From: Carsten Otte <[email protected]>
This is a cleanup of all the messages this driver prints. It uses the
dev_message macros now.
Signed-off-by: Carsten Otte <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
---
drivers/s390/char/tape.h | 2
drivers/s390/char/tape_34xx.c | 155 +++++++----------
drivers/s390/char/tape_3590.c | 360 +++++++++++++++++++----------------------
drivers/s390/char/tape_block.c | 17 -
drivers/s390/char/tape_char.c | 7
drivers/s390/char/tape_core.c | 60 ------
drivers/s390/char/tape_proc.c | 3
drivers/s390/char/tape_std.c | 21 --
8 files changed, 254 insertions(+), 371 deletions(-)
Index: quilt-2.6/drivers/s390/char/tape_34xx.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/tape_34xx.c
+++ quilt-2.6/drivers/s390/char/tape_34xx.c
@@ -8,6 +8,8 @@
* Martin Schwidefsky <[email protected]>
*/
+#define KMSG_COMPONENT "tape"
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bio.h>
@@ -18,8 +20,6 @@
#include "tape.h"
#include "tape_std.h"
-#define PRINTK_HEADER "TAPE_34XX: "
-
/*
* Pointer to debug area.
*/
@@ -203,8 +203,7 @@ tape_34xx_unsolicited_irq(struct tape_de
tape_34xx_schedule_work(device, TO_MSEN);
} else {
DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id);
- PRINT_WARN("Unsolicited IRQ (Device End) caught.\n");
- tape_dump_sense(device, NULL, irb);
+ tape_dump_sense_dbf(device, NULL, irb);
}
return TAPE_IO_SUCCESS;
}
@@ -226,9 +225,7 @@ tape_34xx_erp_read_opposite(struct tape_
tape_std_read_backward(device, request);
return tape_34xx_erp_retry(request);
}
- if (request->op != TO_RBA)
- PRINT_ERR("read_opposite called with state:%s\n",
- tape_op_verbose[request->op]);
+
/*
* We tried to read forward and backward, but hat no
* success -> failed.
@@ -241,13 +238,10 @@ tape_34xx_erp_bug(struct tape_device *de
struct irb *irb, int no)
{
if (request->op != TO_ASSIGN) {
- PRINT_WARN("An unexpected condition #%d was caught in "
- "tape error recovery.\n", no);
- PRINT_WARN("Please report this incident.\n");
- if (request)
- PRINT_WARN("Operation of tape:%s\n",
- tape_op_verbose[request->op]);
- tape_dump_sense(device, request, irb);
+ dev_err(&device->cdev->dev, "An unexpected condition %d was "
+ "caught in tape error recovery. Please report this "
+ "incident", no);
+ tape_dump_sense_dbf(device, request, irb);
}
return tape_34xx_erp_failed(request, -EIO);
}
@@ -261,9 +255,9 @@ tape_34xx_erp_overrun(struct tape_device
struct irb *irb)
{
if (irb->ecw[3] == 0x40) {
- PRINT_WARN ("Data overrun error between control-unit "
- "and drive. Use a faster channel connection, "
- "if possible! \n");
+ dev_warn (&device->cdev->dev, "Data overrun error between "
+ "control-unit and drive. Use a faster channel "
+ "connection, if possible!");
return tape_34xx_erp_failed(request, -EIO);
}
return tape_34xx_erp_bug(device, request, irb, -1);
@@ -280,7 +274,8 @@ tape_34xx_erp_sequence(struct tape_devic
/*
* cu detected incorrect block-id sequence on tape.
*/
- PRINT_WARN("Illegal block-id sequence found!\n");
+ dev_warn (&device->cdev->dev, "Illegal block-id sequence "
+ "found!");
return tape_34xx_erp_failed(request, -EIO);
}
/*
@@ -393,8 +388,6 @@ tape_34xx_unit_check(struct tape_device
/* Writing at physical end of volume */
return tape_34xx_erp_failed(request, -ENOSPC);
default:
- PRINT_ERR("Invalid op in %s:%i\n",
- __func__, __LINE__);
return tape_34xx_erp_failed(request, 0);
}
}
@@ -420,7 +413,7 @@ tape_34xx_unit_check(struct tape_device
irb, -4);
/* data check is permanent, CU recovery has failed */
- PRINT_WARN("Permanent read error\n");
+ dev_warn (&device->cdev->dev, "Permanent read error");
return tape_34xx_erp_failed(request, -EIO);
case 0x25:
// a write data check occurred
@@ -433,22 +426,25 @@ tape_34xx_unit_check(struct tape_device
irb, -5);
// data check is permanent, cu-recovery has failed
- PRINT_WARN("Permanent write error\n");
+ dev_warn (&device->cdev->dev, "Permanent write error");
return tape_34xx_erp_failed(request, -EIO);
case 0x26:
/* Data Check (read opposite) occurred. */
return tape_34xx_erp_read_opposite(device, request);
case 0x28:
/* ID-Mark at tape start couldn't be written */
- PRINT_WARN("ID-Mark could not be written.\n");
+ dev_warn (&device->cdev->dev, "ID-Mark could not be "
+ "written.");
return tape_34xx_erp_failed(request, -EIO);
case 0x31:
/* Tape void. Tried to read beyond end of device. */
- PRINT_WARN("Read beyond end of recorded area.\n");
+ dev_warn (&device->cdev->dev, "Read beyond end of "
+ "recorded area.");
return tape_34xx_erp_failed(request, -ENOSPC);
case 0x41:
/* Record sequence error. */
- PRINT_WARN("Invalid block-id sequence found.\n");
+ dev_warn (&device->cdev->dev, "Invalid block-id "
+ "sequence found.");
return tape_34xx_erp_failed(request, -EIO);
default:
/* all data checks for 3480 should result in one of
@@ -470,16 +466,12 @@ tape_34xx_unit_check(struct tape_device
switch (sense[3]) {
case 0x00:
/* Unit check with erpa code 0. Report and ignore. */
- PRINT_WARN("Non-error sense was found. "
- "Unit-check will be ignored.\n");
return TAPE_IO_SUCCESS;
case 0x21:
/*
* Data streaming not operational. CU will switch to
* interlock mode. Reissue the command.
*/
- PRINT_WARN("Data streaming not operational. "
- "Switching to interlock-mode.\n");
return tape_34xx_erp_retry(request);
case 0x22:
/*
@@ -487,11 +479,7 @@ tape_34xx_unit_check(struct tape_device
* error on the lower interface, internal path not usable,
* or error during cartridge load.
*/
- PRINT_WARN("A path equipment check occurred. One of the "
- "following conditions occurred:\n");
- PRINT_WARN("drive adapter error, buffer error on the lower "
- "interface, internal path not usable, error "
- "during cartridge load.\n");
+ dev_warn (&device->cdev->dev, "path equipment check occurred.");
return tape_34xx_erp_failed(request, -EIO);
case 0x24:
/*
@@ -514,7 +502,6 @@ tape_34xx_unit_check(struct tape_device
* but the hardware isn't capable to do idrc, or a perform
* subsystem func is issued and the CU is not on-line.
*/
- PRINT_WARN ("Function incompatible. Try to switch off idrc\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x2a:
/*
@@ -552,23 +539,24 @@ tape_34xx_unit_check(struct tape_device
* reading the format id mark or that that format specified
* is not supported by the drive.
*/
- PRINT_WARN("Drive not capable processing the tape format!\n");
+ dev_warn (&device->cdev->dev, "Drive not capable processing "
+ "the tape format!");
return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
case 0x30:
/* The medium is write protected. */
- PRINT_WARN("Medium is write protected!\n");
+ dev_warn (&device->cdev->dev, "Medium is write protected!");
return tape_34xx_erp_failed(request, -EACCES);
case 0x32:
// Tension loss. We cannot recover this, it's an I/O error.
- PRINT_WARN("The drive lost tape tension.\n");
+ dev_warn (&device->cdev->dev, "The drive lost tape tension.");
return tape_34xx_erp_failed(request, -EIO);
case 0x33:
/*
* Load Failure. The cartridge was not inserted correctly or
* the tape is not threaded correctly.
*/
- PRINT_WARN("Cartridge load failure. Reload the cartridge "
- "and try again.\n");
+ dev_warn (&device->cdev->dev, "Cartridge load failure. Reload "
+ "the cartridge and try again.");
tape_34xx_delete_sbid_from(device, 0);
return tape_34xx_erp_failed(request, -EIO);
case 0x34:
@@ -576,8 +564,8 @@ tape_34xx_unit_check(struct tape_device
* Unload failure. The drive cannot maintain tape tension
* and control tape movement during an unload operation.
*/
- PRINT_WARN("Failure during cartridge unload. "
- "Please try manually.\n");
+ dev_warn (&device->cdev->dev, "Failure during cartridge "
+ "unload, try manually.");
if (request->op == TO_RUN)
return tape_34xx_erp_failed(request, -EIO);
return tape_34xx_erp_bug(device, request, irb, sense[3]);
@@ -589,8 +577,8 @@ tape_34xx_unit_check(struct tape_device
* - the cartridge loader does not respond correctly
* - a failure occurs during an index, load, or unload cycle
*/
- PRINT_WARN("Equipment check! Please check the drive and "
- "the cartridge loader.\n");
+ dev_warn (&device->cdev->dev, "Equipment check! Please check "
+ "the drive and the cartridge loader.");
return tape_34xx_erp_failed(request, -EIO);
case 0x36:
if (device->cdev->id.driver_info == tape_3490)
@@ -603,7 +591,7 @@ tape_34xx_unit_check(struct tape_device
* Tape length error. The tape is shorter than reported in
* the beginning-of-tape data.
*/
- PRINT_WARN("Tape length error.\n");
+ dev_warn (&device->cdev->dev, "Tape length error.");
return tape_34xx_erp_failed(request, -EIO);
case 0x38:
/*
@@ -620,12 +608,14 @@ tape_34xx_unit_check(struct tape_device
return tape_34xx_erp_failed(request, -EIO);
case 0x3a:
/* Drive switched to not ready. */
- PRINT_WARN("Drive not ready. Turn the ready/not ready switch "
- "to ready position and try again.\n");
+ dev_warn (&device->cdev->dev, "Drive not ready. Turn the "
+ "ready/not ready switch to ready position and try "
+ "again.");
return tape_34xx_erp_failed(request, -EIO);
case 0x3b:
/* Manual rewind or unload. This causes an I/O error. */
- PRINT_WARN("Medium was rewound or unloaded manually.\n");
+ dev_warn (&device->cdev->dev, "Medium was rewound or unloaded"
+ " manually.");
tape_34xx_delete_sbid_from(device, 0);
return tape_34xx_erp_failed(request, -EIO);
case 0x42:
@@ -633,7 +623,8 @@ tape_34xx_unit_check(struct tape_device
* Degraded mode. A condition that can cause degraded
* performance is detected.
*/
- PRINT_WARN("Subsystem is running in degraded mode.\n");
+ dev_warn (&device->cdev->dev, "Subsystem is running in "
+ "degraded mode.");
return tape_34xx_erp_retry(request);
case 0x43:
/* Drive not ready. */
@@ -652,7 +643,6 @@ tape_34xx_unit_check(struct tape_device
break;
}
}
- PRINT_WARN("The drive is not ready.\n");
return tape_34xx_erp_failed(request, -ENOMEDIUM);
case 0x44:
/* Locate Block unsuccessful. */
@@ -663,7 +653,8 @@ tape_34xx_unit_check(struct tape_device
return tape_34xx_erp_failed(request, -EIO);
case 0x45:
/* The drive is assigned to a different channel path. */
- PRINT_WARN("The drive is assigned elsewhere.\n");
+ dev_warn (&device->cdev->dev, "The drive is assigned "
+ "elsewhere.");
return tape_34xx_erp_failed(request, -EIO);
case 0x46:
/*
@@ -671,11 +662,12 @@ tape_34xx_unit_check(struct tape_device
* the power supply may be switched off or
* the drive address may not be set correctly.
*/
- PRINT_WARN("The drive is not on-line.");
+ dev_warn (&device->cdev->dev, "The drive is not on-line.");
return tape_34xx_erp_failed(request, -EIO);
case 0x47:
/* Volume fenced. CU reports volume integrity is lost. */
- PRINT_WARN("Volume fenced. The volume integrity is lost.\n");
+ dev_warn (&device->cdev->dev, "Volume fenced. The volume "
+ "integrity is lost.");
tape_34xx_delete_sbid_from(device, 0);
return tape_34xx_erp_failed(request, -EIO);
case 0x48:
@@ -683,20 +675,21 @@ tape_34xx_unit_check(struct tape_device
return tape_34xx_erp_retry(request);
case 0x49:
/* Bus out check. A parity check error on the bus was found. */
- PRINT_WARN("Bus out check. A data transfer over the bus "
- "has been corrupted.\n");
+ dev_warn (&device->cdev->dev, "Bus out check. A data transfer"
+ "over the bus has been corrupted.");
return tape_34xx_erp_failed(request, -EIO);
case 0x4a:
/* Control unit erp failed. */
- PRINT_WARN("The control unit I/O error recovery failed.\n");
+ dev_warn (&device->cdev->dev, "The control unit I/O error "
+ "recovery failed.");
return tape_34xx_erp_failed(request, -EIO);
case 0x4b:
/*
* CU and drive incompatible. The drive requests micro-program
* patches, which are not available on the CU.
*/
- PRINT_WARN("The drive needs microprogram patches from the "
- "control unit, which are not available.\n");
+ dev_warn (&device->cdev->dev, "The drive needs microprogram "
+ "patches from the control unit, which are not available.");
return tape_34xx_erp_failed(request, -EIO);
case 0x4c:
/*
@@ -721,8 +714,8 @@ tape_34xx_unit_check(struct tape_device
* the block to be written is larger than allowed for
* buffered mode.
*/
- PRINT_WARN("Maximum block size for buffered "
- "mode exceeded.\n");
+ dev_warn (&device->cdev->dev, "Maximum block size for"
+ " buffered mode exceeded.");
return tape_34xx_erp_failed(request, -ENOBUFS);
}
/* This erpa is reserved for 3480. */
@@ -759,22 +752,20 @@ tape_34xx_unit_check(struct tape_device
return tape_34xx_erp_retry(request);
case 0x55:
/* Channel interface recovery (permanent). */
- PRINT_WARN("A permanent channel interface error occurred.\n");
+ dev_warn (&device->cdev->dev, "A permanent channel interface "
+ "error occurred.");
return tape_34xx_erp_failed(request, -EIO);
case 0x56:
/* Channel protocol error. */
- PRINT_WARN("A channel protocol error occurred.\n");
+ dev_warn (&device->cdev->dev, "A channel protocol error "
+ "occurred.");
return tape_34xx_erp_failed(request, -EIO);
case 0x57:
if (device->cdev->id.driver_info == tape_3480) {
/* Attention intercept. */
- PRINT_WARN("An attention intercept occurred, "
- "which will be recovered.\n");
return tape_34xx_erp_retry(request);
} else {
/* Global status intercept. */
- PRINT_WARN("An global status intercept was received, "
- "which will be recovered.\n");
return tape_34xx_erp_retry(request);
}
case 0x5a:
@@ -782,42 +773,27 @@ tape_34xx_unit_check(struct tape_device
* Tape length incompatible. The tape inserted is too long,
* which could cause damage to the tape or the drive.
*/
- PRINT_WARN("Tape Length Incompatible\n");
- PRINT_WARN("Tape length exceeds IBM enhanced capacity "
- "cartdridge length or a medium\n");
- PRINT_WARN("with EC-CST identification mark has been mounted "
- "in a device that writes\n");
- PRINT_WARN("3480 or 3480 XF format.\n");
+ dev_warn (&device->cdev->dev, "Tape Length Incompatible");
return tape_34xx_erp_failed(request, -EIO);
case 0x5b:
/* Format 3480 XF incompatible */
if (sense[1] & SENSE_BEGINNING_OF_TAPE)
/* The tape will get overwritten. */
return tape_34xx_erp_retry(request);
- PRINT_WARN("Format 3480 XF Incompatible\n");
- PRINT_WARN("Medium has been created in 3480 format. "
- "To change the format writes\n");
- PRINT_WARN("must be issued at BOT.\n");
+ dev_warn (&device->cdev->dev, "Format 3480 XF Incompatible");
return tape_34xx_erp_failed(request, -EIO);
case 0x5c:
/* Format 3480-2 XF incompatible */
- PRINT_WARN("Format 3480-2 XF Incompatible\n");
- PRINT_WARN("Device can only read 3480 or 3480 XF format.\n");
+ dev_warn (&device->cdev->dev, "Format 3480-2 XF Incompatible");
return tape_34xx_erp_failed(request, -EIO);
case 0x5d:
/* Tape length violation. */
- PRINT_WARN("Tape Length Violation\n");
- PRINT_WARN("The mounted tape exceeds IBM Enhanced Capacity "
- "Cartdridge System Tape length.\n");
- PRINT_WARN("This may cause damage to the drive or tape when "
- "processing to the EOV\n");
+ dev_warn (&device->cdev->dev, "Tape Length Violation");
return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
case 0x5e:
/* Compaction algorithm incompatible. */
- PRINT_WARN("Compaction Algorithm Incompatible\n");
- PRINT_WARN("The volume is recorded using an incompatible "
- "compaction algorithm,\n");
- PRINT_WARN("which is not supported by the device.\n");
+ dev_warn (&device->cdev->dev, "Compaction Algorithm "
+ "Incompatible");
return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
/* The following erpas should have been covered earlier. */
@@ -848,7 +824,6 @@ tape_34xx_irq(struct tape_device *device
(irb->scsw.cmd.dstat & DEV_STAT_DEV_END) &&
(request->op == TO_WRI)) {
/* Write at end of volume */
- PRINT_INFO("End of volume\n"); /* XXX */
return tape_34xx_erp_failed(request, -ENOSPC);
}
@@ -869,9 +844,7 @@ tape_34xx_irq(struct tape_device *device
}
DBF_EVENT(6, "xunknownirq\n");
- PRINT_ERR("Unexpected interrupt.\n");
- PRINT_ERR("Current op is: %s", tape_op_verbose[request->op]);
- tape_dump_sense(device, request, irb);
+ tape_dump_sense_dbf(device, request, irb);
return TAPE_IO_STOP;
}
Index: quilt-2.6/drivers/s390/char/tape_3590.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/tape_3590.c
+++ quilt-2.6/drivers/s390/char/tape_3590.c
@@ -8,12 +8,15 @@
* Martin Schwidefsky <[email protected]>
*/
+#define KMSG_COMPONENT "tape"
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bio.h>
#include <asm/ebcdic.h>
#define TAPE_DBF_AREA tape_3590_dbf
+#define BUFSIZE 512 /* size of buffers for dynamic generated messages */
#include "tape.h"
#include "tape_std.h"
@@ -36,7 +39,7 @@ EXPORT_SYMBOL(TAPE_DBF_AREA);
* - Read Alternate: implemented
*******************************************************************/
-#define PRINTK_HEADER "TAPE_3590: "
+#define KMSG_COMPONENT "tape"
static const char *tape_3590_msg[TAPE_3590_MAX_MSG] = {
[0x00] = "",
@@ -726,7 +729,7 @@ static void tape_3590_med_state_set(stru
}
c_info->medium_status |= TAPE390_MEDIUM_LOADED_MASK;
if (sense->flags & MSENSE_CRYPT_MASK) {
- PRINT_INFO("Medium is encrypted (%04x)\n", sense->flags);
+ DBF_EVENT(6, "Medium is encrypted (%04x)\n", sense->flags);
c_info->medium_status |= TAPE390_MEDIUM_ENCRYPTED_MASK;
} else {
DBF_EVENT(6, "Medium is not encrypted %04x\n", sense->flags);
@@ -847,8 +850,7 @@ tape_3590_unsolicited_irq(struct tape_de
tape_3590_schedule_work(device, TO_READ_ATTMSG);
} else {
DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id);
- PRINT_WARN("Unsolicited IRQ (Device End) caught.\n");
- tape_dump_sense(device, NULL, irb);
+ tape_dump_sense_dbf(device, NULL, irb);
}
/* check medium state */
tape_3590_schedule_work(device, TO_MSEN);
@@ -876,8 +878,6 @@ tape_3590_erp_basic(struct tape_device *
case SENSE_BRA_DRE:
return tape_3590_erp_failed(device, request, irb, rc);
default:
- PRINT_ERR("Unknown BRA %x - This should not happen!\n",
- sense->bra);
BUG();
return TAPE_IO_STOP;
}
@@ -910,7 +910,7 @@ tape_3590_erp_swap(struct tape_device *d
* should proceed with the new tape... this
* should probably be done in user space!
*/
- PRINT_WARN("(%s): Swap Tape Device!\n", dev_name(&device->cdev->dev));
+ dev_warn (&device->cdev->dev, "Swap Tape Device!");
return tape_3590_erp_basic(device, request, irb, -EIO);
}
@@ -985,8 +985,6 @@ tape_3590_erp_read_opposite(struct tape_
return tape_3590_erp_failed(device, request, irb, -EIO);
break;
default:
- PRINT_WARN("read_opposite_recovery_called_with_op: %s\n",
- tape_op_verbose[request->op]);
return tape_3590_erp_failed(device, request, irb, -EIO);
}
}
@@ -998,50 +996,61 @@ static void
tape_3590_print_mim_msg_f0(struct tape_device *device, struct irb *irb)
{
struct tape_3590_sense *sense;
+ char *exception, *service;
+
+ exception = kmalloc(BUFSIZE, GFP_ATOMIC);
+ service = kmalloc(BUFSIZE, GFP_ATOMIC);
+
+ if (!exception || !service)
+ goto out_nomem;
sense = (struct tape_3590_sense *) irb->ecw;
/* Exception Message */
switch (sense->fmt.f70.emc) {
case 0x02:
- PRINT_WARN("(%s): Data degraded\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "Data degraded");
break;
case 0x03:
- PRINT_WARN("(%s): Data degraded in partion %i\n",
- dev_name(&device->cdev->dev), sense->fmt.f70.mp);
+ snprintf(exception, BUFSIZE, "Data degraded in partion %i",
+ sense->fmt.f70.mp);
break;
case 0x04:
- PRINT_WARN("(%s): Medium degraded\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "Medium degraded");
break;
case 0x05:
- PRINT_WARN("(%s): Medium degraded in partition %i\n",
- dev_name(&device->cdev->dev), sense->fmt.f70.mp);
+ snprintf(exception, BUFSIZE, "Medium degraded in partition %i",
+ sense->fmt.f70.mp);
break;
case 0x06:
- PRINT_WARN("(%s): Block 0 Error\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "Block 0 Error");
break;
case 0x07:
- PRINT_WARN("(%s): Medium Exception 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f70.md);
+ snprintf(exception, BUFSIZE, "Medium Exception 0x%02x",
+ sense->fmt.f70.md);
break;
default:
- PRINT_WARN("(%s): MIM ExMsg: 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f70.emc);
+ snprintf(exception, BUFSIZE, "0x%02x",
+ sense->fmt.f70.emc);
break;
}
/* Service Message */
switch (sense->fmt.f70.smc) {
case 0x02:
- PRINT_WARN("(%s): Reference Media maintenance procedure %i\n",
- dev_name(&device->cdev->dev), sense->fmt.f70.md);
+ snprintf(service, BUFSIZE, "Reference Media maintenance "
+ "procedure %i", sense->fmt.f70.md);
break;
default:
- PRINT_WARN("(%s): MIM ServiceMsg: 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f70.smc);
+ snprintf(service, BUFSIZE, "0x%02x",
+ sense->fmt.f70.smc);
break;
}
+
+ dev_warn (&device->cdev->dev, "Media information: exception %s, "
+ "service %s", exception, service);
+
+out_nomem:
+ kfree(exception);
+ kfree(service);
}
/*
@@ -1051,108 +1060,108 @@ static void
tape_3590_print_io_sim_msg_f1(struct tape_device *device, struct irb *irb)
{
struct tape_3590_sense *sense;
+ char *exception, *service;
+
+ exception = kmalloc(BUFSIZE, GFP_ATOMIC);
+ service = kmalloc(BUFSIZE, GFP_ATOMIC);
+
+ if (!exception || !service)
+ goto out_nomem;
sense = (struct tape_3590_sense *) irb->ecw;
/* Exception Message */
switch (sense->fmt.f71.emc) {
case 0x01:
- PRINT_WARN("(%s): Effect of failure is unknown\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "Effect of failure is unknown");
break;
case 0x02:
- PRINT_WARN("(%s): CU Exception - no performance impact\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "CU Exception - no performance "
+ "impact");
break;
case 0x03:
- PRINT_WARN("(%s): CU Exception on channel interface 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "CU Exception on channel "
+ "interface 0x%02x", sense->fmt.f71.md[0]);
break;
case 0x04:
- PRINT_WARN("(%s): CU Exception on device path 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "CU Exception on device path "
+ "0x%02x", sense->fmt.f71.md[0]);
break;
case 0x05:
- PRINT_WARN("(%s): CU Exception on library path 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "CU Exception on library path "
+ "0x%02x", sense->fmt.f71.md[0]);
break;
case 0x06:
- PRINT_WARN("(%s): CU Exception on node 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "CU Exception on node 0x%02x",
+ sense->fmt.f71.md[0]);
break;
case 0x07:
- PRINT_WARN("(%s): CU Exception on partition 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "CU Exception on partition "
+ "0x%02x", sense->fmt.f71.md[0]);
break;
default:
- PRINT_WARN("(%s): SIM ExMsg: 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.emc);
+ snprintf(exception, BUFSIZE, "0x%02x",
+ sense->fmt.f71.emc);
}
/* Service Message */
switch (sense->fmt.f71.smc) {
case 0x01:
- PRINT_WARN("(%s): Repair impact is unknown\n",
- dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Repair impact is unknown");
break;
case 0x02:
- PRINT_WARN("(%s): Repair will not impact cu performance\n",
- dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Repair will not impact cu "
+ "performance");
break;
case 0x03:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable node "
- "0x%x on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable node "
+ "0x%x on CU", sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable nodes "
- "(0x%x-0x%x) on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "nodes (0x%x-0x%x) on CU", sense->fmt.f71.md[1],
+ sense->fmt.f71.md[2]);
break;
case 0x04:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable cannel path "
- "0x%x on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "channel path 0x%x on CU",
+ sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable cannel paths "
- "(0x%x-0x%x) on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable cannel"
+ " paths (0x%x-0x%x) on CU",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x05:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable device path "
- "0x%x on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable device"
+ " path 0x%x on CU", sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable device paths "
- "(0x%x-0x%x) on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable device"
+ " paths (0x%x-0x%x) on CU",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x06:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable library path "
- "0x%x on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "library path 0x%x on CU",
+ sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable library paths "
- "(0x%x-0x%x) on CU\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "library paths (0x%x-0x%x) on CU",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x07:
- PRINT_WARN("(%s): Repair will disable access to CU\n",
- dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Repair will disable access to CU");
break;
default:
- PRINT_WARN("(%s): SIM ServiceMsg: 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.smc);
+ snprintf(service, BUFSIZE, "0x%02x",
+ sense->fmt.f71.smc);
}
+
+ dev_warn (&device->cdev->dev, "I/O subsystem information: exception"
+ " %s, service %s", exception, service);
+out_nomem:
+ kfree(exception);
+ kfree(service);
}
/*
@@ -1162,111 +1171,109 @@ static void
tape_3590_print_dev_sim_msg_f2(struct tape_device *device, struct irb *irb)
{
struct tape_3590_sense *sense;
+ char *exception, *service;
+
+ exception = kmalloc(BUFSIZE, GFP_ATOMIC);
+ service = kmalloc(BUFSIZE, GFP_ATOMIC);
+
+ if (!exception || !service)
+ goto out_nomem;
sense = (struct tape_3590_sense *) irb->ecw;
/* Exception Message */
switch (sense->fmt.f71.emc) {
case 0x01:
- PRINT_WARN("(%s): Effect of failure is unknown\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "Effect of failure is unknown");
break;
case 0x02:
- PRINT_WARN("(%s): DV Exception - no performance impact\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "DV Exception - no performance"
+ " impact");
break;
case 0x03:
- PRINT_WARN("(%s): DV Exception on channel interface 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "DV Exception on channel "
+ "interface 0x%02x", sense->fmt.f71.md[0]);
break;
case 0x04:
- PRINT_WARN("(%s): DV Exception on loader 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "DV Exception on loader 0x%02x",
+ sense->fmt.f71.md[0]);
break;
case 0x05:
- PRINT_WARN("(%s): DV Exception on message display 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
+ snprintf(exception, BUFSIZE, "DV Exception on message display"
+ " 0x%02x", sense->fmt.f71.md[0]);
break;
case 0x06:
- PRINT_WARN("(%s): DV Exception in tape path\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "DV Exception in tape path");
break;
case 0x07:
- PRINT_WARN("(%s): DV Exception in drive\n",
- dev_name(&device->cdev->dev));
+ snprintf(exception, BUFSIZE, "DV Exception in drive");
break;
default:
- PRINT_WARN("(%s): DSIM ExMsg: 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.emc);
+ snprintf(exception, BUFSIZE, "0x%02x",
+ sense->fmt.f71.emc);
}
/* Service Message */
switch (sense->fmt.f71.smc) {
case 0x01:
- PRINT_WARN("(%s): Repair impact is unknown\n",
- dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Repair impact is unknown");
break;
case 0x02:
- PRINT_WARN("(%s): Repair will not impact device performance\n",
- dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Repair will not impact device "
+ "performance");
break;
case 0x03:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable channel path "
- "0x%x on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "channel path 0x%x on DV",
+ sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable channel path "
- "(0x%x-0x%x) on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "channel path (0x%x-0x%x) on DV",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x04:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable interface 0x%x "
- "on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "interface 0x%x on DV", sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable interfaces "
- "(0x%x-0x%x) on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "interfaces (0x%x-0x%x) on DV",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x05:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable loader 0x%x "
- "on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable loader"
+ " 0x%x on DV", sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable loader "
- "(0x%x-0x%x) on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable loader"
+ " (0x%x-0x%x) on DV",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x07:
- PRINT_WARN("(%s): Repair will disable access to DV\n",
- dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Repair will disable access to DV");
break;
case 0x08:
if (sense->fmt.f71.mdf == 0)
- PRINT_WARN("(%s): Repair will disable message "
- "display 0x%x on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "message display 0x%x on DV",
+ sense->fmt.f71.md[1]);
else
- PRINT_WARN("(%s): Repair will disable message "
- "displays (0x%x-0x%x) on DV\n",
- dev_name(&device->cdev->dev),
- sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
+ snprintf(service, BUFSIZE, "Repair will disable "
+ "message displays (0x%x-0x%x) on DV",
+ sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x09:
- PRINT_WARN("(%s): Clean DV\n", dev_name(&device->cdev->dev));
+ snprintf(service, BUFSIZE, "Clean DV");
break;
default:
- PRINT_WARN("(%s): DSIM ServiceMsg: 0x%02x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.smc);
+ snprintf(service, BUFSIZE, "0x%02x",
+ sense->fmt.f71.smc);
}
+
+ dev_warn (&device->cdev->dev, "Device subsystem information: exception"
+ " %s, service %s", exception, service);
+out_nomem:
+ kfree(exception);
+ kfree(service);
}
/*
@@ -1282,46 +1289,42 @@ tape_3590_print_era_msg(struct tape_devi
return;
if ((sense->mc > 0) && (sense->mc < TAPE_3590_MAX_MSG)) {
if (tape_3590_msg[sense->mc] != NULL)
- PRINT_WARN("(%s): %s\n", dev_name(&device->cdev->dev),
- tape_3590_msg[sense->mc]);
- else {
- PRINT_WARN("(%s): Message Code 0x%x\n",
- dev_name(&device->cdev->dev), sense->mc);
- }
+ dev_warn (&device->cdev->dev, "Tape sense message: %s",
+ tape_3590_msg[sense->mc]);
+ else
+ dev_warn (&device->cdev->dev, "Tape sense message code"
+ " 0x%x", sense->mc);
return;
}
if (sense->mc == 0xf0) {
/* Standard Media Information Message */
- PRINT_WARN("(%s): MIM SEV=%i, MC=%02x, ES=%x/%x, "
- "RC=%02x-%04x-%02x\n", dev_name(&device->cdev->dev),
- sense->fmt.f70.sev, sense->mc,
- sense->fmt.f70.emc, sense->fmt.f70.smc,
- sense->fmt.f70.refcode, sense->fmt.f70.mid,
- sense->fmt.f70.fid);
+ dev_warn (&device->cdev->dev, "MIM SEV=%i, MC=%02x, ES=%x/%x, "
+ "RC=%02x-%04x-%02x", sense->fmt.f70.sev, sense->mc,
+ sense->fmt.f70.emc, sense->fmt.f70.smc,
+ sense->fmt.f70.refcode, sense->fmt.f70.mid,
+ sense->fmt.f70.fid);
tape_3590_print_mim_msg_f0(device, irb);
return;
}
if (sense->mc == 0xf1) {
/* Standard I/O Subsystem Service Information Message */
- PRINT_WARN("(%s): IOSIM SEV=%i, DEVTYPE=3590/%02x, "
- "MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.sev,
- device->cdev->id.dev_model,
- sense->mc, sense->fmt.f71.emc,
- sense->fmt.f71.smc, sense->fmt.f71.refcode1,
- sense->fmt.f71.refcode2, sense->fmt.f71.refcode3);
+ dev_warn (&device->cdev->dev, "IOSIM SEV=%i, DEVTYPE=3590/%02x,"
+ " MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x",
+ sense->fmt.f71.sev, device->cdev->id.dev_model,
+ sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc,
+ sense->fmt.f71.refcode1, sense->fmt.f71.refcode2,
+ sense->fmt.f71.refcode3);
tape_3590_print_io_sim_msg_f1(device, irb);
return;
}
if (sense->mc == 0xf2) {
/* Standard Device Service Information Message */
- PRINT_WARN("(%s): DEVSIM SEV=%i, DEVTYPE=3590/%02x, "
- "MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
- dev_name(&device->cdev->dev), sense->fmt.f71.sev,
- device->cdev->id.dev_model,
- sense->mc, sense->fmt.f71.emc,
- sense->fmt.f71.smc, sense->fmt.f71.refcode1,
- sense->fmt.f71.refcode2, sense->fmt.f71.refcode3);
+ dev_warn (&device->cdev->dev, "DEVSIM SEV=%i, DEVTYPE=3590/%02x"
+ ", MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x",
+ sense->fmt.f71.sev, device->cdev->id.dev_model,
+ sense->mc, sense->fmt.f71.emc, sense->fmt.f71.smc,
+ sense->fmt.f71.refcode1, sense->fmt.f71.refcode2,
+ sense->fmt.f71.refcode3);
tape_3590_print_dev_sim_msg_f2(device, irb);
return;
}
@@ -1329,8 +1332,7 @@ tape_3590_print_era_msg(struct tape_devi
/* Standard Library Service Information Message */
return;
}
- PRINT_WARN("(%s): Device Message(%x)\n",
- dev_name(&device->cdev->dev), sense->mc);
+ dev_warn (&device->cdev->dev, "Device Message(%x)", sense->mc);
}
static int tape_3590_crypt_error(struct tape_device *device,
@@ -1355,9 +1357,7 @@ static int tape_3590_crypt_error(struct
/* No connection to EKM */
return tape_3590_erp_basic(device, request, irb, -ENOTCONN);
- PRINT_ERR("(%s): Unable to get encryption key from EKM\n", bus_id);
- PRINT_ERR("(%s): CU=%02X DRIVE=%06X EKM=%02X:%04X\n", bus_id, cu_rc,
- drv_rc, ekm_rc1, ekm_rc2);
+ dev_err (&device->cdev->dev, "Unable to get encryption key from EKM");
return tape_3590_erp_basic(device, request, irb, -ENOKEY);
}
@@ -1443,8 +1443,6 @@ tape_3590_unit_check(struct tape_device
* print additional msg since default msg
* "device intervention" is not very meaningfull
*/
- PRINT_WARN("(%s): Tape operation when medium not loaded\n",
- dev_name(&device->cdev->dev));
tape_med_state_set(device, MS_UNLOADED);
tape_3590_schedule_work(device, TO_CRYPT_OFF);
return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM);
@@ -1490,19 +1488,14 @@ tape_3590_unit_check(struct tape_device
return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM);
case 0x6020:
- PRINT_WARN("(%s): Cartridge of wrong type ?\n",
- dev_name(&device->cdev->dev));
return tape_3590_erp_basic(device, request, irb, -EMEDIUMTYPE);
case 0x8011:
- PRINT_WARN("(%s): Another host has reserved the tape device\n",
- dev_name(&device->cdev->dev));
return tape_3590_erp_basic(device, request, irb, -EPERM);
case 0x8013:
- PRINT_WARN("(%s): Another host has privileged access to the "
- "tape device\n", dev_name(&device->cdev->dev));
- PRINT_WARN("(%s): To solve the problem unload the current "
- "cartridge!\n", dev_name(&device->cdev->dev));
+ dev_warn (&device->cdev->dev, "Another host has privileged "
+ "access to the tape device, To solve the problem "
+ "unload the current cartridge!");
return tape_3590_erp_basic(device, request, irb, -EPERM);
default:
return tape_3590_erp_basic(device, request, irb, -EIO);
@@ -1552,9 +1545,7 @@ tape_3590_irq(struct tape_device *device
}
DBF_EVENT(6, "xunknownirq\n");
- PRINT_ERR("Unexpected interrupt.\n");
- PRINT_ERR("Current op is: %s", tape_op_verbose[request->op]);
- tape_dump_sense(device, request, irb);
+ tape_dump_sense_dbf(device, request, irb);
return TAPE_IO_STOP;
}
@@ -1609,7 +1600,6 @@ tape_3590_setup_device(struct tape_devic
if (rc)
goto fail_rdc_data;
if (rdc_data->data[31] == 0x13) {
- PRINT_INFO("Device has crypto support\n");
data->crypt_info.capability |= TAPE390_CRYPT_SUPPORTED_MASK;
tape_3592_disable_crypt(device);
} else {
Index: quilt-2.6/drivers/s390/char/tape_block.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/tape_block.c
+++ quilt-2.6/drivers/s390/char/tape_block.c
@@ -10,6 +10,8 @@
* Stefan Bader <[email protected]>
*/
+#define KMSG_COMPONENT "tape_block"
+
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/blkdev.h>
@@ -23,8 +25,6 @@
#include "tape.h"
-#define PRINTK_HEADER "TAPE_BLOCK: "
-
#define TAPEBLOCK_MAX_SEC 100
#define TAPEBLOCK_MIN_REQUEUE 3
@@ -279,8 +279,6 @@ tapeblock_cleanup_device(struct tape_dev
tape_put_device(device);
if (!device->blk_data.disk) {
- PRINT_ERR("(%s): No gendisk to clean up!\n",
- dev_name(&device->cdev->dev));
goto cleanup_queue;
}
@@ -314,7 +312,7 @@ tapeblock_revalidate_disk(struct gendisk
if (!device->blk_data.medium_changed)
return 0;
- PRINT_INFO("Detecting media size...\n");
+ dev_info(&device->cdev->dev, "Detecting media size...");
rc = tape_mtop(device, MTFSFM, 1);
if (rc)
return rc;
@@ -341,7 +339,8 @@ tapeblock_revalidate_disk(struct gendisk
device->bof = rc;
nr_of_blks -= rc;
- PRINT_INFO("Found %i blocks on media\n", nr_of_blks);
+ dev_info(&device->cdev->dev, "Found %i blocks on media",
+ nr_of_blks);
set_capacity(device->blk_data.disk,
nr_of_blks*(TAPEBLOCK_HSEC_SIZE/512));
@@ -376,8 +375,8 @@ tapeblock_open(struct block_device *bdev
if (device->required_tapemarks) {
DBF_EVENT(2, "TBLOCK: missing tapemarks\n");
- PRINT_ERR("TBLOCK: Refusing to open tape with missing"
- " end of file marks.\n");
+ dev_warn(&device->cdev->dev, "Refusing to open tape with"
+ " missing end of file marks.");
rc = -EPERM;
goto put_device;
}
@@ -452,7 +451,6 @@ tapeblock_ioctl(
rc = -EINVAL;
break;
default:
- PRINT_WARN("invalid ioctl 0x%x\n", command);
rc = -EINVAL;
}
@@ -474,7 +472,6 @@ tapeblock_init(void)
if (tapeblock_major == 0)
tapeblock_major = rc;
- PRINT_INFO("tape gets major %d for block device\n", tapeblock_major);
return 0;
}
Index: quilt-2.6/drivers/s390/char/tape_char.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/tape_char.c
+++ quilt-2.6/drivers/s390/char/tape_char.c
@@ -24,8 +24,6 @@
#include "tape_std.h"
#include "tape_class.h"
-#define PRINTK_HEADER "TAPE_CHAR: "
-
#define TAPECHAR_MAJOR 0 /* get dynamic major */
/*
@@ -102,8 +100,6 @@ tapechar_check_idalbuffer(struct tape_de
if (block_size > MAX_BLOCKSIZE) {
DBF_EVENT(3, "Invalid blocksize (%zd > %d)\n",
block_size, MAX_BLOCKSIZE);
- PRINT_ERR("Invalid blocksize (%zd> %d)\n",
- block_size, MAX_BLOCKSIZE);
return -EINVAL;
}
@@ -485,7 +481,6 @@ tapechar_init (void)
return -1;
tapechar_major = MAJOR(dev);
- PRINT_INFO("tape gets major %d for character devices\n", MAJOR(dev));
return 0;
}
@@ -496,7 +491,5 @@ tapechar_init (void)
void
tapechar_exit(void)
{
- PRINT_INFO("tape releases major %d for character devices\n",
- tapechar_major);
unregister_chrdev_region(MKDEV(tapechar_major, 0), 256);
}
Index: quilt-2.6/drivers/s390/char/tape_core.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/tape_core.c
+++ quilt-2.6/drivers/s390/char/tape_core.c
@@ -11,6 +11,7 @@
* Stefan Bader <[email protected]>
*/
+#define KMSG_COMPONENT "tape"
#include <linux/module.h>
#include <linux/init.h> // for kernel parameters
#include <linux/kmod.h> // for requesting modules
@@ -25,7 +26,6 @@
#include "tape.h"
#include "tape_std.h"
-#define PRINTK_HEADER "TAPE_CORE: "
#define LONG_BUSY_TIMEOUT 180 /* seconds */
static void __tape_do_irq (struct ccw_device *, unsigned long, struct irb *);
@@ -214,13 +214,11 @@ tape_med_state_set(struct tape_device *d
switch(newstate){
case MS_UNLOADED:
device->tape_generic_status |= GMT_DR_OPEN(~0);
- PRINT_INFO("(%s): Tape is unloaded\n",
- dev_name(&device->cdev->dev));
+ dev_info(&device->cdev->dev, "Tape is unloaded");
break;
case MS_LOADED:
device->tape_generic_status &= ~GMT_DR_OPEN(~0);
- PRINT_INFO("(%s): Tape has been mounted\n",
- dev_name(&device->cdev->dev));
+ dev_info(&device->cdev->dev, "Tape has been mounted");
break;
default:
// print nothing
@@ -333,7 +331,6 @@ tape_generic_online(struct tape_device *
/* Let the discipline have a go at the device. */
device->discipline = discipline;
if (!try_module_get(discipline->owner)) {
- PRINT_ERR("Cannot get module. Module gone.\n");
return -EINVAL;
}
@@ -391,7 +388,6 @@ int
tape_generic_offline(struct tape_device *device)
{
if (!device) {
- PRINT_ERR("tape_generic_offline: no such device\n");
return -ENODEV;
}
@@ -413,9 +409,6 @@ tape_generic_offline(struct tape_device
DBF_EVENT(3, "(%08x): Set offline failed "
"- drive in use.\n",
device->cdev_id);
- PRINT_WARN("(%s): Set offline failed "
- "- drive in use.\n",
- dev_name(&device->cdev->dev));
spin_unlock_irq(get_ccwdev_lock(device->cdev));
return -EBUSY;
}
@@ -435,14 +428,11 @@ tape_alloc_device(void)
device = kzalloc(sizeof(struct tape_device), GFP_KERNEL);
if (device == NULL) {
DBF_EXCEPTION(2, "ti:no mem\n");
- PRINT_INFO ("can't allocate memory for "
- "tape info structure\n");
return ERR_PTR(-ENOMEM);
}
device->modeset_byte = kmalloc(1, GFP_KERNEL | GFP_DMA);
if (device->modeset_byte == NULL) {
DBF_EXCEPTION(2, "ti:no mem\n");
- PRINT_INFO("can't allocate memory for modeset byte\n");
kfree(device);
return ERR_PTR(-ENOMEM);
}
@@ -490,7 +480,6 @@ tape_put_device(struct tape_device *devi
} else {
if (remain < 0) {
DBF_EVENT(4, "put device without reference\n");
- PRINT_ERR("put device without reference\n");
} else {
DBF_EVENT(4, "tape_free_device(%p)\n", device);
kfree(device->modeset_byte);
@@ -538,8 +527,6 @@ tape_generic_probe(struct ccw_device *cd
ret = sysfs_create_group(&cdev->dev.kobj, &tape_attr_group);
if (ret) {
tape_put_device(device);
- PRINT_ERR("probe failed for tape device %s\n",
- dev_name(&cdev->dev));
return ret;
}
cdev->dev.driver_data = device;
@@ -547,7 +534,6 @@ tape_generic_probe(struct ccw_device *cd
device->cdev = cdev;
ccw_device_get_id(cdev, &dev_id);
device->cdev_id = devid_to_int(&dev_id);
- PRINT_INFO("tape device %s found\n", dev_name(&cdev->dev));
return ret;
}
@@ -584,7 +570,6 @@ tape_generic_remove(struct ccw_device *c
device = cdev->dev.driver_data;
if (!device) {
- PRINT_ERR("No device pointer in tape_generic_remove!\n");
return;
}
DBF_LH(3, "(%08x): tape_generic_remove(%p)\n", device->cdev_id, cdev);
@@ -615,10 +600,8 @@ tape_generic_remove(struct ccw_device *c
*/
DBF_EVENT(3, "(%08x): Drive in use vanished!\n",
device->cdev_id);
- PRINT_WARN("(%s): Drive in use vanished - "
- "expect trouble!\n",
- dev_name(&device->cdev->dev));
- PRINT_WARN("State was %i\n", device->tape_state);
+ dev_warn(&device->cdev->dev, "Drive in use vanished - "
+ "expect trouble!");
tape_state_set(device, TS_NOT_OPER);
__tape_discard_requests(device);
spin_unlock_irq(get_ccwdev_lock(device->cdev));
@@ -830,30 +813,6 @@ __tape_end_request(
}
/*
- * Write sense data to console/dbf
- */
-void
-tape_dump_sense(struct tape_device* device, struct tape_request *request,
- struct irb *irb)
-{
- unsigned int *sptr;
-
- PRINT_INFO("-------------------------------------------------\n");
- PRINT_INFO("DSTAT : %02x CSTAT: %02x CPA: %04x\n",
- irb->scsw.cmd.dstat, irb->scsw.cmd.cstat, irb->scsw.cmd.cpa);
- PRINT_INFO("DEVICE: %s\n", dev_name(&device->cdev->dev));
- if (request != NULL)
- PRINT_INFO("OP : %s\n", tape_op_verbose[request->op]);
-
- sptr = (unsigned int *) irb->ecw;
- PRINT_INFO("Sense data: %08X %08X %08X %08X \n",
- sptr[0], sptr[1], sptr[2], sptr[3]);
- PRINT_INFO("Sense data: %08X %08X %08X %08X \n",
- sptr[4], sptr[5], sptr[6], sptr[7]);
- PRINT_INFO("--------------------------------------------------\n");
-}
-
-/*
* Write sense data to dbf
*/
void
@@ -1051,8 +1010,6 @@ __tape_do_irq (struct ccw_device *cdev,
device = (struct tape_device *) cdev->dev.driver_data;
if (device == NULL) {
- PRINT_ERR("could not get device structure for %s "
- "in interrupt\n", dev_name(&cdev->dev));
return;
}
request = (struct tape_request *) intparm;
@@ -1064,13 +1021,13 @@ __tape_do_irq (struct ccw_device *cdev,
/* FIXME: What to do with the request? */
switch (PTR_ERR(irb)) {
case -ETIMEDOUT:
- PRINT_WARN("(%s): Request timed out\n",
+ DBF_LH(1, "(%s): Request timed out\n",
dev_name(&cdev->dev));
case -EIO:
__tape_end_request(device, request, -EIO);
break;
default:
- PRINT_ERR("(%s): Unexpected i/o error %li\n",
+ DBF_LH(1, "(%s): Unexpected i/o error %li\n",
dev_name(&cdev->dev),
PTR_ERR(irb));
}
@@ -1182,8 +1139,6 @@ __tape_do_irq (struct ccw_device *cdev,
default:
if (rc > 0) {
DBF_EVENT(6, "xunknownrc\n");
- PRINT_ERR("Invalid return code from discipline "
- "interrupt function.\n");
__tape_end_request(device, request, -EIO);
} else {
__tape_end_request(device, request, rc);
@@ -1323,7 +1278,6 @@ EXPORT_SYMBOL(tape_state_set);
EXPORT_SYMBOL(tape_med_state_set);
EXPORT_SYMBOL(tape_alloc_request);
EXPORT_SYMBOL(tape_free_request);
-EXPORT_SYMBOL(tape_dump_sense);
EXPORT_SYMBOL(tape_dump_sense_dbf);
EXPORT_SYMBOL(tape_do_io);
EXPORT_SYMBOL(tape_do_io_async);
Index: quilt-2.6/drivers/s390/char/tape.h
===================================================================
--- quilt-2.6.orig/drivers/s390/char/tape.h
+++ quilt-2.6/drivers/s390/char/tape.h
@@ -324,8 +324,6 @@ static inline void tape_proc_cleanup (vo
#endif
/* a function for dumping device sense info */
-extern void tape_dump_sense(struct tape_device *, struct tape_request *,
- struct irb *);
extern void tape_dump_sense_dbf(struct tape_device *, struct tape_request *,
struct irb *);
Index: quilt-2.6/drivers/s390/char/tape_proc.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/tape_proc.c
+++ quilt-2.6/drivers/s390/char/tape_proc.c
@@ -20,8 +20,6 @@
#include "tape.h"
-#define PRINTK_HEADER "TAPE_PROC: "
-
static const char *tape_med_st_verbose[MS_SIZE] =
{
[MS_UNKNOWN] = "UNKNOWN ",
@@ -128,7 +126,6 @@ tape_proc_init(void)
proc_create("tapedevices", S_IFREG | S_IRUGO | S_IWUSR, NULL,
&tape_proc_ops);
if (tape_proc_devices == NULL) {
- PRINT_WARN("tape: Cannot register procfs entry tapedevices\n");
return;
}
}
Index: quilt-2.6/drivers/s390/char/tape_std.c
===================================================================
--- quilt-2.6.orig/drivers/s390/char/tape_std.c
+++ quilt-2.6/drivers/s390/char/tape_std.c
@@ -26,8 +26,6 @@
#include "tape.h"
#include "tape_std.h"
-#define PRINTK_HEADER "TAPE_STD: "
-
/*
* tape_std_assign
*/
@@ -46,9 +44,8 @@ tape_std_assign_timeout(unsigned long da
device->cdev_id);
rc = tape_cancel_io(device, request);
if(rc)
- PRINT_ERR("(%s): Assign timeout: Cancel failed with rc = %i\n",
+ DBF_EVENT(3, "(%s): Assign timeout: Cancel failed with rc = %i\n",
dev_name(&device->cdev->dev), rc);
-
}
int
@@ -82,8 +79,6 @@ tape_std_assign(struct tape_device *devi
del_timer(&timeout);
if (rc != 0) {
- PRINT_WARN("%s: assign failed - device might be busy\n",
- dev_name(&device->cdev->dev));
DBF_EVENT(3, "%08x: assign failed - device might be busy\n",
device->cdev_id);
} else {
@@ -105,8 +100,6 @@ tape_std_unassign (struct tape_device *d
if (device->tape_state == TS_NOT_OPER) {
DBF_EVENT(3, "(%08x): Can't unassign device\n",
device->cdev_id);
- PRINT_WARN("(%s): Can't unassign device - device gone\n",
- dev_name(&device->cdev->dev));
return -EIO;
}
@@ -120,8 +113,6 @@ tape_std_unassign (struct tape_device *d
if ((rc = tape_do_io(device, request)) != 0) {
DBF_EVENT(3, "%08x: Unassign failed\n", device->cdev_id);
- PRINT_WARN("%s: Unassign failed\n",
- dev_name(&device->cdev->dev));
} else {
DBF_EVENT(3, "%08x: Tape unassigned\n", device->cdev_id);
}
@@ -242,8 +233,6 @@ tape_std_mtsetblk(struct tape_device *de
if (count > MAX_BLOCKSIZE) {
DBF_EVENT(3, "Invalid block size (%d > %d) given.\n",
count, MAX_BLOCKSIZE);
- PRINT_ERR("Invalid block size (%d > %d) given.\n",
- count, MAX_BLOCKSIZE);
return -EINVAL;
}
@@ -633,14 +622,6 @@ tape_std_mtcompression(struct tape_devic
if (mt_count < 0 || mt_count > 1) {
DBF_EXCEPTION(6, "xcom parm\n");
- if (*device->modeset_byte & 0x08)
- PRINT_INFO("(%s) Compression is currently on\n",
- dev_name(&device->cdev->dev));
- else
- PRINT_INFO("(%s) Compression is currently off\n",
- dev_name(&device->cdev->dev));
- PRINT_INFO("Use 1 to switch compression on, 0 to "
- "switch it off\n");
return -EINVAL;
}
request = tape_alloc_request(2, 0);
--
blue skies,
Martin.
"Reality continues to ruin my life." - Calvin.