2008-12-03 16:55:57

by Philip Langdale

[permalink] [raw]
Subject: [PATCH] ricoh_mmc: Use suspend/resume_noirq (v2)

If ricoh_mmc suspends before sdhci_pci, it will pull the card
out from under the controller, which could leave the system in
a very confused state.

Using suspend/resume_noirq ensures that sdhci_pci suspends first
and resumes second.

Signed-off-by: Philip Langdale <[email protected]>
---

ricoh_mmc.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/ricoh_mmc.c b/drivers/mmc/host/ricoh_mmc.c
index 1837719..b4958a7 100644
--- a/drivers/mmc/host/ricoh_mmc.c
+++ b/drivers/mmc/host/ricoh_mmc.c
@@ -194,10 +194,14 @@ static void __devexit ricoh_mmc_remove(struct pci_dev *pdev)
pci_set_drvdata(pdev, NULL);
}

-static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state)
+static int ricoh_mmc_suspend_noirq(struct device *dev)
{
+ struct pci_dev *pdev = NULL;
struct pci_dev *fw_dev = NULL;

+ pdev = to_pci_dev(dev);
+ BUG_ON(pdev == NULL);
+
fw_dev = pci_get_drvdata(pdev);
BUG_ON(fw_dev == NULL);

@@ -208,10 +212,14 @@ static int ricoh_mmc_suspend(struct pci_dev *pdev, pm_message_t state)
return 0;
}

-static int ricoh_mmc_resume(struct pci_dev *pdev)
+static int ricoh_mmc_resume_noirq(struct device *dev)
{
+ struct pci_dev *pdev = NULL;
struct pci_dev *fw_dev = NULL;

+ pdev = to_pci_dev(dev);
+ BUG_ON(pdev == NULL);
+
fw_dev = pci_get_drvdata(pdev);
BUG_ON(fw_dev == NULL);

@@ -222,13 +230,17 @@ static int ricoh_mmc_resume(struct pci_dev *pdev)
return 0;
}

+static struct dev_pm_ops ricoh_mmc_pm_opts = {
+ .suspend_noirq = ricoh_mmc_suspend_noirq,
+ .resume_noirq = ricoh_mmc_resume_noirq,
+};
+
static struct pci_driver ricoh_mmc_driver = {
.name = DRIVER_NAME,
.id_table = pci_ids,
.probe = ricoh_mmc_probe,
.remove = __devexit_p(ricoh_mmc_remove),
- .suspend = ricoh_mmc_suspend,
- .resume = ricoh_mmc_resume,
+ .driver.pm = &ricoh_mmc_pm_opts,
};

/*****************************************************************************\


2008-12-04 06:47:22

by Pierre Ossman

[permalink] [raw]
Subject: Re: [PATCH] ricoh_mmc: Use suspend/resume_noirq (v2)

On Wed, 3 Dec 2008 11:59:33 -0500 (EST)
[email protected] wrote:

> If ricoh_mmc suspends before sdhci_pci, it will pull the card
> out from under the controller, which could leave the system in
> a very confused state.
>
> Using suspend/resume_noirq ensures that sdhci_pci suspends first
> and resumes second.
>
> Signed-off-by: Philip Langdale <[email protected]>
> ---

It's probably easier if this is carried in rafael's tree, where the PM
change is. Add a

Acked-by: Pierre Ossman <[email protected]>

Rgds
--
-- Pierre Ossman

WARNING: This correspondence is being monitored by the
Swedish government. Make sure your server uses encryption
for SMTP traffic and consider using PGP for end-to-end
encryption.


Attachments:
signature.asc (197.00 B)