2024-05-09 01:49:41

by Joy Zou

Subject: [PATCH] arm64: dts: imx93-11x11-evk: reoder lpi2c2 and lpi2c3 label

Reorder lpi2c2 and lpi2c3 label in alphabetical order.

Signed-off-by: Joy Zou <[email protected]>
---
.../boot/dts/freescale/imx93-11x11-evk.dts | 217 +++++++++---------
1 file changed, 105 insertions(+), 112 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index d400d85f42a9..6be1eb920c02 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -105,6 +105,104 @@ &mu2 {
status = "okay";
};

+&lpi2c2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c2>;
+ pinctrl-1 = <&pinctrl_lpi2c2>;
+ status = "okay";
+
+ pcal6524: gpio@22 {
+ compatible = "nxp,pcal6524";
+ reg = <0x22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcal6524>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmic@25 {
+ compatible = "nxp,pca9451a";
+ reg = <0x25>;
+ interrupt-parent = <&pcal6524>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <610000>;
+ regulator-max-microvolt = <950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <670000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck4: BUCK4{
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5: BUCK5{
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <1060000>;
+ regulator-max-microvolt = <1140000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <840000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
&lpi2c3 {
#address-cells = <1>;
#size-cells = <0>;
@@ -113,6 +211,13 @@ &lpi2c3 {
pinctrl-0 = <&pinctrl_lpi2c3>;
status = "okay";

+ pcf2131: rtc@53 {
+ compatible = "nxp,pcf2131";
+ reg = <0x53>;
+ interrupt-parent = <&pcal6524>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ };
+
ptn5110: tcpc@50 {
compatible = "nxp,ptn5110", "tcpci";
reg = <0x50>;
@@ -304,118 +409,6 @@ &wdog3 {
status = "okay";
};

-&lpi2c2 {
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pinctrl_lpi2c2>;
- pinctrl-1 = <&pinctrl_lpi2c2>;
- status = "okay";
-
- pcal6524: gpio@22 {
- compatible = "nxp,pcal6524";
- reg = <0x22>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcal6524>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&gpio3>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
- };
-
- pmic@25 {
- compatible = "nxp,pca9451a";
- reg = <0x25>;
- interrupt-parent = <&pcal6524>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-
- regulators {
- buck1: BUCK1 {
- regulator-name = "BUCK1";
- regulator-min-microvolt = <610000>;
- regulator-max-microvolt = <950000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- };
-
- buck2: BUCK2 {
- regulator-name = "BUCK2";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <670000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- };
-
- buck4: BUCK4{
- regulator-name = "BUCK4";
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <3400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck5: BUCK5{
- regulator-name = "BUCK5";
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <3400000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- buck6: BUCK6 {
- regulator-name = "BUCK6";
- regulator-min-microvolt = <1060000>;
- regulator-max-microvolt = <1140000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1: LDO1 {
- regulator-name = "LDO1";
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <1980000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo4: LDO4 {
- regulator-name = "LDO4";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <840000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo5: LDO5 {
- regulator-name = "LDO5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-};
-
-&lpi2c3 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lpi2c3>;
- status = "okay";
-
- pcf2131: rtc@53 {
- compatible = "nxp,pcf2131";
- reg = <0x53>;
- interrupt-parent = <&pcal6524>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
- };
-};
-
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
--
2.37.1

2024-05-09 03:37:11

by Frank Li

Subject: Re: [PATCH] arm64: dts: imx93-11x11-evk: reoder lpi2c2 and lpi2c3 label

On Thu, May 09, 2024 at 09:57:08AM +0800, Joy Zou wrote:
> Reorder lpi2c2 and lpi2c3 label in alphabetical order.
>
> Signed-off-by: Joy Zou <[email protected]>

Reviewed-by: Frank Li <[email protected]>

> ---
> .../boot/dts/freescale/imx93-11x11-evk.dts | 217 +++++++++---------
> 1 file changed, 105 insertions(+), 112 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> index d400d85f42a9..6be1eb920c02 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> @@ -105,6 +105,104 @@ &mu2 {
> status = "okay";
> };
>
> +&lpi2c2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clock-frequency = <400000>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&pinctrl_lpi2c2>;
> + pinctrl-1 = <&pinctrl_lpi2c2>;
> + status = "okay";
> +
> + pcal6524: gpio@22 {
> + compatible = "nxp,pcal6524";
> + reg = <0x22>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcal6524>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + pmic@25 {
> + compatible = "nxp,pca9451a";
> + reg = <0x25>;
> + interrupt-parent = <&pcal6524>;
> + interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> +
> + regulators {
> + buck1: BUCK1 {
> + regulator-name = "BUCK1";
> + regulator-min-microvolt = <610000>;
> + regulator-max-microvolt = <950000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <3125>;
> + };
> +
> + buck2: BUCK2 {
> + regulator-name = "BUCK2";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <670000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <3125>;
> + };
> +
> + buck4: BUCK4{
> + regulator-name = "BUCK4";
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck5: BUCK5{
> + regulator-name = "BUCK5";
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck6: BUCK6 {
> + regulator-name = "BUCK6";
> + regulator-min-microvolt = <1060000>;
> + regulator-max-microvolt = <1140000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo1: LDO1 {
> + regulator-name = "LDO1";
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <1980000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo4: LDO4 {
> + regulator-name = "LDO4";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <840000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo5: LDO5 {
> + regulator-name = "LDO5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> &lpi2c3 {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -113,6 +211,13 @@ &lpi2c3 {
> pinctrl-0 = <&pinctrl_lpi2c3>;
> status = "okay";
>
> + pcf2131: rtc@53 {
> + compatible = "nxp,pcf2131";
> + reg = <0x53>;
> + interrupt-parent = <&pcal6524>;
> + interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> + };
> +
> ptn5110: tcpc@50 {
> compatible = "nxp,ptn5110", "tcpci";
> reg = <0x50>;
> @@ -304,118 +409,6 @@ &wdog3 {
> status = "okay";
> };
>
> -&lpi2c2 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - clock-frequency = <400000>;
> - pinctrl-names = "default", "sleep";
> - pinctrl-0 = <&pinctrl_lpi2c2>;
> - pinctrl-1 = <&pinctrl_lpi2c2>;
> - status = "okay";
> -
> - pcal6524: gpio@22 {
> - compatible = "nxp,pcal6524";
> - reg = <0x22>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_pcal6524>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - interrupt-parent = <&gpio3>;
> - interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> - };
> -
> - pmic@25 {
> - compatible = "nxp,pca9451a";
> - reg = <0x25>;
> - interrupt-parent = <&pcal6524>;
> - interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> -
> - regulators {
> - buck1: BUCK1 {
> - regulator-name = "BUCK1";
> - regulator-min-microvolt = <610000>;
> - regulator-max-microvolt = <950000>;
> - regulator-boot-on;
> - regulator-always-on;
> - regulator-ramp-delay = <3125>;
> - };
> -
> - buck2: BUCK2 {
> - regulator-name = "BUCK2";
> - regulator-min-microvolt = <600000>;
> - regulator-max-microvolt = <670000>;
> - regulator-boot-on;
> - regulator-always-on;
> - regulator-ramp-delay = <3125>;
> - };
> -
> - buck4: BUCK4{
> - regulator-name = "BUCK4";
> - regulator-min-microvolt = <1620000>;
> - regulator-max-microvolt = <3400000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - buck5: BUCK5{
> - regulator-name = "BUCK5";
> - regulator-min-microvolt = <1620000>;
> - regulator-max-microvolt = <3400000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - buck6: BUCK6 {
> - regulator-name = "BUCK6";
> - regulator-min-microvolt = <1060000>;
> - regulator-max-microvolt = <1140000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo1: LDO1 {
> - regulator-name = "LDO1";
> - regulator-min-microvolt = <1620000>;
> - regulator-max-microvolt = <1980000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo4: LDO4 {
> - regulator-name = "LDO4";
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <840000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo5: LDO5 {
> - regulator-name = "LDO5";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> - };
> - };
> -};
> -
> -&lpi2c3 {
> - clock-frequency = <400000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lpi2c3>;
> - status = "okay";
> -
> - pcf2131: rtc@53 {
> - compatible = "nxp,pcf2131";
> - reg = <0x53>;
> - interrupt-parent = <&pcal6524>;
> - interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> - };
> -};
> -
> &iomuxc {
> pinctrl_eqos: eqosgrp {
> fsl,pins = <
> --
> 2.37.1
>

2024-06-15 07:35:02

by Shawn Guo

Subject: Re: [PATCH] arm64: dts: imx93-11x11-evk: reoder lpi2c2 and lpi2c3 label

On Thu, May 09, 2024 at 09:57:08AM +0800, Joy Zou wrote:
> Reorder lpi2c2 and lpi2c3 label in alphabetical order.
>
> Signed-off-by: Joy Zou <[email protected]>
> ---
> .../boot/dts/freescale/imx93-11x11-evk.dts | 217 +++++++++---------
> 1 file changed, 105 insertions(+), 112 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> index d400d85f42a9..6be1eb920c02 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> @@ -105,6 +105,104 @@ &mu2 {
> status = "okay";
> };
>
> +&lpi2c2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clock-frequency = <400000>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&pinctrl_lpi2c2>;
> + pinctrl-1 = <&pinctrl_lpi2c2>;
> + status = "okay";
> +
> + pcal6524: gpio@22 {
> + compatible = "nxp,pcal6524";
> + reg = <0x22>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcal6524>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + pmic@25 {
> + compatible = "nxp,pca9451a";
> + reg = <0x25>;
> + interrupt-parent = <&pcal6524>;
> + interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> +
> + regulators {
> + buck1: BUCK1 {
> + regulator-name = "BUCK1";
> + regulator-min-microvolt = <610000>;
> + regulator-max-microvolt = <950000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <3125>;
> + };
> +
> + buck2: BUCK2 {
> + regulator-name = "BUCK2";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <670000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <3125>;
> + };
> +
> + buck4: BUCK4{
> + regulator-name = "BUCK4";
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck5: BUCK5{
> + regulator-name = "BUCK5";
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck6: BUCK6 {
> + regulator-name = "BUCK6";
> + regulator-min-microvolt = <1060000>;
> + regulator-max-microvolt = <1140000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo1: LDO1 {
> + regulator-name = "LDO1";
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <1980000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo4: LDO4 {
> + regulator-name = "LDO4";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <840000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo5: LDO5 {
> + regulator-name = "LDO5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> &lpi2c3 {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -113,6 +211,13 @@ &lpi2c3 {
> pinctrl-0 = <&pinctrl_lpi2c3>;
> status = "okay";
>
> + pcf2131: rtc@53 {
> + compatible = "nxp,pcf2131";
> + reg = <0x53>;
> + interrupt-parent = <&pcal6524>;
> + interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> + };
> +
> ptn5110: tcpc@50 {

The child devices with @unit-address should be order in the
unit-address.

Shawn

> compatible = "nxp,ptn5110", "tcpci";
> reg = <0x50>;
> @@ -304,118 +409,6 @@ &wdog3 {
> status = "okay";
> };
>
> -&lpi2c2 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - clock-frequency = <400000>;
> - pinctrl-names = "default", "sleep";
> - pinctrl-0 = <&pinctrl_lpi2c2>;
> - pinctrl-1 = <&pinctrl_lpi2c2>;
> - status = "okay";
> -
> - pcal6524: gpio@22 {
> - compatible = "nxp,pcal6524";
> - reg = <0x22>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_pcal6524>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - interrupt-parent = <&gpio3>;
> - interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> - };
> -
> - pmic@25 {
> - compatible = "nxp,pca9451a";
> - reg = <0x25>;
> - interrupt-parent = <&pcal6524>;
> - interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> -
> - regulators {
> - buck1: BUCK1 {
> - regulator-name = "BUCK1";
> - regulator-min-microvolt = <610000>;
> - regulator-max-microvolt = <950000>;
> - regulator-boot-on;
> - regulator-always-on;
> - regulator-ramp-delay = <3125>;
> - };
> -
> - buck2: BUCK2 {
> - regulator-name = "BUCK2";
> - regulator-min-microvolt = <600000>;
> - regulator-max-microvolt = <670000>;
> - regulator-boot-on;
> - regulator-always-on;
> - regulator-ramp-delay = <3125>;
> - };
> -
> - buck4: BUCK4{
> - regulator-name = "BUCK4";
> - regulator-min-microvolt = <1620000>;
> - regulator-max-microvolt = <3400000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - buck5: BUCK5{
> - regulator-name = "BUCK5";
> - regulator-min-microvolt = <1620000>;
> - regulator-max-microvolt = <3400000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - buck6: BUCK6 {
> - regulator-name = "BUCK6";
> - regulator-min-microvolt = <1060000>;
> - regulator-max-microvolt = <1140000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo1: LDO1 {
> - regulator-name = "LDO1";
> - regulator-min-microvolt = <1620000>;
> - regulator-max-microvolt = <1980000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo4: LDO4 {
> - regulator-name = "LDO4";
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <840000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> -
> - ldo5: LDO5 {
> - regulator-name = "LDO5";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-boot-on;
> - regulator-always-on;
> - };
> - };
> - };
> -};
> -
> -&lpi2c3 {
> - clock-frequency = <400000>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lpi2c3>;
> - status = "okay";
> -
> - pcf2131: rtc@53 {
> - compatible = "nxp,pcf2131";
> - reg = <0x53>;
> - interrupt-parent = <&pcal6524>;
> - interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> - };
> -};
> -
> &iomuxc {
> pinctrl_eqos: eqosgrp {
> fsl,pins = <
> --
> 2.37.1
>