Summary:
Revise linux device tree entry related to Meta(Facebook) Harma
specific devices connected to BMC(AST2600) SoC.
Base on : https://lore.kernel.org/all/CACPK8XePx+PvDKzPMjPRn_g9z8yrtAmLvP8Qbepm1AVjuCbaKw@mail.gmail.com/
Change log:
v4 -> v5
- Patch 0011 - Add retimer device
- Patch 0012 - Modify gpio line name
v3 -> v4
- Patch 0010 - Revise node name
- fixed PDB temperature node name in Patch 0006
v2 -> v3
- Patch 0007 - Revise max31790 address
- Patch 0008 - Harma: Add NIC Fru device
- Patch 0009 - Add ltc4286 device
v1 -> v2
- Add infineon,slb9670 information for tpm.
- Patch 0006 - Add PDB temperature.
v1
- Patch 0001 - Revise SGPIO line name.
- Patch 0002 - Mapping ttyS2 to UART4.
- Patch 0003 - Remove Vuart.
- Patch 0004 - Add cpu power good line name.
- Patch 0005 - Add spi-gpio.
Peter Yin (12):
ARM: dts: aspeed: Harma: Revise SGPIO line name.
ARM: dts: aspeed: Harma: mapping ttyS2 to UART4.
ARM: dts: aspeed: Harma: Remove Vuart
ARM: dts: aspeed: Harma: Add cpu power good line name
ARM: dts: aspeed: Harma: Add spi-gpio
ARM: dts: aspeed: Harma: Add PDB temperature
ARM: dts: aspeed: Harma: Revise max31790 address
ARM: dts: aspeed: Harma: Add NIC Fru device
ARM: dts: aspeed: Harma: Add ltc4286 device
ARM: dts: aspeed: Harma: Revise node name
ARM: dts: aspeed: Harma: Add retimer device
ARM: dts: aspeed: Harma: Modify GPIO line name
.../dts/aspeed/aspeed-bmc-facebook-harma.dts | 107 ++++++++++++++----
1 file changed, 85 insertions(+), 22 deletions(-)
--
2.25.1
The same name as reset-control-smb-e1s
change to reset-control-smb-e1s-0 and reset-control-smb-e1s-0.
Signed-off-by: Peter Yin <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 7db3f9eb0016..8a173863ef24 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -505,9 +505,9 @@ &sgpiom0 {
"","reset-control-cpu0-p1-mux",
"","reset-control-e1s-mux",
"power-host-good","reset-control-mb-mux",
- "","reset-control-smb-e1s",
+ "","reset-control-smb-e1s-0",
/*E0-E3 line 64-71*/
- "","reset-control-smb-e1s",
+ "","reset-control-smb-e1s-1",
"host-ready-n","reset-control-srst",
"presence-e1s-0","reset-control-usb-hub",
"","reset-control",
--
2.25.1
Remove vuart to avoid port conflict with uart2
Signed-off-by: Peter Yin <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index a0056d633eb1..5d692e9f541e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -100,10 +100,6 @@ &uart_routing {
status = "okay";
};
-&vuart1 {
- status = "okay";
-};
-
&wdt1 {
status = "okay";
pinctrl-names = "default";
--
2.25.1
Add a line name for cpu power good.
Signed-off-by: Peter Yin <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 5d692e9f541e..36aad01dda20 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -501,7 +501,7 @@ &sgpiom0 {
"","reset-control-cpu0-p1-mux",
"","reset-control-e1s-mux",
"power-host-good","reset-control-mb-mux",
- "","reset-control-smb-e1s-0",
+ "power-cpu-good","reset-control-smb-e1s-0",
/*E0-E3 line 64-71*/
"","reset-control-smb-e1s-1",
"host-ready-n","reset-control-srst",
--
2.25.1
Change routing to match SOL(Serial Over LAN) settings.
Signed-off-by: Peter Yin <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 8a173863ef24..a0056d633eb1 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -12,8 +12,8 @@ / {
aliases {
serial0 = &uart1;
- serial1 = &uart6;
- serial2 = &uart2;
+ serial1 = &uart2;
+ serial2 = &uart4;
serial4 = &uart5;
i2c20 = &imux20;
--
2.25.1
Revise max31790 address from 0x30 to 0x5e
Signed-off-by: Peter Yin <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 5c3fa8bbaced..7e98af5836cf 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -192,9 +192,9 @@ &kcs3 {
&i2c0 {
status = "okay";
- max31790@30{
+ max31790@5e{
compatible = "max31790";
- reg = <0x30>;
+ reg = <0x5e>;
#address-cells = <1>;
#size-cells = <0>;
};
@@ -212,9 +212,9 @@ temperature-sensor@4b {
&i2c2 {
status = "okay";
- max31790@30{
+ max31790@5e{
compatible = "max31790";
- reg = <0x30>;
+ reg = <0x5e>;
#address-cells = <1>;
#size-cells = <0>;
};
--
2.25.1
Add spi-gpio for tpm device.
Signed-off-by: Peter Yin <[email protected]>
---
.../dts/aspeed/aspeed-bmc-facebook-harma.dts | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 36aad01dda20..ca3052cce0e0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -28,6 +28,8 @@ aliases {
i2c29 = &imux29;
i2c30 = &imux30;
i2c31 = &imux31;
+
+ spi1 = &spi_gpio;
};
chosen {
@@ -67,6 +69,25 @@ led-2 {
gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>;
};
};
+
+ spi_gpio: spi-gpio {
+ status = "okay";
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+ tpmdev@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
};
// HOST BIOS Debug
--
2.25.1
Add ltc4286 device.
Signed-off-by: Peter Yin <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 6e9e6e559838..7dd48c384a4d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -271,6 +271,13 @@ temperature-sensor@49 {
compatible = "ti,tmp75";
reg = <0x49>;
};
+
+ power-monitor@22 {
+ compatible = "lltc,ltc4286";
+ reg = <0x22>;
+ adi,vrange-low-enable;
+ shunt-resistor-micro-ohms = <500>;
+ };
};
&i2c5 {
--
2.25.1
Add PDB temperature sensor.
Signed-off-by: Peter Yin <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index ca3052cce0e0..5c3fa8bbaced 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -203,7 +203,7 @@ max31790@30{
&i2c1 {
status = "okay";
- tmp75@4b {
+ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
@@ -260,6 +260,11 @@ delta_brick@69 {
compatible = "pmbus";
reg = <0x69>;
};
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp75";
+ reg = <0x49>;
+ };
};
&i2c5 {
--
2.25.1
Revise max31790 and delta_brick node name.
Signed-off-by: Peter Yin <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 7dd48c384a4d..530f69005857 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -192,7 +192,7 @@ &kcs3 {
&i2c0 {
status = "okay";
- max31790@5e{
+ pwm@5e{
compatible = "max31790";
reg = <0x5e>;
#address-cells = <1>;
@@ -218,7 +218,7 @@ eeprom@50 {
&i2c2 {
status = "okay";
- max31790@5e{
+ pwm@5e{
compatible = "max31790";
reg = <0x5e>;
#address-cells = <1>;
@@ -262,7 +262,7 @@ eeprom@52 {
reg = <0x52>;
};
- delta_brick@69 {
+ power-monitor@69 {
compatible = "pmbus";
reg = <0x69>;
};
--
2.25.1
Add pt5161l device in i2c bus12 and bus21.
Signed-off-by: Peter Yin <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 530f69005857..a5abb16e5d8b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -250,6 +250,10 @@ imux21: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+ retimer@24 {
+ compatible = "asteralabs,pt5161l";
+ reg = <0x24>;
+ };
};
};
};
@@ -370,6 +374,10 @@ &i2c11 {
&i2c12 {
status = "okay";
+ retimer@24 {
+ compatible = "asteralabs,pt5161l";
+ reg = <0x24>;
+ };
};
&i2c13 {
--
2.25.1
Add MB NIC Device
Signed-off-by: Peter Yin <[email protected]>
---
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 7e98af5836cf..6e9e6e559838 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -207,6 +207,12 @@ temperature-sensor@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
+
+ // MB NIC FRU
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
};
&i2c2 {
--
2.25.1
Add:
"reset-cause-platrst", "cpu0-err-alert", "leakage-detect-alert",
"presence-post-card", "ac-power-button", "P0_I3C_APML_ALERT_L",
"irq-uv-detect-alert", "irq-hsc-alert", "cpu0-prochot-alert",
"cpu0-thermtrip-alert", "reset-cause-pcie", "pvdd11-ocp-alert"
Rename:
"power-cpu-good" to "host0-ready",
"host-ready-n" to "post-end-n
Signed-off-by: Peter Yin <[email protected]>
---
.../dts/aspeed/aspeed-bmc-facebook-harma.dts | 38 ++++++++++++++-----
1 file changed, 29 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index a5abb16e5d8b..e7f4823ca4b3 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -332,6 +332,12 @@ gpio@31 {
reg = <0x31>;
gpio-controller;
#gpio-cells = <2>;
+
+ gpio-line-names =
+ "","","","",
+ "","","presence-cmm","",
+ "","","","",
+ "","","","";
};
i2c-mux@71 {
@@ -471,7 +477,8 @@ &gpio0 {
/*A0-A7*/ "","","","","","","","",
/*B0-B7*/ "","","","",
"bmc-spi-mux-select-0","led-identify","","",
- /*C0-C7*/ "","","","","","","","",
+ /*C0-C7*/ "reset-cause-platrst","","","","",
+ "cpu0-err-alert","","",
/*D0-D7*/ "","","sol-uart-select","","","","","",
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "","","","","","","","",
@@ -480,7 +487,8 @@ &gpio0 {
/*I0-I7*/ "","","","","","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
- /*L0-L7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","",
+ "leakage-detect-alert","","","",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "led-postcode-0","led-postcode-1",
"led-postcode-2","led-postcode-3",
@@ -499,7 +507,16 @@ &gpio0 {
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
- /*Z0-Z7*/ "","","","","","","","";
+ /*Z0-Z7*/ "","","","","","","presence-post-card","";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0-18A7*/ "ac-power-button","","","","","","","",
+ /*18B0-18B7*/ "","","","","","","","",
+ /*18C0-18C7*/ "","","","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "","","","","","","","";
};
&sgpiom0 {
@@ -548,10 +565,10 @@ &sgpiom0 {
"","reset-control-cpu0-p1-mux",
"","reset-control-e1s-mux",
"power-host-good","reset-control-mb-mux",
- "power-cpu-good","reset-control-smb-e1s-0",
+ "host0-ready","reset-control-smb-e1s-0",
/*E0-E3 line 64-71*/
"","reset-control-smb-e1s-1",
- "host-ready-n","reset-control-srst",
+ "post-end-n","reset-control-srst",
"presence-e1s-0","reset-control-usb-hub",
"","reset-control",
/*E4-E7 line 72-79*/
@@ -602,13 +619,16 @@ &sgpiom0 {
"SLOT_ID_BCB_2","",
"SLOT_ID_BCB_3","",
/*K0-K3 line 160-167*/
- "","","","","","","","",
+ "","","","","","","P0_I3C_APML_ALERT_L","",
/*K4-K7 line 168-175*/
- "","","","","","","","",
+ "","","","","","","irq-uv-detect-alert","",
/*L0-L3 line 176-183*/
- "","","","","","","","",
+ "irq-hsc-alert","",
+ "cpu0-prochot-alert","",
+ "cpu0-thermtrip-alert","",
+ "reset-cause-pcie","",
/*L4-L7 line 184-191*/
- "","","","","","","","",
+ "pvdd11-ocp-alert","","","","","","","",
/*M0-M3 line 192-199*/
"","","","","","","","",
/*M4-M7 line 200-207*/
--
2.25.1
On Fri, 2024-04-12 at 17:15 +0800, Peter Yin wrote:
> Summary:
> Revise linux device tree entry related to Meta(Facebook) Harma
> specific devices connected to BMC(AST2600) SoC.
>
> Base on : https://lore.kernel.org/all/CACPK8XePx+PvDKzPMjPRn_g9z8yrtAmLvP8Qbepm1AVjuCbaKw@mail.gmail.com/
>
> Change log:
>
> v4 -> v5
> - Patch 0011 - Add retimer device
> - Patch 0012 - Modify gpio line name
>
> v3 -> v4
> - Patch 0010 - Revise node name
> - fixed PDB temperature node name in Patch 0006
>
> v2 -> v3
> - Patch 0007 - Revise max31790 address
> - Patch 0008 - Harma: Add NIC Fru device
> - Patch 0009 - Add ltc4286 device
>
> v1 -> v2
> - Add infineon,slb9670 information for tpm.
> - Patch 0006 - Add PDB temperature.
>
> v1
> - Patch 0001 - Revise SGPIO line name.
> - Patch 0002 - Mapping ttyS2 to UART4.
> - Patch 0003 - Remove Vuart.
> - Patch 0004 - Add cpu power good line name.
> - Patch 0005 - Add spi-gpio.
>
> Peter Yin (12):
> ARM: dts: aspeed: Harma: Revise SGPIO line name.
> ARM: dts: aspeed: Harma: mapping ttyS2 to UART4.
> ARM: dts: aspeed: Harma: Remove Vuart
> ARM: dts: aspeed: Harma: Add cpu power good line name
> ARM: dts: aspeed: Harma: Add spi-gpio
> ARM: dts: aspeed: Harma: Add PDB temperature
> ARM: dts: aspeed: Harma: Revise max31790 address
> ARM: dts: aspeed: Harma: Add NIC Fru device
> ARM: dts: aspeed: Harma: Add ltc4286 device
> ARM: dts: aspeed: Harma: Revise node name
> ARM: dts: aspeed: Harma: Add retimer device
> ARM: dts: aspeed: Harma: Modify GPIO line name
>
> .../dts/aspeed/aspeed-bmc-facebook-harma.dts | 107 ++++++++++++++----
> 1 file changed, 85 insertions(+), 22 deletions(-)
>
Joel had applied an earlier version of this series to his for-next
branch. I'm collecting patches targeting it while he's on leave. I've
updated the series he'd applied to the v5 you've posted here.
Can you please post any further changes as patches on top? You can find
my branch here:
https://github.com/amboar/linux/tree/for/bmc/dt-6.10
Andrew
Sure thing, I will base on version 5 for future modifications.
Thanks.
On Mon, Apr 15, 2024 at 10:00 AM Andrew Jeffery
<[email protected]> wrote:
>
> On Fri, 2024-04-12 at 17:15 +0800, Peter Yin wrote:
> > Summary:
> > Revise linux device tree entry related to Meta(Facebook) Harma
> > specific devices connected to BMC(AST2600) SoC.
> >
> > Base on : https://lore.kernel.org/all/CACPK8XePx+PvDKzPMjPRn_g9z8yrtAmLvP8Qbepm1AVjuCbaKw@mail.gmail.com/
> >
> > Change log:
> >
> > v4 -> v5
> > - Patch 0011 - Add retimer device
> > - Patch 0012 - Modify gpio line name
> >
> > v3 -> v4
> > - Patch 0010 - Revise node name
> > - fixed PDB temperature node name in Patch 0006
> >
> > v2 -> v3
> > - Patch 0007 - Revise max31790 address
> > - Patch 0008 - Harma: Add NIC Fru device
> > - Patch 0009 - Add ltc4286 device
> >
> > v1 -> v2
> > - Add infineon,slb9670 information for tpm.
> > - Patch 0006 - Add PDB temperature.
> >
> > v1
> > - Patch 0001 - Revise SGPIO line name.
> > - Patch 0002 - Mapping ttyS2 to UART4.
> > - Patch 0003 - Remove Vuart.
> > - Patch 0004 - Add cpu power good line name.
> > - Patch 0005 - Add spi-gpio.
> >
> > Peter Yin (12):
> > ARM: dts: aspeed: Harma: Revise SGPIO line name.
> > ARM: dts: aspeed: Harma: mapping ttyS2 to UART4.
> > ARM: dts: aspeed: Harma: Remove Vuart
> > ARM: dts: aspeed: Harma: Add cpu power good line name
> > ARM: dts: aspeed: Harma: Add spi-gpio
> > ARM: dts: aspeed: Harma: Add PDB temperature
> > ARM: dts: aspeed: Harma: Revise max31790 address
> > ARM: dts: aspeed: Harma: Add NIC Fru device
> > ARM: dts: aspeed: Harma: Add ltc4286 device
> > ARM: dts: aspeed: Harma: Revise node name
> > ARM: dts: aspeed: Harma: Add retimer device
> > ARM: dts: aspeed: Harma: Modify GPIO line name
> >
> > .../dts/aspeed/aspeed-bmc-facebook-harma.dts | 107 ++++++++++++++----
> > 1 file changed, 85 insertions(+), 22 deletions(-)
> >
>
> Joel had applied an earlier version of this series to his for-next
> branch. I'm collecting patches targeting it while he's on leave. I've
> updated the series he'd applied to the v5 you've posted here.
>
> Can you please post any further changes as patches on top? You can find
> my branch here:
>
> https://github.com/amboar/linux/tree/for/bmc/dt-6.10
>
> Andrew