Currently we have auto suspend delay of 1s which is
very high and it takes long time to driver for runtime
suspend after use case is done.
Hence to optimize runtime PM ops, reduce auto suspend
delay to 100ms.
Signed-off-by: Viken Dadhaniya <[email protected]>
---
drivers/slimbus/qcom-ngd-ctrl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index efeba8275a66..5de45a0e3da5 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -81,7 +81,7 @@
#define SLIM_USR_MC_DISCONNECT_PORT 0x2E
#define SLIM_USR_MC_REPEAT_CHANGE_VALUE 0x0
-#define QCOM_SLIM_NGD_AUTOSUSPEND MSEC_PER_SEC
+#define QCOM_SLIM_NGD_AUTOSUSPEND (MSEC_PER_SEC / 10)
#define SLIM_RX_MSGQ_TIMEOUT_VAL 0x10000
#define SLIM_LA_MGR 0xFF
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
On 3/4/24 14:50, Viken Dadhaniya wrote:
> Currently we have auto suspend delay of 1s which is
> very high and it takes long time to driver for runtime
> suspend after use case is done.
>
> Hence to optimize runtime PM ops, reduce auto suspend
> delay to 100ms.
>
> Signed-off-by: Viken Dadhaniya <[email protected]>
> ---
What determines 1s to be high and 100ms to be low enough? Could
you share some more reasoning?
> drivers/slimbus/qcom-ngd-ctrl.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
> index efeba8275a66..5de45a0e3da5 100644
> --- a/drivers/slimbus/qcom-ngd-ctrl.c
> +++ b/drivers/slimbus/qcom-ngd-ctrl.c
> @@ -81,7 +81,7 @@
> #define SLIM_USR_MC_DISCONNECT_PORT 0x2E
> #define SLIM_USR_MC_REPEAT_CHANGE_VALUE 0x0
>
> -#define QCOM_SLIM_NGD_AUTOSUSPEND MSEC_PER_SEC
> +#define QCOM_SLIM_NGD_AUTOSUSPEND (MSEC_PER_SEC / 10)
This could be a good opportunity to inline this value..
Konrad
On 3/6/2024 2:46 AM, Konrad Dybcio wrote:
>
>
> On 3/4/24 14:50, Viken Dadhaniya wrote:
>> Currently we have auto suspend delay of 1s which is
>> very high and it takes long time to driver for runtime
>> suspend after use case is done.
>>
>> Hence to optimize runtime PM ops, reduce auto suspend
>> delay to 100ms.
>>
>> Signed-off-by: Viken Dadhaniya <[email protected]>
>> ---
>
> What determines 1s to be high and 100ms to be low enough? Could
> you share some more reasoning?
Right now we don't have exact number which can quantify either power or
performance. But we are following small window so as to not keep timer
running longer while having resources like Clock ON. Theoretically and
testing wise, this is not creating any side effect too.
>
>> drivers/slimbus/qcom-ngd-ctrl.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/slimbus/qcom-ngd-ctrl.c
>> b/drivers/slimbus/qcom-ngd-ctrl.c
>> index efeba8275a66..5de45a0e3da5 100644
>> --- a/drivers/slimbus/qcom-ngd-ctrl.c
>> +++ b/drivers/slimbus/qcom-ngd-ctrl.c
>> @@ -81,7 +81,7 @@
>> #define SLIM_USR_MC_DISCONNECT_PORT 0x2E
>> #define SLIM_USR_MC_REPEAT_CHANGE_VALUE 0x0
>> -#define QCOM_SLIM_NGD_AUTOSUSPEND MSEC_PER_SEC
>> +#define QCOM_SLIM_NGD_AUTOSUSPEND (MSEC_PER_SEC / 10)
>
> This could be a good opportunity to inline this value..
Updated in v2.
>
> Konrad