Hi all
testing 2.6.28 with suspend/resume as fromhttp://bugzilla.kernel.org/show_bug.cgi?id=7077I need to congratulate with devs because after so many kernels i canfinally suspend my Asus A1000 (Sis630) machine!!Great!
Problem is on resume, i get an oops (attaching dmesg output):
pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02pci 0000:00:0a.0: IO window: 0x001000-0x0010ffpci 0000:00:0a.0: IO window: 0x001400-0x0014ffpci 0000:00:0a.0: PREFETCH window: 0x20000000-0x23ffffffpci 0000:00:0a.0: MEM window: 0x24000000-0x27ffffffpci 0000:00:0a.1: CardBus bridge, secondary bus 0000:06pci 0000:00:0a.1: IO window: 0x001800-0x0018ffpci 0000:00:0a.1: IO window: 0x001c00-0x001cffpci 0000:00:0a.1: PREFETCH window: 0x28000000-0x2bffffffpci 0000:00:0a.1: MEM window: 0x2c000000-0x2fffffffpci 0000:00:02.0: setting latency timer to 64ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11PCI: setting IRQ 11 as level-triggeredpci 0000:00:0a.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5PCI: setting IRQ 5 as level-triggeredpci 0000:00:0a.1: PCI INT B -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5bus: 00 index 0 io port: [0x00-0xffff]bus: 00 index 1 mmio: [0x000000-0xffffffff]bus: 01 index 0 io port: [0x9000-0x9fff]bus: 01 index 1 mmio: [0xcd800000-0xcdffffff]bus: 01 index 2 mmio: [0xd8000000-0xe7efffff]bus: 01 index 3 mmio: [0x0-0x0]bus: 02 index 0 io port: [0x1000-0x10ff]bus: 02 index 1 io port: [0x1400-0x14ff]bus: 02 index 2 mmio: [0x20000000-0x23ffffff]bus: 02 index 3 mmio: [0x24000000-0x27ffffff]bus: 06 index 0 io port: [0x1800-0x18ff]bus: 06 index 1 io port: [0x1c00-0x1cff]bus: 06 index 2 mmio: [0x28000000-0x2bffffff]bus: 06 index 3 mmio: [0x2c000000-0x2fffffff]NET: Registered protocol family 2IP route cache hash table entries: 4096 (order: 2, 16384 bytes)TCP established hash table entries: 16384 (order: 5, 131072 bytes)TCP bind hash table entries: 16384 (order: 4, 65536 bytes)TCP: Hash tables configured (established 16384 bind 16384)TCP reno registeredNET: Registered protocol family 1Simple Boot Flag at 0x3a set to 0x1Microcode Update Driver: v2.00 <[email protected]>, Peter Orubamsgmni has been set to 594Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)io scheduler noop registeredio scheduler cfq registered (default)pci 0000:01:00.0: Boot video devicesisfb: Video ROM foundsisfb: Video RAM at 0xd8000000, mapped to 0xd3880000, size 16384ksisfb: MMIO at 0xcd800000, mapped to 0xd3840000, size 128ksisfb: Memory heap starting at 8192K, size 7672KSwitched to high resolution mode on CPU 0sisfb: Detected LVDS transmittersisfb: Detected Chrontel TV encodersisfb: Detected 800x600 flat panelsisfb: Detected LCD PDC 0x20sisfb: Default mode is 800x600x16 (75Hz)sisfb: Initial vbflags 0x3000022fbcon: SiS 630 (fb0) is primary deviceConsole: switching to colour frame buffer device 100x37sisfb: 2D acceleration is enabled, y-panning enabled (auto-max)fb0: SiS 630 frame buffer device version 1.8.9sisfb: Copyright (C) 2001-2005 Thomas WinischhoferACPI: AC Adapter [AC] (on-line)ACPI: Battery Slot [BAT0] (battery absent)input: Power Button (FF) as /class/input/input0ACPI: Power Button (FF) [PWRF]input: Power Button (CM) as /class/input/input1ACPI: Power Button (CM) [PWRB]input: Sleep Button (CM) as /class/input/input2ACPI: Sleep Button (CM) [SLPB]input: Lid Switch as /class/input/input3ACPI: Lid Switch [LID]fan PNP0C0B:00: registered as cooling_device0ACPI: Fan [FAN] (off)ACPI: CPU0 (power states: C1[C1] C2[C2])processor ACPI_CPU:00: registered as cooling_device1ACPI: Processor [CPU0] (supports 8 throttling states)thermal LNXTHERM:01: registered as thermal_zone0ACPI: Thermal Zone [THRM] (67 C)Real Time Clock Driver v1.12acLinux agpgart interface v0.103agpgart-sis 0000:00:00.0: SiS chipset [1039/0630]agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000[drm] Initialized drm 1.1.0 20060810sisfb 0000:01:00.0: setting latency timer to 64[drm] Initialized sis 1.3.0 20070626 on minor 0Floppy drive(s): fd0 is 1.44MFDC 0 is a National Semiconductor PC87306brd: module loadedloop: module loadedsis900.c: v1.08.10 Apr. 2 2006sis900 0000:00:01.1: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 50000:00:01.1: SiS 900 Internal MII PHY transceiver found at address 1.0000:00:01.1: Using transceiver found at address 1 as defaulteth0: SiS 900 PCI Fast Ethernet at 0xb000, IRQ 5, 00:e0:18:1a:6e:d0Driver 'sd' needs updating - please use bus_type methodspata_sis 0000:00:00.1: version 0.5.2pata_sis 0000:00:00.1: can't derive routing for PCI INT Ascsi0 : pata_sisscsi1 : pata_sisata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xb400 irq 14ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xb408 irq 15ata1.00: ATA-6: HTS424040M9AT00, MA2OA60V, max UDMA/100ata1.00: 78140160 sectors, multi 16: LBA48ata1.00: limited to UDMA/33 due to 40-wire cableata1.00: configured for UDMA/33ata2.00: ATAPI: CD-224E, 1.5A, max MWDMA2ata2.00: configured for PIO4scsi 0:0:0:0: Direct-Access ATA HTS424040M9AT00 MA2O PQ: 0 ANSI: 5sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn'tsupport DPO or FUAsd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn'tsupport DPO or FUA sda: sda1 sda2 < sda5 sda6 >sd 0:0:0:0: [sda] Attached SCSI disksd 0:0:0:0: Attached scsi generic sg0 type 0scsi 1:0:0:0: CD-ROM TEAC CD-224E 1.5A PQ: 0 ANSI: 5scsi 1:0:0:0: Attached scsi generic sg1 type 5yenta_cardbus 0000:00:0a.0: CardBus bridge found [1043:1504]yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0498, PCI irq 11yenta_cardbus 0000:00:0a.0: Socket status: 30000820yenta_cardbus 0000:00:0a.1: CardBus bridge found [1043:1504]yenta_cardbus 0000:00:0a.1: ISA IRQ mask 0x0498, PCI irq 5yenta_cardbus 0000:00:0a.1: Socket status: 30000006ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) DriverACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5ohci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5ohci_hcd 0000:00:01.2: OHCI Host Controllerohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1ohci_hcd 0000:00:01.2: irq 5, io mem 0xcf000000usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 3 ports detectedohci_hcd 0000:00:01.3: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5ohci_hcd 0000:00:01.3: OHCI Host Controllerohci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 2ohci_hcd 0000:00:01.3: irq 5, io mem 0xce800000usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 2 ports detectedPNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all miceinput: PC Speaker as /class/input/input4ACPI: I/O resource sis630_smbus [0xe480-0xe493] conflicts with ACPIregion SM00 [0xe480-0xe489]ACPI: Device needs an ACPI drivercpuidle: using governor laddercpuidle: using governor menuAdvanced Linux Sound Architecture Driver Version 1.0.18rc3.ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5Trident4DWaveAudio 0000:00:01.4: PCI INT B -> Link[LNKB] -> GSI 5(level, low) -> IRQ 5Marking TSC unstable due to TSC halts in idleinput: AT Translated Set 2 keyboard as /class/input/input5pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0input: SynPS/2 Synaptics TouchPad as /class/input/input6AC'97 0 does not respond - RESETAC'97 0 access is not valid [0x0], removing mixer.MC'97 1 converters and GPIO not ready (0x800f)ALSA device list: #0: SiS SI7018 PCI Audio at 0xa800, irq 5ip_tables: (C) 2000-2006 Netfilter Core TeamTCP cubic registeredNET: Registered protocol family 17NET: Registered protocol family 15IO APIC resources could be not be allocated.Using IPI Shortcut modeReiserFS: sda5: found reiserfs format "3.6" with standard journalReiserFS: sda5: using ordered data modeReiserFS: sda5: journal params: device sda5, size 8192, journal firstblock 18, max trans len 1024, max batch 900, max commit age 30, maxtrans age 30ReiserFS: sda5: checking transaction log (sda5)ReiserFS: sda5: Using r5 hash to sort namesVFS: Mounted root (reiserfs filesystem) readonly.Freeing unused kernel memory: 264k freedcfg80211: Using static regulatory domain infocfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)cfg80211: Calling CRDA for country: USath5k_pci 0000:02:00.0: enabling device (0000 -> 0002)ath5k_pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11ath5k_pci 0000:02:00.0: registered as 'phy0'phy0: Selected rate control algorithm 'minstrel'ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)ath5k phy0: RF2112B 2GHz radio found (0x46)udev: renamed network interface wlan0 to ath0eth0: Media Link OffAdding 627444k swap on /dev/sda6. Priority:-1 extents:1 across:627444kac97 codec read TIMEOUT [0x54/0x800fc0d4]!!!input: PS/2 Synaptics TouchPad as /class/input/input7ath0: authenticate with AP 00:12:a9:ce:c7:0cath0: authenticatedath0: associate with AP 00:12:a9:ce:c7:0cath0: RX AssocResp from 00:12:a9:ce:c7:0c (capab=0x471 status=0 aid=1)ath0: associatedath0: deauthenticatedath0: direct probe to AP 00:12:a9:ce:c7:0c try 1ath0 direct probe respondedath0: authenticate with AP 00:12:a9:ce:c7:0cath0: authenticatedath0: associate with AP 00:12:a9:ce:c7:0cath0: RX ReassocResp from 00:12:a9:ce:c7:0c (capab=0x471 status=0 aid=1)ath0: associatedath0: deauthenticatedath0: direct probe to AP 00:12:a9:ce:c7:0c try 1ath0 direct probe respondedath0: authenticate with AP 00:12:a9:ce:c7:0cath0: authenticatedath0: associate with AP 00:12:a9:ce:c7:0cath0: RX ReassocResp from 00:12:a9:ce:c7:0c (capab=0x471 status=0 aid=1)ath0: associatedath0: deauthenticatedath0: direct probe to AP 00:12:a9:ce:c7:0c try 1ath0 direct probe respondedath0: authenticate with AP 00:12:a9:ce:c7:0cath0: authenticatedath0: associate with AP 00:12:a9:ce:c7:0cath0: RX ReassocResp from 00:12:a9:ce:c7:0c (capab=0x471 status=0 aid=1)ath0: associatedACPI: EC: non-query interrupt received, switching to interrupt modeath0: deauthenticatedath0: direct probe to AP 00:12:a9:ce:c7:0c try 1ath0 direct probe respondedath0: authenticate with AP 00:12:a9:ce:c7:0cath0: authenticatedath0: associate with AP 00:12:a9:ce:c7:0cath0: RX ReassocResp from 00:12:a9:ce:c7:0c (capab=0x471 status=0 aid=1)ath0: associatedPM: Syncing filesystems ... done.Freezing user space processes ... (elapsed 0.01 seconds) done.Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.PM: Shrinking memory... -done (0 pages freed)PM: Freed 0 kbytes in 0.03 seconds (0.00 MB/s)Suspending console(s) (use no_console_suspend to debug)ath5k_pci 0000:02:00.0: PCI INT A disabledsd 0:0:0:0: [sda] Synchronizing SCSI cacheTrident4DWaveAudio 0000:00:01.4: PCI INT B disabledohci_hcd 0000:00:01.3: PCI INT D disabledohci_hcd 0000:00:01.2: PCI INT D disabledpata_sis 0000:00:00.1: can't derive routing for PCI INT APM: Creating hibernation image:PM: Need to copy 21327 pagesIntel machine check architecture supported.Intel machine check reporting enabled on CPU#0.pata_sis 0000:00:00.1: restoring config space at offset 0x1 (was 0x3,writing 0x7)pata_sis 0000:00:00.1: can't derive routing for PCI INT Aeth0: Media Link Offohci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5ohci_hcd 0000:00:01.3: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5Trident4DWaveAudio 0000:00:01.4: PCI INT B -> Link[LNKB] -> GSI 5(level, low) -> IRQ 5ata1.00: configured for UDMA/33sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn'tsupport DPO or FUAata2.00: configured for PIO4ac97 codec read TIMEOUT [0x3c/0x7101c0bc]!!!ac97 codec read TIMEOUT [0x3c/0x7101c0bc]!!!ac97 codec read TIMEOUT [0x3c/0x7101c0bc]!!!ac97 codec read TIMEOUT [0x3c/0x7101c0bc]!!!ac97 codec read TIMEOUT [0x1c/0x7101c09c]!!!ac97 codec read TIMEOUT [0x3e/0x7101c0be]!!!ac97 codec read TIMEOUT [0x40/0x7101c0c0]!!!ac97 codec read TIMEOUT [0x42/0x7101c0c2]!!!ac97 codec read TIMEOUT [0x44/0x7101c0c4]!!!ac97 codec read TIMEOUT [0x54/0x7101c0d4]!!!pci 0000:00:02.0: setting latency timer to 64sisfb 0000:01:00.0: setting latency timer to 64sd 0:0:0:0: [sda] Starting diskath5k_pci 0000:02:00.0: restoring config space at offset 0xf (was0x1c0a0100, writing 0x1c0a010b)ath5k_pci 0000:02:00.0: restoring config space at offset 0x4 (was 0x0,writing 0x24000000)ath5k_pci 0000:02:00.0: restoring config space at offset 0x3 (was 0x0,writing 0xa808)ath5k_pci 0000:02:00.0: restoring config space at offset 0x1 (was0x2900000, writing 0x2900006)ath5k_pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11Restarting tasks ... done.BUG: unable to handle kernel NULL pointer dereference at 00000000IP: [<c027dbdf>] 0xc027dbdf*pde = 00000000Oops: 0000 [#1]last sysfs file: /sys/power/stateModules linked in: arc4 ecb cryptomgr aead crypto_blkciphercrypto_algapi ath5k mac80211 led_class cfg80211
Pid: 207, comm: kseriod Tainted: G A (2.6.28 #26) A1BEIP: 0060:[<c027dbdf>] EFLAGS: 00010282 CPU: 0EAX: 00000000 EBX: d29ff000 ECX: 00000006 EDX: c027dbc5ESI: 00000000 EDI: d28b3f64 EBP: d1d796c0 ESP: d28b3f54 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068Process kseriod (pid: 207, ti=d28b2000 task=d28297a0 task.ti=d28b2000)Stack: 00000000 d1d79820 c027ac74 d28297a0 c0124598 d28b3f68 d28b3f68 d283a000 d2839800 d2a03a70 d2a03e00 d29ff000 00000000 d1d796c0 c027cd1c d2a03e00 d2a03e00 d2a03e70 c02750a2 d2a03e00 00000246 d1d796c0 c0275587 d28b3fb4Call Trace: [<c027ac74>] 0xc027ac74 [<c0124598>] 0xc0124598 [<c027cd1c>] 0xc027cd1c [<c02750a2>] 0xc02750a2 [<c0275587>] 0xc0275587 [<c0124598>] 0xc0124598 [<c0275482>] 0xc0275482 [<c01242ab>] 0xc01242ab [<c0124275>] 0xc0124275 [<c0103823>] 0xc0103823Code: 37 c0 31 c0 c7 47 58 1c 87 37 c0 5e 5b 5e 5f 5d c3 55 57 56 5383 ec 28 fc b9 06 00 00 00 89 c3 8b 00 8d 7c 24 10 89 04 24 89 c6 <f3>a5 8b 44 24 14 8b 54 24 18 8b 7c 24 1c 8b 6c 24 10 89 44 24EIP: [<c027dbdf>] SS:ESP 0068:d28b3f54---[ end trace e760723794b1da56 ]---ath0: deauthenticatedath0: direct probe to AP 00:12:a9:ce:c7:0c try 1ath0 direct probe respondedath0: authenticate with AP 00:12:a9:ce:c7:0cath0: authenticatedath0: associate with AP 00:12:a9:ce:c7:0cath0: RX ReassocResp from 00:12:a9:ce:c7:0c (capab=0x471 status=0 aid=1)ath0: associatedACPI: EC: non-query interrupt received, switching to interrupt mode
config is: http://www.patriziobassi.it/downloads/config-2.6.28
CC me i'm not subscribed
Merry xmas!
-- Patrizio Bassihttp://www.patriziobassi.ithttp://piazzadelpopolo.patriziobassi.it????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay? ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?
On Thu, Dec 25, 2008 at 09:25:38PM +0100, Patrizio Bassi wrote:
> Call Trace:
> [<c027ac74>] 0xc027ac74
> [<c0124598>] 0xc0124598
> [<c027cd1c>] 0xc027cd1c
> [<c02750a2>] 0xc02750a2
> [<c0275587>] 0xc0275587
> [<c0124598>] 0xc0124598
> [<c0275482>] 0xc0275482
> [<c01242ab>] 0xc01242ab
> [<c0124275>] 0xc0124275
> [<c0103823>] 0xc0103823
> Code: 37 c0 31 c0 c7 47 58 1c 87 37 c0 5e 5b 5e 5f 5d c3 55 57 56 53
> 83 ec 28 fc b9 06 00 00 00 89 c3 8b 00 8d 7c 24 10 89 04 24 89 c6 <f3>
> a5 8b 44 24 14 8b 54 24 18 8b 7c 24 1c 8b 6c 24 10 89 44 24
> EIP: [<c027dbdf>] SS:ESP 0068:d28b3f54
> ---[ end trace e760723794b1da56 ]---
Always run with CONFIG_KALSYMS=y, so normal backtraces are on
and nobody will waste time asking to enable it and enabling it.
2008/12/25 Alexey Dobriyan <[email protected]>:
> On Thu, Dec 25, 2008 at 09:25:38PM +0100, Patrizio Bassi wrote:
>> Call Trace:
>> [<c027ac74>] 0xc027ac74
>> [<c0124598>] 0xc0124598
>> [<c027cd1c>] 0xc027cd1c
>> [<c02750a2>] 0xc02750a2
>> [<c0275587>] 0xc0275587
>> [<c0124598>] 0xc0124598
>> [<c0275482>] 0xc0275482
>> [<c01242ab>] 0xc01242ab
>> [<c0124275>] 0xc0124275
>> [<c0103823>] 0xc0103823
>> Code: 37 c0 31 c0 c7 47 58 1c 87 37 c0 5e 5b 5e 5f 5d c3 55 57 56 53
>> 83 ec 28 fc b9 06 00 00 00 89 c3 8b 00 8d 7c 24 10 89 04 24 89 c6 <f3>
>> a5 8b 44 24 14 8b 54 24 18 8b 7c 24 1c 8b 6c 24 10 89 44 24
>> EIP: [<c027dbdf>] SS:ESP 0068:d28b3f54
>> ---[ end trace e760723794b1da56 ]---
>
> Always run with CONFIG_KALSYMS=y, so normal backtraces are on
> and nobody will waste time asking to enable it and enabling it.
>
Reproduced:
Restarting tasks ... done.
BUG: unable to handle kernel NULL pointer dereference at 00000000
IP: [<c027ee13>] synaptics_reconnect+0x1a/0x9b
*pde = 00000000
Oops: 0000 [#1]
last sysfs file: /sys/power/state
Modules linked in: arc4 ecb cryptomgr aead crypto_blkcipher
crypto_algapi ath5k mac80211 led_class cfg80211
Pid: 207, comm: kseriod Tainted: G A (2.6.28 #29) A1B
EIP: 0060:[<c027ee13>] EFLAGS: 00010282 CPU: 0
EIP is at synaptics_reconnect+0x1a/0x9b
EAX: 00000000 EBX: d2a16400 ECX: 00000006 EDX: c027edf9
ESI: 00000000 EDI: d28a3f64 EBP: d214ac80 ESP: d28a3f54
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process kseriod (pid: 207, ti=d28a2000 task=d287d0e0 task.ti=d28a2000)
Stack:
00000000 d214a7e0 c027bea8 d287d0e0 c01245ec d28a3f68 d28a3f68 d295e000
d295d800 d2a00e70 d2a00200 d2a16400 00000000 d214ac80 c027df50 d2a00200
d2a00200 d2a00270 c02762d6 d2a00200 00000246 d214ac80 c02767bb d28a3fb4
Call Trace:
[<c027bea8>] atkbd_set_leds+0x4e/0xdd
[<c01245ec>] autoremove_wake_function+0x0/0x2d
[<c027df50>] psmouse_reconnect+0x81/0x10c
[<c02762d6>] serio_reconnect_port+0x21/0x47
[<c02767bb>] serio_thread+0x105/0x2a0
[<c01245ec>] autoremove_wake_function+0x0/0x2d
[<c02766b6>] serio_thread+0x0/0x2a0
[<c01242ff>] kthread+0x36/0x5a
[<c01242c9>] kthread+0x0/0x5a
[<c010382f>] kernel_thread_helper+0x7/0x10
Code: 3b c0 31 c0 c7 47 58 b3 20 3b c0 5e 5b 5e 5f 5d c3 55 57 56 53
83 ec 28 fc b9 06 00 00 00 89 c3 8b 00 8d 7c 24 10 89 04 24 89 c6 <f3>
a5 8b 44 24 14 8b 54 24 18 8b 7c 24 1c 8b 6c 24 10 89 44 24
EIP: [<c027ee13>] synaptics_reconnect+0x1a/0x9b SS:ESP 0068:d28a3f54
---[ end trace da78f1dea9902482 ]---
--
Patrizio Bassi
http://www.patriziobassi.it
http://piazzadelpopolo.patriziobassi.it
2008/12/28 Patrizio Bassi <[email protected]>:
> 2008/12/25 Alexey Dobriyan <[email protected]>:
>> On Thu, Dec 25, 2008 at 09:25:38PM +0100, Patrizio Bassi wrote:
>>> Call Trace:
>>> [<c027ac74>] 0xc027ac74
>>> [<c0124598>] 0xc0124598
>>> [<c027cd1c>] 0xc027cd1c
>>> [<c02750a2>] 0xc02750a2
>>> [<c0275587>] 0xc0275587
>>> [<c0124598>] 0xc0124598
>>> [<c0275482>] 0xc0275482
>>> [<c01242ab>] 0xc01242ab
>>> [<c0124275>] 0xc0124275
>>> [<c0103823>] 0xc0103823
>>> Code: 37 c0 31 c0 c7 47 58 1c 87 37 c0 5e 5b 5e 5f 5d c3 55 57 56 53
>>> 83 ec 28 fc b9 06 00 00 00 89 c3 8b 00 8d 7c 24 10 89 04 24 89 c6 <f3>
>>> a5 8b 44 24 14 8b 54 24 18 8b 7c 24 1c 8b 6c 24 10 89 44 24
>>> EIP: [<c027dbdf>] SS:ESP 0068:d28b3f54
>>> ---[ end trace e760723794b1da56 ]---
>>
>> Always run with CONFIG_KALSYMS=y, so normal backtraces are on
>> and nobody will waste time asking to enable it and enabling it.
>>
>
> Reproduced:
>
> Restarting tasks ... done.
> BUG: unable to handle kernel NULL pointer dereference at 00000000
> IP: [<c027ee13>] synaptics_reconnect+0x1a/0x9b
> *pde = 00000000
> Oops: 0000 [#1]
> last sysfs file: /sys/power/state
> Modules linked in: arc4 ecb cryptomgr aead crypto_blkcipher
> crypto_algapi ath5k mac80211 led_class cfg80211
>
> Pid: 207, comm: kseriod Tainted: G A (2.6.28 #29) A1B
> EIP: 0060:[<c027ee13>] EFLAGS: 00010282 CPU: 0
> EIP is at synaptics_reconnect+0x1a/0x9b
> EAX: 00000000 EBX: d2a16400 ECX: 00000006 EDX: c027edf9
> ESI: 00000000 EDI: d28a3f64 EBP: d214ac80 ESP: d28a3f54
> DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
> Process kseriod (pid: 207, ti=d28a2000 task=d287d0e0 task.ti=d28a2000)
> Stack:
> 00000000 d214a7e0 c027bea8 d287d0e0 c01245ec d28a3f68 d28a3f68 d295e000
> d295d800 d2a00e70 d2a00200 d2a16400 00000000 d214ac80 c027df50 d2a00200
> d2a00200 d2a00270 c02762d6 d2a00200 00000246 d214ac80 c02767bb d28a3fb4
> Call Trace:
> [<c027bea8>] atkbd_set_leds+0x4e/0xdd
> [<c01245ec>] autoremove_wake_function+0x0/0x2d
> [<c027df50>] psmouse_reconnect+0x81/0x10c
> [<c02762d6>] serio_reconnect_port+0x21/0x47
> [<c02767bb>] serio_thread+0x105/0x2a0
> [<c01245ec>] autoremove_wake_function+0x0/0x2d
> [<c02766b6>] serio_thread+0x0/0x2a0
> [<c01242ff>] kthread+0x36/0x5a
> [<c01242c9>] kthread+0x0/0x5a
> [<c010382f>] kernel_thread_helper+0x7/0x10
> Code: 3b c0 31 c0 c7 47 58 b3 20 3b c0 5e 5b 5e 5f 5d c3 55 57 56 53
> 83 ec 28 fc b9 06 00 00 00 89 c3 8b 00 8d 7c 24 10 89 04 24 89 c6 <f3>
> a5 8b 44 24 14 8b 54 24 18 8b 7c 24 1c 8b 6c 24 10 89 44 24
> EIP: [<c027ee13>] synaptics_reconnect+0x1a/0x9b SS:ESP 0068:d28a3f54
> ---[ end trace da78f1dea9902482 ]---
>
>
it seems that after resume i can use the machine but i cannot shutdown it.
when i try to reboot or halt, gentoo script hangs in remounting / in r-o mode.
doesn't happen if i don't hibernate. i don't know if it's related. i
see nothing in the console/kernel logs.
--
Patrizio Bassi
http://www.patriziobassi.it
http://piazzadelpopolo.patriziobassi.it
2008/12/28 Patrizio Bassi <[email protected]>
>
> 2008/12/28 Patrizio Bassi <[email protected]>:
> > 2008/12/25 Alexey Dobriyan <[email protected]>:
> >> On Thu, Dec 25, 2008 at 09:25:38PM +0100, Patrizio Bassi wrote:
> >>> Call Trace:
> >>> [<c027ac74>] 0xc027ac74
> >>> [<c0124598>] 0xc0124598
> >>> [<c027cd1c>] 0xc027cd1c
> >>> [<c02750a2>] 0xc02750a2
> >>> [<c0275587>] 0xc0275587
> >>> [<c0124598>] 0xc0124598
> >>> [<c0275482>] 0xc0275482
> >>> [<c01242ab>] 0xc01242ab
> >>> [<c0124275>] 0xc0124275
> >>> [<c0103823>] 0xc0103823
> >>> Code: 37 c0 31 c0 c7 47 58 1c 87 37 c0 5e 5b 5e 5f 5d c3 55 57 56 53
> >>> 83 ec 28 fc b9 06 00 00 00 89 c3 8b 00 8d 7c 24 10 89 04 24 89 c6 <f3>
> >>> a5 8b 44 24 14 8b 54 24 18 8b 7c 24 1c 8b 6c 24 10 89 44 24
> >>> EIP: [<c027dbdf>] SS:ESP 0068:d28b3f54
> >>> ---[ end trace e760723794b1da56 ]---
> >>
> >> Always run with CONFIG_KALSYMS=y, so normal backtraces are on
> >> and nobody will waste time asking to enable it and enabling it.
> >>
> >
> > Reproduced:
> >
> > Restarting tasks ... done.
> > BUG: unable to handle kernel NULL pointer dereference at 00000000
> > IP: [<c027ee13>] synaptics_reconnect+0x1a/0x9b
> > *pde = 00000000
> > Oops: 0000 [#1]
> > last sysfs file: /sys/power/state
> > Modules linked in: arc4 ecb cryptomgr aead crypto_blkcipher
> > crypto_algapi ath5k mac80211 led_class cfg80211
> >
> > Pid: 207, comm: kseriod Tainted: G A (2.6.28 #29) A1B
> > EIP: 0060:[<c027ee13>] EFLAGS: 00010282 CPU: 0
> > EIP is at synaptics_reconnect+0x1a/0x9b
> > EAX: 00000000 EBX: d2a16400 ECX: 00000006 EDX: c027edf9
> > ESI: 00000000 EDI: d28a3f64 EBP: d214ac80 ESP: d28a3f54
> > DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
> > Process kseriod (pid: 207, ti=d28a2000 task=d287d0e0 task.ti=d28a2000)
> > Stack:
> > 00000000 d214a7e0 c027bea8 d287d0e0 c01245ec d28a3f68 d28a3f68 d295e000
> > d295d800 d2a00e70 d2a00200 d2a16400 00000000 d214ac80 c027df50 d2a00200
> > d2a00200 d2a00270 c02762d6 d2a00200 00000246 d214ac80 c02767bb d28a3fb4
> > Call Trace:
> > [<c027bea8>] atkbd_set_leds+0x4e/0xdd
> > [<c01245ec>] autoremove_wake_function+0x0/0x2d
> > [<c027df50>] psmouse_reconnect+0x81/0x10c
> > [<c02762d6>] serio_reconnect_port+0x21/0x47
> > [<c02767bb>] serio_thread+0x105/0x2a0
> > [<c01245ec>] autoremove_wake_function+0x0/0x2d
> > [<c02766b6>] serio_thread+0x0/0x2a0
> > [<c01242ff>] kthread+0x36/0x5a
> > [<c01242c9>] kthread+0x0/0x5a
> > [<c010382f>] kernel_thread_helper+0x7/0x10
> > Code: 3b c0 31 c0 c7 47 58 b3 20 3b c0 5e 5b 5e 5f 5d c3 55 57 56 53
> > 83 ec 28 fc b9 06 00 00 00 89 c3 8b 00 8d 7c 24 10 89 04 24 89 c6 <f3>
> > a5 8b 44 24 14 8b 54 24 18 8b 7c 24 1c 8b 6c 24 10 89 44 24
> > EIP: [<c027ee13>] synaptics_reconnect+0x1a/0x9b SS:ESP 0068:d28a3f54
> > ---[ end trace da78f1dea9902482 ]---
> >
> >
>
> it seems that after resume i can use the machine but i cannot shutdown it.
> when i try to reboot or halt, gentoo script hangs in remounting / in r-o mode.
>
> doesn't happen if i don't hibernate. i don't know if it's related. i
> see nothing in the console/kernel logs.
Hi All,
several days passed but i got no notification, should i open a bugzilla entry?
Thanks
--
Patrizio Bassi
http://www.patriziobassi.it
http://piazzadelpopolo.patriziobassi.it