
+module_platform_driver(admfm2000_driver);
+
+MODULE_AUTHOR("Kim Seer Paller <[email protected]>");
+MODULE_DESCRIPTION("ADMFM2000 Dual Microwave Down Converter");
+MODULE_LICENSE("GPL");
--
2.34.1
Hi,
Just minor remark inline.
Best regards,
Crt
On Thu, 23 Nov 2023 at 10:44, Kim Seer Paller <[email protected]> wrote:
>
> Dual microwave down converter module with input RF and LO frequency
> ranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to
> 8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifier
> for each down conversion path.
>
> Signed-off-by: Kim Seer Paller <[email protected]>
> ---
> V1 -> V4: No changes.
>
> MAINTAINERS | 1 +
> drivers/iio/frequency/Kconfig | 10 +
> drivers/iio/frequency/Makefile | 1 +
> drivers/iio/frequency/admfm2000.c | 309 ++++++++++++++++++++++++++++++
> 4 files changed, 321 insertions(+)
> create mode 100644 drivers/iio/frequency/admfm2000.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f1692ec68..d8630e490 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1253,6 +1253,7 @@ L: [email protected]
> S: Supported
> W: https://ez.analog.com/linux-software-drivers
> F: Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml
> +F: drivers/iio/frequency/admfm2000.c
>
> ANALOG DEVICES INC ADMV1013 DRIVER
> M: Antoniu Miclaus <[email protected]>
> diff --git a/drivers/iio/frequency/Kconfig b/drivers/iio/frequency/Kconfig
> index 9e85dfa58..c455be7d4 100644
> --- a/drivers/iio/frequency/Kconfig
> +++ b/drivers/iio/frequency/Kconfig
> @@ -60,6 +60,16 @@ config ADF4377
> To compile this driver as a module, choose M here: the
> module will be called adf4377.
>
> +config ADMFM2000
> + tristate "Analog Devices ADMFM2000 Dual Microwave Down Converter"
> + depends on GPIOLIB
> + help
> + Say yes here to build support for Analog Devices ADMFM2000 Dual
> + Microwave Down Converter.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called admfm2000.
> +
> config ADMV1013
> tristate "Analog Devices ADMV1013 Microwave Upconverter"
> depends on SPI && COMMON_CLK
> diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile
> index b616c29b4..70d0e0b70 100644
> --- a/drivers/iio/frequency/Makefile
> +++ b/drivers/iio/frequency/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_AD9523) += ad9523.o
> obj-$(CONFIG_ADF4350) += adf4350.o
> obj-$(CONFIG_ADF4371) += adf4371.o
> obj-$(CONFIG_ADF4377) += adf4377.o
> +obj-$(CONFIG_ADMFM2000) += admfm2000.o
> obj-$(CONFIG_ADMV1013) += admv1013.o
> obj-$(CONFIG_ADMV1014) += admv1014.o
> obj-$(CONFIG_ADMV4420) += admv4420.o
> diff --git a/drivers/iio/frequency/admfm2000.c b/drivers/iio/frequency/admfm2000.c
> new file mode 100644
> index 000000000..e0b5edce7
> --- /dev/null
> +++ b/drivers/iio/frequency/admfm2000.c
> @@ -0,0 +1,309 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * ADMFM2000 Dual Microwave Down Converter
> + *
> + * Copyright 2023 Analog Devices Inc.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/iio/iio.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +
> +#define ADMFM2000_MIXER_MODE 0
> +#define ADMFM2000_DIRECT_IF_MODE 1
> +#define ADMF20000_DSA_GPIOS 5
> +#define ADMF20000_MODE_GPIOS 2
> +#define ADMF20000_MAX_GAIN 0
> +#define ADMF20000_MIN_GAIN -31000
> +#define ADMF20000_DEFAULT_GAIN -0x20
> +
> +struct admfm2000_state {
> + struct mutex lock; /* protect sensor state */
> + struct gpio_descs *sw_ch[2];
> + struct gpio_descs *dsa_gpios[2];
> + u32 gain[2];
> +};
> +
> +static int admfm2000_mode(struct iio_dev *indio_dev, u32 reg, u32 mode)
> +{
> + struct admfm2000_state *st = iio_priv(indio_dev);
> + DECLARE_BITMAP(values, 2);
> +
> + switch (mode) {
> + case ADMFM2000_MIXER_MODE:
> + values[0] = (reg == 0) ? 1 : 2;
> + gpiod_set_array_value_cansleep(st->sw_ch[reg]->ndescs,
> + st->sw_ch[reg]->desc,
> + NULL, values);
> + break;
> + case ADMFM2000_DIRECT_IF_MODE:
> + values[0] = (reg == 0) ? 2 : 1;
> + gpiod_set_array_value_cansleep(st->sw_ch[reg]->ndescs,
> + st->sw_ch[reg]->desc,
> + NULL, values);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int admfm2000_attenuation(struct iio_dev *indio_dev, u32 chan,
> + u32 value)
> +{
> + struct admfm2000_state *st = iio_priv(indio_dev);
> + DECLARE_BITMAP(values, BITS_PER_TYPE(value));
> +
> + values[0] = value;
> +
> + gpiod_set_array_value_cansleep(st->dsa_gpios[chan]->ndescs,
> + st->dsa_gpios[chan]->desc,
> + NULL, values);
> + return 0;
> +}
> +
> +static int admfm2000_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val,
> + int *val2, long mask)
> +{
> + struct admfm2000_state *st = iio_priv(indio_dev);
> + int gain;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_HARDWAREGAIN:
> + mutex_lock(&st->lock);
> + gain = ~(st->gain[chan->channel]) * -1000;
> + *val = gain / 1000;
> + *val2 = (gain % 1000) * 1000;
> + mutex_unlock(&st->lock);
> +
> + return IIO_VAL_INT_PLUS_MICRO_DB;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int admfm2000_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val,
> + int val2, long mask)
> +{
> + struct admfm2000_state *st = iio_priv(indio_dev);
> + int gain, ret;
> +
> + if (val < 0)
> + gain = (val * 1000) - (val2 / 1000);
> + else
> + gain = (val * 1000) + (val2 / 1000);
> +
> + if (gain > ADMF20000_MAX_GAIN || gain < ADMF20000_MIN_GAIN)
> + return -EINVAL;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_HARDWAREGAIN:
> + mutex_lock(&st->lock);
> + st->gain[chan->channel] = ~((abs(gain) / 1000) & 0x1F);
> +
> + ret = admfm2000_attenuation(indio_dev, chan->channel,
> + st->gain[chan->channel]);
> +
> + mutex_unlock(&st->lock);
> + if (ret)
> + return ret;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int admfm2000_write_raw_get_fmt(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + long mask)
> +{
> + switch (mask) {
> + case IIO_CHAN_INFO_HARDWAREGAIN:
> + return IIO_VAL_INT_PLUS_MICRO_DB;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static const struct iio_info admfm2000_info = {
> + .read_raw = &admfm2000_read_raw,
> + .write_raw = &admfm2000_write_raw,
> + .write_raw_get_fmt = &admfm2000_write_raw_get_fmt,
> +};
> +
> +#define ADMFM2000_CHAN(_channel) { \
> + .type = IIO_VOLTAGE, \
> + .output = 1, \
> + .indexed = 1, \
> + .channel = _channel, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
> +}
> +
> +static const struct iio_chan_spec admfm2000_channels[] = {
> + ADMFM2000_CHAN(0),
> + ADMFM2000_CHAN(1),
> +};
> +
> +static int admfm2000_channel_config(struct admfm2000_state *st,
> + struct iio_dev *indio_dev)
> +{
> + struct platform_device *pdev = to_platform_device(indio_dev->dev.parent);
> + struct device *dev = &pdev->dev;
> + struct fwnode_handle *child;
> + u32 reg, mode;
> + int ret;
> +
> + device_for_each_child_node(dev, child) {
> + ret = fwnode_property_read_u32(child, "reg", ®);
> + if (ret) {
> + fwnode_handle_put(child);
> + return dev_err_probe(dev, ret,
> + "Failed to get reg property\n");
> + }
> +
> + if (reg >= indio_dev->num_channels) {
> + fwnode_handle_put(child);
> + return dev_err_probe(dev, -EINVAL, "reg bigger than: %d\n",
> + indio_dev->num_channels);
> + }
> +
> + ret = fwnode_property_read_u32(child, "adi,mode", &mode);
> + if (ret) {
> + fwnode_handle_put(child);
> + return dev_err_probe(dev, ret,
> + "Failed to get mode property\n");
> + }
> +
> + if (mode >= 2) {
> + fwnode_handle_put(child);
> + return dev_err_probe(dev, -EINVAL, "mode bigger than: 1\n");
> + }
> +
> + ret = admfm2000_mode(indio_dev, reg, mode);
> + if (ret) {
> + fwnode_handle_put(child);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int admfm2000_setup(struct admfm2000_state *st,
> + struct iio_dev *indio_dev)
> +{
> + struct platform_device *pdev = to_platform_device(indio_dev->dev.parent);
> + struct device *dev = &pdev->dev;
> +
> + st->sw_ch[0] = devm_gpiod_get_array(dev, "switch1", GPIOD_OUT_LOW);
> + if (IS_ERR(st->sw_ch[0]))
> + return dev_err_probe(dev, PTR_ERR(st->sw_ch[0]),
> + "Failed to get gpios\n");
> +
> + if (st->sw_ch[0]->ndescs != ADMF20000_MODE_GPIOS) {
> + dev_err_probe(dev, -ENODEV, "%d GPIOs needed to operate\n",
> + ADMF20000_MODE_GPIOS);
> + return -ENODEV;
> + }
> +
> + st->sw_ch[1] = devm_gpiod_get_array(dev, "switch2", GPIOD_OUT_LOW);
> + if (IS_ERR(st->sw_ch[1]))
> + return dev_err_probe(dev, PTR_ERR(st->sw_ch[1]),
> + "Failed to get gpios\n");
> +
> + if (st->sw_ch[1]->ndescs != ADMF20000_MODE_GPIOS) {
> + dev_err_probe(dev, -ENODEV, "%d GPIOs needed to operate\n",
> + ADMF20000_MODE_GPIOS);
> + return -ENODEV;
> + }
> +
> + st->dsa_gpios[0] = devm_gpiod_get_array(dev, "attenuation1",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(st->dsa_gpios[0]))
> + return dev_err_probe(dev, PTR_ERR(st->dsa_gpios[0]),
> + "Failed to get gpios\n");
> +
> + if (st->dsa_gpios[0]->ndescs != ADMF20000_DSA_GPIOS) {
> + dev_err_probe(dev, -ENODEV, "%d GPIOs needed to operate\n",
> + ADMF20000_DSA_GPIOS);
> + return -ENODEV;
> + }
> +
> + st->dsa_gpios[1] = devm_gpiod_get_array(dev, "attenuation2",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(st->dsa_gpios[1]))
> + return dev_err_probe(dev, PTR_ERR(st->dsa_gpios[1]),
> + "Failed to get gpios\n");
> +
> + if (st->dsa_gpios[1]->ndescs != ADMF20000_DSA_GPIOS) {
> + dev_err_probe(dev, -ENODEV, "%d GPIOs needed to operate\n",
> + ADMF20000_DSA_GPIOS);
no return -ENODEV here?
> + }
> +
> + return 0;
> +}
> +
> +static int admfm2000_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct iio_dev *indio_dev;
> + struct admfm2000_state *st;
> + int ret;
Order these in reverse christmass tree like you did above.
> +
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + st = iio_priv(indio_dev);
> +
> + indio_dev->name = "admfm2000";
> + indio_dev->num_channels = ARRAY_SIZE(admfm2000_channels);
> + indio_dev->channels = admfm2000_channels;
> + indio_dev->info = &admfm2000_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + st->gain[0] = ADMF20000_DEFAULT_GAIN;
> + st->gain[1] = ADMF20000_DEFAULT_GAIN;
> +
> + mutex_init(&st->lock);
> +
> + ret = admfm2000_setup(st, indio_dev);
> + if (ret)
> + return ret;
> +
> + ret = admfm2000_channel_config(st, indio_dev);
> + if (ret)
> + return ret;
> +
> + return devm_iio_device_register(dev, indio_dev);
> +}
> +
> +static const struct of_device_id admfm2000_of_match[] = {
> + { .compatible = "adi,admfm2000" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, admfm2000_of_match);
> +
> +static struct platform_driver admfm2000_driver = {
> + .driver = {
> + .name = "admfm2000",
> + .of_match_table = admfm2000_of_match,
> + },
> + .probe = admfm2000_probe,
> +};
> +module_platform_driver(admfm2000_driver);
> +
> +MODULE_AUTHOR("Kim Seer Paller <[email protected]>");
> +MODULE_DESCRIPTION("ADMFM2000 Dual Microwave Down Converter");
> +MODULE_LICENSE("GPL");
> --
> 2.34.1
>
>
On Thu, 23 Nov 2023 11:19:51 +0100
Crt Mori <[email protected]> wrote:
> Hi,
> Just minor remark inline.
>
> Best regards,
> Crt
Hi Crt,
Please crop replies / reviews to only relevant context. If there are lots of
comments it maybe fine to leave whole driver but that's not the case ehre.
Should only see something like...
Thanks,
Jonathan
>
> On Thu, 23 Nov 2023 at 10:44, Kim Seer Paller <[email protected]> wrote:
> >
> > Dual microwave down converter module with input RF and LO frequency
> > ranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to
> > 8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifier
> > for each down conversion path.
> >
> > Signed-off-by: Kim Seer Paller <[email protected]>
> > ---
...
> > +static int admfm2000_setup(struct admfm2000_state *st,
> > + struct iio_dev *indio_dev)
> > +{
...
> > + if (st->dsa_gpios[1]->ndescs != ADMF20000_DSA_GPIOS) {
> > + dev_err_probe(dev, -ENODEV, "%d GPIOs needed to operate\n",
> > + ADMF20000_DSA_GPIOS);
>
> no return -ENODEV here?
>
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int admfm2000_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct iio_dev *indio_dev;
> > + struct admfm2000_state *st;
> > + int ret;
>
> Order these in reverse christmass tree like you did above.
>
>
> > +
> > + indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
> > + if (!indio_dev)
> > + return -ENOMEM;
> > +
> > + st = iio_priv(indio_dev);
> > +
> > + indio_dev->name = "admfm2000";
> > + indio_dev->num_channels = ARRAY_SIZE(admfm2000_channels);
> > + indio_dev->channels = admfm2000_channels;
> > + indio_dev->info = &admfm2000_info;
> > + indio_dev->modes = INDIO_DIRECT_MODE;
> > +
> > + st->gain[0] = ADMF20000_DEFAULT_GAIN;
> > + st->gain[1] = ADMF20000_DEFAULT_GAIN;
> > +
> > + mutex_init(&st->lock);
> > +
> > + ret = admfm2000_setup(st, indio_dev);
> > + if (ret)
> > + return ret;
> > +
> > + ret = admfm2000_channel_config(st, indio_dev);
> > + if (ret)
> > + return ret;
> > +
> > + return devm_iio_device_register(dev, indio_dev);
> > +}
Thanks,
Jonathan