2024-04-12 03:12:29

by Shuijing Li (李水静)

[permalink] [raw]
Subject: [PATCH v2] mediatek: dsi: Correct calculation formula of PHY Timing

This patch correct calculation formula of PHY timing.
The spec define HS-PREPARE should be from 40ns+4*UI(44ns) to
85ns+6*UI(91ns). But current duration is 88ns and is near the boundary.
So this patch make the duration to 64ns so it is near the safe range.

Signed-off-by: Shuijing Li <[email protected]>
---
Changes in v2:
Add a commit to describe the improvements to this patch in detail,
per suggestion frome previous thread:
https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 33 +++++++++++++++---------------
1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index a2fdfc8ddb15..d1bd7d671880 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -235,22 +235,23 @@ static void mtk_dsi_phy_timconfig(struct mtk_dsi *dsi)
u32 data_rate_mhz = DIV_ROUND_UP(dsi->data_rate, 1000000);
struct mtk_phy_timing *timing = &dsi->phy_timing;

- timing->lpx = (60 * data_rate_mhz / (8 * 1000)) + 1;
- timing->da_hs_prepare = (80 * data_rate_mhz + 4 * 1000) / 8000;
- timing->da_hs_zero = (170 * data_rate_mhz + 10 * 1000) / 8000 + 1 -
- timing->da_hs_prepare;
- timing->da_hs_trail = timing->da_hs_prepare + 1;
-
- timing->ta_go = 4 * timing->lpx - 2;
- timing->ta_sure = timing->lpx + 2;
- timing->ta_get = 4 * timing->lpx;
- timing->da_hs_exit = 2 * timing->lpx + 1;
-
- timing->clk_hs_prepare = 70 * data_rate_mhz / (8 * 1000);
- timing->clk_hs_post = timing->clk_hs_prepare + 8;
- timing->clk_hs_trail = timing->clk_hs_prepare;
- timing->clk_hs_zero = timing->clk_hs_trail * 4;
- timing->clk_hs_exit = 2 * timing->clk_hs_trail;
+ timing->lpx = (80 * data_rate_mhz / (8 * 1000)) + 1;
+ timing->da_hs_prepare = (59 * data_rate_mhz + 4 * 1000) / 8000 + 1;
+ timing->da_hs_zero = (163 * data_rate_mhz + 11 * 1000) / 8000 + 1 -
+ timing->da_hs_prepare;
+ timing->da_hs_trail = (78 * data_rate_mhz + 7 * 1000) / 8000 + 1;
+
+ timing->ta_go = 4 * timing->lpx;
+ timing->ta_sure = 3 * timing->lpx / 2;
+ timing->ta_get = 5 * timing->lpx;
+ timing->da_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;
+
+ timing->clk_hs_prepare = (57 * data_rate_mhz / (8 * 1000)) + 1;
+ timing->clk_hs_post = (65 * data_rate_mhz + 53 * 1000) / 8000 + 1;
+ timing->clk_hs_trail = (78 * data_rate_mhz + 7 * 1000) / 8000 + 1;
+ timing->clk_hs_zero = (330 * data_rate_mhz / (8 * 1000)) + 1 -
+ timing->clk_hs_prepare;
+ timing->clk_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;

timcon0 = timing->lpx | timing->da_hs_prepare << 8 |
timing->da_hs_zero << 16 | timing->da_hs_trail << 24;
--
2.43.0



2024-04-22 06:24:02

by CK Hu (胡俊光)

[permalink] [raw]
Subject: Re: [PATCH v2] mediatek: dsi: Correct calculation formula of PHY Timing

Hi, Shuijing:

On Fri, 2024-04-12 at 11:11 +0800, Shuijing Li wrote:
> This patch correct calculation formula of PHY timing.
> The spec define HS-PREPARE should be from 40ns+4*UI(44ns) to
> 85ns+6*UI(91ns). But current duration is 88ns and is near the
> boundary.
> So this patch make the duration to 64ns so it is near the safe range.

Reviewed-by: CK Hu <[email protected]>

>
> Signed-off-by: Shuijing Li <[email protected]>
> ---
> Changes in v2:
> Add a commit to describe the improvements to this patch in detail,
> per suggestion frome previous thread:
>
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/patch/[email protected]/__;!!CTRNKA9wMg0ARbw!izTVzhN1oe9FMDawQlr9R7PNf0n6z7ZgcSw8IUcNfcZxAJQ6Rja9aHaUoL7lISbdMHUvONao6-3_wZbs0aH72A$
>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 33 +++++++++++++++-------------
> --
> 1 file changed, 17 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c
> b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index a2fdfc8ddb15..d1bd7d671880 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -235,22 +235,23 @@ static void mtk_dsi_phy_timconfig(struct
> mtk_dsi *dsi)
> u32 data_rate_mhz = DIV_ROUND_UP(dsi->data_rate, 1000000);
> struct mtk_phy_timing *timing = &dsi->phy_timing;
>
> - timing->lpx = (60 * data_rate_mhz / (8 * 1000)) + 1;
> - timing->da_hs_prepare = (80 * data_rate_mhz + 4 * 1000) / 8000;
> - timing->da_hs_zero = (170 * data_rate_mhz + 10 * 1000) / 8000 +
> 1 -
> - timing->da_hs_prepare;
> - timing->da_hs_trail = timing->da_hs_prepare + 1;
> -
> - timing->ta_go = 4 * timing->lpx - 2;
> - timing->ta_sure = timing->lpx + 2;
> - timing->ta_get = 4 * timing->lpx;
> - timing->da_hs_exit = 2 * timing->lpx + 1;
> -
> - timing->clk_hs_prepare = 70 * data_rate_mhz / (8 * 1000);
> - timing->clk_hs_post = timing->clk_hs_prepare + 8;
> - timing->clk_hs_trail = timing->clk_hs_prepare;
> - timing->clk_hs_zero = timing->clk_hs_trail * 4;
> - timing->clk_hs_exit = 2 * timing->clk_hs_trail;
> + timing->lpx = (80 * data_rate_mhz / (8 * 1000)) + 1;
> + timing->da_hs_prepare = (59 * data_rate_mhz + 4 * 1000) / 8000
> + 1;
> + timing->da_hs_zero = (163 * data_rate_mhz + 11 * 1000) / 8000 +
> 1 -
> + timing->da_hs_prepare;
> + timing->da_hs_trail = (78 * data_rate_mhz + 7 * 1000) / 8000 +
> 1;
> +
> + timing->ta_go = 4 * timing->lpx;
> + timing->ta_sure = 3 * timing->lpx / 2;
> + timing->ta_get = 5 * timing->lpx;
> + timing->da_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;
> +
> + timing->clk_hs_prepare = (57 * data_rate_mhz / (8 * 1000)) + 1;
> + timing->clk_hs_post = (65 * data_rate_mhz + 53 * 1000) / 8000 +
> 1;
> + timing->clk_hs_trail = (78 * data_rate_mhz + 7 * 1000) / 8000 +
> 1;
> + timing->clk_hs_zero = (330 * data_rate_mhz / (8 * 1000)) + 1 -
> + timing->clk_hs_prepare;
> + timing->clk_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;
>
> timcon0 = timing->lpx | timing->da_hs_prepare << 8 |
> timing->da_hs_zero << 16 | timing->da_hs_trail << 24;