>From d2e53f3c71afa8ffa93a748d15efb9b5d25b9b1b Mon Sep 17 00:00:00 2001
From: Andres Salomon <[email protected]>
Date: Tue, 26 Feb 2008 05:00:42 -0500
Subject: [PATCH] gxfb: add power management functionality
This adds the ability to suspend/resume the gxfb driver, which includes:
- The addition of a Graphics Processor register table in gxfb.h, and
associated GP handling.
- Register and palette saving code; registers are stored in gxfb_par.
A few MSR values are saved as well.
- gx_powerup and gx_powerdown functions which restore/save registers and
enable/disable graphic engines.
- gxfb_suspend/gxfb_resume
Originally based on a patch by Jordan Crouse.
Signed-off-by: Andres Salomon <[email protected]>
---
drivers/video/geode/Makefile | 2 +-
drivers/video/geode/gxfb.h | 64 +++++++++
drivers/video/geode/gxfb_core.c | 63 +++++++++
drivers/video/geode/suspend_gx.c | 264 ++++++++++++++++++++++++++++++++++++++
4 files changed, 392 insertions(+), 1 deletions(-)
create mode 100644 drivers/video/geode/suspend_gx.c
diff --git a/drivers/video/geode/Makefile b/drivers/video/geode/Makefile
index 957304b..5c98da1 100644
--- a/drivers/video/geode/Makefile
+++ b/drivers/video/geode/Makefile
@@ -5,5 +5,5 @@ obj-$(CONFIG_FB_GEODE_GX) += gxfb.o
obj-$(CONFIG_FB_GEODE_LX) += lxfb.o
gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o
-gxfb-objs := gxfb_core.o display_gx.o video_gx.o
+gxfb-objs := gxfb_core.o display_gx.o video_gx.o suspend_gx.o
lxfb-objs := lxfb_core.o lxfb_ops.o
diff --git a/drivers/video/geode/gxfb.h b/drivers/video/geode/gxfb.h
index ec7d526..56789bc 100644
--- a/drivers/video/geode/gxfb.h
+++ b/drivers/video/geode/gxfb.h
@@ -11,10 +11,34 @@
#ifndef _GXFB_H_
#define _GXFB_H_
+#define GP_REG_COUNT (0x50 / 4)
+#define DC_REG_COUNT (0x90 / 4)
+#define VP_REG_COUNT (0x138 / 8)
+#define FP_REG_COUNT (0x68 / 8)
+
+#define DC_PAL_COUNT 0x104
+
struct gxfb_par {
int enable_crt;
void __iomem *dc_regs;
void __iomem *vid_regs;
+ void __iomem *gp_regs;
+#ifdef CONFIG_PM
+ int powered_down;
+
+ /* register state, for power management functionality */
+ struct {
+ uint64_t padsel;
+ uint64_t dotpll;
+ } msr;
+
+ uint32_t gp[GP_REG_COUNT];
+ uint32_t dc[DC_REG_COUNT];
+ uint64_t vp[VP_REG_COUNT];
+ uint64_t fp[FP_REG_COUNT];
+
+ uint32_t pal[DC_PAL_COUNT];
+#endif
};
unsigned int gx_frame_buffer_size(void);
@@ -27,6 +51,43 @@ void gx_set_dclk_frequency(struct fb_info *info);
void gx_configure_display(struct fb_info *info);
int gx_blank_display(struct fb_info *info, int blank_mode);
+#ifdef CONFIG_PM
+int gx_powerdown(struct fb_info *info);
+int gx_powerup(struct fb_info *info);
+#endif
+
+
+/* Graphics Processor registers (table 6-23 from the data book) */
+enum gp_registers {
+ GP_DST_OFFSET = 0,
+ GP_SRC_OFFSET,
+ GP_STRIDE,
+ GP_WID_HEIGHT,
+
+ GP_SRC_COLOR_FG,
+ GP_SRC_COLOR_BG,
+ GP_PAT_COLOR_0,
+ GP_PAT_COLOR_1,
+
+ GP_PAT_COLOR_2,
+ GP_PAT_COLOR_3,
+ GP_PAT_COLOR_4,
+ GP_PAT_COLOR_5,
+
+ GP_PAT_DATA_0,
+ GP_PAT_DATA_1,
+ GP_RASTER_MODE,
+ GP_VECTOR_MODE,
+
+ GP_BLT_MODE,
+ GP_BLT_STATUS,
+ GP_HST_SRC,
+ GP_BASE_OFFSET, /* 0x4c */
+};
+
+#define GP_BLT_STATUS_BLT_PENDING (1 << 2)
+#define GP_BLT_STATUS_BLT_BUSY (1 << 0)
+
/* Display Controller registers (table 6-38 from the data book) */
enum dc_registers {
@@ -236,6 +297,9 @@ enum fp_registers {
/* register access functions */
+#define read_gp(reg) readl(par->gp_regs + 4*(reg))
+#define write_gp(reg, val) writel((val), par->gp_regs + 4*(reg))
+
#define read_dc(reg) readl(par->dc_regs + 4*(reg))
#define write_dc(reg, val) writel((val), par->dc_regs + 4*(reg))
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index 12a9382..02d1ede 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -28,6 +28,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
+#include <linux/console.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/geode.h>
@@ -222,6 +223,15 @@ static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *de
if (!par->dc_regs)
return -ENOMEM;
+ ret = pci_request_region(dev, 1, "gxfb (graphics processor)");
+ if (ret < 0)
+ return ret;
+ par->gp_regs = ioremap(pci_resource_start(dev, 1),
+ pci_resource_len(dev, 1));
+
+ if (!par->gp_regs)
+ return -ENOMEM;
+
ret = pci_request_region(dev, 0, "gxfb (framebuffer)");
if (ret < 0)
return ret;
@@ -295,6 +305,48 @@ static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
return info;
}
+#ifdef CONFIG_PM
+static int gxfb_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct fb_info *info = pci_get_drvdata(pdev);
+
+ if (pdev->dev.power.power_state.event == state.event)
+ return 0;
+
+ if (state.event == PM_EVENT_SUSPEND) {
+ acquire_console_sem();
+ gx_powerdown(info);
+ fb_set_suspend(info, 1);
+ release_console_sem();
+ }
+
+ /* there's no point in setting PCI states; we emulate PCI, so
+ * we don't end up getting power savings anyways */
+
+ pdev->dev.power.power_state = state;
+ return 0;
+}
+
+static int gxfb_resume(struct pci_dev *pdev)
+{
+ struct fb_info *info = pci_get_drvdata(pdev);
+ int ret;
+
+ acquire_console_sem();
+ ret = gx_powerup(info);
+ if (ret) {
+ printk(KERN_ERR "gxfb: power up failed!\n");
+ return ret;
+ }
+
+ fb_set_suspend(info, 0);
+ release_console_sem();
+
+ pdev->dev.power.power_state = PMSG_ON;
+ return 0;
+}
+#endif
+
static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct gxfb_par *par;
@@ -357,6 +409,10 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i
iounmap(par->dc_regs);
pci_release_region(pdev, 2);
}
+ if (par->gp_regs) {
+ iounmap(par->gp_regs);
+ pci_release_region(pdev, 1);
+ }
if (info)
framebuffer_release(info);
@@ -379,6 +435,9 @@ static void gxfb_remove(struct pci_dev *pdev)
iounmap(par->dc_regs);
pci_release_region(pdev, 2);
+ iounmap(par->gp_regs);
+ pci_release_region(pdev, 1);
+
pci_set_drvdata(pdev, NULL);
framebuffer_release(info);
@@ -396,6 +455,10 @@ static struct pci_driver gxfb_driver = {
.id_table = gxfb_id_table,
.probe = gxfb_probe,
.remove = gxfb_remove,
+#ifdef CONFIG_PM
+ .suspend = gxfb_suspend,
+ .resume = gxfb_resume,
+#endif
};
#ifndef MODULE
diff --git a/drivers/video/geode/suspend_gx.c b/drivers/video/geode/suspend_gx.c
new file mode 100644
index 0000000..0f79e5c
--- /dev/null
+++ b/drivers/video/geode/suspend_gx.c
@@ -0,0 +1,264 @@
+/*
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ * Copyright (C) 2008 Andres Salomon <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/fb.h>
+#include <asm/io.h>
+#include <asm/msr.h>
+#include <asm/geode.h>
+#include <asm/delay.h>
+
+#include "gxfb.h"
+
+#ifdef CONFIG_PM
+
+static void gx_save_regs(struct gxfb_par *par)
+{
+ int i;
+
+ /* wait for the BLT engine to stop being busy */
+ do {
+ i = read_gp(GP_BLT_STATUS);
+ } while (i & (GP_BLT_STATUS_BLT_PENDING | GP_BLT_STATUS_BLT_BUSY));
+
+ /* save MSRs */
+ rdmsrl(MSR_GX_MSR_PADSEL, par->msr.padsel);
+ rdmsrl(MSR_GLCP_DOTPLL, par->msr.dotpll);
+
+ write_dc(DC_UNLOCK, DC_UNLOCK_UNLOCK);
+
+ /* save registers */
+ memcpy(par->gp, par->gp_regs, sizeof(par->gp));
+ memcpy(par->dc, par->dc_regs, sizeof(par->dc));
+ memcpy(par->vp, par->vid_regs, sizeof(par->vp));
+ memcpy(par->fp, par->vid_regs + VP_FP_START, sizeof(par->fp));
+
+ /* save the palette */
+ write_gp(DC_PAL_ADDRESS, 0);
+ for (i = 0; i < ARRAY_SIZE(par->pal); i++)
+ par->pal[i] = read_dc(DC_PAL_DATA);
+}
+
+static void gx_set_dotpll(uint32_t dotpll_hi)
+{
+ uint32_t dotpll_lo;
+ int i;
+
+ rdmsrl(MSR_GLCP_DOTPLL, dotpll_lo);
+ dotpll_lo |= MSR_GLCP_DOTPLL_DOTRESET;
+ dotpll_lo &= ~MSR_GLCP_DOTPLL_BYPASS;
+ wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+
+ /* wait for the PLL to lock */
+ for (i = 0; i < 200; i++) {
+ rdmsrl(MSR_GLCP_DOTPLL, dotpll_lo);
+ if (dotpll_lo & MSR_GLCP_DOTPLL_LOCK)
+ break;
+ udelay(1);
+ }
+
+ /* PLL set, unlock */
+ dotpll_lo &= ~MSR_GLCP_DOTPLL_DOTRESET;
+ wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+}
+
+static void gx_restore_gfx_proc(struct gxfb_par *par)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(par->gp); i++) {
+ switch (i) {
+ case GP_RASTER_MODE:
+ case GP_VECTOR_MODE:
+ case GP_BLT_MODE:
+ case GP_BLT_STATUS:
+ /* don't restore these registers */
+ break;
+ default:
+ write_gp(i, par->gp[i]);
+ }
+ }
+}
+
+static void gx_restore_display_ctlr(struct gxfb_par *par)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(par->dc); i++) {
+ switch (i) {
+ case DC_UNLOCK:
+ /* unlock the DC; runs first */
+ write_dc(DC_UNLOCK, DC_UNLOCK_UNLOCK);
+ break;
+
+ case DC_GENERAL_CFG:
+ /* write without the enables */
+ write_dc(i, par->dc[i] & ~(DC_GENERAL_CFG_VIDE |
+ DC_GENERAL_CFG_ICNE |
+ DC_GENERAL_CFG_CURE |
+ DC_GENERAL_CFG_DFLE));
+ break;
+
+ case DC_DISPLAY_CFG:
+ /* write without the enables */
+ write_dc(i, par->dc[i] & ~(DC_DISPLAY_CFG_VDEN |
+ DC_DISPLAY_CFG_GDEN |
+ DC_DISPLAY_CFG_TGEN));
+ break;
+
+ case DC_RSVD_0:
+ case DC_RSVD_1:
+ case DC_RSVD_2:
+ case DC_RSVD_3:
+ case DC_RSVD_4:
+ case DC_LINE_CNT:
+ case DC_PAL_ADDRESS:
+ case DC_PAL_DATA:
+ case DC_DFIFO_DIAG:
+ case DC_CFIFO_DIAG:
+ case DC_RSVD_5:
+ /* don't restore these registers */
+ break;
+ default:
+ write_dc(i, par->dc[i]);
+ }
+ }
+
+ /* restore the palette */
+ write_gp(DC_PAL_ADDRESS, 0);
+ for (i = 0; i < ARRAY_SIZE(par->pal); i++)
+ write_dc(DC_PAL_DATA, par->pal[i]);
+}
+
+static void gx_restore_video_proc(struct gxfb_par *par)
+{
+ int i;
+
+ wrmsrl(MSR_GX_MSR_PADSEL, par->msr.padsel);
+
+ for (i = 0; i < ARRAY_SIZE(par->vp); i++) {
+ switch (i) {
+ case VP_VCFG:
+ /* don't enable video yet */
+ write_vp(i, par->vp[i] & ~VP_VCFG_VID_EN);
+ break;
+
+ case VP_DCFG:
+ /* don't enable CRT yet */
+ write_vp(i, par->vp[i] &
+ ~(VP_DCFG_DAC_BL_EN | VP_DCFG_VSYNC_EN |
+ VP_DCFG_HSYNC_EN | VP_DCFG_CRT_EN));
+ break;
+
+ case VP_GAR:
+ case VP_GDR:
+ case VP_RSVD_0:
+ case VP_RSVD_1:
+ case VP_RSVD_2:
+ case VP_RSVD_3:
+ case VP_CRC32:
+ case VP_AWT:
+ case VP_VTM: /* this is r/w, shouldn't we restore? -dil */
+ /* don't restore these registers */
+ break;
+ default:
+ write_vp(i, par->vp[i]);
+ }
+ }
+}
+
+static void gx_restore_regs(struct gxfb_par *par)
+{
+ int i;
+
+ gx_set_dotpll((uint32_t) (par->msr.dotpll >> 32));
+ gx_restore_gfx_proc(par);
+ gx_restore_display_ctlr(par);
+ gx_restore_video_proc(par);
+
+ /* Flat Panel */
+ for (i = 0; i < ARRAY_SIZE(par->fp); i++) {
+ if (i != FP_PM && i != FP_RSVD_0)
+ write_fp(i, par->fp[i]);
+ }
+}
+
+static void gx_disable_graphics(struct gxfb_par *par)
+{
+ /* shut down the engine */
+ write_vp(VP_VCFG, par->vp[VP_VCFG] & ~VP_VCFG_VID_EN);
+ write_vp(VP_DCFG, par->vp[VP_DCFG] & ~(VP_DCFG_DAC_BL_EN |
+ VP_DCFG_VSYNC_EN | VP_DCFG_HSYNC_EN | VP_DCFG_CRT_EN));
+
+ /* turn off the flat panel */
+ write_fp(FP_PM, par->fp[FP_PM] & ~FP_PM_P);
+
+
+ /* turn off display */
+ write_dc(DC_UNLOCK, DC_UNLOCK_UNLOCK);
+ write_dc(DC_GENERAL_CFG, par->dc[DC_GENERAL_CFG] &
+ ~(DC_GENERAL_CFG_VIDE | DC_GENERAL_CFG_ICNE |
+ DC_GENERAL_CFG_CURE | DC_GENERAL_CFG_DFLE));
+ write_dc(DC_DISPLAY_CFG, par->dc[DC_DISPLAY_CFG] &
+ ~(DC_DISPLAY_CFG_VDEN | DC_DISPLAY_CFG_GDEN |
+ DC_DISPLAY_CFG_TGEN));
+ write_dc(DC_UNLOCK, DC_UNLOCK_LOCK);
+}
+
+static void gx_enable_graphics(struct gxfb_par *par)
+{
+ if (par->fp[FP_PM] & FP_PM_P) {
+ /* power on the panel if not already power{ed,ing} on */
+ if (!(read_fp(FP_PM) & (FP_PM_PANEL_ON|FP_PM_PANEL_PWR_UP)))
+ write_fp(FP_PM, par->fp[FP_PM]);
+ } else {
+ /* power down the panel if not already power{ed,ing} down */
+ if (!(read_fp(FP_PM) & (FP_PM_PANEL_OFF|FP_PM_PANEL_PWR_DOWN)))
+ write_fp(FP_PM, par->fp[FP_PM]);
+ }
+
+ /* turn everything on */
+ write_vp(VP_VCFG, par->vp[VP_VCFG]);
+ write_vp(VP_DCFG, par->vp[VP_DCFG]);
+ write_dc(DC_DISPLAY_CFG, par->dc[DC_DISPLAY_CFG]);
+ /* do this last; it will enable the FIFO load */
+ write_dc(DC_GENERAL_CFG, par->dc[DC_GENERAL_CFG]);
+
+ /* lock the door behind us */
+ write_dc(DC_UNLOCK, DC_UNLOCK_LOCK);
+}
+
+int gx_powerdown(struct fb_info *info)
+{
+ struct gxfb_par *par = info->par;
+
+ if (par->powered_down)
+ return 0;
+
+ gx_save_regs(par);
+ gx_disable_graphics(par);
+
+ par->powered_down = 1;
+ return 0;
+}
+
+int gx_powerup(struct fb_info *info)
+{
+ struct gxfb_par *par = info->par;
+
+ if (!par->powered_down)
+ return 0;
+
+ gx_restore_regs(par);
+ gx_enable_graphics(par);
+
+ par->powered_down = 0;
+ return 0;
+}
+
+#endif
--
1.5.3.7