This addresses a regression in that if a user specified an affinity
for an interrupt that affinity information would get reset between
a request_irq(), free_irq() and request_irq() for the same irq.
On example of this is bringing up an ethernet interface, taking
it down and bringing it back up again.
Instead of always using the irq_default_affinity we use the
previous setting of the IRQs affinity with the assumption that
at boot the IRQs affinity will be set to irq_default_affinity.
Signed-off-by: Kumar Gala <[email protected]>
---
reposting since the first patch I forgot to cull some header info from the
body of the emai.
- k
kernel/irq/manage.c | 7 +++++--
1 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index c498a1b..ea7d11b 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -115,9 +115,12 @@ int irq_select_affinity(unsigned int irq)
if (!irq_can_set_affinity(irq))
return 0;
- cpus_and(mask, cpu_online_map, irq_default_affinity);
-
desc = irq_to_desc(irq);
+
+ mask = desc->affinity;
+
+ cpus_and(mask, cpu_online_map, mask);
+
desc->affinity = mask;
desc->chip->set_affinity(irq, mask);
--
1.5.5.1