Tightly-Coupled Memories(TCMs) are low-latency memory that provides
predictable instruction execution and predictable data load/store
timing. Each Cortex-R5F processor contains exclusive two 64 KB memory
banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
In lockstep mode, both 128KB memory is accessible to the cluster.
As per ZynqMP Ultrascale+ Technical Reference Manual UG1085, following
is address space of TCM memory. The bindings in this patch series
introduces properties to accommodate following address space with
address translation between Linux and Cortex-R5 views.
| | | |
| --- | --- | --- |
| *Mode* | *R5 View* | *Linux view* | Notes |
| *Split Mode* | *start addr*| *start addr* | |
| R5_0 ATCM (64 KB) | 0x0000_0000 | 0xFFE0_0000 | |
| R5_0 BTCM (64 KB) | 0x0002_0000 | 0xFFE2_0000 | |
| R5_1 ATCM (64 KB) | 0x0000_0000 | 0xFFE9_0000 | alias of 0xFFE1_0000 |
| R5_1 BTCM (64 KB) | 0x0002_0000 | 0xFFEB_0000 | alias of 0xFFE3_0000 |
| ___ | ___ | ___ | |
| *Lockstep Mode* | | | |
| R5_0 ATCM (128 KB) | 0x0000_0000 | 0xFFE0_0000 | |
| R5_0 BTCM (128 KB) | 0x0002_0000 | 0xFFE2_0000 | |
References:
UG1085 TCM address space:
https://docs.xilinx.com/r/en-US/ug1085-zynq-ultrascale-trm/Tightly-Coupled-Memory-Address-Map
---
prerequisite-patch-link: https://lore.kernel.org/all/[email protected]/
Base Branch: 6.9.rc2
Changes in v15:
- Use hardcode TCM addresses as fallback method if "reg" unavailable
- Use new bindings for r5fss subsystem
Changes in v14:
- Add xlnx,tcm-mode property and use it for TCM configuration
- Add Versal and Versal-NET platform support
- Maintain backward compatibility for ZynqMP platform and use hardcode
TCM addresses
Changes in v13:
- Have power-domains property for lockstep case instead of
keeping it flexible.
- Add "items:" list in power-domains property
Radhey Shyam Pandey (1):
dt-bindings: remoteproc: add Tightly Coupled Memory (TCM) bindings
Tanmay Shah (3):
remoteproc: zynqmp: fix lockstep mode memory region
dts: zynqmp: add properties for TCM in remoteproc
remoteproc: zynqmp: parse TCM from device tree
.../remoteproc/xlnx,zynqmp-r5fss.yaml | 279 ++++++++++++++++--
.../boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts | 8 +
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 67 ++++-
drivers/remoteproc/xlnx_r5_remoteproc.c | 273 +++++++++--------
4 files changed, 459 insertions(+), 168 deletions(-)
base-commit: 4d5aabb6843939fad36912be8bf109adf9af0848
--
2.25.1
In lockstep mode, r5 core0 uses TCM of R5 core1. Following is lockstep
mode memory region as per hardware reference manual.
| *TCM* | *R5 View* | *Linux view* |
| R5_0 ATCM (128 KB) | 0x0000_0000 | 0xFFE0_0000 |
| R5_0 BTCM (128 KB) | 0x0002_0000 | 0xFFE2_0000 |
However, driver shouldn't model it as above because R5 core0 TCM and core1
TCM has different power-domains mapped to it.
Hence, TCM address space in lockstep mode should be modeled as 64KB
regions only where each region has its own power-domain as following:
| *TCM* | *R5 View* | *Linux view* |
| R5_0 ATCM0 (64 KB) | 0x0000_0000 | 0xFFE0_0000 |
| R5_0 BTCM0 (64 KB) | 0x0002_0000 | 0xFFE2_0000 |
| R5_0 ATCM1 (64 KB) | 0x0001_0000 | 0xFFE1_0000 |
| R5_0 BTCM1 (64 KB) | 0x0003_0000 | 0xFFE3_0000 |
This makes driver maintanance easy and makes design robust for future
platorms as well.
Signed-off-by: Tanmay Shah <[email protected]>
---
drivers/remoteproc/xlnx_r5_remoteproc.c | 146 ++----------------------
1 file changed, 12 insertions(+), 134 deletions(-)
diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
index cfbd97b89c26..0f942440b4e2 100644
--- a/drivers/remoteproc/xlnx_r5_remoteproc.c
+++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
@@ -84,12 +84,12 @@ static const struct mem_bank_data zynqmp_tcm_banks_split[] = {
{0xffeb0000UL, 0x20000, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
};
-/* In lockstep mode cluster combines each 64KB TCM and makes 128KB TCM */
+/* In lockstep mode cluster uses each 64KB TCM from second core as well */
static const struct mem_bank_data zynqmp_tcm_banks_lockstep[] = {
- {0xffe00000UL, 0x0, 0x20000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 128KB each */
- {0xffe20000UL, 0x20000, 0x20000UL, PD_R5_0_BTCM, "btcm0"},
- {0, 0, 0, PD_R5_1_ATCM, ""},
- {0, 0, 0, PD_R5_1_BTCM, ""},
+ {0xffe00000UL, 0x0, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
+ {0xffe20000UL, 0x20000, 0x10000UL, PD_R5_0_BTCM, "btcm0"},
+ {0xffe10000UL, 0x10000, 0x10000UL, PD_R5_1_ATCM, "atcm1"},
+ {0xffe30000UL, 0x30000, 0x10000UL, PD_R5_1_BTCM, "btcm1"},
};
/**
@@ -541,14 +541,14 @@ static int tcm_mem_map(struct rproc *rproc,
}
/*
- * add_tcm_carveout_split_mode()
+ * add_tcm_banks()
* @rproc: single R5 core's corresponding rproc instance
*
- * allocate and add remoteproc carveout for TCM memory in split mode
+ * allocate and add remoteproc carveout for TCM memory
*
* return 0 on success, otherwise non-zero value on failure
*/
-static int add_tcm_carveout_split_mode(struct rproc *rproc)
+static int add_tcm_banks(struct rproc *rproc)
{
struct rproc_mem_entry *rproc_mem;
struct zynqmp_r5_core *r5_core;
@@ -581,10 +581,10 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
ZYNQMP_PM_REQUEST_ACK_BLOCKING);
if (ret < 0) {
dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id);
- goto release_tcm_split;
+ goto release_tcm;
}
- dev_dbg(dev, "TCM carveout split mode %s addr=%llx, da=0x%x, size=0x%lx",
+ dev_dbg(dev, "TCM carveout %s addr=%llx, da=0x%x, size=0x%lx",
bank_name, bank_addr, da, bank_size);
rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
@@ -594,99 +594,16 @@ static int add_tcm_carveout_split_mode(struct rproc *rproc)
if (!rproc_mem) {
ret = -ENOMEM;
zynqmp_pm_release_node(pm_domain_id);
- goto release_tcm_split;
- }
-
- rproc_add_carveout(rproc, rproc_mem);
- rproc_coredump_add_segment(rproc, da, bank_size);
- }
-
- return 0;
-
-release_tcm_split:
- /* If failed, Turn off all TCM banks turned on before */
- for (i--; i >= 0; i--) {
- pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
- zynqmp_pm_release_node(pm_domain_id);
- }
- return ret;
-}
-
-/*
- * add_tcm_carveout_lockstep_mode()
- * @rproc: single R5 core's corresponding rproc instance
- *
- * allocate and add remoteproc carveout for TCM memory in lockstep mode
- *
- * return 0 on success, otherwise non-zero value on failure
- */
-static int add_tcm_carveout_lockstep_mode(struct rproc *rproc)
-{
- struct rproc_mem_entry *rproc_mem;
- struct zynqmp_r5_core *r5_core;
- int i, num_banks, ret;
- phys_addr_t bank_addr;
- size_t bank_size = 0;
- struct device *dev;
- u32 pm_domain_id;
- char *bank_name;
- u32 da;
-
- r5_core = rproc->priv;
- dev = r5_core->dev;
-
- /* Go through zynqmp banks for r5 node */
- num_banks = r5_core->tcm_bank_count;
-
- /*
- * In lockstep mode, TCM is contiguous memory block
- * However, each TCM block still needs to be enabled individually.
- * So, Enable each TCM block individually.
- * Although ATCM and BTCM is contiguous memory block, add two separate
- * carveouts for both.
- */
- for (i = 0; i < num_banks; i++) {
- pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
-
- /* Turn on each TCM bank individually */
- ret = zynqmp_pm_request_node(pm_domain_id,
- ZYNQMP_PM_CAPABILITY_ACCESS, 0,
- ZYNQMP_PM_REQUEST_ACK_BLOCKING);
- if (ret < 0) {
- dev_err(dev, "failed to turn on TCM 0x%x", pm_domain_id);
- goto release_tcm_lockstep;
- }
-
- bank_size = r5_core->tcm_banks[i]->size;
- if (bank_size == 0)
- continue;
-
- bank_addr = r5_core->tcm_banks[i]->addr;
- da = r5_core->tcm_banks[i]->da;
- bank_name = r5_core->tcm_banks[i]->bank_name;
-
- /* Register TCM address range, TCM map and unmap functions */
- rproc_mem = rproc_mem_entry_init(dev, NULL, bank_addr,
- bank_size, da,
- tcm_mem_map, tcm_mem_unmap,
- bank_name);
- if (!rproc_mem) {
- ret = -ENOMEM;
- zynqmp_pm_release_node(pm_domain_id);
- goto release_tcm_lockstep;
+ goto release_tcm;
}
- /* If registration is success, add carveouts */
rproc_add_carveout(rproc, rproc_mem);
rproc_coredump_add_segment(rproc, da, bank_size);
-
- dev_dbg(dev, "TCM carveout lockstep mode %s addr=0x%llx, da=0x%x, size=0x%lx",
- bank_name, bank_addr, da, bank_size);
}
return 0;
-release_tcm_lockstep:
+release_tcm:
/* If failed, Turn off all TCM banks turned on before */
for (i--; i >= 0; i--) {
pm_domain_id = r5_core->tcm_banks[i]->pm_domain_id;
@@ -695,45 +612,6 @@ static int add_tcm_carveout_lockstep_mode(struct rproc *rproc)
return ret;
}
-/*
- * add_tcm_banks()
- * @rproc: single R5 core's corresponding rproc instance
- *
- * allocate and add remoteproc carveouts for TCM memory based on cluster mode
- *
- * return 0 on success, otherwise non-zero value on failure
- */
-static int add_tcm_banks(struct rproc *rproc)
-{
- struct zynqmp_r5_cluster *cluster;
- struct zynqmp_r5_core *r5_core;
- struct device *dev;
-
- r5_core = rproc->priv;
- if (!r5_core)
- return -EINVAL;
-
- dev = r5_core->dev;
-
- cluster = dev_get_drvdata(dev->parent);
- if (!cluster) {
- dev_err(dev->parent, "Invalid driver data\n");
- return -EINVAL;
- }
-
- /*
- * In lockstep mode TCM banks are one contiguous memory region of 256Kb
- * In split mode, each TCM bank is 64Kb and not contiguous.
- * We add memory carveouts accordingly.
- */
- if (cluster->mode == SPLIT_MODE)
- return add_tcm_carveout_split_mode(rproc);
- else if (cluster->mode == LOCKSTEP_MODE)
- return add_tcm_carveout_lockstep_mode(rproc);
-
- return -EINVAL;
-}
-
/*
* zynqmp_r5_parse_fw()
* @rproc: single R5 core's corresponding rproc instance
--
2.25.1
From: Radhey Shyam Pandey <[email protected]>
Introduce bindings for TCM memory address space on AMD-xilinx Zynq
UltraScale+ platform. It will help in defining TCM in device-tree
and make it's access platform agnostic and data-driven.
Tightly-coupled memories(TCMs) are low-latency memory that provides
predictable instruction execution and predictable data load/store
timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
The TCM resources(reg, reg-names and power-domain) are documented for
each TCM in the R5 node. The reg and reg-names are made as required
properties as we don't want to hardcode TCM addresses for future
platforms and for zu+ legacy implementation will ensure that the
old dts w/o reg/reg-names works and stable ABI is maintained.
It also extends the examples for TCM split and lockstep modes.
Signed-off-by: Radhey Shyam Pandey <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Tanmay Shah <[email protected]>
---
.../remoteproc/xlnx,zynqmp-r5fss.yaml | 279 ++++++++++++++++--
1 file changed, 257 insertions(+), 22 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
index 78aac69f1060..6f13da11f593 100644
--- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
@@ -18,11 +18,26 @@ description: |
properties:
compatible:
- const: xlnx,zynqmp-r5fss
+ enum:
+ - xlnx,zynqmp-r5fss
+ - xlnx,versal-r5fss
+ - xlnx,versal-net-r52fss
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ ranges:
+ description: |
+ Standard ranges definition providing address translations for
+ local R5F TCM address spaces to bus addresses.
xlnx,cluster-mode:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
+ default: 1
description: |
The RPU MPCore can operate in split mode (Dual-processor performance), Safety
lock-step mode(Both RPU cores execute the same code in lock-step,
@@ -36,8 +51,16 @@ properties:
1: lockstep mode (default)
2: single cpu mode
+ xlnx,tcm-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ Configure RPU TCM
+ 0: split mode
+ 1: lockstep mode
+
patternProperties:
- "^r5f-[a-f0-9]+$":
+ "^r(.*)@[0-9a-f]+$":
type: object
description: |
The RPU is located in the Low Power Domain of the Processor Subsystem.
@@ -52,10 +75,22 @@ patternProperties:
properties:
compatible:
- const: xlnx,zynqmp-r5f
+ enum:
+ - xlnx,zynqmp-r5f
+ - xlnx,versal-r5f
+ - xlnx,versal-net-r52f
+
+ reg:
+ minItems: 1
+ maxItems: 4
+
+ reg-names:
+ minItems: 1
+ maxItems: 4
power-domains:
- maxItems: 1
+ minItems: 2
+ maxItems: 5
mboxes:
minItems: 1
@@ -101,35 +136,235 @@ patternProperties:
required:
- compatible
+ - reg
+ - reg-names
- power-domains
- unevaluatedProperties: false
-
required:
- compatible
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,versal-net-r52fss
+ then:
+ properties:
+ xlnx,tcm-mode: false
+
+ patternProperties:
+ "^r52f@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: ATCM internal memory
+ - description: BTCM internal memory
+ - description: CTCM internal memory
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: atcm0
+ - const: btcm0
+ - const: ctcm0
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: RPU core power domain
+ - description: ATCM power domain
+ - description: BTCM power domain
+ - description: CTCM power domain
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,zynqmp-r5fss
+ - xlnx,versal-r5fss
+ then:
+ if:
+ properties:
+ xlnx,cluster-mode:
+ enum: [1, 2]
+ then:
+ properties:
+ xlnx,tcm-mode:
+ enum: [1]
+
+ patternProperties:
+ "^r5f@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: ATCM internal memory
+ - description: BTCM internal memory
+ - description: extra ATCM memory in lockstep mode
+ - description: extra BTCM memory in lockstep mode
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: atcm0
+ - const: btcm0
+ - const: atcm1
+ - const: btcm1
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: RPU core power domain
+ - description: ATCM power domain
+ - description: BTCM power domain
+ - description: second ATCM power domain
+ - description: second BTCM power domain
+
+ required:
+ - xlnx,tcm-mode
+
+ else:
+ properties:
+ xlnx,tcm-mode:
+ enum: [0]
+
+ patternProperties:
+ "^r5f@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: ATCM internal memory
+ - description: BTCM internal memory
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: atcm0
+ - const: btcm0
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: RPU core power domain
+ - description: ATCM power domain
+ - description: BTCM power domain
+
+ required:
+ - xlnx,tcm-mode
additionalProperties: false
examples:
- |
- remoteproc {
- compatible = "xlnx,zynqmp-r5fss";
- xlnx,cluster-mode = <1>;
-
- r5f-0 {
- compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware 0x7>;
- memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
- mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
- mbox-names = "tx", "rx";
+ #include <dt-bindings/power/xlnx-zynqmp-power.h>
+
+ // Split mode configuration
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ remoteproc@ffe00000 {
+ compatible = "xlnx,zynqmp-r5fss";
+ xlnx,cluster-mode = <0>;
+ xlnx,tcm-mode = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+ <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+ <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
+ <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
+
+ r5f@0 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>;
+ memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+ <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+ mbox-names = "tx", "rx";
+ };
+
+ r5f@1 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+ <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+ mbox-names = "tx", "rx";
+ };
};
+ };
+
+ - |
+ //Lockstep configuration
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ remoteproc@ffe00000 {
+ compatible = "xlnx,zynqmp-r5fss";
+ xlnx,cluster-mode = <1>;
+ xlnx,tcm-mode = <1>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+ <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+ <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>,
+ <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>;
+
+ r5f@0 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x0 0x0 0x0 0x10000>,
+ <0x0 0x20000 0x0 0x10000>,
+ <0x0 0x10000 0x0 0x10000>,
+ <0x0 0x30000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0", "atcm1", "btcm1";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+ <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+ mbox-names = "tx", "rx";
+ };
- r5f-1 {
- compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware 0x8>;
- memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
- mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
- mbox-names = "tx", "rx";
+ r5f@1 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+ <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+ mbox-names = "tx", "rx";
+ };
};
};
...
--
2.25.1
ZynqMP TCM information was fixed in driver. Now ZynqMP TCM information
is available in device-tree. Parse TCM information in driver
as per new bindings.
Signed-off-by: Tanmay Shah <[email protected]>
---
Changes in v15:
- Use hardcode TCM addresses as fallback method if "reg" unavailable
- Remove Versal and Versal-net support
Changes in v14:
- Add Versal platform support
- Add Versal-NET platform support
- Maintain backward compatibility for ZynqMP platform and use hardcode
TCM addresses
- Configure TCM based on xlnx,tcm-mode property for Versal
- Avoid TCM configuration if that property isn't available in dt
drivers/remoteproc/xlnx_r5_remoteproc.c | 127 ++++++++++++++++++++++--
1 file changed, 120 insertions(+), 7 deletions(-)
diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
index 0f942440b4e2..7b1c12108bff 100644
--- a/drivers/remoteproc/xlnx_r5_remoteproc.c
+++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
@@ -74,8 +74,8 @@ struct mbox_info {
};
/*
- * Hardcoded TCM bank values. This will be removed once TCM bindings are
- * accepted for system-dt specifications and upstreamed in linux kernel
+ * Hardcoded TCM bank values. This will stay in driver to maintain backward
+ * compatibility with device-tree that does not have TCM information.
*/
static const struct mem_bank_data zynqmp_tcm_banks_split[] = {
{0xffe00000UL, 0x0, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
@@ -761,6 +761,103 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev)
return ERR_PTR(ret);
}
+static int zynqmp_r5_get_tcm_node_from_dt(struct zynqmp_r5_cluster *cluster)
+{
+ int i, j, tcm_bank_count, ret, tcm_pd_idx, pd_count;
+ struct of_phandle_args out_args;
+ struct zynqmp_r5_core *r5_core;
+ struct platform_device *cpdev;
+ struct mem_bank_data *tcm;
+ struct device_node *np;
+ struct resource *res;
+ u64 abs_addr, size;
+ struct device *dev;
+
+ for (i = 0; i < cluster->core_count; i++) {
+ r5_core = cluster->r5_cores[i];
+ dev = r5_core->dev;
+ np = r5_core->np;
+
+ pd_count = of_count_phandle_with_args(np, "power-domains",
+ "#power-domain-cells");
+
+ if (pd_count <= 0) {
+ dev_err(dev, "invalid power-domains property, %d\n", pd_count);
+ return -EINVAL;
+ }
+
+ /* First entry in power-domains list is for r5 core, rest for TCM. */
+ tcm_bank_count = pd_count - 1;
+
+ if (tcm_bank_count <= 0) {
+ dev_err(dev, "invalid TCM count %d\n", tcm_bank_count);
+ return -EINVAL;
+ }
+
+ r5_core->tcm_banks = devm_kcalloc(dev, tcm_bank_count,
+ sizeof(struct mem_bank_data *),
+ GFP_KERNEL);
+ if (!r5_core->tcm_banks)
+ return -ENOMEM;
+
+ r5_core->tcm_bank_count = tcm_bank_count;
+ for (j = 0, tcm_pd_idx = 1; j < tcm_bank_count; j++, tcm_pd_idx++) {
+ tcm = devm_kzalloc(dev, sizeof(struct mem_bank_data),
+ GFP_KERNEL);
+ if (!tcm)
+ return -ENOMEM;
+
+ r5_core->tcm_banks[j] = tcm;
+
+ /* Get power-domains id of TCM. */
+ ret = of_parse_phandle_with_args(np, "power-domains",
+ "#power-domain-cells",
+ tcm_pd_idx, &out_args);
+ if (ret) {
+ dev_err(r5_core->dev,
+ "failed to get tcm %d pm domain, ret %d\n",
+ tcm_pd_idx, ret);
+ return ret;
+ }
+ tcm->pm_domain_id = out_args.args[0];
+ of_node_put(out_args.np);
+
+ /* Get TCM address without translation. */
+ ret = of_property_read_reg(np, j, &abs_addr, &size);
+ if (ret) {
+ dev_err(dev, "failed to get reg property\n");
+ return ret;
+ }
+
+ /*
+ * Remote processor can address only 32 bits
+ * so convert 64-bits into 32-bits. This will discard
+ * any unwanted upper 32-bits.
+ */
+ tcm->da = (u32)abs_addr;
+ tcm->size = (u32)size;
+
+ cpdev = to_platform_device(dev);
+ res = platform_get_resource(cpdev, IORESOURCE_MEM, j);
+ if (!res) {
+ dev_err(dev, "failed to get tcm resource\n");
+ return -EINVAL;
+ }
+
+ tcm->addr = (u32)res->start;
+ tcm->bank_name = (char *)res->name;
+ res = devm_request_mem_region(dev, tcm->addr, tcm->size,
+ tcm->bank_name);
+ if (!res) {
+ dev_err(dev, "failed to request tcm resource\n");
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+}
+
/**
* zynqmp_r5_get_tcm_node()
* Ideally this function should parse tcm node and store information
@@ -839,9 +936,16 @@ static int zynqmp_r5_core_init(struct zynqmp_r5_cluster *cluster,
struct zynqmp_r5_core *r5_core;
int ret, i;
- ret = zynqmp_r5_get_tcm_node(cluster);
- if (ret < 0) {
- dev_err(dev, "can't get tcm node, err %d\n", ret);
+ r5_core = cluster->r5_cores[0];
+
+ /* Maintain backward compatibility for zynqmp by using hardcode TCM address. */
+ if (of_find_property(r5_core->np, "reg", NULL))
+ ret = zynqmp_r5_get_tcm_node_from_dt(cluster);
+ else
+ ret = zynqmp_r5_get_tcm_node(cluster);
+
+ if (ret) {
+ dev_err(dev, "can't get tcm, err %d\n", ret);
return ret;
}
@@ -906,16 +1010,25 @@ static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster)
* fail driver probe if either of that is not set in dts.
*/
if (cluster_mode == LOCKSTEP_MODE) {
- tcm_mode = PM_RPU_TCM_COMB;
fw_reg_val = PM_RPU_MODE_LOCKSTEP;
} else if (cluster_mode == SPLIT_MODE) {
- tcm_mode = PM_RPU_TCM_SPLIT;
fw_reg_val = PM_RPU_MODE_SPLIT;
} else {
dev_err(dev, "driver does not support cluster mode %d\n", cluster_mode);
return -EINVAL;
}
+ if (of_find_property(dev_node, "xlnx,tcm-mode", NULL)) {
+ ret = of_property_read_u32(dev_node, "xlnx,tcm-mode", (u32 *)&tcm_mode);
+ if (ret)
+ return ret;
+ } else {
+ if (cluster_mode == LOCKSTEP_MODE)
+ tcm_mode = PM_RPU_TCM_COMB;
+ else
+ tcm_mode = PM_RPU_TCM_SPLIT;
+ }
+
/*
* Number of cores is decided by number of child nodes of
* r5f subsystem node in dts. If Split mode is used in dts
--
2.25.1
Add properties as per new bindings in zynqmp remoteproc node
to represent TCM address and size.
This patch also adds alternative remoteproc node to represent
remoteproc cluster in split mode. By default lockstep mode is
enabled and users should disable it before using split mode
dts. Both device-tree nodes can't be used simultaneously one
of them must be disabled. For zcu102-1.0 and zcu102-1.1 board
remoteproc split mode dts node is enabled and lockstep mode
dts is disabled.
Signed-off-by: Tanmay Shah <[email protected]>
---
.../boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts | 8 +++
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 67 +++++++++++++++++--
2 files changed, 70 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
index c8f71a1aec89..495ca94b45db 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
@@ -14,6 +14,14 @@ / {
compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
};
+&rproc_split {
+ status = "okay";
+};
+
+&rproc_lockstep {
+ status = "disabled";
+};
+
&eeprom {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 25d20d803230..ef31b0fc73d1 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -260,19 +260,76 @@ fpga_full: fpga-full {
ranges;
};
- remoteproc {
+ rproc_lockstep: remoteproc@ffe00000 {
compatible = "xlnx,zynqmp-r5fss";
xlnx,cluster-mode = <1>;
+ xlnx,tcm-mode = <1>;
- r5f-0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+ <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+ <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>,
+ <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>;
+
+ r5f@0 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x0 0x0 0x0 0x10000>,
+ <0x0 0x20000 0x0 0x10000>,
+ <0x0 0x10000 0x0 0x10000>,
+ <0x0 0x30000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0", "atcm1", "btcm1";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_0_fw_image>;
+ };
+
+ r5f@1 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_1_fw_image>;
+ };
+ };
+
+ rproc_split: remoteproc-split@ffe00000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-r5fss";
+ xlnx,cluster-mode = <0>;
+ xlnx,tcm-mode = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+ <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+ <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
+ <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
+
+ r5f@0 {
compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware PD_RPU_0>;
+ reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>;
memory-region = <&rproc_0_fw_image>;
};
- r5f-1 {
+ r5f@1 {
compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware PD_RPU_1>;
+ reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
memory-region = <&rproc_1_fw_image>;
};
};
--
2.25.1
On Fri, Apr 12, 2024 at 11:37:07AM -0700, Tanmay Shah wrote:
> Add properties as per new bindings in zynqmp remoteproc node
> to represent TCM address and size.
>
> This patch also adds alternative remoteproc node to represent
> remoteproc cluster in split mode. By default lockstep mode is
> enabled and users should disable it before using split mode
> dts. Both device-tree nodes can't be used simultaneously one
> of them must be disabled. For zcu102-1.0 and zcu102-1.1 board
> remoteproc split mode dts node is enabled and lockstep mode
> dts is disabled.
>
> Signed-off-by: Tanmay Shah <[email protected]>
> ---
> .../boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts | 8 +++
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 67 +++++++++++++++++--
> 2 files changed, 70 insertions(+), 5 deletions(-)
>
Reviewed-by: Mathieu Poirier <[email protected]>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
> index c8f71a1aec89..495ca94b45db 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
> @@ -14,6 +14,14 @@ / {
> compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
> };
>
> +&rproc_split {
> + status = "okay";
> +};
> +
> +&rproc_lockstep {
> + status = "disabled";
> +};
> +
> &eeprom {
> #address-cells = <1>;
> #size-cells = <1>;
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 25d20d803230..ef31b0fc73d1 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -260,19 +260,76 @@ fpga_full: fpga-full {
> ranges;
> };
>
> - remoteproc {
> + rproc_lockstep: remoteproc@ffe00000 {
> compatible = "xlnx,zynqmp-r5fss";
> xlnx,cluster-mode = <1>;
> + xlnx,tcm-mode = <1>;
>
> - r5f-0 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
> + <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
> + <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>,
> + <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>;
> +
> + r5f@0 {
> + compatible = "xlnx,zynqmp-r5f";
> + reg = <0x0 0x0 0x0 0x10000>,
> + <0x0 0x20000 0x0 0x10000>,
> + <0x0 0x10000 0x0 0x10000>,
> + <0x0 0x30000 0x0 0x10000>;
> + reg-names = "atcm0", "btcm0", "atcm1", "btcm1";
> + power-domains = <&zynqmp_firmware PD_RPU_0>,
> + <&zynqmp_firmware PD_R5_0_ATCM>,
> + <&zynqmp_firmware PD_R5_0_BTCM>,
> + <&zynqmp_firmware PD_R5_1_ATCM>,
> + <&zynqmp_firmware PD_R5_1_BTCM>;
> + memory-region = <&rproc_0_fw_image>;
> + };
> +
> + r5f@1 {
> + compatible = "xlnx,zynqmp-r5f";
> + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
> + reg-names = "atcm0", "btcm0";
> + power-domains = <&zynqmp_firmware PD_RPU_1>,
> + <&zynqmp_firmware PD_R5_1_ATCM>,
> + <&zynqmp_firmware PD_R5_1_BTCM>;
> + memory-region = <&rproc_1_fw_image>;
> + };
> + };
> +
> + rproc_split: remoteproc-split@ffe00000 {
> + status = "disabled";
> + compatible = "xlnx,zynqmp-r5fss";
> + xlnx,cluster-mode = <0>;
> + xlnx,tcm-mode = <0>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
> + <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
> + <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
> + <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
> +
> + r5f@0 {
> compatible = "xlnx,zynqmp-r5f";
> - power-domains = <&zynqmp_firmware PD_RPU_0>;
> + reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
> + reg-names = "atcm0", "btcm0";
> + power-domains = <&zynqmp_firmware PD_RPU_0>,
> + <&zynqmp_firmware PD_R5_0_ATCM>,
> + <&zynqmp_firmware PD_R5_0_BTCM>;
> memory-region = <&rproc_0_fw_image>;
> };
>
> - r5f-1 {
> + r5f@1 {
> compatible = "xlnx,zynqmp-r5f";
> - power-domains = <&zynqmp_firmware PD_RPU_1>;
> + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
> + reg-names = "atcm0", "btcm0";
> + power-domains = <&zynqmp_firmware PD_RPU_1>,
> + <&zynqmp_firmware PD_R5_1_ATCM>,
> + <&zynqmp_firmware PD_R5_1_BTCM>;
> memory-region = <&rproc_1_fw_image>;
> };
> };
> --
> 2.25.1
>
On Fri, Apr 12, 2024 at 11:37:04AM -0700, Tanmay Shah wrote:
> Tightly-Coupled Memories(TCMs) are low-latency memory that provides
> predictable instruction execution and predictable data load/store
> timing. Each Cortex-R5F processor contains exclusive two 64 KB memory
> banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
> In lockstep mode, both 128KB memory is accessible to the cluster.
>
> As per ZynqMP Ultrascale+ Technical Reference Manual UG1085, following
> is address space of TCM memory. The bindings in this patch series
> introduces properties to accommodate following address space with
> address translation between Linux and Cortex-R5 views.
>
> | | | |
> | --- | --- | --- |
> | *Mode* | *R5 View* | *Linux view* | Notes |
> | *Split Mode* | *start addr*| *start addr* | |
> | R5_0 ATCM (64 KB) | 0x0000_0000 | 0xFFE0_0000 | |
> | R5_0 BTCM (64 KB) | 0x0002_0000 | 0xFFE2_0000 | |
> | R5_1 ATCM (64 KB) | 0x0000_0000 | 0xFFE9_0000 | alias of 0xFFE1_0000 |
> | R5_1 BTCM (64 KB) | 0x0002_0000 | 0xFFEB_0000 | alias of 0xFFE3_0000 |
> | ___ | ___ | ___ | |
> | *Lockstep Mode* | | | |
> | R5_0 ATCM (128 KB) | 0x0000_0000 | 0xFFE0_0000 | |
> | R5_0 BTCM (128 KB) | 0x0002_0000 | 0xFFE2_0000 | |
>
> References:
> UG1085 TCM address space:
> https://docs.xilinx.com/r/en-US/ug1085-zynq-ultrascale-trm/Tightly-Coupled-Memory-Address-Map
>
I have applied patches 1, 2 and 4 of this set. Patch 3 should to through
Michal's tree.
Thanks,
Mathieu
> ---
>
> prerequisite-patch-link: https://lore.kernel.org/all/[email protected]/
> Base Branch: 6.9.rc2
>
> Changes in v15:
> - Use hardcode TCM addresses as fallback method if "reg" unavailable
> - Use new bindings for r5fss subsystem
>
> Changes in v14:
> - Add xlnx,tcm-mode property and use it for TCM configuration
> - Add Versal and Versal-NET platform support
> - Maintain backward compatibility for ZynqMP platform and use hardcode
> TCM addresses
>
> Changes in v13:
> - Have power-domains property for lockstep case instead of
> keeping it flexible.
> - Add "items:" list in power-domains property
>
>
> Radhey Shyam Pandey (1):
> dt-bindings: remoteproc: add Tightly Coupled Memory (TCM) bindings
>
> Tanmay Shah (3):
> remoteproc: zynqmp: fix lockstep mode memory region
> dts: zynqmp: add properties for TCM in remoteproc
> remoteproc: zynqmp: parse TCM from device tree
>
> .../remoteproc/xlnx,zynqmp-r5fss.yaml | 279 ++++++++++++++++--
> .../boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts | 8 +
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 67 ++++-
> drivers/remoteproc/xlnx_r5_remoteproc.c | 273 +++++++++--------
> 4 files changed, 459 insertions(+), 168 deletions(-)
>
>
> base-commit: 4d5aabb6843939fad36912be8bf109adf9af0848
> --
> 2.25.1
>
On 4/12/24 20:37, Tanmay Shah wrote:
> Add properties as per new bindings in zynqmp remoteproc node
> to represent TCM address and size.
>
> This patch also adds alternative remoteproc node to represent
> remoteproc cluster in split mode. By default lockstep mode is
> enabled and users should disable it before using split mode
> dts. Both device-tree nodes can't be used simultaneously one
> of them must be disabled. For zcu102-1.0 and zcu102-1.1 board
> remoteproc split mode dts node is enabled and lockstep mode
> dts is disabled.
>
> Signed-off-by: Tanmay Shah <[email protected]>
> ---
> .../boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts | 8 +++
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 67 +++++++++++++++++--
> 2 files changed, 70 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
> index c8f71a1aec89..495ca94b45db 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
> @@ -14,6 +14,14 @@ / {
> compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
> };
>
> +&rproc_split {
> + status = "okay";
> +};
> +
> +&rproc_lockstep {
> + status = "disabled";
> +};
> +
> &eeprom {
> #address-cells = <1>;
> #size-cells = <1>;
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 25d20d803230..ef31b0fc73d1 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -260,19 +260,76 @@ fpga_full: fpga-full {
> ranges;
> };
>
> - remoteproc {
> + rproc_lockstep: remoteproc@ffe00000 {
> compatible = "xlnx,zynqmp-r5fss";
> xlnx,cluster-mode = <1>;
> + xlnx,tcm-mode = <1>;
>
> - r5f-0 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
> + <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
> + <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>,
> + <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>;
> +
> + r5f@0 {
> + compatible = "xlnx,zynqmp-r5f";
> + reg = <0x0 0x0 0x0 0x10000>,
> + <0x0 0x20000 0x0 0x10000>,
> + <0x0 0x10000 0x0 0x10000>,
> + <0x0 0x30000 0x0 0x10000>;
> + reg-names = "atcm0", "btcm0", "atcm1", "btcm1";
> + power-domains = <&zynqmp_firmware PD_RPU_0>,
> + <&zynqmp_firmware PD_R5_0_ATCM>,
> + <&zynqmp_firmware PD_R5_0_BTCM>,
> + <&zynqmp_firmware PD_R5_1_ATCM>,
> + <&zynqmp_firmware PD_R5_1_BTCM>;
> + memory-region = <&rproc_0_fw_image>;
> + };
> +
> + r5f@1 {
> + compatible = "xlnx,zynqmp-r5f";
> + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
> + reg-names = "atcm0", "btcm0";
> + power-domains = <&zynqmp_firmware PD_RPU_1>,
> + <&zynqmp_firmware PD_R5_1_ATCM>,
> + <&zynqmp_firmware PD_R5_1_BTCM>;
> + memory-region = <&rproc_1_fw_image>;
> + };
> + };
> +
> + rproc_split: remoteproc-split@ffe00000 {
> + status = "disabled";
> + compatible = "xlnx,zynqmp-r5fss";
> + xlnx,cluster-mode = <0>;
> + xlnx,tcm-mode = <0>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
> + <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
> + <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
> + <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
> +
> + r5f@0 {
> compatible = "xlnx,zynqmp-r5f";
> - power-domains = <&zynqmp_firmware PD_RPU_0>;
> + reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
> + reg-names = "atcm0", "btcm0";
> + power-domains = <&zynqmp_firmware PD_RPU_0>,
> + <&zynqmp_firmware PD_R5_0_ATCM>,
> + <&zynqmp_firmware PD_R5_0_BTCM>;
> memory-region = <&rproc_0_fw_image>;
> };
>
> - r5f-1 {
> + r5f@1 {
> compatible = "xlnx,zynqmp-r5f";
> - power-domains = <&zynqmp_firmware PD_RPU_1>;
> + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
> + reg-names = "atcm0", "btcm0";
> + power-domains = <&zynqmp_firmware PD_RPU_1>,
> + <&zynqmp_firmware PD_R5_1_ATCM>,
> + <&zynqmp_firmware PD_R5_1_BTCM>;
> memory-region = <&rproc_1_fw_image>;
> };
> };
Applied.
Thanks,
Michal