From: Vignesh Raghavendra <[email protected]>
Unlike other channel counts in CAPx registers, BCDMA BCHAN CNT doesn't
include UHC and HC BC channels. So include them explicitly to arrive at
total BC channel in the instance.
Fixes: 017794739702 ("dmaengine: ti: k3-udma: Initial support for K3 BCDMA")
Signed-off-by: Vignesh Raghavendra <[email protected]>
Signed-off-by: Jai Luthra <[email protected]>
---
drivers/dma/ti/k3-udma.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index 6400d06588a2..710296dfd0ae 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -4473,6 +4473,7 @@ static int udma_get_mmrs(struct platform_device *pdev, struct udma_dev *ud)
break;
case DMA_TYPE_BCDMA:
ud->bchan_cnt = BCDMA_CAP2_BCHAN_CNT(cap2);
+ ud->bchan_cnt += BCDMA_CAP3_HBCHAN_CNT(cap3) + BCDMA_CAP3_UBCHAN_CNT(cap3);
ud->tchan_cnt = BCDMA_CAP2_TCHAN_CNT(cap2);
ud->rchan_cnt = BCDMA_CAP2_RCHAN_CNT(cap2);
ud->rflow_cnt = ud->rchan_cnt;
---
base-commit: d97496ca23a2d4ee80b7302849404859d9058bcd
change-id: 20240604-bcdma_chan_cnt-bbc6c0c95259
Best regards,
--
Jai Luthra <[email protected]>
On 6/4/24 12:51 PM, Jai Luthra wrote:
> From: Vignesh Raghavendra <[email protected]>
>
> Unlike other channel counts in CAPx registers, BCDMA BCHAN CNT doesn't
> include UHC and HC BC channels.
Oh, it does not?
Back at the time of 017794739702 there were no devices with H/U BCHAN...
> So include them explicitly to arrive at
> total BC channel in the instance.
>
> Fixes: 017794739702 ("dmaengine: ti: k3-udma: Initial support for K3 BCDMA")
> Signed-off-by: Vignesh Raghavendra <[email protected]>
> Signed-off-by: Jai Luthra <[email protected]>
> ---
> drivers/dma/ti/k3-udma.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
> index 6400d06588a2..710296dfd0ae 100644
> --- a/drivers/dma/ti/k3-udma.c
> +++ b/drivers/dma/ti/k3-udma.c
> @@ -4473,6 +4473,7 @@ static int udma_get_mmrs(struct platform_device *pdev, struct udma_dev *ud)
> break;
> case DMA_TYPE_BCDMA:
> ud->bchan_cnt = BCDMA_CAP2_BCHAN_CNT(cap2);
> + ud->bchan_cnt += BCDMA_CAP3_HBCHAN_CNT(cap3) + BCDMA_CAP3_UBCHAN_CNT(cap3);
I would add them in a single operation. Easier for the eye:
ud->bchan_cnt = BCDMA_CAP2_BCHAN_CNT(cap2) + BCDMA_CAP3_HBCHAN_CNT(cap3) +
BCDMA_CAP3_UBCHAN_CNT(cap3);
> ud->tchan_cnt = BCDMA_CAP2_TCHAN_CNT(cap2);
> ud->rchan_cnt = BCDMA_CAP2_RCHAN_CNT(cap2);
> ud->rflow_cnt = ud->rchan_cnt;
>
> ---
> base-commit: d97496ca23a2d4ee80b7302849404859d9058bcd
> change-id: 20240604-bcdma_chan_cnt-bbc6c0c95259
>
> Best regards,
--
Péter