This patch removes the dead CONFIG_TTY_LOG (no kconfig option).
Reported-by: Robert P. J. Day <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>
---
This patch has been sent on:
- 21 May 2008
arch/um/kernel/exec.c | 12 --
arch/um/os-Linux/Makefile | 3
arch/um/os-Linux/tty_log.c | 217 -------------------------------------
3 files changed, 232 deletions(-)
531b7c113d8deed217fb800cdd3f610899fbc0d9 diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index f5d7f45..598711c 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -42,23 +42,11 @@ void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp)
PT_REGS_SP(regs) = esp;
}
-#ifdef CONFIG_TTY_LOG
-extern void log_exec(char **argv, void *tty);
-#endif
-
static long execve1(char *file, char __user * __user *argv,
char __user *__user *env)
{
long error;
-#ifdef CONFIG_TTY_LOG
- struct tty_struct *tty;
- mutex_lock(&tty_mutex);
- tty = get_current_tty();
- if (tty)
- log_exec(argv, tty);
- mutex_unlock(&tty_mutex);
-#endif
error = do_execve(file, argv, env, ¤t->thread.regs);
if (error == 0) {
task_lock(current);
diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile
index 8a48d6a..d66f038 100644
--- a/arch/um/os-Linux/Makefile
+++ b/arch/um/os-Linux/Makefile
@@ -7,9 +7,6 @@ obj-y = aio.o elf_aux.o execvp.o file.o helper.o irq.o main.o mem.o process.o \
registers.o sigio.o signal.o start_up.o time.o tty.o uaccess.o \
umid.o tls.o user_syms.o util.o drivers/ sys-$(SUBARCH)/ skas/
-obj-$(CONFIG_TTY_LOG) += tty_log.o
-user-objs-$(CONFIG_TTY_LOG) += tty_log.o
-
USER_OBJS := $(user-objs-y) aio.o elf_aux.o execvp.o file.o helper.o irq.o \
main.o mem.o process.o registers.o sigio.o signal.o start_up.o time.o \
tty.o tls.o uaccess.o umid.o util.o
diff --git a/arch/um/os-Linux/tty_log.c b/arch/um/os-Linux/tty_log.c
deleted file mode 100644
index cc648e6..0000000
--- a/arch/um/os-Linux/tty_log.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike ([email protected]) and
- * geoffrey hing <[email protected]>
- * Licensed under the GPL
- */
-
-#include <errno.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/time.h>
-#include "init.h"
-#include "user.h"
-#include "os.h"
-
-#define TTY_LOG_DIR "./"
-
-/* Set early in boot and then unchanged */
-static char *tty_log_dir = TTY_LOG_DIR;
-static int tty_log_fd = -1;
-
-#define TTY_LOG_OPEN 1
-#define TTY_LOG_CLOSE 2
-#define TTY_LOG_WRITE 3
-#define TTY_LOG_EXEC 4
-
-#define TTY_READ 1
-#define TTY_WRITE 2
-
-struct tty_log_buf {
- int what;
- unsigned long tty;
- int len;
- int direction;
- unsigned long sec;
- unsigned long usec;
-};
-
-int open_tty_log(void *tty, void *current_tty)
-{
- struct timeval tv;
- struct tty_log_buf data;
- char buf[strlen(tty_log_dir) + sizeof("01234567890-01234567\0")];
- int fd;
-
- gettimeofday(&tv, NULL);
- if(tty_log_fd != -1){
- data = ((struct tty_log_buf) { .what = TTY_LOG_OPEN,
- .tty = (unsigned long) tty,
- .len = sizeof(current_tty),
- .direction = 0,
- .sec = tv.tv_sec,
- .usec = tv.tv_usec } );
- write(tty_log_fd, &data, sizeof(data));
- write(tty_log_fd, ¤t_tty, data.len);
- return tty_log_fd;
- }
-
- sprintf(buf, "%s/%0u-%0u", tty_log_dir, (unsigned int) tv.tv_sec,
- (unsigned int) tv.tv_usec);
-
- fd = os_open_file(buf, of_append(of_create(of_rdwr(OPENFLAGS()))),
- 0644);
- if(fd < 0){
- printk("open_tty_log : couldn't open '%s', errno = %d\n",
- buf, -fd);
- }
- return fd;
-}
-
-void close_tty_log(int fd, void *tty)
-{
- struct tty_log_buf data;
- struct timeval tv;
-
- if(tty_log_fd != -1){
- gettimeofday(&tv, NULL);
- data = ((struct tty_log_buf) { .what = TTY_LOG_CLOSE,
- .tty = (unsigned long) tty,
- .len = 0,
- .direction = 0,
- .sec = tv.tv_sec,
- .usec = tv.tv_usec } );
- write(tty_log_fd, &data, sizeof(data));
- return;
- }
- os_close_file(fd);
-}
-
-static int log_chunk(int fd, const char *buf, int len)
-{
- int total = 0, try, missed, n;
- char chunk[64];
-
- while(len > 0){
- try = (len > sizeof(chunk)) ? sizeof(chunk) : len;
- missed = copy_from_user_proc(chunk, (char *) buf, try);
- try -= missed;
- n = write(fd, chunk, try);
- if(n != try) {
- if(n < 0)
- return -errno;
- return -EIO;
- }
- if(missed != 0)
- return -EFAULT;
-
- len -= try;
- total += try;
- buf += try;
- }
-
- return total;
-}
-
-int write_tty_log(int fd, const char *buf, int len, void *tty, int is_read)
-{
- struct timeval tv;
- struct tty_log_buf data;
- int direction;
-
- if(fd == tty_log_fd){
- gettimeofday(&tv, NULL);
- direction = is_read ? TTY_READ : TTY_WRITE;
- data = ((struct tty_log_buf) { .what = TTY_LOG_WRITE,
- .tty = (unsigned long) tty,
- .len = len,
- .direction = direction,
- .sec = tv.tv_sec,
- .usec = tv.tv_usec } );
- write(tty_log_fd, &data, sizeof(data));
- }
-
- return log_chunk(fd, buf, len);
-}
-
-void log_exec(char **argv, void *tty)
-{
- struct timeval tv;
- struct tty_log_buf data;
- char **ptr,*arg;
- int len;
-
- if(tty_log_fd == -1) return;
-
- gettimeofday(&tv, NULL);
-
- len = 0;
- for(ptr = argv; ; ptr++){
- if(copy_from_user_proc(&arg, ptr, sizeof(arg)))
- return;
- if(arg == NULL) break;
- len += strlen_user_proc(arg);
- }
-
- data = ((struct tty_log_buf) { .what = TTY_LOG_EXEC,
- .tty = (unsigned long) tty,
- .len = len,
- .direction = 0,
- .sec = tv.tv_sec,
- .usec = tv.tv_usec } );
- write(tty_log_fd, &data, sizeof(data));
-
- for(ptr = argv; ; ptr++){
- if(copy_from_user_proc(&arg, ptr, sizeof(arg)))
- return;
- if(arg == NULL) break;
- log_chunk(tty_log_fd, arg, strlen_user_proc(arg));
- }
-}
-
-extern void register_tty_logger(int (*opener)(void *, void *),
- int (*writer)(int, const char *, int,
- void *, int),
- void (*closer)(int, void *));
-
-static int register_logger(void)
-{
- register_tty_logger(open_tty_log, write_tty_log, close_tty_log);
- return 0;
-}
-
-__uml_initcall(register_logger);
-
-static int __init set_tty_log_dir(char *name, int *add)
-{
- tty_log_dir = name;
- return 0;
-}
-
-__uml_setup("tty_log_dir=", set_tty_log_dir,
-"tty_log_dir=<directory>\n"
-" This is used to specify the directory where the logs of all pty\n"
-" data from this UML machine will be written.\n\n"
-);
-
-static int __init set_tty_log_fd(char *name, int *add)
-{
- char *end;
-
- tty_log_fd = strtoul(name, &end, 0);
- if((*end != '\0') || (end == name)){
- printf("set_tty_log_fd - strtoul failed on '%s'\n", name);
- tty_log_fd = -1;
- }
-
- *add = 0;
- return 0;
-}
-
-__uml_setup("tty_log_fd=", set_tty_log_fd,
-"tty_log_fd=<fd>\n"
-" This is used to specify a preconfigured file descriptor to which all\n"
-" tty data will be written. Preconfigure the descriptor with something\n"
-" like '10>tty_log tty_log_fd=10'.\n\n"
-);